OSB: endpoint mailId in business is not being overwritten by To in proxy .

Hi,
I am trying to send email through OSB .for this ,i created a proxy service and business service,both are of messaging type. In proxy service, i have routing which is routing to biz servie. and in request pipeline, i have added Transport Header action and added three header 1. To with value as "[email protected]" 2. subject as "sub" and 3.ContentType as "text/html". In business service , i have given endpoint uri as "mailto:[email protected]" which is mandatory tab to be filled. When i am sending email, it is always goint to the address which is given in business service([email protected]) , not to the address which is being passed from proxy service ("ash.gmail.com").

you're sure the xpath expression is correct?
when you first do an assign of the xpath to mailToVar and check in the sb testconsole if it assigns the value correctly ?
and then use this var in the transport header settings
i'm pretty sure i did a testcase for the osb book with the transportheader settings and mail transport,

Similar Messages

ITunes match music not being overwritten

The music I have downloaded to my iPhone 4s cannot be deleted manually I know (iOS 6.0.1). But now the problem is it is not being deleted automatically. My phone is now stuffed full and I can't download any new music, apps or take any photos or video. Is there a solution to this please?

Hello AsgardFleet82,
After reviewing your post, I have located an article that can help with iTunes Match. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
How to troubleshoot iTunes Match
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Business Content not Loaded?

Hi Folks,
Is it possible that during a BI install certain business content does not get loaded into the system? Is there a way to reload missing business content. The problem I have is as follows:
When activating business content cube 0CRM_C08 with data flow after I get an error while collecting business content. The error is
"Object 0PH_C01 (InfoCube,CUBE) could not be collected for object 8GKZ2KVI3EB2XK75QSDO85Q4Z (Query,ELEM)"
Now when I go to take a look at the available cubes in the meta data repository 0PH_C01 does not exist.
Anyone else have similar issues with business content not being loaded in the system? I find that I have this problem in both our BI7.0 system and our BI 7.0 IDES system
Thanks.

HI
I have checked in my system also. 0CRM_C08 This InfoCube contains date about the CRM activity items. It is based on the Activity Items ODS object (technical name: 0CRM_ACTI).
As you mentioned like that The cube is not based on the another cube(0PH_C01). And it is not available in Metadata Repository also.
May be you are looking in wrong way. Please check it once again.
Any furhter questions are there please let me know.
Thanks & Regards,
Nagaraju.V

OSS note 1480794 for the "Steps to Create endpoints using a "Business Conf

Hi All,
I am nearly complete with the Duet Setup Wizzard but I do still have a few red lights on my check tool.
My main problem is:
When I follow the instructions in OSS note 1480794 for the "Steps to Create endpoints using a "Business Configuration Scenario" XML:"
When I press activate I get the below errors:
Unknown webservice definition with name CustomerERPBasicDataByIDQueryResponse_In_V2 / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonByIDAndContactPersonInternalIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPBasicDataUpdateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCancelRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCreateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPByIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonUpdateRequestConfirmation_In_V1 / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name MaterialBasicDataByIDQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantItemByVariantIdentifyingElementsQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
I have restarted the Wizzard a few times to check my setup and I cant find any steps that I have missed that would cause these error's.
Hope you can advise.
Many Thanks
Mike

Hi Sameh,
do you want to go live with the full scope of Starter Service , or do you just needs part of it?
With the steps outlined in the blog everything is 100% supported (this is not a hack, but just another way to configure Starter Services).
However, not all the functionality of the Starter Services will work (e.g. like the Updating / Creation of a new contact). But if you do not need that you are perfectly fine.
I remember that with EhP4 you need to be on SP06 of ECC-SE. Maybe this is also the reason in your case why the service is not available.
Regards,
Holger.

Business Role changes not being provisioned

Guys (and girls),
We're having the issue that whenever we change something to a business role in IdM 7.1 SP5, like adding or removing a technical role (SAP role) the change isn't provisioned to the system authomatically resulting in users not being updated.
The workarround now is to change a business role and then remove it from a user and add it to that user again. Works ok when you're dealing with only a few users but I'm not looking forward to the day our basic role needs updating.
Same thing goes for changing users telephone number or SNC name or the likes.
I'm not sure if the two issues are related but am I missing an assignment of a task somewhere?
Cheers,
Jonathan

Jonathan,
I think so, but a pretty simple one to fix.
I would do one of two things:
1. Put a MODIFY task on MXREF_MX_ROLE or whatever attribute you're holding roles in. Have this task do a role reconcilation.
2. As a part of the workflow, have a role reconciliation execute.
On the whole, I prefer the second option. Don't like adding baggage onto the MXREF attributes. Just keeps things running more efficiently.
By role reconciliation, I mean executing the functions/tasks needed to reassert the roles on the user. I think there's a built in scripting function to do this or you can automate the add/remove functionality you described in your message, holding the role MSKEYs in a temporary attribute.
Matt

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

Inovice is not being importe while running Request :Payables Open Interface

Dear
We are on release on R12, We need to import legacy invoice into oracle e-business thought import program,
Right now we are working on to import invoice through subject mentioned request, but after running this request
System is not being import invoice and showing message as below mentioned.
I have also mentioned insert query through do this.
We are on release on R12, We need to import legacy invoice into oracle e-business thought import program,
Right now we are working on to import invoice through subject mentioned request, but after running this request
System is not being import invoice and showing message as below mentioned.
I have also mentioned insert query through do this.
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
insert into AP_INVOICES_INTERFACE (
invoice_id,
workflow_flag,
invoice_num,
vendor_id,
vendor_site_id,
invoice_amount,
INVOICE_CURRENCY_CODE,
invoice_type_lookup_code ,
invoice_date,
gl_date,
DESCRIPTION,
-- PAY_GROUP_LOOKUP_CODE,
source,
org_id )
values ( 132277,
'D',
'INV100',
'1401',
'192',
1200.00,
'PKR',
'STANDARD',
sysdate,
sysdate,
'This Invoice is created for test purpose',
-- 'WUFS SUPPLIER',
'Manual Invoice Entry',
82 );
3cs test scenario
insert into AP_INVOICE_LINES_INTERFACE (
invoice_id,
line_number,
line_type_lookup_code,
amount )
values (132277,
1,
'ITEM',
1200.00
appreciate your response
--thanks

Thanks for reply,
As you mentioned regarding operating unit, we were passing it throught backe-end and fron as well, but still the same error appearing, and we need to do this asap, becuase we are going to live and we don't have much time.
Kindly any body can guide me to reslove this problem,

Business Catalyst Not Working

I have an Adobe Cloud full paid monthly account. I have used Business Catalyst to preview sites for clients for about a year and a half or more.
I did not use it for a few months and then recently tried to use it again.
Every time I try to upload my new site to BC and try to login it says "unknown error." I have reset password twice but password is correct.
Tech support at Business Catalyst is not being helpful except to ask me what software I'm using and my login:
I use Muse.
What is going on? I thought that my monthly $50 to Adobe included a free Business Catalyst account? No?
The help and FAQ pages never seem to answer the questions I have.
I log in to my Adobe account okay but I can't seem to log in to BC.
BC first forced me to change my account password. Then they said that I had to change it back to my Adobe ID password.
Now each time I try to log in it says there is already an account with that email.
I think I'm going to lose my mind.
Customer/Tech support at other cloud systems is not this difficult to get through to.
Max Mitchell

Getting this error message: This Adobe ID email address is already registered with Business Catalyst and cannot be merged with a different Business Catalyst account.

Business area not updated in one plant

hi frends,while posting a document with moment type 543 through MB0a after GR i am not getting the business area in the acc doc in one of the plants....for other plant the business area is being fecthed...i tried dubugging found one FM k_cobl_check in fm cobl_codingblock_check where the business area is not getting updated....
please help...

I am working on ECC 6.0.
Document Splitting is Not activated in my system. Is it possible through any validation
Mann

Vendor invoice - Profit Center not being pulled from cost-center

Hi Guys,
Please help me out with this:
On the vendor expense line item, i am using an account which has a Field status group which is cost center - optional, business area - required and profit center - required. The cost center master has the profit center and business area both populated.
But when i try just populating the cost center on the expense line item, the profit center is not being populated automatically which it should. Can you please guide me what the problem can be? Is it in the field status group or maybe in the linking of the cost center and profit center.
Thanks for your help.
-MS

Hi,
Are you talking about vendor line item or expenses line item?
if you are talking about expense line item,check profit center is activated or not and validity period.
check profit center assignment in KS03 t.code.
if your talking about vendor line item,what version of SAP are you using?
if your using clasical GL and PCA,process T.code 1KEK - Transferring Payables/Receivables .
Hope this helps you.
Thanks,
Rau

Alerts not being sent

Alerts are currently only being sent if the person who created the alert is a recipient. This is a huge problem. Alerts are a big selling feature of Business One, however we just learned that alerts are not being sent unless the person that created the alert is also a recipient. We have clients who might send 75 - 100 alerts per day. Especially useful for sending email alerts to sales personnel or technicians in the field who do not have access to SAP Business One. To say that the person who created the alerts (normally manager) must be a recipient is not practical. Most clients have a user who must use the manager login so they get the alerts.
If this is the only solution, SAP should provide a free user that can only create and setup alerts thus would no longer be a problem

Yes I am sure and the following is the information received from SAP escalation pasted into this post
Case 1
Manager is logged in ONLY
Manager configures an alert and Sends the alert to Sophie( tick Email box )
Results => alert will not be received via email
Case 2
Manager is logged in ONLY
Manager configures an alert and Sends the alert to Sophie and Manager
Results => alert will be received via email by Sophie and manager as manager is one of the recipients.
Case 3
Manager is logged in ONLY
Sophie Logs in
Results => alert from Case 1+ 2 are received via email, as Sophie is a recipient
=> It seems that one of the recipients needs to be logged to B1 in order to trigger the email sending process.

Crystal Reports Excel Export Issue - page footer not being displayed

We recently converted all Crystal Reports from Visual Studio 2003 to Visual Studio 2005 sp1, .NET 2.0, Crystal Reports for .NET. I have the latest merge modules from business objects. All reports & footers worked fine in VS2003 ... but now when I export to PortableDocumentFormat (PDF) or WordForWindows (DOC) the page footers appear correctly. But, when I export to Excel (XLS) like the code below, the page footers do not appear. We need to place a disclaimer at the bottom of every page of an exported excel document. I checked the print preview, and I tested printing the document ... the the footer is not being utilized properly by the Crystal Reports export.
System.IO.MemoryStream oStream = new System.IO.MemoryStream() ;
oStream = (System.IO.MemoryStream) report.ExportToStream(CrystalDecisions.Shared.ExportFormatType.Excel) ;
Response.Clear() ;
Response.Buffer = true ;
Response.ContentType = "application/vnd.ms-excel" ;
Response.BinaryWrite(oStream.ToArray()) ;
Response.End();
I have asked the question in msdn forum
http://forums.msdn.microsoft.com/en-US/vsreportcontrols/thread/0ead9e34-bc45-4062-90dd-17f8f8ebf062

fyi - if i hadn't mentioned it, problem occurs in all our environments (developer workstation, development server, testing server, production server, etc.)
on my development workstation i found the file 3 times
c:\program files\common files\business objects\1.0\bin\crxf_xls.dll
has file version 9.1.1.557
c:\program files\common files\business objects\2.7\bin\crxf_xls.dll
has file version 10.2.0.1093
c:\program files\common files\business objects\3.0\bin\crxf_xls.dll
has file version 11.0.0.1937
on my development server (and our other environment servers too)
c:\program files\common files\business objects\2.7\bin\crxf_xls.dll
has file version 10.2.0.1210
so just from that i notice that the file versions in the 2.7 bin are different from my developer workstation to my development server ... but the issue still occurs in both places.

Outlook 2013 Free/Busy can not retrieve information

Currently have a problem with Outlook 2013 Free/Busy can not retrieve information.
All windows updates are installed.
Exchange 2007 is being used.
Problem started last week.
Already Tried without any progress:
1) Recreated profile (Fixed the issue for 1 week)
2) Cleanfreebusy ( No longer works for outlook 2013)
3) /Cleanreminders
4) Removed latest updates for outlook 10/02( As requested by Microsoft support, however we found users without this update installed, suffering from the problem)
5) Repaired OST file
6) Repaired Office 2013
Can anyone help it would be much appreciated?

Hi
As per the information and details provided by you, Outlook 2013 free/busy cannot retrieve information, please follow these steps: -
The user has never logged in
Before any free/busy information is available, the user must have at least a calendar. A calendar will not be created until a user logs into their account.
The option to publish at some location has been enabled in Calendar options
In all Outlook versions, the option to publish free/busy information must be unchecked. By default, this option is already unchecked.
This option is located under
Tools > Options > Preferences > Calendar Options > Free/busy Options.
Outlook is using cached browser information
Outlook Free/busy user HTTP, and therefore borrows information cached by Internet Explorer. It is required to clear the offline cache. This is located under
Tools > Internet Options > General. In the “Temporary Internet Files” section, choose the
“ Delete files” button.
Internet Explorer settings is not correct
AN Internet Explorer setting may prevent the .ics file from downloading via HTTPS. In Internet Exporer on the Outlook computer, go to
Tools > Internet Options > Advanced. In the Security section, the checkbox for “Do not save encrypted pages to disk” should be unchecked.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Standard business content not extarcting all data

Hello,
I am currently rolling out QN data. The standard business content for 2lis_05Q0task includes FECOD FEGRP & OTEIL (from table QMFE) fields however the data is not being pulled. All the other data is coming in ok. Is there something I need to do to get this data?
Thanks For your help
Mireille

Hi,
Pls Check in QMFE table if the data is present for these fields.
Take the notification no from the RSA3 extraction and
look for it in the QMFE table.
Rgds,
Ravindra.

OSB: endpoint mailId in business is not being overwritten by To in proxy .

Similar Messages

Maybe you are looking for