OSB proxy - MQ transport - return the message to MQ, on Business Service down/unavailable

My proxy is using MQ protocol to get the messages from MQ and processing the message and connecting the Business Service.
Is there anyway to send the message to back to MQ, If the Business Service is down. So the proxy will keep on try the message to processes until the BS is up
thanks

The problem is that the consumer application is picking up all files that appear in the directory. It doesn't matter what you put in.
We suggested that they use a file mask on the types of files that need to be picked up, but that seems to be a problem.
So all I want to know is, what is the behaviour of the file transport protocol as a business server and if there is any way to influence this.
And if my assumption is correct that the .a suffix is usd by the OSB while processing files.
Any extra documentation about the file transport protocol is welcome.
Thanks
Henk

Similar Messages

SOAP to proxy scenarion error An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP

Hi all
My scenario is soap to proxy scenario .while testing using soap to proxy i am getting " An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP: in sxmb_moni sap pi .
Some times this interface is failing and some time its successfully processing.
While testing with successful xml data also i am getting the same error in sxmb_moni.
I modified the proxy inbound code where passing error message and still i am getting the same message.
Please suggestion the same for error solving.
Regards
Ravi.

Hi,
I'm facing the same problem.
I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
FP_GET_LAST_ADS_TRACE return following:
Begin operation:
Render, elapsed time = 16 ms.
#   End operation: Render, elapsed time = 89 ms.
#   Begin operation: UsageRights, elapsed time = 89 ms.
#   End operation: UsageRights, elapsed time = 97 ms.#
...and the error string of FP_GET_LAST_ADS_ERRSTR is:
ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
Any idea what the problem might be?

How to return the message in MTI and bitmap?

Here we receive xml message from client but the problem is this coding is for the first time it receive MTI message, so how can i do if i receive from client in xml type then convert to MTI then response it as xml again to client.
Is it too hard to understand?????
     * Waits and receive an ISOMsg over the TCP/IP session
     * @return the Message received
     * @exception IOException
     * @exception ISOException
    public ISOMsg receive() throws IOException, ISOException {
        byte[] b=null;
        byte[] header=null;
        LogEvent evt = new LogEvent (this, "receive");
        ISOMsg m = createMsg ();
        Socket socket = getSocket();
        m.setSource (this);
        try {
            if (!isConnected())
                throw new ISOException ("unconnected ISOChannel");
            synchronized (serverIn) {//read byte/array of byte
                int len = getMessageLength();
                int hLen = getHeaderLength();
                if (len == -1) {
                    if (hLen > 0) {
                        header = readHeader(hLen);//read in message header
                    b = streamReceive();
                else if (len > 0 && len <= 10000) {
                    if (hLen > 0) {
                        // ignore message header (TPDU)
                        // Note header length is not necessarily equal to hLen (see VAPChannel)
                        header = readHeader(hLen);//header lenght read the message header
                        len -= header.length;
                    b = new byte[len];
                    serverIn.readFully(b, 0, len);//get the input from user with byte type,0 length into lenght,read the byte to server in.
                    getMessageTrailler();
                else
                    throw new ISOException(
                        "receive length " +len + " seems strange");
            *// TODO:*
*         // prefix with standard ISO MTI and bitmap*
            *// using ISOMsg setters*
            m.setPackager (getDynamicPackager(b));//msg receive
            m.setHeader (getDynamicHeader(header));
            if (b.length > 0 && !shouldIgnore (header)) // Ignore NULL messages
                m.unpack (b);//raw message
            m.setDirection(ISOMsg.INCOMING);//set the direction for incoming msg into isoMsg
            m = applyIncomingFilters (m, header, b, evt);//remove the incoming filter to isoMsg
            m.setDirection(ISOMsg.INCOMING);
            evt.addMessage (m);
            cnt[RX]++;
            setChanged();
            notifyObservers(m);
       catch {
        return m;
    }

check this link, and use as per you requirement
XI: How-to on JDBC receiver response
JDBC Receiver Adapter -- Synchronous Select Step by Step
Regards
Chilla

When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online. Do you still want to import the songs?" This has happened for four CD's in a row now, Eagles - Hotel California.

Hi All,
When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online. Do you still want to import the songs?" This has happened for four CD's in a row now. Today, after importing some other CD's in the regular way, all of a sudden, iTunes won't recognize the Eagles - "Hotel California" CD, the Eagles "**** Freezes Over" CD, "The Best of Roy Orbison" or "Milestones" by Miles Davis.
What happened? Anybody know?

We've gotten the same error at the same time. I guess we need to let this play out. In the meantime, I'm gonna update iTunes.

S_ALR_87011774 returns the message u0093Program 9PSM does not exist

Hi Dear Gurus,
I have been given a task to add a t-code to a role and i did that but when the user execute the transaction
the transaction S_ALR_87011774 returns the message Program 9PSM does not exist.
how to fix it.
i did run the SU53 report and it says
activity : 03
co trasaction rks
and these two are maintained in the object.
please help me how to resolve this issue.
Kind Regards,
vamsi,

as far as I can tell, it is not actually the program that does not exist, but the report group.
when changes have been made to the layout, it is sometimes necessary to regenerate them. this can be done through GR52.
I'm curious to know what the SU53 will display for the user who's executing the transaction, because I don't find a reason to assume this is related to authorizations?
for more info on report groups, have a look [over here|http://help.sap.com/saphelp_47x200/helpdata/en/5b/d2308343c611d182b30000e829fbfe/frameset.htm|sap help]
it may have something to do with logging on in a different language than the report was setup to be displayed in?
If reports are to be available in several languages,
you must define the languages concerned in Customizing.
For more information, see the Implementation Guide (IMG)
for Special Purpose Ledger under Information System ->
Define Report Writer Languages.
Edited by: Dimitri van Heumen on Feb 21, 2008 11:36 AM (messing up the layout...)

I cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Comma

i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
I tries and it doesnt work!!

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT1178 I bought Time Capsule specifically to back up my computer at work. Only my computer. I completed the steps the best of my knowledge but I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to

I bought Time Capsule specifically to back up my computer at work. Only my computer. There are many computers within my department. I completed the steps the best of my knowledge but was unsure of which option to click. I clicked "I want to create a new wireless network". At the onset the instructions said I needed to connect with an ethernet cable, which I did. But I have no desire to connect to the internet, print from it, or have others access. I did deselect guest options, and I did put in passwords. But at the end of the process I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to continue."
I was worried this would shut me down and I wouldn't be able to continue to work. I don't necessarily need to connect wirelessly. It is connected via ethernet cable from machine to device.
Can you advise me how to continue? Did I choose the wrong options?

I bought an external hard drive called "Seagate Backup Plus" From the Apple store to back up everything on my computer and anything new on my computer. It came with Time Machine. The external hard drive disk had 1 or 2 Terabytes. Time Machine says "next backup: When disk is connected." "Oldest backup: July 2, 2014." & Also "Latest back July, 2."

When I use Sync My Itunes I always get the message that Itunes is busy and to try again later. I'm trying to sync my Touch so I don't get the index is full message. Help.

I'm trying to use "Sync My Itunes" to use my Ipod Touch in my 2011 Ford Escape. I keep getting an index is full and all songs may not play message. When I use the "Sync My Itunes" I always get the message that Itunes is busy and to try again later. How do I get this to work? I can't reset my Ipod without losing all my 4,000+ tunes. Help!

The "Show iTunes in the Cloud Purchases" solution did not work for me, but this did:
In your iTunes library, make sure the "iCloud Download" column is showing (looks like a little cloud icon). Check for any songs that have a light gray cloud icon. Do whatever you need to do to make this icon disappear for that song (get iTunes to make sure it's downloaded onto your machine, or delete the song). Run Sync My iTunes again and it should finish.
Notes:
- Plugging in your iPhone/iPod might cause these songs to get copied back into your library, and you'll have to do this again.
- I didn't start having this problem until I bought Match
How I discovered this:
I noticed that it stopped every time at song #1242 in my library, so I ran "Sync My iTunes (Debug)" to see which song it stopped on. Then I went back to my library, found the song, and noticed it had the light gray cloud icon. It also had a local copy of the song already. I think iTunes gets confused sometimes and forgets that it downloaded a song from your cloud library, then tries to download it again even though it's already on your computer. Then it realizes the file's already there, and doesn't download it. However, it leaves it in your library flagged as an incomplete download. Sync My iTunes triggers iTunes to attempt download, which then makes it look like iTunes is busy. My theory at least...

Why do I get the message:"creative cloud files is currently down"

Why do I get the message:"creative cloud files is currently down"

The problem has been resolved.

Lync 2010 Mobile client can't connect to the server. it may be busy or temporarily unavailable

I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
unavailable"
PS I tried a lot of solutions from different articles, but the same result.
presented below my environment:
Two Lync 2010 frontend servers with one pool.
Two edges server.
HW load balancer.
Log from Lync connectivity analyzer.
User Name: [email protected]
Logging test parameters:
SIP Uri: [email protected]
Discovery Type: Automatic Discovery
Network access: NetworkAccessExternal
Selected client: ApplicationLyncMobile2010
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
Sending HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for unsecure (HTTP) internal channel
Sending HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured internal channel against
http://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to
https://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against
https://lyncdiscover.xxx.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to
http://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against
http://lyncdiscover.xxx.com/
None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at
http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

Hi
Is that Port 443 opened? check the fire wall.
is that external Lync clients are logging in with out any issues.
by seeing the Log it is unable to connect on port 443
Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting the Mobility issues follows this
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

OSB: Proxy doesn't consume JMS messages

Guys, I'm getting stuck with this one ...
I've got four JMS proxy services. One of them uses Publish to enqueue a message into the three others. This way I get three copies of a single message, each in dedicated JMS queue. The same three JMS proxies are supposed to consume messages from JMS queues and process them. The configuration is the same for all three proxies and all three JMS queues. In fact all was cloned and the difference is only in suffix. So, I've got QueueA, QueueB, QueueC and ProxyA, ProxyB and ProxyC. So if I stick to these names, ProxyMain uses 3x Publish actions to enqueue a message into ProxyA, ProxyB and ProxyC at the same time. This is a proved solution and it has worked for years flawlessly!
However, something weird happened a couple of days ago. All of a sudden, one of those three consuming JMS proxies doesn't consume anything. There's no issue on producing side (the first proxy) as the numbers of messages in all three queues are still increasing. Still, only messages from QueueA and QueueB are being consumed by ProxyA and ProxyB. The third queue (QueueC) doesn't have any consumer attached from ProxyC and I don't know why.
I've already checked everything I know - proxy is enabled, there are no errors in logs related to the proxy or JMS, the issue is not reproducible in test environment with the same configuration, there are no JMS Quota or connection factory restrictions, consuming flag is enabled on queue ...
The lack of errors in logs makes me feel like the ProxyC is connected to something else. However, the same proxy is used for producing messages (from ProxyMain) and messages are incoming to the queue so the endpoint set in proxy must be correct!
Any help, hint or idea is appreciated ...

The third queue (QueueC) doesn't have any consumer attached from ProxyC and I don't know whyTry renaming ProxyC to say ProxyC1 and activate the session. This will create a new underlying MDB for the jms proxy and you will see consumers getting set on the queue.. Faced this issue many times in our production environment and easiest workaround we found was to rename the proxy service [ toggling enable/disable proxy doesn't seem to have ny effect).. you can change the name to the original proxy once the consumers are set..

How to purchase "gems" on clash of clans when getting the message please contact iTunes support services when trying to buy?

How do I fix or make it able to buy gems on clash of clans when the message comes up "please contact iTunes support to complete transaction ? I have purchased before but it's not allowing me now. Would really love some insight on how to correct or fix the problem, thanks Ryan Hinger

Have you considered doing exactly what it told you to do?
Contact itunes support

I'm connected to the internet but I keep getting the message cannot connect to web services

When I Scan to Email in my Photosmart 7520 all-in-one printer, I get the message, "Unable to connect to web services. Confirm internet access and try again."

Hello @Skrafty,
Welcome to the HP forums.
I understand that you are having a problem with the scan to email feature on your Photosmart 7520.
I would like to help.
Touch the ePrint icon on your printers display.
If you get the same server connection error, Try setting a manual DNS.
The following link is to a post by happytohelp01.
It contains instructions for setting a manual DNS.
Efax 7510 still won't work after turning off/on ePrint several times
If you do not get a server connection, then I would remove Web Services and enable again.
Warning: If you remove web services the printer will lose its custom ePrint address.
This address will be lost forever. It will also wipe out any scan to email settings.
To remove Web Services, touch the ePrint icon.
Go into settings and select Remove Web Services.
You will be brought back to the printers main menu.
Touch the ePrint icon again and enable the feature.
Once you get the printers claim code (used to customise the ePrint address) you can setup scan to email again.
If you encounter any issues or have additional questions please let me know.
Also you can call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How to get the request xml string in Business service.

Hi
I have following requirement
1) XAI inbound service will get a input xml request feed and call the Business Service.
2) Business service will do some validation and do the insert in the database.
My BS schema is as below
<schema pageAction="change">
<personId mapField="PER_ID"/>
<personOrBusiness mapField="PER_OR_BUS_FLG"/>
<name mapField="ENTITY_NAME" mdField="C1_ENTITY_NAME"/>
<emailAddress mapField="EMAILID"/>
<city mapField="CITY"/>
<county mapField="COUNTY"/>
<postal mapField="POSTAL"/>
<houseType mapField="HOUSE_TYPE"/>
<taxVendorGeographicalCode mapField="GEO_CODE"/>
<isInCityLimit mapField="IN_CITY_LIMIT"/>
<state mapField="STATE"/>
<version mapField="VERSION"/>
<division mapField="CIS_DIVISION"/>
<accessGroup mapField="ACCESS_GRP_CD"/>
<address1 mapField="ADDRESS1"/>
<personCharacteristic type="list" mapList="CI_PER_CHAR">
<personId mapField="PER_ID"/>
<characteristicType mapField="CHAR_TYPE_CD"/>
<characteristicValue mapField="CHAR_VAL"/>
<effectiveDate mapField="EFFDT"/>
<adhocCharacteristicValue mapField="ADHOC_CHAR_VAL"/>
<characteristicValueForeignKey1 mapField="CHAR_VAL_FK1"/>
<characteristicValueFK2 mapField="CHAR_VAL_FK2"/>
<characteristicValueFK3 mapField="CHAR_VAL_FK3"/>
<characteristicValueFk4 mapField="CHAR_VAL_FK4"/>
<characteristicValueFK5 mapField="CHAR_VAL_FK5"/>
</personCharacteristic>
</schema>
The request XML to BS is as below_
(support.schema.AbstractSchemaBasedDispatcher) Performing page:change of BusinessService CM_SPRDSHT_BS' (service='CMSPRDHSHTUPLD'), with input request
<?xml version="1.0" encoding="UTF-8"?>
<CM_Person>
<personOrBusiness>P</personOrBusiness>
<name>Marsh,Corporate</name>
<emailAddress>[email protected]</emailAddress>
<city>Tampa</city>
<country>USA</country>
<postal>2131</postal>
<houseType/>
<taxVendorGeographicalCode/>
<isInCityLimit/>
<state>CA</state>
<version>1</version>
<division>930</division>
<accessGroup>***</accessGroup>
<address1>Address of Khan</address1>
</CM_Person>
I can access the values of each xml node in BS with the help of data item.
I wanted to know how can I get the above request xml string in my Business Service in Java.

{color:#0000ff}http://java.sun.com/javase/6/docs/api/java/lang/Integer.html#parseInt(java.lang.String)
http://java.sun.com/javase/6/docs/api/java/lang/Integer.html#valueOf(java.lang.String){color}

Why does my LabVIEW Run-time server return the message "source does not exist Last UI message: Start Execution"?

I am trying to build a stand-alone application on a target pc for which I have built a LabVIEW server that TestStand can use as an adapter.
In order to do this, I searched this site and found the topic: "How do I build and Use the LabVIEW Operator Interface as a LabVIEW ActiveX Run-time server?" After following the procedure to the letter, I ran the testexec.exe file as instructed and loaded my sequence file. As soon as I try to "Single Pass" or "Test UUT" I get an error which says "source does not existLast UI message: Start Execution". This error appears when running the testexec.exe file on the target pc or the development pc.
I have found though, th
at if I open the Operator interface through the Start: Programs>National Instruments>TestStand>Operator Interfaces>LabVIEW then the sequence file runs without these errors.
Any ideas why this is happening?

Hello Robroy,
The KB you mentioned explaines how to build the LV Operator Interface (OI). So, I assumed you built the LV OI and also configured the LV adapter to use the TestStandGUILVRTS server without problems.
The error you are getting may be due to missing VIs. In other words, the LabVIEW OI may not be finding all the VIs your sequence is calling.
In order to deploy sequences that call VIs, you need to first run Tools >> Assemble VIs for Runtime Distribution. This tool gets all the VIs your sequence needs and saves in a separate directory.
For more information, you may check the TestStand User Manual chapter 17, it describes how to distribute TestStand and sequences.
Regards,
Roberto Piacentini
Applications Engineer
National Inst
ruments
www.ni.com/ask

OSB proxy - MQ transport - return the message to MQ, on Business Service down/unavailable

Similar Messages

Maybe you are looking for