OTA_DELEGATE_BOOKINGS which column holds the customer's id

Hi,
Can someone tell me which column in OTA_DELEGATE_BOOKINGS table hold the customer's id to identify the classes he registered in. e.g. How do I find out what classes some specific customer have enrolled. e.g. if there's a customer with id=1234 and he enrolls in some class which column in ota_delegate_bookings does it store the id of the customer.
Thanks

Take a look on eTRM* on MetaLink. This will describe the tables and views in OLM.
Regards
Tim

Similar Messages

Which table holds the Shopping Cart Approval Manager Name

Can any one please let me know which table holds the Approving Manger Name. Please find the scenario below.
Employee creates the Shopping Cart and forward the SC for Approval to Approval Manger. But approval manager will take some time to approve the shopping cart. I need to extract the approving manager's name who has still not approved the shopping cart into SAP BW.
Thanks in Advance.
Regards
Venkata Agraharam.

Hi,
This is not answer. Just feedback from my project experience.
I know some customer developed this kind of report which shows approver but they used the report only the first 1 month after go live. Approval monitoring was fun but you need someone who monitor it. Finally they realized high monitoring admin cost. Final solution was Alert Notification with BBP_ALERTING BADI which sends email to approver and admin when deadline is reached.
Regards,
Masa

Which table holds the reserved stock

Hi All,
In report - MMBE there are two columns unrestricted stock and reserved stock. Can you kindly share how this reserved stock is calculated which table/field holds the reserved stock. If I run the MMBE report now if it is determining the reserved stock assuming it comes from RESB which holds reservations what field in RESB gives me the reserved stock and how many days or what logic does MMBE use to calculate the reserved stock.
Thanks
Karen

hi KarenFarr .. check out this tables
Table MCHB , MSLB
regards
chinnaiya

Which table holds the link between Purchase requisition and Reservations ?

Hi Guys,
We are using MRP and as a result of the MRP run the reservations are converted to purchase requisition. When i look at transaction MD04 it shows me the Purchase requisition against a reservations.
I would like to know which table holds this information? I mean which table will give me the reservations tied to a purchase requisition or vice a versa.
I have looked into RESB and RSBD but could not find what i am looking at. RESB table has BANFN field for purchase requisition but this field is not populated. RSBD table hold the Purchase requisition and reservations but it only holds the relation for Direct procurement and not for all.
Any idea where i can find the Preq and Reservations created through MRP run?
Thanks
VJ

Try RKPF..
thanks
jz

KLH1 - Which table holds the data?

Hi, I'm looking for the table that holds the "Activity Type Groups" that are created under transaction KLH1.
Any ideas where I can find this info?
Thanks,

Hello Graeme,
Check the tables:
COEJL                          CO Object: Line Items for Activity Types (
COEPL                          CO Object: Line Items for Activity Types (
COKL                           CO Object: Control Data for Activity Types
COSL                           CO Object: Activity Type Totals
COSLD                          CO Object: Activity Type Totals - of Which
If useful please reward.
Vasanth

Which table holds the position ID

Hello
Just a quick question. I have restricted access to PA30/PA40. I want to searc for an employee and find out the position ID
Which table holds it? I want it to map the roles to positions
Thanks

Hello Jack,
If you have restricted access to use PA20, then you would also have some restrictions for using transaction PPOME.
If you search for PPOM / PPOME then you will find some more information on them to assign roles to positions.
Cheers,
Julius
PS: Do you have a SAP Service Marketplace ID now?

Which column raised the exception?

SQL> desc test
Name Null? Type
A NUMBER(5)
B VARCHAR2(10)
SQL> insert into test values(1,'abcdefghijkl');
insert into test values(1,'abcdefghijkl')
ERROR at line 1:
ORA-01401: inserted value too large for column
How do I know that which column/value raised this exception? In this case, is there a way to identify that the column "B" has raised this exception?

What version of oracle are you running? Here is a run on 10.2
SQL> desc afb
A VARCHAR2(1)
B VARCHAR2(2)
C VARCHAR2(3)
SQL> select version from v$instance;
VERSION
10.2.0.1.0
SQL> insert into afb values ('A','BBB','CC');
INSERT INTO AFB VALUES ('A','BBB','CC')
ERROR at line 1:
ORA-12899: value too large for column "TEST"."AFB"."B" (actual: 3, maximum: 2)
The error message tells you. In prior versions you could tell in pro from the indicator variable and OCI had a similar method, but in straight SQL you were more or less out of luck.

Which column gives the complete db run time in RSDDSTAT ?

Hello community,
On table RSDDSTAT, which column gives me the complete db run time?
Is it QDBSEL + QDBTRANS? Or is it QTIMEOLAPINIT + QTIMEOLAP + QTIMEBD + QTIMEVARDP + QTIMECLIENT? Or perhaps something else?
Thanks very much !

hi keith,
check this field <b>QRUNTIMECATEGORY</b>
hope it helps
bhaskar.

Tax Column on the Customer Line Item Report

Hi All
We need a report for AR that has the fields : Business Area, Customer, Document Type, Document Number, Clearing Document(if any), Currency, Posting date, Amount, tax amount, payment amount, due date, payment date..
I tried the standard report (FBL5n) but it doesnt have the fields 'tax amount' and 'cleared amounts' - so I tried to join the BSID
and BSAD table in a query - which again times out...
Is there another table I can map and or when using table(s) BSID and BSAD - what should be my join conditions..?
Thank you
Rukshana

Please search the forum before posting your question. This question has been asked several times.
BSET does not maintain the values with respect to the Line Items. So it is not possible to combine the values from BSET with line item reports. You'll have to write a custom (Z-Report) report to cater your needs.
Ravi.

Is there no way to hold the customer service department accountable when give wrong information and charged for it?

We have been loyal Verizon customers for almost a decade and have had nothing but great things to say about our service...until about 2 months ago. Two months ago my daughter moved out of state and decided to remove herself from our family plan, Before doing so, she call Verizon's customer service department to see when her contract was up. She wanted to keep her Verizon service until the end of her contract to avoid the termination fee. The service department assured her that her contract was already up and no termination fee would be charged. You can imagine my surprise when we were charged a $138 termination fee for her line on our next bill. I called customer service again and spoke with another representative (whose name I will not disclose) and was assured that the termination fee was a mistake and that I should simply not pay that portion of the bill and the charge would disappear on the next billing cycle. I did as she said and was shocked a few weeks later when I received a less than civil call from Verizon threatening to terminate my service the next day if I did not immediately pay the $138. My wife received a similar nasty message on her phone. I explained the situation to the rep on the phone, was told that the information my daughter and I received from 2 previous representatives was incorrect, and was told to pay immediately. My daughter and I went through all the proper channels to ensure no charges from termination fees, and both of us were given misinformation on 2 separate occasions. Is there any way to hold this company accountable for its mistake? I have been in sales all my life, and if an incorrect price is quoted, I have to honor the incorrect price,even if it costs me money. This is the worst customer experience I have ever had with any company, and I'm afraid that it will eventually cost Verizon not one but five long-time customers.

I shouldn't have to "chalk it up". This company, like other companies, should be held accountable for wrong information. We went through all the proper channels to ensure this wouldn't happen. I know this fee gets waived on a regular basis for a multitude of reasons. Moving nonwithstanding, I was told by two different people who had no knowledge that my daughter was moving that she owed nothing. If two different company employees tell me there will be no ETF, I will take them at their word. This should be good enough. What's the point of getting it reactivated if she can't use it where she lives now?

Add columns in the existing Customer table in a Subject Area

Hi All,
Well I need to add two columns from Sales table(new table i created which has customer Id) and join it to the Customer Table which has the Customer Id and several columns. The Customer table was already in the RPD which has all the customer information. Now that i have this new requirement to add few columns from the Sales table to the Customer table in one Subject Area.
What i have done so far is that I imported the sales table into the rpd, made a join in PHYSICAL LAYER on the customer ID of the Sales table to the Customer id of the Customer table and simply dragged the sales table to the Customer LTS in the BMM layer(NO MORE JOINS IN BMM)and dragged and dropped the same into the Presentation layer. The customer table is linked to one fact table in that subject area. So i thought that dragging the sales table columns in the customer table LTS will work because customer is linked to one fact in that subject area.
Now, In the Answers when I dragged columns from customer & sales table I see only one record that is the first customer_id record from my Sales table but i know there are many common customer_ids between those two tables but its only picking the first customer id from the sales table.
Any help will be appreciated..
Normally if we need to add some columns to the existing tables in one subject area what is the best approach??

Hi Balajee,
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
for more information check with these links
ADDING NEW FIELDS IN me21n
ADDING NEW FIELDS IN me21n - (Screen exit / enhancment)
hope this will useful to you.
Regards!

We need to pass the customer id from Parent BO report to Child BO report.

Hello Experts
We are using SAP BI BO 4.1 for Business Objects and SAP BW 7.3 as BW Backend.
Requirement: We need to pass the customer id from Parent BO report to Child BO report.
Issue: Customer (0CUST_SALES__CUSTOMER) Characterisitic is used where in the display characteristic is set to Key i.e 'Display As "Key" ' But the In BO the Dimension appreas as Text .
I have tried out by changing the display characteristic as KEY/ TEXT/ KEY & TEXT but still at the BO end the it is displayed as TEXT.
Workaround Tried: I have used the detailed object for the Dimension 0CUST_SALES__CUSTOMER- key in SAP BO i.e the key value where in we are able to view the customer ID. But we are unable to pass the value from parent report to child report as the query level Filter cannot be applied onto a detaield object.
Is this a BI- BO Integration issue?? Kindly help me out with the same.
Regards
Akshay.

Hello Victor,
I have gone through the doc sent. It was helpful.
Info Object (BW)/ Dimension (BO): 0CUST_SALES__CUSTOMER.
In SAP BO the dimension has detailed object under it 0CUST_SALES__CUSTOMER- KEY and 0CUST_SALES__CUSTOMER- TEXT.
Now I can pass "0CUST_SALES__CUSTOMER- KEY" from the parent report. But in the child report we cannot apply Query level Prompt / Filter on the detailed object which will hold the parameter passed from the Parent report.
Q1: Can we apply prompts on a detailed objects?? Is there any configuration changes required.
Q2: Is there any other method the achive the same??
Regards
Akshay.

Error while Migrating the custom routines in Transformations

Dear All,
I am in the process of migrating BW 3.5 to BI 7.0.I migrated the Standard cubes and DSO's from BW3.5 to BI 7.0 flow successfully.
But while migrating the transformations which are having the custom routines,I am facing the below errors.
The data object "COMM_STRUCTURE" does not have a component called BIC/ZGROSSPRI".But the routine contains BIC/ZGROSSPRI.
I tried to change the BW 3.5 terminology to BI 7.0 terminology.(Like COMM_STRUCTURE replaced by SOURCE_FIELDS).But unable to solve.There are nearly 20 custome routines written in all transformations.
Can any one guide me who faced the same tyepe of problem?
Thanks & Regards,
Dinakar

HI,
We need to include Source and Target see the below article.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
How to Correct Routines in Transformations
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20correct%20routines%20in%20transformations.pdf
Thanks
Reddy

How to fetch the customer debit balances form the KNC1 database table

Hi Experts,
I am creating a ABAP report which would dispaly the customer credit balances for the currenct fiscal year.
I am fetching the values form KNC1 database table.....But in this table values are stored year wise.
But I want to display for the current fiscal year that means if teh user selects the 07/2011 as the month on the sleection screen then the debit balances from 072010 to 062011 should be dispalyed.
Could anyone please help me out to fetch this the debit balaces form KNC1 database table in the above format.
Or is there any other way to solve this problem?
Awating your urgent reply.
Many Thanks,
Komal.

Hi Komal,
First, you have to compute the initial period and the final period.
Next, you must read table KNC1 for the years comprised between these two periods.
Last, you must read the fields of table KNC1. For that, you should compose dynamically the name of the field, and then ASSIGN it to a FIELD-SYMBOL.
Now, just add up the values!
Please try the following code:
FIELD-SYMBOLS: <fs>.
DATA: t_knc1 TYPE TABLE OF knc1 WITH HEADER LINE.
DATA: d_debits LIKE knc1-um01s.
PARAMETERS: p_kunnr LIKE knc1-kunnr,
            p_bukrs LIKE knc1-bukrs,
            p_spmon TYPE spmon.
DATA: l_fieldname(20) TYPE c.
DATA: l_date LIKE sy-datum,
      l_date_from LIKE sy-datum,
      l_date_to LIKE sy-datum.
DATA: l_period(2) TYPE n.
DATA: l_num_times TYPE i.
START-OF-SELECTION.
"Compute the initial and final periods
CONCATENATE p_spmon '01' INTO l_date.
CALL FUNCTION 'RE_ADD_MONTH_TO_DATE'
    EXPORTING
      months = '-1'
      olddate = l_date
    IMPORTING
      newdate = l_date_to.
CALL FUNCTION 'RE_ADD_MONTH_TO_DATE'
    EXPORTING
      months = '-12'
      olddate = l_date
    IMPORTING
      newdate = l_date_from.
"Read table KNC1
SELECT *
    INTO CORRESPONDING FIELDS OF TABLE t_knc1
    FROM knc1
    WHERE kunnr = p_kunnr
      AND bukrs = p_bukrs
      AND gjahr BETWEEN l_date_from(4) AND l_date_to(4).
"this will yield at most 2 records, one for present year, and another one for the previous year.
"but if you select i.e. period '01.2012', initial_date = '01.01.2011' and final_date = '31.12.2011'
" --> thus only one year --> one record
CLEAR: d_debits.
LOOP AT t_knc1.
" If there's no year change
    IF l_date_from(4) = l_date_to(4).
      DO 16 TIMES.
        l_period = sy-index.
        CONCATENATE 'UM'      "compute dynamically the field name
                    l_period
                    'S'
          INTO l_fieldname.
        ASSIGN COMPONENT l_fieldname OF STRUCTURE t_knc1 TO <fs>.   "assign
        ADD <fs> TO d_debits.                  "and add up
      ENDDO.
    ELSE.
" If there IS a year change
      IF t_knc1-gjahr = l_date_from+0(4).
        l_num_times = 16 - l_date_from+4(2) + 1.    "you must loop 16 - initial_period + 1 times for the first year
        DO l_num_times TIMES.
          l_period = sy-index + l_date_from+4(2) - 1.
          CONCATENATE 'UM'                "compute dynamically the field name
                      l_period
                      'S'
            INTO l_fieldname.
          ASSIGN COMPONENT l_fieldname OF STRUCTURE t_knc1 TO <fs>.    "assign
          ADD <fs> TO d_debits.              "and add up
        ENDDO.
      ELSE.
        l_num_times = l_date_to+4(2).            "you must loop final_period times for the second year
        DO l_num_times TIMES.
          l_period = sy-index.
          CONCATENATE 'UM'               "compute dynamically the field name
                      l_period
                      'S'
            INTO l_fieldname.
          ASSIGN COMPONENT l_fieldname OF STRUCTURE t_knc1 TO <fs>.     "assign
          ADD <fs> TO d_debits.        "and add up
        ENDDO.
      ENDIF.
    ENDIF.
ENDLOOP.
You'll have the result on variable 'd_debits'.
I hope this helps. Kind regards,
Alvaro

How to display the Customer Name in the Sales invoice form

Hi All!
May I know the table from which I select the customer name for a certain customer number?
Thanks in advance!

Hi,
Kna1 is the customer master table there you can find the name1 filed
Thanks,
NN.

OTA_DELEGATE_BOOKINGS which column holds the customer's id

Similar Messages

Maybe you are looking for