OUTBINDING Error

Hello everyone,
I have a IDOC to ABAP proxy scenario in place.
While running the scenario i am getting the following error in sxmb_moni.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = 678B590E7A6EEB409CEEA4871C8FB4B4) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Guys please suggest how to solve the problem.
Thanks and Regards
Rahul Nawale

Hi Rahul,
It's a strange error...
According to OSS note 700004, it's maybe a problem with your License.
According to OSS note 502422:
If this error occurs, you can find more information on the error type in the developer trace of the relevant work process.
You have other OSS note by searching "SECSTORE 021".
I hope thus help you.
Mickael

Similar Messages

Idoc partner type LI to File Scenario.

Hello Experts .
I have the following scenario.
IDOC partner type LI to xml (file).
So we are not atlking about logical system here and we may have to use parties.
But I am not sure as to how to go about this approach.
For now we have Idoc coming into XI but failing after that .(Outbinding) error in reciver agreement (not to be confused with a cache issue .).
But I understand it is because of the parties not defined properly.
So I have defined a party and assigned my ECC system to the same.File was basically a service.Do I need to define another party for it or several other identifier
Tried to follow How Tou2026
Sample IDoc-XI
Scenarios document but it is to confusing.
Kindly help

Thanks for your reply.
Well I have already tried this approach.
That is
Created a party :Sender_party.
Identifiers :
<sapid><client> :*ALE#LI* :<venderno> actually ALE#LI #LF "otherwise I end up with party service not found.
Receiver determination:
sender party
<BS/service> i.e. <sapid><client> to mail_service (for testing to see if I recieve a payload)
<interface>
<urn>
Interafce determination
sender party
<BS/service> i.e. <sapid><client> amd <interface> interface mapping
<urn>
Reciever agreement.
mail_service : reciever mail adapter.
Error recieved.

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-DMGCLNT400</SAP:P1>
<SAP:P2>Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -DMGCLNT400 to receiver Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Kindly note nothing is wrong with cache .
It is strange DMGCLNT400 is already assigned to the party . .

IDoc - XI - Web Service configuration

Hallo
This is the problem we are facing :
We get an IDoc as Inbound, do some mapping and then send it to a WebService. The problem is that when we do so, we get a series of errors. Apparently the problem is that when the web service receives our messages it replies with a (simple) message as well. The point is that as far as I know IDocs cannot be configured for synchronous mode, (and when we tried it we failed) so we have nothing to do with the incoming message.
these are the messages from the Integration Monitoring/Message Monitoring
Error Category OUTBINDING
Error Code CO_TXT_ROUTING_BACK_ERROR
We don't have access to the Receiver System and the WSDL file is sent by them

Actually, I don't know. I will look arround it and try your previous suggestions too.
Just a not-so-XI question.
I tried to test the Web-Service using XML-SPY and the WSDL that they have provided for us. When I do so, i get an error 504, "HTTP error:could not POST file 'soap/CreateOrder' on server 'xx.xx.xx.xx' , where http://xx.xx.xx.xx:80/soap/CreateOrder is the URL that we are using during the configuration of XI. Would this imply that the error is that we just have wrong URL (but how since it is retrieve from the WSDL itself?).

Problem in business service

hai,
i have created a simple idoc to file application.
i have got a problem in technical routing and the error category is "outbinding", error ID id "CO_TXT_OUTBINDING_NOT_FOUND"
the sender service is not one which i 've created. it is displaying the previous sender service for my idoc.
how to delete the previous business service?
hope i have stated my problem clearly.
please help me

Hi Ramya,
For removing ur bussiness service from ur scenario just "Right click on ur bussiness service->and select
option remove from the scenario".
And now add ur respective Bservice by right clicking on it->Add to scenario.
Remaining steps as usual.
For this problem "CO_TXT_OUTBINDING_NOT_FOUND":
check weather receiver determination and interface determination objects are referenced to the same namespace or not. Sender and receiver interface objects should always refer to the same Namespace.
Check determination and interface determination objects are active in change lists tab. If they are not active, activate the objects.
And also:
1.Check out the Receiver Determination and Receiver Agreement . try to reactivate again.
2.check out the sender service, sender message interface, receiver service and receiver message interface in the SXMB_MONI
3.refresh the cache in SXI_CACHE and also integration builder>Administration>Cache Overview do the cache refresh for all IR, ID, and Runtime
Go thru this blog:
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Regards,
Vinod.

Error wile Outbinding of the message in multi mapping

HI
I have a scenario SIEBEL->XI->R/3
the data from siebel system is send through web services
in xi this data is mapped into 2 IDOCS using multi mapping .
I tested the scenario and i am getting the following error .
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi-message format can only be sent to one Adapter Engine</SAP:Stack>

Can some one help with this issue
Thanks
Nikhil

Nikhil,
For IDOC bundling, take a look at this blog and note no : 814393.
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Regards,
Bhavesh

Error: OUTBINDING CO_TXT_MMF_ENGINETYPE

Hello,
I try to create in XI mapping from one file to two idocs of different type. During tests I'm getting error in SXMB_MONI:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi message format can be sent to one adapter engine only</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I read about changing occurence of idocs from 1 to N but I think it would help only when I would have to create many idocs of the same type. Is it possible to run my scenario without using BPM? Both Idocs are sent to the same receiver.
I will be grateful for any advices.
Best Regards,
Agnieszka

Hi Look at the thread same error CO_TXT_MMF_ENGINETYPE is discussed here
Re: Multi message to Proxy ABAP without BPM possible?
Regards
Abhishek

Outbinding - CO_TXT_CHANNEL_PASSWORD_ERROR

Hi
I am doing file to proxy scenario. When sending a message the RWB shows the following Outbinding - CO_TXT_CHANNEL_PASSWORD_ERROR
The SXMB_Moni shows the error as
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = B13EC43C3560104F849AF8C5B02F964A) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Please help in solving the issue.
Regards
Farhat

HI Farhat
Check with the password for users - PIAFUSER
Check with Visual admin log as well to identify the correct cause of this.
Check with the RFC destination as well which you created for Proxy. But if the user is having authentication issue we usually get a 401 code.
Thanks
Gaurav
Edited by: Gaurav Bhargava on Dec 16, 2008 4:45 AM

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Error occurred during back-routing

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code><SAP:P1>,FileNET_BS</SAP:P1><SAP:P2>,R3D_301,,</SAP:P2><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Error occurred during back-routing
Error in communication channel
</SAP:Stack></SAP:Error>

is this an IDoc scenario with acknowledgments configured?
refer SAP Note 832965 and also make sure your configuration is correct.
ref: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb

Error sending data to an SCMTM system from an R3 system

Dear Friends
I am trying to send an Idoc from R3 system to an SCMTM system.
I have imported the idoc, message mapping is preconfigured from SAP and requisite configurations in ID have been completed.
I am getting this error in sxmb_moni when I use FTP adapter to post the data to SCMTM system:(it is showing as processed successfully)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>,BS_TM7_100</SAP:P1>
<SAP:P2>,BS_ECV_350,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver agreement found for sender ,BS_TM7_100 to receiver ,BS_ECV_350,,</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I tried to do this with Idoc receiver adapter but it was giving this following error in Call adapter:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>ShipmentRequestRequest_In</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to interpret IDoc interface ShipmentRequestRequest_In</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Do we have to use some other way of sending data to SCMTM system?or what should we use?
Do we have to suppress any acknowledgements in IDXNOALE,then please give me the steps for it
Please help.
Thank You
Warm Regards
Arjun Ghose
Edited by: Arjun Ghose on Apr 7, 2009 10:48 AM

Hi Rajesh
Found the problem in Receiver agreement/Operation Mapping /Message Mapping after running the test:
Operation Mapping
DESADVDELVRY03_2_ShipmentRequestRequest
Runtime error
Runtime exception occurred during application mapping com/sap/xi/tf/_DESADVDELVRY03_to_ShipmentRequestR~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Parsing an empty source. Root element expected!
... (136 lines)
In message mapping I tested, but it gave no error.In Operation Mapping there was error:
18:19:04 Start of test
RuntimeException during appliction Java mapping com/sap/xi/tf/_DESADVDELVRY03_to_ShipmentRequestRequest_
com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:ShipmentRequestRequest. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:366) at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:496) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626) at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:92) at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60) at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:87) at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:54) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:139) at com.sap.aii.ibrep.server.mapping.exec.ExecuteIfMapCommand.execute(ExecuteIfMapCommand.java:33) at com.sap.aii.ib.server.mapping.exec.CommandManager.execute(CommandManager.java:43) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:40) at com.sap.aii.ibrep.server.mapping.MapServiceBean.execute(MapServiceBean.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1579_10000.execute(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351) at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62) at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37) at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53) at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
18:19:05 End of test
I could not make out where is the problem .Please help.

Error CO_TXT_OUTBINDING_ERROR in SXMB_MONI

Hi,
I am doing file to idoc scenario and getting following error while posting the idoc in ECC.
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>.
I have checked my configuration in ID and everything is working fine.
Helpful answer will be rewarded by points.

Hi,
This is bit funny error.
Just go to receiver determination and refresh the condition you gave there. Open the condition editor and just refresh all the fields, specially which has no value mentioned in condition.
It will be solved.
Kulwinder

IDOC to File --- Error occurred during back-routing Error in communication

Hi All,
I am doing a IDOC to File (File Content Conversion) Scenario in which I have mentioned the field separator and end separator.. When i trigger the IDOC, i am only getting the first field value in the output. I am getting the following error
"- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
<SAP:P1>,IHS_BS</SAP:P1>
<SAP:P2>,com_IHS_B07_BS,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>"
My port and receiver are mentioned in "IDXNOALE" so that I can ignore the Acknowledgments. Please help as the error still persists..
Thanks
Anju

Try this thread:
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5

Error : CO_TXT_MMF_ENGINETYPE

Hi,
Iam getting the Below given error when iam trying to post the data into sap Using an IDOC Adapter.
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi-message format can only be sent to one Adapter Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Kindly let me know what could be the possible reason for this error.
Thanks,
Kittu.

Kittu,
You are trying to do Multi Mapping with a receiver IDOC adapter.
Unfortunately, multimapping workds only with adapters of the Adapter Engine and so, it will notwork with IDOC and HTTP adapters.
Regards,
Bhavesh

Routing error for HTTP to JDBC scenarion

Getting following error: please advise.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-BS_POC_TEMP_Sender</SAP:P1>
<SAP:P2>-POC_DB_Temp_Receiver_Channel,http://xys.com/xi/projects/syn/n1.IM_POC_TEMP_DB</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -BS_POC_TEMP_Sender to receiver -POC_DB_Temp_Receiver_Channel,http://xys.com/xi/projects/syn/n1.IM_POC_TEMP_DB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hey
Check the URL you have provided the sender system for HTTP.then check if you have configured receiver agreement/receiver determination for that combination of sender and receiver
The messages which is coming in sxmb_moni is unable to find any receiver side configuration for the sender attributes( like sender party/service or sender interface name).
Thanx
Aamir

OUTBINDING Error

Similar Messages

Maybe you are looking for