Outbound IDoc ORDRSP to XI

Hi Friends,
At present outbound IDoc ORDRSP is used in Customer EDI feed.
Based on my requirement I have to route this outbound IDoc ORDRSP to XI based on the Plant XYZ1.
Any customizing need to be done or Customer Functions need to be changed. Please guide me to know how to do this.
Thanks in advance.
Regards
Suresh

Done by customizing

Similar Messages

SENDING WBS ELEMENT IN OUTBOUND IDOC ORDRSP

Hi Experts,
i need to update idoc ORDRSP (to distribute Sales order) with field WBS ELEMENT , you can find this under item tab "Account assignment" field COBL-PS_POSID
I generated outbound idoc on several sales orders but none of them has this information.
do you know how to have this information populated in this idoc ?
Thanks and regards

Hi,
You need to do the following steps to create a custom segment and populate values into that:-
1. Create a custom segment using the T Code WE31
2. Add the created custom segment to the orders05 basic type by creating a new extension using WE30 transaction
3. Maintain a new entry in WE82 transaction for the message type, basic type and extension
4. Update the extension in all the necessary partner profiles WE20
5. You have lot of function exits in the function module IDOC_OUTPUT_ORDRSP, you can see them as customer function in that function module. You need to write the code in that include
6. Create a project for the function exit and activate the project.
Once you do all the above 6 steps then you can see values populated into the custom segment.
Thansk,
Mahesh.

Message type for Scheduling Agreement - Outbound IDoc

Hi All,
I have to create an Idoc for Scheduling Agreement through a Z program based on some conditions. I have bit confusion, whether i can use Idoc type for Orders(e.g ORDERS01..05) & Message type ORDERS / ORDCHG to generate Outbound Idoc.
Already there is process code for for ORDCHG mappig IDOC_OUTPUT_ORDCHG & ORDERS mappig IDOC_OUTPUT_ORDERS. Whether there will be any impact on this.
Appreciate your help.
Regards,
Anbalagan.

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Message type :FIDCC2/ IDOCFIDCCP02 - Triggering outbound IDOC

I have to send the FI accounting document of certain customer groups to the third party system .
Can anyone pls let me know how to trigger the outbound IDOC for the message type FIDCC2 after the FI document is created.
I have configured BD64 but can not find which program to trigger to generate the outbound IDOC with the FI data.
Thanks,
Prashanth

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Outbound idoc for RFQ

Hi,
can you tell me Outbound idoc for RFQ, Inbound idoc for Quotation and PO

P786809 wrote:>
> Hi,
> can you tell me Outbound idoc for RFQ, Inbound idoc for Quotation and PO
Hi,
This is the idoc type..
ORD_ID01 - Req.for quot./quotation/purchaseorder/order change
Message Type for               IDOCTYP
QUOTES -ORD_ID01
REQOTE -ORD_ID01
REQOTE is the outbound idoc will trigger for RFQ
QUOTES and REQOTE will trigger for Inbound idoc for RFQ
ORDCHG,ORDERS,ORDRSP,PORDCR will trigger for PO inbound and Outbound idoc
Regards,
Prabhudas

Outbound IDOC for sales order: message type, function module ?

Hi all,
is there a possibility to send out sales order data with an outbound IDOC (like sending an purchase order out with ORDERS.ORDERS05)
I've looked in WE20, for application V1 there are process codes like SD01, SD04, ... but the function modules behind are no existing on our system (release 500)
can anybody give me an little hint?
Thank you very much
best regards Hans

Hi George,
for every process code there is a function module attached you can see in WE41(t-code)..
double click on the Process code you will able to see the Function Module attached to Process code..
and also you can check it out in WE57 (t-code) link between the Function module and Message type and Idoc type..
Process code      SD01
Description       ORDRSP: Order acknowledgment, ORD_ID01 (SD_ORDRSP)
Function module   SD_EDI_ORDRSP_ORD_ID01
Process code      SD04
Description       DESADV: Shipping notif. with DES_ID01 (SD_DESADV)
Function module   SD_EDI_DESADV_DES_ID01
regards,
Prabhudas

Sales Order Outbound IDOC - Restricting Items being created with a Segment

Hi,
I have a requirement to restrict segments being created for Items (Child) in Sales Order Outbound IDOC based on conditions in the Items (Parent & Child). Can you please suggest me a suitable solution?
Basic Type: ORDERS05, Message Type: ORDRSP. What is the IDOC Function Module to be used to create Outbound IDOC for Sales Order?
Appreciate Your Help.
Thanks,
Kannan
Edited by: Kannan SA on Jan 3, 2008 3:03 PM

Hi,
if the segments are mandatory then you can't trigger the idoc without those segments.
Otherwise, you can read the segment and clear all the data in it, the segment will not be attached to the outbound idoc.
Where to do it? Search the CALL CUSTOMER-FUNCTION '002' for the outbound idoc for example IDOC_OUTPUT_INVOICE for Invocing.
Regards,
Baburaj

Outbound IDOC process - Using standard or Custom Program

Hi all,
i'm having some doubts regarding IDOC's outbound processing.
I'm trying to understand 2 scenarios:
1- Trigger Standard Outbound IDOC without writting any Z program ou IDOC FM.
It's possible to trigger a outbound idoc for exemple, whenever a sales order is created. To do this is, i suposed i don't need to write any code at all, correct?
What i need to do is create a logical system (SALE), define Transmission protocol (WE20, in here i associate the partner, and the outbound message type? After this point is the idoc automatic triggered?
If not, what is the correct procedure?
2 Trigger Ountbound IDOC using Z program.
Whats is diferent from the point 1 to this situation?
Best regards,
Pedro

Kali,
1. You can search in SE37 using IDOC_OUTPUT* for finding out corresponding function modules. It is based on message types.
2. You can search user exit in above mentioned function module. So first get the correct populating FM & then you can search for Call Customer Function inside the code for user exit.
3.Again ans is same as in point 1.

Is it possible to generate outbound idocs for FI invoices? How?

Is it possible to generate Outbound idocs for FI invoices? How? or else i have to write program to get data in file and pass it to translator. Please help.

Dear Gabriel
Before letting you know the possibility, can you please let me know why you want such a requirement, since standard has not provided such copy control, to my knowledge.
As you would know order type KB is for consignment fillup where you are just transferring the goods from FG unrestricted to your own warehouse and that is why in standard you can see the copy control KB --> F8 which means you can raise proforma against delivery and not against fillup order.
So think of whether really you wanted to raise proforma against fillup order which is NOT recommended by SAP. However, still if you feel that the requirement is so to have, you can make the settings in VTFA.
thanks
G. Lakshmipathi

Function Module to Generate Outbound IDOC for Sales Documents

Hello Experts,
Can someone please help me, I need to know which function module to use in order to generate the outbound IDOC for sales documents. Some of the fm's I have come across are the following:
IDOC_OUTPUT_ORDERS, but actually for Purchase Orders
IDOC_OUTPUT_ORDRSP, but did not generate any IDocs for my sample Sales Order.
Points will be given for any help provided.
Thanks in advance.

Hi Nagaraj,
I tried using the IDOC_OUTPUT_ORDERS but I keep getting an error that the Purchase Order <xxx> does not exist, even though the document I tried is a sales order. For everyone's reference here is the code:
form process_data.
DATA v_idoc       TYPE edidc-docnum.
DATA i_edidd      TYPE TABLE OF edidd.
DATA wa_idoc_ctrl TYPE edidc.
LOOP AT i_nast INTO wa_nast.
    CLEAR i_msgs[].
    CALL FUNCTION 'WFMC_PROTOCOL_GET'
      EXPORTING
        cps_nast        = wa_nast
      tables
        messages        = i_msgs
     EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2.
    LOOP AT i_msgs INTO wa_msgs WHERE arbgb EQ 'E0'.
*--- Check first if there is an IDOC
      IF wa_msgs-msgv1 IS INITIAL.
        CONTINUE.
      ENDIF.
      v_idoc = wa_msgs-msgv1.
      CLEAR i_edidd[].
      CLEAR wa_idoc_ctrl.
      CALL FUNCTION 'IDOC_READ_COMPLETELY'
        EXPORTING
          document_number                = v_idoc
        IMPORTING
          IDOC_CONTROL                   = wa_idoc_ctrl
*         NUMBER_OF_DATA_RECORDS         =
*         NUMBER_OF_STATUS_RECORDS       =
        TABLES
*         INT_EDIDS                      =
          INT_EDIDD                      = i_edidd
        EXCEPTIONS
*         DOCUMENT_NOT_EXIST             = 1
*         DOCUMENT_NUMBER_INVALID        = 2
          OTHERS                         = 3.
      CALL FUNCTION 'IDOC_OUTPUT_ORDERS'
        EXPORTING
          object                              = wa_nast
          control_record_in                   = wa_idoc_ctrl
*       IMPORTING
*         OBJECT_TYPE                         =
*         CONTROL_RECORD_OUT                  =
        tables
          int_edidd                           = i_edidd
*       EXCEPTIONS
*         ERROR_MESSAGE_RECEIVED              = 1
*         DATA_NOT_RELEVANT_FOR_SENDING       = 2
*         OTHERS                              = 3
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      COMMIT WORK.
    ENDLOOP.
ENDLOOP.

Automated error email notification when outbound IDOC fails

Hi,
The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
Please give your inputs or any other alternate solution to send mail through workflow when outbound IDOC fails.
Thanks in advance.

Hi,
I guess in your outbound partner profile for PAYEXT. you need to add process code EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

Outbound IDOC WPDTAX not getting generated

Hi
I am not able to generate outbound IDOC WPDTAX through WPMA transaction.
We are using TAXUSJ as the tax procedure.
Tax Condition type UTXJ and JR1 has been maintained in the system.
On looking at the code against WPMA ,
POS_TAX_GET is called to calculate taxes.
It does not have a fetch against all the condtion tables for tax.
The above condition has been maintained in table A053.While the above program fetches data against only A003.
Can somebody help?
Regards,
Amit.

Hi Amit,
For TAXUSJ, the conditions maintained are time dependent conditions.
However , IDoc type WPDTAX01 does not support time dependent conditions.
Only time independent conditions will be transferred with the help of Idoc type WPDTAX01.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/3f/81e33bfa5d11d38d1f080009d10d9a/frameset.htm
Regards,
Lisa

Error while creating an outbound idoc using idoc type delvry02

hi,
i getting the following error while creating an outbound idoc(outbound shipping notification) using message type " DESADV" and IDOC TYPE " DELVRY02"
ERROR:
" SPECIFY EITHER ADDRESS NO OR ADDRESS HANDLE"
MESSAGE NO: AM053
Help would be appreciated.
regards
leo

The message is kind of self-explanatory. It seems that some address (delivery address ?) is required but is missing from the IDoc. If it's a syntax error, then the segment with error will appear in red in WE05 transaction.
It is also possible that you have filled some field that you should have left blank and now SAP is trying to find an address based on that field.
Check your IDoc contents. It's really hard to tell from the distance since the requirements and configuration could be very different in different systems. Sometimes the OSS note search by message ID and number is also helpful.

Consuming an outbound iDoc from a Java Web Dynpro application on EP front

Hi,
I am trying to consume an outbound iDoc from a SAP system into a Java Web Dynpro application. The result would be displayed on the Enterprise Portal. Could anyone help me with the process to be followed for the same.
Regards,
Chandrima.

Hi,
I am trying to consume an outbound iDoc from a SAP system into a Java Web Dynpro application. The result would be displayed on the Enterprise Portal. Could anyone help me with the process to be followed for the same.
Regards,
Chandrima.

Creation of Inbound Idoc for the Outbound Idoc in same client

Hi,
My requirement:
Whenver an PO is created an Outbound IDOC is generated in system ABC with client 100.I want to pass this IDOC data to create an Inbound Idoc for Sales Order(SO) in the same client.
It would be helpful if anyone can answer on how to Transfer the Outbound Idoc after it crosses the port.
I found there is a field for function module in WE21,can this be used to get the requirement done.
Please suggest.
Regards,
Amar

Example of a program that create and post an inbound idoc....maybe that will help you:
report zzinbound_idoc.
data: g_idoc_control_record like edi_dc40 occurs 0 with header line.
data: g_edidd like edi_dd40 occurs 0 with header line.
data: g_e1bpache09 like e1bpache09.
parameter: mode type c default 'A'.
refresh: g_idoc_control_record, g_edidd.
clear:   g_idoc_control_record, g_edidd.
*-Build Control Record -*
g_idoc_control_record-mestyp = 'ACC_DOCUMENT'.   "Message type
g_idoc_control_record-idoctyp = 'ACC_DOCUMENT03'. "IDOC type
g_idoc_control_record-direct = '2'.              "Direction
* Receiver
case sy-sysid.
when 'DE2'.
    g_idoc_control_record-rcvpor = 'SAPDE2'.     "Port
    g_idoc_control_record-rcvprn = 'IDOCLEGACY'. "Partner number
endcase.
g_idoc_control_record-rcvprt = 'LS'.             "Partner type
g_idoc_control_record-rcvpfc = ''.               "Partner function
* Sender
g_idoc_control_record-sndpor = 'A000000002'.      "tRFC Port
case sy-sysid.
when 'DE2'.
    g_idoc_control_record-sndprn = 'IDOCLEGACY'. "Partner number
endcase.
g_idoc_control_record-sndprt = 'LS'.             "Partner type
g_idoc_control_record-sndpfc = ''.               "Partner function
g_idoc_control_record-refmes = 'Customer clearing'.
append g_idoc_control_record.
*-Build Idoc Segments -*
*---E1KOMG
clear g_edidd.
clear g_e1bpache09.
g_edidd-segnam               = 'E1BPACHE09'.
g_edidd-segnum               = 1.
move g_e1bpache09 to g_edidd-sdata.
append g_edidd.
*-Create idoc -*
*-Syncronous
if mode = 'S'.
call function 'IDOC_INBOUND_SINGLE'
    exporting
      pi_idoc_control_rec_40              = g_idoc_control_record
*     PI_DO_COMMIT                        = 'X'
*   IMPORTING
*     PE_IDOC_NUMBER                      =
*     PE_ERROR_PRIOR_TO_APPLICATION       =
    tables
      pt_idoc_data_records_40             = g_edidd
    exceptions
      idoc_not_saved                      = 1
      others                              = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*-Asynchronus
else.
call function 'IDOC_INBOUND_ASYNCHRONOUS'
    in background task as separate unit
    tables
      idoc_control_rec_40 = g_idoc_control_record
      idoc_data_rec_40    = g_edidd.
commit work.
endif.
write: / 'Well done!'.

Outbound IDoc ORDRSP to XI

Similar Messages

Maybe you are looking for