Outbound Proxy messages in SXI_MONITOR of R/3 system in status "Scheduled"

Hi guys,
I have the following issue:
In a Proxy-to-File Scenario, we are trying to send some data from R/3, but they never reach XI because they remain in sender R/3 system, transaction SXI_MONITOR with status "Scheduled", with a green flag. I cannot see them in SM58 neither.
Do you have any idea ?
Best Regards,
Evaggelos Gkatzios

Hi Evaggelos,
I have face same issue.But i had resolved it.This issue is related to Queues.Your objects are struct in queues.Please do the following steps.
1)Go to SXMB_ADM
2)Select Manage queues->register queues->Activate queues
Note:Before u r register the queues,delete the queue objects in SMQ2 otherwise it will gives error
3) Refresh the Cache objects SXI_CACHE
http://<hostname>:<port>/CPACache/refresh?mode=full
http://<hostname>:<port>/CPACache/refresh?mode=delta
Thanks
Ravi

Similar Messages

Outbound Proxy message missing in PI

Hi ALL,
i created a OutBound Asyn service interface and i created a Proxy for the same .now when i Run it .the XML i am able to see in the SXMB_MONI of the sender ECC system ,but i am not able to see the same the message in the SXMB_MONI of the PI system,
do i need to create End setting like RFC or Prots .from Ecc to PI ystrem .or anything else for receiving the message in the PI system.. from Ecc system.. ?
thanks
Souz

Dominic , your issue seems to be that message is not getting stored in ECC right since the message is in SXMB_MONI of PI, in that case check with your BASIS team on the config. in SXMB_ADM in ECC
Regards,
Senthil Nattamai Sekar

Outbound Proxy - Message Recorded(Commit Missing)

Dear All,
The proxy's are configured correctly, and when tested the message getting created with status as Message Recorded(Commit Missing).
SLDCHECK transcation is also sucessfull!
No application Log exist at transaction SLG1!
What could be the reason for message not processed further?
Thanks & Regards,
Jilan Bhasha

Do the messages in ur ECC sxmb_moni show a green flag...oif so it a simple commit use..
Write this code at the end of your Proxy call -
Commit work.
regards,
arvind R

SRM XI standard content ...SRM Server 7.0 - Outbound proxy not working

Hello All,
we have integrated SRM SUS with ECC 6.0 using XI standard content XI SRMSERVER IC 7.0. With same configuration, Purchase Order has been send from ECC to SUS and PO is created successfully in SRM SUS. But, while confirming the purchase order, its not generating outbound proxy message.
And when we check the interface PurchaseOrderConfirmation_Out(i.e dobule clicking) in SPROXY transaction of SRM SUS, getting the following LOG:
1. Logical port template is inconsistent, regenerate it and activate it
2. cannot create LPT without DT profiles
3. Regernate proxy(inactive version incorrect)
Let me know if you have any suggestions.
Regards,
Sreenivas.

Hello Srinivas,
1.Check your Port creation from ECC to XI 2 SRM.
2. Activate your proxies properly and check whethar your proxy communication working properly or not.
check this links for your reference.
MM -XI-SUS
MM System - XI - SUS
MM-XI
How to integrate MM using XI
SRM-XI
SRM and XI Integration
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
SRM and XI
Is there pre-configured message mapping for SRM Content?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
SRM XI scenario
Which version of SRM needs XI?
SRM AND SAP XI
XI with SRM 4.0
Regards,
Mahesh

ABAP Outbound Proxy: some messages stuck in CRM system

Hi all,
we've a strange issue with a ABAP Outbound proxy we've generated in our CRM 5.0 system (asynchronous interface).
Sometimes messages stuck in the CRM system. They are in status 'Scheduled' (green flag) in SXMB_MONI in the CRM system. When I have a look at the corresponding queue, there's no message within. Status in SMQ1 and SMQ2 is fine, too. All queues are registered. When I reprocess such a message manually in SXMB_MONI in CRM with the restart button, they're sent fine to XI.
Please note: it's NOT a general issue with that outbound proxy. In most cases the messages are sent immediately, just in some cases the messages stuck and I don't know why.
Is it possible to restart such messages automatically? I just know the report RSXMB_RESTART_MESSAGES, but that one just restarts messages in Error status. But the ones we have aren't in error status so they cannot be selected with that report.
Any idea where could be the problem / we should check?
BR
Holger

On which SP r u working correctly. May be an SP upgrade could help.
Regards,
Prateek

Outbound Proxy - No XML message seen !!!!!!!!!!

Hi All
I am trying to use outbound ABAP proxy from an R/3 system . I have written a Z program to triger the execute_asynchronous method of the proxy generated. Now when i go to see the SXMB_MONI txn to see any XML message flow i dont see anything .
Any pointers so to what need to be perfect to see a XML message is the monitor for an outbound proxy??
Thanks in advance for your help
rohan

Hi,
Generally the message goes in the schedule mode when the target system is not available or the connection to target system is broken. Pl check the target system.
You can use this weblog as checklist.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Thanks,
Prateek
Message was edited by: Prateek Shah

Can we edit SOAP Header for an Outbound ABAP Proxy message?

Hi,
Can we add some information such as dynamic configuration to the SOAP header for the outbound ABAP Proxy from ABAP report in SAP Application System?
Regards,
Praveen Gujjeti.

Hi Praveen, have you found soulution for this? Can you share it with me?
From here http://help.sap.com/saphelp_nw70/helpdata/EN/d6/49543b1e49bc1fe10000000a114084/content.htm
The help described that:
Set logging in the message header. This means that this message is logged even if logging is deactivated explicitly in the configuration. The logging information is part of the message header:
¡ <SAP:Logging>1</SAP:Logging>
Activates logging explicitly.
¡ <SAP:Logging>0</SAP:Logging>
Deactivates logging explicitly.
So it means that we can edit SOAP header for outbound ABAP proxy. But i haven't find the correct method to do that.

Outbound Proxy is generating Mapping Transformation XSLT error in SPROXY Test

Hi,
I have searched already online but i am unable to find anything relevant.
The scenario is that I have an Inbound proxy for processing the incoming payload and in this code the call is made to the oubound proxy method and i am gettin the MAPPING.TRANSFORMER_EXCEPTION Exception occurred during XSLT mapping of the application
CALL METHOD outbound_obj->shipment_status_notification_o
EXPORTING
output = wa_orders_request_out
IMPORTING
input = wa_orders_response_out.
We just updated the orders_request_out with a single field and activated and regnerated the proxy in ECC and i can now see the updated structure.
However, if i take the payload from production and just pass the payload in debug to the above method call in both Dev and QA with the added field, I am getting the above error.
I cannot do the proxy debug in production unfortunately so i cannot see if this is happening only in Dev and QA.
Can anyone please help me as this is urgent and If i can get past this error i can actually test if processing is working as expected?
Regards,
Archana

Hi Mark,
I have checked the data type and the field occurrence is 0.1
The change was made only to the request structure as based on this field value some selection needs to be made. The Response structure was not changed at all.
I have regenerated the outbound proxy as well and surprisingly even though it was not modified it still did not give me a message that the proxy object has not changed. I had to activate it as changed to inactive.
I am also not sure why that happened.
Regards,
Archana

Outbound Proxy - XI - File scenario. Outbnd proxy not callin XI.

Hi All,
I have a requirement where I have to develop a Outbound Asynch Proxy-> XI -> File scenario.
For this I have crated an Outbound Asynch proxy and called this proxy from a report in ABAP.
When I execute the report, i am unable to see the message in XI Moni.
But when I try to emulate the same scenario by passing a message from the RWB Test Page, the message is flowing to the file successfully.
It seems that the problem is just that the ABAP report is unable to call the XI by executing the outbound proxy method.
The code for the report is as below:
*& Report Z_ASYNCH_PROXY
REPORT Z_ASYNCH_PROXY.
data prxy type ref to ZFUJCO_SI_TEL_NUM_RFC_RESP_ASY.
data out type ZFUJMT_TEL_NUM.
out-MT_TEL_NUM-TEL_NUM = 'test_proxy'.
create object prxy .
TRY.
CALL METHOD prxy->si_tel_num_asych_in
EXPORTING
    output = out
commit work.
CATCH cx_ai_system_fault .
   DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
ENDTRY.
Please tel me how to find out that where the message is getting stuck and resove this.
regards,
Piyush

Hi All,
Thanks a lot for ur inputs.
i was able to resolve it.
The pointers are:
- The message was gettting stuck in the queues XBTS0009 of the Bus system. I chekced it in SXMB_MONI of bus syst.
- i activated the queues usung SXMB_ADM -> manage queues
- The HTTP destinatin was not maintained for the connectino to the PI Url. In fact the url was hardcoded in the sicf -> xi-> engine
I maintained this using
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1803326050DB10288658103888810737End?blog=/pub/wlg/3022
Thanks for all your help.
regards,
Piyush

SPROXY error testing outbound proxy interface

Hi,
I am trying to test an outbound proxy interface using SPROXY but am getting the following error:
Apart from the above messages there is no more help available. When I try testing the generated XSLT program using SXSLT_TEST it gives an error "No valid XSLT program supplied". I have checked and the auto generated XSLT program does exist.
Any help appreciated.
Thanks
Che

Hi Che Eky,
Check out below helpful thread & doc:
SERIALIZE_APPLICATION_DATA Conversion error ABAP => XML: Request Message
Serialization issue in abap proxy
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a89312f8-0b01-0010-86b3-fdd7178e0534?QuickLink=index&…
Regards,
Krupa

Outbound Proxy error when triggering from SPROXY

Hi Everyone,
I was working on outbound proxy from ECC to PI. I have generated the proxy and activated. When I am trying to test the proxy manually from SPROXY the message is not getting triggered to SXMB_MONI in ECC itself. But I didn't get any error message as well. When I am executing the proxy from SPROXY I was getting below message in the status bar. So can anyone help me with the possible solution why the message is not getting triggered.
Below is the options I have selected while executing the proxy.
This was the status message which was giving after execution of proxy from SPROXY. The same status was giving for all the Proxy interface which ever is executing from SPROXY.
Regards,
Kankipati.

Hi Kankipati
can you please try Commit work by navigating on test proxy screen .
Extra- Trigger Commit work .
Follow the below link .
SAP PI Reference: SAP PI ABAP Proxy Outbound settings, Triggering message to SAP PI(When many sap pi systems)
Best Regards
Srinivas

Sync Async using proxies ( Calling Outbound proxy from Inbound proxy )

I'm trying to generate Asynchronous Outbound message from the Synchronous Inbound message message due to a requirement. My question is : is it really possible to develop such a scenario?. I'm getting weird error such as Kernal exception etc. Please let me know if you have developed such scenario and what should we do dfifferently in such scenarios?. Thank you for any suggestions.

Hi,
This error has has nothing to do with Calling Outbound Proxy from from Inbound Proxy. The scenario which you are telling is very much possible.
It looks like there is some problem in your proxy code while calling RFC from within there or something like that. Try catching the exception and see what is the exact error or put in debug mode and see the step where exactly your code is failing.
Use the following links for Catching Exception in Proxy
Inbound ABAP Proxy Trace and error handling
Handling Exceptions
ABAP Server Proxies - Fault Handling
Exception handling in integration processes
ABAP Proxy and fault messages
/people/bhanu.thirumala/blog/2006/02/07/abap-proxy--xml-to-abap-transformation
Thanks
Amit
Reward point if answer is helpful

To Monitor inbound and outbound messages for ECC 6.0 business system

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Filtering proxy messages in XI

Hello ,
I have a proxy outbound scenario which is triggering data from ECC which is converted to flat file in XI.
The number of messages triggered in a single run of this interface is around 3000. And many times I am required to find message in XI with particular business content.
I dont know if there is any way of filtering proxy messages in XI as per content in payload.
Is there anyway of doing this?
Any help is greatly appreciated.
Thanks
Anand.

Hi,
you can filter this in Proxy logic it self or you can filter this in PI Mapping.
i suggest you to do in Proxy program.
Regards,
Raj

Outbound Service/Message interface in PI 7.1

Can anybody let me know the following please...
How should I go about "Creating an Outbound Service/Message interface in PI 7.1 " ? Or even check if there is an existing one already. ?
How to access ESR/IR ?
Thanks

Hi Tony,
Could you please explain a little more on your scenario.
Please refer the document for help Consume Enterprise Services in Java Using
SAP NetWeaver Developer Studio
[Consume Enterprise Services in Java Using SAP NetWeaver Developer Studio|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80d9fbfe-1e97-2c10-e9b3-ad9a10f1f6cb?quicklink=index&overridelayout=true]
Also you can find good links in this forum [post|Java Proxy & NWDS;
try if you get some clue to your problem after going through these documents.
Regards.
Srinivas
Helpful => Star

Outbound Proxy messages in SXI_MONITOR of R/3 system in status "Scheduled"

Similar Messages

Maybe you are looking for