Outlook 2013 Rules issue when more than 50 rules exist ("The rules on this computer do not match the rules on Microsoft Exchange").

I think I may have found a bug.
My Outlook 2013 profile has more than 75 rules. When I started testing Outlook 2013, I got the message "The rules on this computer do not match the rules on Microsoft Exchange. Only one set of rules can be kept. You will usually want to keep the rules
on the server. Which rules do you want to keep?"
I did the following troubleshooting:
1. I created a new Outlook profile. This didn't fix the issue.
2. I exported my rules, cleared them using "outlook /cleanrules", then reimported the rules. This didn't fix the issue.
3. I cleared the rules again (outlook /cleanrules), then hand-entered the rules. This also didn't fix the issue.
4. I reduced the number of rules to less than 50. This FIXED the problem.
5. When I entered rule #51, the problem came back. When I removed ruled #51, the problem was again fixed.
Does anyone know of a fix or workaround to this issue?
Thanks.

Sounds like you went over your "rule quota limit" as you do have a great number of rules.  Please see the link below for cause and possible resolution.
http://support.microsoft.com/kb/886616
Be kind and Mark as Answer if I helped.

Similar Messages

  • I am having the  problem . it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone. i have taken the sim card out and put it back in even then its of no use. if any one out there can help us it would be very nice

    i am having the  problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
    i have taken the sim card out and put it back in even then its of no use.
    if any one out there can help us it would be very nice of them. thank you for your time.

    I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
    Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
    Yes, my friend unlock the phone to use with Rogers but I don't know where

  • HT201412 I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    iOS: Unable to update or restore
    Read the article  Put it in recovery mode

  • Hello, I have try to install Snow Leopard but when I am checking the section"about this computer" is show me the same soft OS x 10.5.8. Is it that normal or it must appear a different soft there. Please also advice what to do, because I have tried twice.

    Hello, I have try to install Snow Leopard but when I checking the section"about this computer" is show me the same soft OS x 10.5.8. Is it that normal or it must appear a different soft there. Please also advice what to do, because I have tried twice.
    Thanks

    These places,
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    You need to buy 10.6.x DVD or flash drive (w/ Lion or Mountain Lion).
    Check Apple Store or call.

  • I purchased Lightroom from Amazon.  When I go to register, the license key from amazon does not match the fields in the software.  I am stuck.

    I need help registering Lightroom.  Purchased from Amazon.  The license key Amazon provided did not match the fields when activating the software.  Help!

    Maybe Amazon provided a redemption code not a license key:
    https://redeem.licenses.adobe.com/getserial

  • Syncing will change more than 5% of your calendars on this computer

    Hi all,
    I'm new to iPhone, but very familiar with Mac. When I attempt to sync my iPhone to my calendars in iTunes I get the message that syncing "will change more than 5% of the calendars on this computer."
    What's this mean?
    I always hit cancel because I don't want to lose any calendar info on my Mac.
    I'm attempting to sync 9 or 10 iCal calendars.
    I'm sure this has been well covered in these forums, but I'm able to find my answer.
    Thanks!

    What's this mean?
    Basically you have more or newer info on one side of the syncing devices.
    Click on Details when you get this message and you'll see the entries that differ on the phone based calendars. One solution could be to set up your calendar on your computer as desired and replace the calendar info on the phone during the next sync. Click the option in the info pane/ advanced section in itunes with your phone connected.

  • Issues when more than 100K images in library

    Hi,
    I've recently spent a lot of time importing several years worth of images into my Aperture Library. At the moment the library stands at approx 104K images. The images are arranged by date into projects - each project having *less than 10K images*. An example of the structure is:
    .Library (Built in smart albums).
    .Client Disks (Folder)
    .RAW Library (folder)
    .-2004 (year)(folder)
    .--01 Jan 2004 (Month)(folder)
    .---29 Jan 2004 (Day)(project)
    .---30 Jan 2004 (Day)(project)
    .--02 Feb 2004 (month)(folder)
    .-2007 (year)(folder)
    .--01 Jan 2007 (month)(folder)
    .---27 Jan 2007 (day)(project)
    etc
    The problem lies with Smart albums or doing any searching across the whole library
    Smart albums work fine when they're created at the year or month scope within a folder (eg '.Raw Library.2007' or '.Raw Library.2007.01 Jan 2007'), but fail when they are created at the top container scope of '.Raw Library' or at the default aperture 'library' level.
    When the smart albums fail, the message that is given is 'Too many images to display. Please create a smart album to show images in the browser'. This occurs even when the selection made should only amount to 100-200 images. Smart Galleries which also worked quite happily across the scope of the library before there where more than 100K images have also stopped working.
    This actually makes Aperture pretty useless as an image library management tool as I would have to create multiple smart galleries in each year to find results across the library and that sort of defeats the purpose of managing the images in Aperture
    FWIW, The Machine specs are: MacPro 3Ghz, 2Gb Ram, OS-X 10.4.9, Aperture V1.5.3, Software Update fully-up-to-date and the images are all referenced, not managed.
    I'd be interested if anyone else has come up against this issue!

    Glad I'm not the only one who has the problem.
    After a bit more playing it seems that the default smart albums do work, at least the 5*, * or better, Rejected and last week, last month work - the yearly ones don't. If you create a smart album and use the star ratings it works. But the moment you add another criteria in - such as a keyword - then it stops working again. If one filter can work with a global scope, then why shouldn't one that's got a keyword added...

  • Your Application Set does not match the applications in your Retrieval Rule

    Hi,
    While creating the time card iam getting the error:Your Application Set does not match the applications in your Retrieval Rule Group.
    Please Suggest the solution.
    Thanks

    In Our case, we created a new PERSON TYPE in HR and we forgot to add this type to OTL Preferences.
    So in the above scenario:
    Go to US OTL Application Developer -> Preferences ->
    In the Eligibility Tab. add new row
    Name of Rule => any unique name
    Name of Branch => enter the name of an existing branch which the time card preferences are going to be the same.
    Link By => We use Person Type... You can choose PERSON here but i would not know why you would want to do that
    Linked To => Person Type you want to have this for
    Precedence => Unique Number
    From => make sure to enter an earlier date especially when people are required to enter older than todays timecard since this field defaults to today.
    If you totally dont have or want to build a new preference, then you will have to go to the Preference Tab and create a new branch.
    in ours, we have Timekeeper and TimeStore and Employees
    in Timekeeper -> we have timekeeper timecard layout
    in TimeStore -> we have approval style, entry level processing rule, time entry rule groups, timestore retrieval rule group
    in Employees -> all we have is really those preferences we;d like to see. Date Format, Enter Negative Hours, Enter Override Approver, Number of Empty Rows, Timecard Delete Allowed, Timecard Layout, Number of Recent Timecards displayed, timecard status allowing edits.
    Hope the above helps

  • Getting the message "This computer is not authorized" when trying to sync iPhone.

    When I try to sync my iPhone I get the message that "Find my Friends" can't be copied from the iPhone because this computer is not authorized. When I go to authorize the computer I get the message that "This computer is already authorized". Anyone know how to resolve this issue?

    Well did you authorized the computer -

  • Profit Center Substitution Rules are exceeding More than 999 Rules

    Hi Experts,
         (Transaction Code GGB1) Profit Center Substitution Rule are exceeding More than 999 Rules. And there is a need of substitution rules to create.
    Please suggest me if any User Exists are available or alternative solutions through wich i can determine the profit center in sales order and same profit center can be transfer to FI as well as CO...
    Regards,
    Shivaji

    In the substitution you can use the option EXIT
    click on the help and go from  there:
    In table T80D you have to assign the exit name
    There are example ABAP's the standard one yopu have to replace in the table with a z version.
    Perhaps an other option is to de redesign from you substitutins, by using perhaps set's

  • Outlook 2013 signature issue

    Hello,
    I'd be very grateful if someone could help with the following query that I received from a colleague. This issue was raised after I asked all members of staff, to standardise their email signatures.
    "I followed your script for this: my image comes out bigger than yours?"
    My instructions (the script) was:
    Copy the attached .jpg image to your desktop
    Select ‘FILE’ from the main navigation
    Select ‘Options’ from the drop-down menu
    Select the options for ‘Mail’ in the left hand column
    Select ‘Signatures’ from the right hand column
    If you’ve not already set up a signature, select “New”, give the signature a name and select “OK”
    Having selected the name of the signature you want to edit, insert or update the text and image in the space provided.
    Format the text, along the lines of my signature block below, adding or removing any elements (fax no, direct line, DX address etc.) according to your individual preferences
    Set the defaults relating to when you’d like the signature to be used.
    Any guidance about why the image is coming out larger when sent from a different email account/PC would be very welcome.
    Many thanks,
    Richard 

    Hi,
    There is a setting in Outlook 2013 that may reduce the size of images, if you have ticked this option, the email that you send may display the image smaller than the one other people send.
    In Outlook 2013, click FILE -> Options -> Mail -> Message format -> Reduce message size by removing format information not necessary to display the message. Uncheck this option and click OK.
    Now send the email again to check the result.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Multiple select queries used in Excel BI report ,fetching data from Sharepoint DB(SP2010_Prod_ProjectServer) causing blockage on DB ,when more than one workbook(same copy of Excel BI Report) refreshed using Refresh All option.

    I am using mutiple select queries to fetch data from Project Server 2010 DB(its sharepoint DB) and these queries fetch data in Excel BI report by establishing connection with DB using instance name and all. I have enhance all these select queries and data
    is being fetched in secs. but when more than one copy of same Excel BI report is refreshed using 'Refresh All' option, then these select queries cause blockage on DB.
    Please let me know mitigation for this blockage issue.
    Should I use begin transaction and commit transaction statements/ shared lock statements.
    please reply

    Hi,
    run same query at the same time?

  • Wcf Data Service fails when more than 8properties  in the 'select=' portion

    Hi:
    I am using WCF Data Service and Oracle
    EF Provider is ODAC11.2 Release 4
    Wcf Data Service fails when more than 8 properties are specified in the 'select=' portion of the URI
    here is my code
    var q = from c in this.ctx.SALESORDER_ITEM
    select new
    c.SORDERDETAILID,
    c.IID,c.DMFLAG,c.OWNERID,c.SKUID,c.SKU_ID,c.TRADENO,c.SOURCEID,c.SORDERID
    excetion:
    InvalidOperationException: An error occurred for this query during batch execution. See the inner exception for details
    The inner exception is null, but the DataServiceClientException states: Value cannot be null Parameter name: value
    the exception is thrown in base.OnStartProcessingRequest(args) method (overridden).
    Here is the call stack as well:
    at System.Data.Services.WebUtil.CheckArgumentNull[T](T value, String parameterName)
    at System.Data.Services.Internal.ProjectedWrapper.set_PropertyNameList(String value)
    at lambda_method(Closure , Shaper )
    at System.Data.Common.Internal.Materialization.Coordinator`1.ReadNextElement(Shaper shaper)
    at System.Data.Common.Internal.Materialization.Shaper`1.SimpleEnumerator.MoveNext()
    at System.Data.Services.Internal.ProjectedWrapper.EnumeratorWrapper.MoveNext()
    at System.Data.Services.DataService`1.SerializeResponseBody(RequestDescription description, IDataService dataService)
    at System.Data.Services.DataService`1.HandleNonBatchRequest(RequestDescription description)
    at System.Data.Services.DataService`1.HandleRequest()
    Is there a max number of properties in $select statement
    I think may be it is oracle provider's problem ,but i don't konw how to debug it Can anyone help me
    Any help is greatly appreciated

    I believe the null/empty string issue is unrelated to the 8 column issue, at least for ODP.NET. For example, let's take the original query in the OBE:
    http://.../yoursvcfile.svc/EMPLOYEES?$select=EMPLOYEE_ID,FIRST_NAME,LAST_NAME,SALARY,DEPARTMENT_ID,DEPARTMENT,EMAIL,PHONE_NUMBER,MANAGER_ID
    Let's make all the columns selected not nullable. You can do this with the Oracle Dev Tools. Specifically, PHONE_NUMBER and FIRST_NAME are the only nullable fields. I make them non-nullable and re-run the query and the same error occurs. Thus, these values should never be made null. Moreover, in all 107 rows, none of these row values consist of empty strings anyway.
    Looking into the problem further, WCF DS is calling methods in the System.Data.Services.Internal namespace.
    http://msdn.microsoft.com/en-us/library/system.data.services.internal.aspx
    Specifically, we see your issue when the ProjectedWrapperMany method is called. You will notice that there is ProjectedWrapper0, ProjectedWrapper1...ProjectedWrapper8 methods also present in the same namespace. As soon as the number of columns exceeds 8, ProjectedWrapperMany is called and we see the error. We're going to ask MS to help analyze the issue since this is an .NET-internal method being called.

  • Itunes store does not open in my computer. I need help...I have worked on this issue for more than 10 hours. I am about to return my new ipod touch.

    I do not have access to itunes store. I tunes store was working well with my old ipod with 30GB wich i had for about 6 years. I went to the store to have the battery replaced. However, I was told that my ipod was ready to be recycle. I received 10% discount to buy an ipod touch with 60GB +. When I connected the ipod touch to my computer, i did not have access to itunes store. Also, none of my music was synced. In addition, the icon for my ipod showed that the battery was not charged even though I charged the ipod touch for more than 8 hours prior to conneting it to the computer.
    I have installed the latest version for itunes 10.6.1. Still I do not have access to itunes store. I have put more than 10 hours trying to solve this issue. I have become frustrated and ready to return my purchase.
    Please help

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Issue selecting more than one photo

    Anyone else having an issue selecting more than one photo at a time in the iPhoto Library. I want to send a whole batch of birthday photos to my sister and I'm forced to send one photo at a time.
    Holding neither the shift or Command key while I click a photo does nthing. This is a new issue. I didn't used to have this problem
    iPhoto 4.0.3

    Quit iPhoto. Try moving the "com.apple.iPhoto.plist" file from your user's "Library >Preferences" folder to the trash. Try iPhoto again.

Maybe you are looking for