Outlook Email Integration proxy issue while using Single Sign-On

Hi All,
This is my first post on the forum, so I'd like to say hello :).
We are using the OEI to attach some e-mails. Unfortunately the Single Sign-On option was not available for us.
Now when SSO supports POST profile it seems like we should be fine. Unfortunately when I try to log in OEI is asking me about proxy credentials - login and password.
I would like to understand on which side GSK or Oracle we need to configure the plug-in and how we can do this. Of course in order to set up proxy.
Thanks a lot, Szymon

I see only two possibilities -
Either update all your LDAP user ids to Upper case
Or Update all your CE user id's and MDM user id's to Lower case.
Thanks,
Shambhu.

Similar Messages

  • Getting an ntvdm error while using single sign-on

    HI!
    When I run GssExample from the tutorial, I get an ntvdm error in a requester, saying "Error while setting up environment for the application. Choose 'Close' to terminate the application.".
    Then I can klick on "Close" or "Ignore". Either way, it takes some seconds and then GssExample is working as expected. But this requester is of course annoying. I get it every time I start GssExample.
    This only happens with single sign-on (useTicketCache=true).
    Using JDK 1.4.0 on Windows 2000 SP2.
    Any ideas?
    Thanks!
    Regards,
    Thomas

    OK.. the error goes away when using jdk1.4.1 but still the system is unable to get the user credentials from the cache :-(

  • Outlook Email Integration issue....

    After release 19 upgrade, few users have reported a strange issue that after they use the 'Add to CRM on Demand' button in outlook to sync their emails, those emails are deleted from the Outlook's inbox.
    They also reported that they are not using the 'Automatic Association' option for syncing. Can you help me resolve this issue.

    Hi,
    Does the user have admin rights to their machine? Registry entries for OEI are writing to the following:
    HKEY_LOCAL_MACHINE>SOFTWARE>Windows>Uninstall>Oracle Outlook Email Integration On Demand
    HKEY_LOCAL_USER>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
    HKEY_LOCAL_USERS>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
    Thanks,
    Sean

  • Error installing Oracle Outlook Email Integration On Demand: Registry Issue

    Good day all-
    Hoping that someone has come across this issue before and is aware of a solution - I have a user that is unable to install the Oracle Outlook Email Integration On Demand plug in for Outlook.
    Outlook is not running when the install is done, yet a "Severe" error pop-up is generated during the install which says: "Setup was not able to write all necessary registry entries. The installation will be aborted!"
    Still see the same issue after a reboot and no other users are having a problem installing it - anyone have any ideas and/or which registry entires the installer is trying to touch?
    Thanks!

    Hi,
    Does the user have admin rights to their machine? Registry entries for OEI are writing to the following:
    HKEY_LOCAL_MACHINE>SOFTWARE>Windows>Uninstall>Oracle Outlook Email Integration On Demand
    HKEY_LOCAL_USER>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
    HKEY_LOCAL_USERS>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
    Thanks,
    Sean

  • Integrating AS 10.1.2 and AS 10.1.3 to use Single Sign-on for BI Publisher

    Hi Everyone
    I was trying to make the following demonstration scenario on the AS and the facilities that can afforded by Oracle to our company:
    Note: I have just one machine for demonstration with Win2003 Enterprise
    First of all, I need to build a portal for my company, this portal will be published to the web through port 80 opened by Microsoft ISA Firewall (ISA installed on different machine):
    1- Portal should be integrated with oracle forms and reports with single sign-on
    2- AS, should have single sign-on authentication to work on port 80 only.
    3- Portal should be integrated with BI Publisher 10.3
    For the objectives mentioned above i have done the following:
    1- install AS 10.1.2 (infra and mid-tier) on the same machine with default installation options (http port 7777 for infra and port 80 for MT). (objective 1 = done)
    2- to make sso works on port 80, i have used webcache as reverse proxy for sso, and it's done but i have error (WWC-41400), but it doesn't affect login on portal, and that is my first problem.
    3- To have BI Publisher to work and authenticate users using single sign-on on port 80 (from outside), I had to install AS 10.1.3 (http on port 7779) on the same machine mentioned above, and then deploy BI Publisher on it, and that was ok, but problem is how to make use of single sign-on to authenticate people listed in oracle internet directory of INFRA installation mentioned above to use BI Publisher on port 80 only.
    So, could anyone please guide me in problem 2 and 3.
    Thanks in advance.
    Anas

    a couple of parameters not configured inside the Tomcat files. Now the SSO is working.
    SNC is not required for sso in bi 4.0
    http://wiki.sdn.sap.com/wiki/display/BOBJ/BI4IntegrationintotheSAPEntreprisePortal+7.0.x
    http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC
    Best Regards

  • How can i add my outlook email to my ipad without useing the Exchange Service?

    Please help me in this, How can i add my outlook email to my ipad without useing the Exchange Service?

    I'm afraid you've posted in the wrong place. This is a technical forum around a particular product called 'SharePoint'. This does talk to Exchange and Outlook in places but we don't specialised in either of those. You should have a look for one of the
    generic Outlook support forums or contact your IT department if it's a work related account.

  • Unattended/silent install "oracle outlook email integration on demand"

    I am looking for how to create sms package for "oracle outlook email integration on demand" (unattended/silent/ install from command line setup.exe /s /v"/qb"????? no luck

    Please post this question on the CRM On Demand Integration Development forum.

  • Where do i change the server in outlook email integration?

    Hi,
    I work with 2 servers (pods) in CRM, but when i installed outlook email integration it conects to one of them and cannot find where to configure the other server, any help?
    thanks

    You can change this in your regedit HKEY_LOCAL_MACHINE: Software: Siebel CRM On Demand: Siebel Outlook Email Integration On Demand
    Change the values for UI Server and Server
    You will have to change this each time you switch pods - as far as i know, unless there is some way you can put two buttons on your outlook and each button pointing to different pods.

  • Outlook 2011 for Mac + Oracle Outlook Email Integration On Demand

    Does anyone know of a "Oracle Outlook Email Integration On Demand" plug in that'll work with Outlook 2011 for Mac?

    jack19stags wrote:
    Hi, 
    Thanks for all of the responses - I have now done these suggested settings which has downloaded all of the separate inbox folders but I am still having a couple of errors: 
    1: If I delete an email on outlook 2011 it doesn't actually delete it from my email account
    Are you 100% sure the account is now IMAP?
    2: I am unable to send any emails I get an SMTP error? 
    Have you ticked the 'My outgoing server requires authentication' box in the outgoing server section.
    3: I still have to click send/receive to receive any emails 
    This is for Outlook 2010 on Windows, but there will be something similar on your version. Go to File>Options>Advanced>Send/Receive where you should be able to set the parameters required.
    Any thoughts would be greatly appreciated 
    Jack

  • How to use Single sign On in CRM2007 ?

    Dear All,
    I have created a launch transaction for launching ransactions from R3 (using BOR).
    Now, the problem is when I click on the link in WebUI it gives me a popup for entering R3 User Id and only then it allows navigation to R3 transaction.
    How do I remove this popup ? I want that since user has already eneterd password for WebUI it should further not prompt him/her for the password. How to achieve this ?
    Can we use Single Sign on ? How ?
    Regards,
    Ashish

    Hi Stephen,
    I have done the settings as per the OSS notes. But, I am getting the following error while navigating to R3 from CRM (BOR Launch transaction):-
    - SSO logon not possible; browser logon ticket cannot be accepted
    - Choose "Logon" to continue A dialog box appears in which you can enter your user and password
    - No switch to HTTPS occurred, so it is not secure to send a password
    Also, after this I get the popup where I have to enter R3 User Id and Password and then it continues.
    But, the whole purpose was to remove this intermediate popup.
    What settings are missing / going wrong ?
    Regards,
    Ashish

  • How to use single sign on to authenticate

    How to use single sign on to use the MS-AD for authentication
    I have created an data source which points to the MS-AD and tested
    Next how do i add this to the policies.
    Thanks
    NS

    Hi,
    Please, specify the products and versions that you are using?
    thanks,
    Thiago Leoncio

  • Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yeste

    Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yesterday. Anyone else having this problem? Thanks.

    I am having the same problem and took the following steps to mitigate it to no avail.
    1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
    2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
    3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
    Please advise.

  • Best practices followed in using Single Sign-On

    Hi Everybody,
    Now here is the toughest situation I have been facing on my project where I have to decide on how to use single sign-on(SSO) or whether SSO is the right solution for my problem.
    Here goes the problem :
    I have been developing a dashboard for my client using APEX 3.0.0.00.20 on Oracle Database 10g Enterprise Edition Release 10.2.0.2.0.
    Now the client do not want to create new logins for the end users on this new APEX application.
    After going through several threads in the forum about SSO I thought SSO might get me there but the confusion is how exactly SSO works for a situation like this.
    As per my understanding SSO would act like an intermediary staging place which would take the existing logins and associate with the APEX logins(please correct me if I am wrong).
    Also when I requested my DBA to install the SSO SDK as per the link http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html#INSTALL I got a reply saying SSO is deprecated and now it is mod_osso.
    I need your thoughts and opinion on what the best practices being followed in projects like these.
    Thanks in advance.
    Raj.

    Teku,
    * You install the SSO SDK into a schema in the Application Express database.
    * You register the APEX site as an Oracle AS SSO partner application using the facilities of the AS Login Server which produces some "keys".
    * You take those keys and plug them into a script that you run in the APEX SSO SDK schema.
    * You create an APEX application and set its authentication scheme to SSO using a wizard or the authentication scheme edit pages in the Application Builder. (From this point on, you can create or modify any number of applications in any workspace (in this APEX database) to use SSO just by using the authentication scheme wizards/edit pages in the Application Builder.)
    *You run the application and get redirected to the login server.
    *The login server authenticates you based on username/password in OID.
    *The login server then redirects back to the requested page in your application.
    Scott

  • BB10 / Z10 and corporate outlook email integration without BES?

    Hi,
    I have tried searching the forums but I can’t seem to find the answer I was hoping for. Currently it still looks like you cannot sync your work email address without BES.
    Can someone please confirm for me because I can setup my work outlook email with my iPhone without an issue. It is in fact the primary reason for me leaving BB and if this is resolved I can throw Blackberry back into the mix when deciding on my new phone.
    Thanks,

    Hi and Welcome to the Community!
    Well, it depends on what they are facing to the Internet. If they are facing POP or IMAP, you certainly can integrate those. If they are facing OWA, then you may or may not be able to...see this KB for clarification:
    KB03133 How to integrate a Microsoft Outlook Web Access email address on BlackBerry smartphone
    The very last part would be the most useful, I'd think.
    But, in general, if other devices can interface to it, then the Z10 also should be able to. However, lacking any further details, it's pretty much a guessing game for us...so if the above does not prove useful, then please provide additional details.
    Most importantly, you may need to skip the auto-config wizard and instead use the Advanced Integration screens, using the same configuration items (e.g., port, server name, etc.) as your other successfully integrated devices use. This may actually be the root cause of your issue (another guess here)...if, for instance, you use the wizard yet your server does not respond back to the Z10 with usable configuration instructions, then it would of course fail to integrate.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Issue while using SUNOPSIS MEMORY ENGINE (High Priority)

    Hi Gurus,
    While using SUNOPSIS MEMORY ENGINE to generate a .csv file using the database table as a source it is throwing an error in the operator like.
    ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS ENGINE connection SUNOPSIS MEMORY ENGINE.
    Caused By: java.sql.SQLException: unknown token
    (LKM used : LKM Sql to Sql.
    IKM used : IKM Sql to File Append.)
    can you please help me regarding this ASAP as it has became the show stopper for me to proceed further.
    Any Help will be greatly Appreciable.
    Many Thanks,
    Pavan
    Edited by: Pavan. on Jul 11, 2012 10:22 AM

    Hi All,
    The Issue got resolved successfully.
    The solution is
    we need to change the E$_,I$_,J$_,...... to E_,I_,J_,.... ((i.e; removing the '$' Symbol)) in the PHYSICAL SCHEMA of SUNOPSIS MEMORY ENGINE as per the information given below.
    When running interfaces and using a XML or Complex File schema as the staging area, the "Unknown Token" error appears. This error is caused by the updated HSQL version (2.0). This new version of HSQL requires that table names containing a dollar sign ($) are surrounded by quotes. Temporary tables (Loading, Integration, and so forth) that are created by the Knowledge Modules do not meet this requirement on Complex Files and HSQL technologies.
    As a workaround, edit the Physical Schema definitions to remove the dollar sign ($) from all the Work Tables Prefixes. Existing scenarios must be regenerated with these new settings.
    It worked fine for me.
    Thanks ,
    Pavan Kumar

Maybe you are looking for

  • System not booting after installing 2010-006 on MacBook Pro.

    Today I've installed security update 2010-006 onto a current model, 13" MacBook Pro (the 2.4GHz one if that's relevant) and now it won't boot, just the spinning circle. If I put it into verbose mode then I get "no suitable image found" and then "the

  • How to include jQuery in my JSlink file?

    Hi, I have a JSlink file and want to add jQuery to it how do i do that?

  • Arabic text appears in reverse

    Hi, Do you know the answer to this? My Arabic text is appearing correctly However If you copy and paste arabic text from MS Word 2000 into Forms the characters appear reversed. i.e. Arabic example appears as elpmaxe cibarA Any idea what I'm doing wro

  • Firefox crashes when I try to start it. (BEX CRASH and APPCRASH)

    Hello, When I try to open mozilla firefox it crashes immediatly giving me 2 errors. BEX crash and APPCRASH. I have this problem now for 2 months and it's really getting annoying anyone knows how to fix it? When i try to open google chrome or IE I als

  • Personalize link does not show up

    I have enabled the Personalize link in the masthead as per the link below: http://help.sap.com/saphelp_nw04/helpdata/en/97/d4ee3d6434445ae10000000a11405a/content.htm but I am not able to see the Personalize link in the masthead. Any idea why? note: I