Outlook Form Region Visible property on outlook 2007.

Hello,
I have this code:
private void AttachementRegion_FormRegionShowing(object sender, System.EventArgs e) {
          try {
              OutlookFormRegion.Visible = false;
              Outlook.MailItem mailitem = ((FormRegionControl)sender).OutlookFormRegion.Inspector.CurrentItem as Outlook.MailItem;
              MailManager mailManager = MailManager.getInstance(mailitem);
              mailManager.NewTask += AddTaskControl;
              flowLayoutPanel1.MouseWheel += flowLayoutPanel1_MouseWheel;
          } catch (System.Exception) { }
But on Outlook 2007 the line "OutlookFormRegion.Visible" bug.

Hello Aurelien,
It is not a bug. The Visible property was added in Outlook 2010.

Similar Messages

Organizer name comes in the Recipients list in outlook form region

Hi,
I have created a custom form region for a meeting in outlook 2010 and VSTO with the message class IPM.Appointment.MyCompanyName. 1) When we either create a new meeting based on that form region or open the existing meeting created based on that form region
from the calendar, the Organizer name is showing in the recipients list i.e., in the To field. 2) If I remove the Organizer name from the recipients list and save the appointment, it shows the message that the "The attendees of the meeting has been changed.
Do you want to save and send update or Close without saving. How to remove the organizer name from the recipients list and save the appointment without asking for this dialog.
Regards,
Vijay

But why would Outlook's behavior change if you have not modified or replaced the To control? Do you see the same behavior if you comment out all of your form region's code?
Dmitry Streblechenko (MVP)
http://www.dimastr.com/redemption
Redemption - what the Outlook
Object Model should have been
Version 5.5 is now available!

Outlook controls in custom form region created in Visual Stdio 2010

Hi,
Is it possible to use all the outlook controls (e.g. Body control, Send button) in custom form region created in Visual studio.
Thanks & Regards,
Vijay

Hi Vijay,
Which control you are not able to use? Based on my understanding, there are two ways to custom the form region in Outlook.
First is creating a new form region by using the wizard. The second is importing a form region designed in Outlook.
In the second secnario, we can use add native Outlook controls to the form region. Native Outlook controls enable you to bind to Outlook data at design time. However, you cannot then use the form region designer to add managed controls or change the design
of the form region.
You can get more detail about this topic form link below:
Creating Outlook Form Regions
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Outlook 2007 error The form region DPOfcX

Hi Guys,
When I open Outlook 2007 or open an e-mail I am getting the following error.
The form region “DPOfcX” cannot be opened. The form region manifest specifies an add-in that is not installed.
I have check in the add-in there is no add-ins at all. I have check the exchange client extensions in there the add-in of nod32, exchange and SAP callender. in the disable add-in there is nothing.
When I start Outlook in safe mode the error don't show at all. What else I have done was to scan the computer with Spybot for malware. Nothing found. the computer is brand new got it on Saterday. When I search
the computer for the DPOfcx do not get any results. I have check in system 32 files and syswow64
Any help I will be greatfull!
regards,
Gerrit

Hi Gerrit,
HKCU\Software\Microsoft\Office\Outlook\FormRegions. Delete the registration for your entry for the MessageClass you are handling.
Removing an addin that way does not unregister it or its dependencies. You should uninstall or remove from Add/Remove Programs or Programs and Features in the Control Panel, or by re-running the installer
and selecting to remove the addin.
If the form region registration is created as part of the installation it should be removed by uninstalling. If it is created later after installation, say by code, you need code such as an installer custom
action to unregister the form region.
Hope that helps.

Coding the controls in form region in Outlook 2007

We are using Outlook 2007. There is a need of adding a drop down control for field "Subject" in the appointment form. I can use a form region for that. Is it true that VB code cannot be used for the form region (in Sue Mosher's book, "Outlook
2007 programming)? Are there any other options? We also use Visual Studio 2008.
Thank you!
Marilyn

Hi Eugene,
I've already created a form region, via form designer in Outlook. And a combobox is bound to Subject field in the default form. But I need to dynamically populate the list in the combobox, according to a folder under which an apportment would be
made. Which means that I need to reference the form region and its controls in a code where I could assign combobox's data source to a table's field. I read some articles on VSTO. Just wanted to make sure there are no better/easier ways than using
VSTO.
Thanks so much for your help!
Marilyn

Voice mail will open in Outlook 2010. The form region "UmOutllokAddinRA" cannot be opened.

I'm running Exchange Server 2007, Outlook 2010 and Lync 2010.
Unified Messaging is enabled. When a voice mail is left, the voice mail is delivered to my Inbox, but the message will not open. I get the error "The form region "UmOutllokAddinRA" cannot be opened. Outlook will use the default form instead."
If I have the Conversation History Add-in for Microsoft Lync 2010 enabled, I also get the error "The form region "IPM.Note.Microsoft.Missed.Voice.Region" cannot be opened. Outlook will use the default form instead." Disabling the
add-in clears the error.
Uninstalling Lync did not help so I'm not sure if that is the issue or not. I've tried reinstalling Outlook and Lync to no success.
Any thoughts?

I am getting the same thing with Exchange Server 2010, Outlook 2010, and Lync 2010.
It appears to be a client side error.
Anyone have any ideas on this?

Downloading Outlook Forms email using EWS

Hi,
I am trying to download the Outlook Forms emails as it is using EWS however the same is not happening. The Outlook Clas Property that I managed to identify by writing some logs is as below.
05/09/2014 06:05:01.875 - Login SuccessFull in Mail Box:shEBSFinanceEs ----------------- Mail Count is : 2
05/09/2014 06:05:02.406 - Mails Item Class Property Is :IPM.Note.Unclaimed Property Request
05/09/2014 06:05:02.593 - Login SuccessFull in Mail Box:shEBSFinanceEs ----------------- Mail Count is : 2
05/09/2014 06:05:02.624 - Mails Item Class Property Is :IPM.Note.Unclaimed Property Request
Appreciate the help!
Regards,
Roshan Rajan

>> I am trying to download the Outlook Forms emails as it is using EWS
Okay you need to post a code sample of what your trying to do to enable someone to comment on it. If you get an error what is the error ? if your having a particular issue what is the particular issue.
Cheers
Glen

Outlook Forms issue

We have Exchange 2007 with SP2 and Outlook 2007 SP3.
Whenever user create and send forms in outlook to recipient, recipient receive it as a blank. So sender save this form in a .msg format and saved it on local disk, send it as an attachment to recipient, but still form is blank. user tried to open saved
form by double, still it appear as blank to original sender. Can somebody please help me with this issue.
Mukesh S MCITP Exchange 2007

Hi mukeshps,
I have some tests in my lab. I use Exchange 2010 with Outlook 2013. Both sending forms directly and saving forms as .msg file can send successfully.
I would like to verify if all Outlook 2007 users can't receive the forms.
If the issue happens to one user, the user can clear the forms cache to troubleshoot the issue.
Here is a thread for your reference.
My form designed in Outlook 2010 can't be viewed by a 2007 user
http://social.technet.microsoft.com/Forums/office/en-US/315d0243-f332-4821-9d27-39ee77a503ab/my-form-designed-in-outlook-2010-cant-be-viewed-by-a-2007-user?forum=outlook
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

JavaMail - Outlook Forms

Does anyone know of a way to read Outlook Forms using JavaMail. I can
successfully read other mail (html, text) but the Forms do not show any
data in Java.
Any ideas?

Were you able to figure this out? I am also attempting the same process without much luck. Any thoughts?

Exchange / Outlook Forms

I have a user who saved some emails that were created by Outlook Forms. The user filled out a form from our Forms library on Exchange. The user archives these emails for audit purposes. The forms were deleted from Exchange a few months
ago and now when the user opens the saved email, it's blank. Is this normal behavior? What options do I have?
d

If the form definition is not accessible, then yes. Typically its cached on the local client, but not always. If the cache is cleared, then it will need to retrieve it again from the server.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Outlook (former Hotmail) Forum says I need to get a "Mail Client" that works with 10.4.11

Hello Apple Friends:
I have a PowerBook G4 still running Tiger 10.4.11.
Unfortunately, due to virus concerns and spam at work, I have had to use non-apple mail such as Hotmail for well over a decade now. Not a problem! Mac works fine. But the folks over in the "Microsoft" (delete that word after reading it) group felt their Hotmail was too old fashioned and jazzed it up and are calling it Outlook now.
And Hotmail/new Outlook no longer works like it did before on the Tiger OSX of course!
After over a month and reading dozens of Emails (about 20 which I sent myself) to various Forums and help groups, the latest "advice" is that I go searching for an "old style" "Mail client" whatever that is.... that will work with Tiger 10.4.11. And install and transfer it somehow, hopefully without losing or deleting 17 years of contacts and Email, transfer over to using it for my Outlook (I looked at some others who have the great modern Mountain Lion etc OSX systems and read their posts about this and they had significant problems using the new Outlook too.
Problem is, I deal with many very stubborn people who are just not going to spend the time and effort needed to "convert" my "hotmail" address into anything new to replace it, not even counting how many weeks of effort, missed emails messed up communications this will entail and last far into 2014 I'm sure.
The best hope is that someone knows of a "Legacy" site with older mail clients on it (or even older browsers than my Safari 4.1.3 in case someone thinks that is the problem (I also tried it with Firefox, but only can have up to 3.6.28 and TenFoxFour is not highly recommended as it creates unstable computers occassionally)
So I'm caught in the middle trying to upgrade older Mac and without the funds needed to purchase one that has Intel Chip in it for use with something higher than Leopard so I can use the Hotmail/Outlook again.
Sorry for long message, but I wanted to cover all the bases in case someone is searching the data base of the Forum in later months, and hopefully someone else here has has similiar total frustration with trying to continue using the "M--------" free Email product.
While I'm on the topic, I wondered if the .Mac was an Email client?   I had it once but long ago subscrption elapsed and got notice that it became "mobile me" or something like that....just covering all the bases since Apple has so many more choices.
Thanks for reading all of this complicated (you should only see the other Emails!) question. (sorry products and username are wrong for this message can't get the hang of editing them "before" I think of writing the message!).

Hi BDAqua:
Just catching up to your earlier suggestions so hope this is not taken as anything less than the excellent advice and fantastic support you have given me here..
I cannot use the current edition of Sea Monkey 2.17.1 as System Requirements are : 10.6 Minimum, and I have Tiger 10.4.11 max in "non-Intel" G4
Note also that reading details (I always do) I cannot just jump to that one if I could or wanted to as too old a Sea Monkey at 1.1.19. They say to upgrade to 2.0 first, then reset the "profile" page (does anyone remember my password or even what Email I used back in 2004??) before moving on to upgrade (use it at least once in new profile of course!)
So I copied them first here for anyone else's information:
System Requirements, Installation and Uninstallation
Before installing, make sure your computer meets the system requirements. SeaMonkey 2.17.1 will no longer offer to migrate your data from SeaMonkey 1.x or Mozilla 1.x at the first start after installation (bug 689437). In order to upgrade from such an old version, install the last SeaMonkey 2.0 release first, do the one-time profile upgrade, uninstall SeaMonkey 2.0 and then install your target release (e.g. this one).
You can find more details about installation, profile data and uninstallation in our install and uninstall document.
Here are the specifics of Minimum Requirements of Sea Monkey 2.17.1 version:
Mac
Operating Systems
Mac OS X 10.6 or higher
Minimum Hardware
Macintosh computer with an Intel processor
200 MB of free hard drive space
Older System Sea monkey 2.0 requirements are ::
Mac
Operating Systems
Mac OS X "Tiger" (10.4)
Mac OS X "Leopard" (10.5)
Mac OS X "Snow Leopard" (10.6)
Minimum Hardware
Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor
256 MB RAM
200 MB of free hard drive space
But..... Caution signs are EVERYWHERE not to download or use this anymore.....
(I know my 1.1.19 is really old but so old no one bothers with it anymore?? but newer ones may have huge security loophole for viruses etc....
Sea Monkey 2.0.14 Warns:
Released April 28, 2011
WARNING! The SeaMonkey version available for download from this page is outdated and suffers from known security vulnerabilities. This page is only available for historic reference.
We strongly advise you to download the current release instead.
So I'm sorry if I could not follow your instructions and get a better Sea Monkey Experience as well..... I'm just using existing one as another browser in addition to the newer ones provided as I use them for different purposes, i.e. Sea Monkey can be great for just interrupted "look ups" on google, etc of a quick definition and then closing it, so nothing complicated, no Java/Adobe Flash ads requirements, etc in and out that's all.
Then I can leave my major browsing and using Email Hotmail/Outllook which prompted this whole exploration of solutions for the two brand new browsers TenFourFox and OmniWeb..
Thanks again to everyone! I replied to everyone below in addition to this reply above to BDAqua....

Outlook 2010 Will Not Connect to Exchange 2007 on SBS 2008 Server

Good Morning,
I have a user who cannot connect to the exchange server on SBS 2008 with outlook 2010. When they start outlook, it shows disconnected and will not connect for a minimum of 20 minutes to an hour. Any suggestions on how to fix this would be appreciated.
I have rebuilt their profile, but that does not fix the issue.
Thank you,
Lee F.
Lee Feldman SMB Consultant

Hi,
Thanks for posting in the forum.
Regarding the current issue, since you have recreated the user profile without any issue, I suspect that it’s mainly caused by the network issue. At this time, please first check the TCP/IP
configurations as Larry mentioned. Then, please also refer to the article below for details about how to troubleshoot Outlook connectivity issue.
Troubleshooting Microsoft Exchange: Outlook Connectivity Issues
http://blogs.technet.com/b/mspfe/archive/2011/04/12/troubleshooting_2d00_microsoft_2d00_exchange_2d00_outlook_2d00_connectivity_2d00_issues.aspx
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Webdynpro for ABAP, Enhancement and change of standard "visible" property

Hi
Is it possible to change the standard Webdynpro element (in cProjects application), so that the original control "Input" from visible property "Visible" is changed to mine Context variable? How to change that default "Visible" flag in standard element?
thank you

Hi Phani,
Thanks for the info.
I am able to see if it is not interactive.
Displaytype is native only.
Let me explain you the issue in detail:
Currently Client is calling ZFORM thro Java. They have some issues with JAVA so they want to use Webdynpro to call that ZFORM and the form is ABAP Dic based.
For Templete source I gave ZFORM name, and it automatically created a 'NODE' wrt the context in the ZFORM.
Now I have to pass data from difft node attributes to that 'NODE'.
Thanks in advance,
GG

How to increment array that contains two clusters whose visibility is controlled by a visible property node and selected by a radio button.

I am trying to use a property node: visible in order to enable or disable one of two clusters. These clusters are in a larger cluster and this larger cluster is in an array. The two clusters are controlled by a radio button (one labeled transistor and the other diode). When diode is selected, the corresponding diode parameters cluster should be visible and when transistor is selected, the corresponding transistor parameters cluster should be visible. In the mean time, the cluster of the device that is not selected should not be visible. There are at least 45 elements in the array (but not more than 45). Data is entered into each cluster (diode or transistor data) for each element in the array via the increment/decrement. The problem is when you select the first radio button (transistor) and enter data, when you increment the array for a new device selection, since a visible property node was used on the cluster, a loop is created where a new cluster is trying to be shown, but the old cluster is also trying to be shown (because it is the one referenced by the property node. How do I get rid of this loop and still be able to increment the array and keep my data intact for future use? Attached is the vi
Attachments:
ChooseScan.vi ‏17 KB

You could try something like this. However, if you know how to use an xcontrol, that would be a better way to implement the above functionality so that these UI characteristics are not a part of your main VI. The problem with the above VI is that you're looping every 100 ms just to update your UI.
Also, try using the "disabled" property node, instead of the "visible" one. That way, the user will still see the options he has but they will be grayed out.
Message Edited by Sudhir Gopinath on 06-25-2007 04:45 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
ChooseScan_1.vi ‏19 KB

Bind form region controls at runtime

Hi,
I have a combo box in an appointment form region. I want to bind a List<string> to it at runtime.
Could anyone please help how to do this.
Thanks,
Stanley

Hello Raj,
You can use the
ItemsSouce property to set a collection used to generate the content of the ItemsControl.
You can find the ComboBox class described in MSDN.
The form regions are represented using regular user controls in VSTO projects. I'd suggest asking Windows Form specific questions on the
Windows Forms General forum instead.

Outlook Form Region Visible property on outlook 2007.

Similar Messages

Maybe you are looking for