OutOfMemoryException when linked from Access to SharePoint

I have an Access database that is linked to lists in a SharePoint site. Recently I am unable to run any reports. When I try to run any underlying queries, or open the tables, I get an OutOfMemoryException error. Can anyone advise me where
to begin to hunt this down?
There are no mistakes; every result tells you something of value about what you are trying to accomplish.

Hi,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Similar Messages

Firefox wont open webpage when linked from another program

When linking from other programs, a new firefox window will open, but displaying a blank page instead of loading the page. I checked for firefox being the default web browser, but I cant figure out what other options may be important. It actually started happening when upgrading to Ubuntu Natty, did not happen when using ff 4.0.1 on maverick. Any Ideas? Thanks for the help.

First and foremost, please update Firefox to '''3.6.17''' by clicking '''Help'''| '''Check For Updates'''.
The reason for this is because there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.<br><br>
See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/<br><br>
As regards your problem, you may have a corrupt '''places.sqlite''' file.
Please see: http://kb.mozillazine.org/Locked_or_damaged_places.sqlite<br><br>
and [[Error loading web sites]]

Restrict URL Access when linking from report

I have an application that will be a little like a wizard in that I need to control how users get to a form, so I would like to prevent them from being able to just going straight to that page and entering data into the form. I tried using various session state security options, including No URL Access, but that blows up when I try to link from a report to that form for editing purposes.
Is there some way I can link from the report if the target page restricts URL access, and can get a get a brief overview (or point me to some documentation) on the various branch types? I can't find a good explanation anywhere and I'm hoping that solves my problem.
thanks.

Hi,
1.
What about using an Authorization Scheme and then using Security of Page Attributes.
In fact it is schema of users, roles, and passwords.
2.
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
f?p=6000:6004:&SESSION.::NO:6003:MY_ITEM1,MY_ITEM2,MY_ITEM3:1234,,5678
This example:
* Runs page 6004 of application 6000 and use the current session ID
* Clears the current session's cache for items on page 6003
* Indicates debug information should be hidden (NO)
* Sets the value of MY_ITEM1 to 1234, sets the value of MY_ITEM2 to null
(indicated by the comma used as placeholder), and sets the value of MY_ITEM3 to 5678
- Into Column Attributes/Column Link/Link Text pick an icon.
- Select for Attributes/Column Link/Target “URL” for table Emp_Address and into URL field type:
javascript: popupURL('f?p=&APP_ID.: 6004:&SESSION…………');
You can use the value of any Item. Then in the URL link page check that item.
Moreover, you can use f?p=&APP_ID.: 6004:&SESSION…..My_Item:#ReportColumnName#.......
I hope this would help.
Konstantin

Query Problem when converting from access to Mysql

I am trying to get a small application to work with a mysql
db. The original
db is access, for some reason I am getting an error now that
the db has been
converted over to mysql. Any gurus out there spot the
problem. Here is the
query:
<cfquery name="getprevmonth"
username="#request.myDBUserName#"
password="#request.myDBPassword#"
datasource="#request.myDSN#">
SELECT cal_date,(day(cal_date)) AS theprevmonth
FROM jot_eventcal
WHERE (cal_date >=
#CreateDate(Year(prev_date),Month(prev_date),1)#) and
(cal_date <=
#CreateDate(Year(prev_date),Month(prev_date),DaysInMonth(prev_date))#)
</cfquery>
This query works fine when I test the application Locally, it
only messes up
when I test online. The error code is:
Syntax error or access violation: You have an error in your
SQL syntax.
Thanks for any assistance in advance...........and a happy
new year to you
all.

I don't know the answer but, it might be that using
createdate is not sufficient. Try wrapping that date into either a
cfqueryparam or createodbcdate.
Something else to bear in mind when switching db's is that
they don't all have the same functions. I don't use mySql so I
don't actually know, but I'd be checking the manual to make sure it
has a day function.
Not a syntax, but a potential logic error is that you are
using a function called day to create an alias called theprevmonth.
At the very least, it's misleading and might confuse you later
on.

PNG images disappear when linked from FM

I am testing the Technical Communication Suite 4. My images are mostly JPGs, and they transfer correctly when I update Robohelp from a linked FrameMaker file. However, I have found that PNG images in the FrameMaker file simply disappear from the update. They don't appear in the Robohelp topic. There is no trace of them in the HTML code view in Robohelp either.
Have others had this experience? Is there a solution?
I am told PNGs are preferable to JPGs in some cases because they load faster on the target device (an iPad, in the case I was told about).

Frankly, I forget because I don't have images in my content. If you don't have a copy of FM8 Fundamentals at hand, try checking the scriptorium.com KB for the info.

Permissions error when migrating from Access 2000

Hi
I have an Access 2000 database that is pretty small - only has 8 tables, total DB size is < 24MB. I've gone through all the steps of creating the Oracle model etc and all went without a hitch. However, when I come to migrate table data I get the following error:
Unable to migrate data from source table "tbl Case" to destination table CDSS.tbl_Case : CDSS.tbl_Case; [Microsoft][ODBC Microsoft Access Driver] You do not have the necessary permissions to use the "C:\Customers\Vancouver\CDSS\Database\CDSS.mdb" object. Have your system administrator or the person who created this object establish the appropriate permissions for you.
There is no security on the Access database so I'm a little unsure as to what is causing this error to occur; does anyone have any ideas?
Thanks very much

There is an option in the users guide for switching off any security in Access. This should solve the problem with permissions

DHTML hotspots don't work when linked from Framemaker

I'm using Adobes Technical Communication Suite 4 on a 30-day trial to determine how well it will work for single-source publishing. I'm familiar with Robohelp (having used it for over a year) but have had almost no experience with Framemaker (and none with version 11, which is part of the suite).
Until now, we've been writing in Word and importing files into Robohelp. We use the Dynamic HTML features of Robohelp to create drop-down and expanding text (usually to provide the definition of a term). Word doesn't provide a way to create them, so it has to be done in Robohelp after import. However, with Framemaker, I should be able to create these features in FM have them appear in a linked RH file. There is a Framemaker menu to support their creation.
But when I attempt to do this, it doesn't work. The " text caption" (that the user clicks on to see the expanded or drop-down text) imports correctly into RH, but the expansion does not work. When clicking on the caption text in the HTML preview, the only thing that happens is that a single space appears where the drop-down text should be. The drop-down text itself remains invisible. (But I know it's there because I can find it in the HTML source code view.)
I am probably doing something wrong when I set this up in FM. Here is my procedure.
First, I type the text that will be clickable by the user to elicit the drop-down (this is what I presume Adode means by "text caption"). Then, in a new paragraph, I type the text that is intended to be displayed in the drop-down.
The instructions (for drop-down text) in the help say:
"Select the text or paragraph on which you want to place the drop-down text caption. "
So I select the "text caption" text.
"Select Adobe RoboHelp > Dynamic HTML Effects > Drop Down Caption"
I select that menu choice.
"Select the text that should appear as drop-down text in your online help page."
I select the next paragraph, which contains the drop-down text.
"Select Adobe RoboHelp > Dynamic HTML Effects > Drop Down Body"
I select that menu choice.
I save the file and then switch to Robohelp and update the linked file.
The "text caption" then appears in the RH file, but the drop-down text does not appear (except in the HTML source code).
What am I doing wrong?

Problem solved, through experimentation.
For the benefit of those who may experience this problem in the future: the secret is that there must be exactly one return (i.e. one press of the Enter key) between the "text caption" and the "drop-down text".
If the text caption and drop-down text are on the same line, it doesn't work (the coding for the text caption is disrupted) and if there is anything besides a return between them, it doesn't work (the drop-down text is not displayed).

PDF not opening in IE 10 when linked from robohelp 8

It will be really great if you could help me with my query. I am using Robohelp 8. I have created a topic page and linked a pdf file to it as a bagge file so that when one clicks the topic in the TOC, the pdf file opens. When I generate the output, the pdf is opening in IE 8, 9. However, the pdf is not opening in IE 10. Please suggest a solution.

Sounds like a security setting, check if it’s working with FireFox or Chrome

Unable to Create Oracle Model When Migrating from access 2000 to Oracle

Hi ,
I am migrating an access 2000 Database to Oracle 9i using Oracle Migration Workbench .
I was sucessful in creation of Source Model ,but when I try to create the Oracle Data Model - Oracle Workbench
HAngs . In short the Oracle Model creation log screen hangs .
If any body has faced any similar please help me out .
Please suggest a work around for this problem .
Thanks in Advance
Arun

Arun,
Can you provide a reproducible test case so that we can confirm the behavior here and log a bug? More detail can be found in the log/Error.log in case there is a java exception that is being thrown.
Regards,
Turloch
Oracle Migration Workbench Team

Safari not saving pages in history when linked from GMail

Ok, no one else is having crashing problems with GMail. Fine.
How about this one... If you click on a link in a message while reading GMail, a new window will open with the destination web page.
Now, if you click a link on that new page, the new location will open, but Safari did not save the original location in the history - the Back button is disabled, and it's not in the History menu.
Now.. where's that "report bug" link...

can you view the source code ( Safari-View-View
Source ) of the main page, to see if it is the
coding that prevents the back/forward & history in
the new windows that are opened ?
I'm looking at an email in Gmail, and it has this link:
http://wiki.rubyonrails.org/rails/pages/ActsAsTaggablePluginHowto/versions/32
I click on it and that page opens in a new window. In that window, I click on the first link in the body, http://rubyforge.org/projects/taggable/, and that page opens in the same window, but there's no history I was at the wiki.rubyonrails.org page.
Looking at the source for both the Gmail page and the wiki page doesn't indicate any special coding to achieve that. Frankly (I do web development), I'm not even sure how GMail would be able to control the new opened window and how the links would behave - not to mention being able to not store a clicked link into the history.
Needless to say, this does not happen in Firefox or Omniweb.
Well, whatever the problem is, it still exists in the latest version of Safari - from http://nightly.webkit.org/

Browser "back" button won't work when linked from Catalyst graphic

I am using Flash Catalyst in (CS5 Design Premium) because I am much more a print than web designer so bear with me.
I created a .swf file in FC, and placed it at the top of a "router index" page. I linked 10 "buttons" in the .swf, each to a different anchor on the "router index" page. Clicking on each "button" jumps to the correct anchor, so far so good.
The problem is, when I hit the browser "BACK BUTTON" in IE only (Safari and Firefox work fine), it does not jump back to the top of the "router index" page. It jumps back to a previously opened page (homepage or another page), instead of back to the FC .swf graphic on the "router index".
FC apparently only allows linking to "absolute" URL's, not "relative" URL's, (so my links to the anchors are "absolute"). I don't know if this is the source of the problem with IE. I have always linked to anchors previously in Dreamweaver using "relative" URL's, and have never encountered this problem.
I looked over the files that FC creates and cannot find one that I understand, or shows an editable file path that I can change.
I hope i don't have to buy Flash Builder. Right now I have Design Premium. And... I don't understand Actionscript.

Hi azaral
Take a look at Project > Quiz Manager... > Quiz
Settings tab. My guess is that you have DE-selected the "Allow
backward movement" check box.
Cheers... Rick

False alarm error messages when Linking from e-mail to web

About 30-40% of the time that I try to link to the web from a URL embedded in an e-mail, an error message comes up saying that the program's unable to connect to that particular URL (which it cites). But then it almost always goes ahead and takes me to the right website. Why is this happening and is there a way I can stop it? It's a nuisance to always have to read the alarm and then needlessly worry that the connection to the website cannot be made. Thanks.

Hi,
you have something like:
end_of_data = ' '.
first_call = 'X'.
WHILE end_of_data = ' '.
        CALL FUNCTION 'RSDRI_INFOPROV_READ'
          EXPORTING i_infoprov             = ....
                     i_th_sfc               = ...
                     i_th_sfk               = ...
                     i_t_range              = ...
                     i_reference_date       = ...
                     i_save_in_table        = ....
                     i_save_in_file         = ....
                     I_USE_DB_AGGREGATION   = ...
                     i_packagesize          = 100000
                     i_authority_check      = ...
          IMPORTING e_t_data               = .....
                     e_end_of_data          = end_of_data
          CHANGING   c_first_call           = first_call
          EXCEPTIONS illegal_input          = 1
                     illegal_input_sfc      = 2
                     illegal_input_sfk      = 3
                     illegal_input_range    = 4
                     illegal_input_tablesel = 5
                     no_authorization       = 6
                     ncum_not_supported     = 7
                     illegal_download       = 8
                     illegal_tablename      = 9
                     OTHERS                 = 11.
ENDWHILE.
hope this helps...
Olivier.

RH server 8 - upscaling from Access to SQL Server 2008?

Hi gang-
We are currently running RoboHelp Server 8 on the default Access database and Tomcat. We would like to increase the number of help projects that are tracked by the RH Server, and have concerns that Access will handle the increased load, so we are considering upsizing to SQL Server 2008.
Our IT people think this should be fairly straightforward, but want to know if Adobe provides any tool or has any recommendations when upsizing from Access to SQL Server.They are concerned about retaining things like primary and secondary keys, as well as any indexes that are currently in Access.
If anyone has experience with such a migration, please share!
Thanks,
-=Ed.

We are also currently on an Access DB and considering (have been for some time but that's a different story) upgrading to SQL Server. There is no migration tool from Access to SQL Server provided so you'd have to allow some additional effort if you want to retain the data. I am not an expert on DBs but I'm sure there are ways to migrate the data. I have found a few links when searching on Google. For example:
http://support.microsoft.com/kb/237980
Adobe does provide a cheat sheet at the link below which may be useful to you.
http://blogs.adobe.com/techcomm/2009/05/advanced_database_setup_for_robohelp_server_8.html
The RoboColum(n)
@robocolumn
Colum McAndrew

Pages created by Template view and preview Ok - Except when linked on page

I created a template in DW. The template contains a background image and an editable region. I made some pages using the template / updated my pages and saved them as html. I have worked with templates before.
Here is the problem. I can open, view the html files in DW that I applied the template to, they look normal. I can preview the files in IE.
If I click a link in lets say the index file, to another lets cay contact.html file that I applied the template to, it only loads the editable region and I don't see the template applied. If I pull up the file, say contact.html in DW the template is applied and if I preview it the page displays. No background image or dropdown includes are on the page and the template is not applied for some reeason in preview when linking from a hotspot. The path is correct.
I tried this several times and still no luck. I even uplopaded to the web and the same thing is happening.
Please advise as to what I should look at? I can direct you to an example if need be. -
Dreamweaver MX user.
Thanks,
Greg

Here is the code of an html file in which the region is editable. The template has been applied to this page and is one of the pages that is having a problem.
I will need to look further into your last response, although it makes perfect sense to a webmaster like yourself, it only makes partial sense to me but I do undertand the point. I will look into that furher, thank you for your response.
When looking at the code, my Background image was repeating and I do not want it to. I edited some of the code and although, it does not look clean, it does work. Maybe this is part of the problem.
In this example, I did get the background to work, not sure how, but my includes and a image over the background with the hotspots are not wodking.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>

<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css">

</style>

</head>
<body background="Background/final3/final.jpg" style="background-image: url(/html/Background/final3/final.jpg); background-position: top left; background-repeat: no-repeat;">
<table border="0" width="942" cellpadding="0" cellspacing="0">

<tbody>
<tr>
<td height="25" width="13"> </td>
<td width="244"> </td>
<td width="16"> </td>
<td width="296"> </td>
<td colspan="2" valign="top">
<table border="0" width="100%" cellpadding="0" cellspacing="0">

<tbody>
<tr>
<td height="25" width="214" valign="top"></td>
</tr>
</tbody>
</table>
</td>
<td width="159"> </td>
</tr>
<tr>
<td height="81"> </td>
<td> </td>
<td> </td>
<td> </td>
<td width="168"> </td>
<td width="46"> </td>
<td> </td>
</tr>
<tr>
<td height="44"> </td>
<td rowspan="3" valign="top"><img border="0" usemap="#Map" width="244" src="Background/final3/roll.gif" height="372" /></td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td height="125"> </td>
<td colspan="3" valign="top">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="480" height="125" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0">
</object>
</td>
<td> </td>
<td> </td>
</tr>
<tr>
<td height="203"></td>
<td> </td>
<td rowspan="2" colspan="3" valign="top">
<table border="0" width="400" cellpadding="0" cellspacing="0">

<tbody>
<tr>
<td height="46" width="400" valign="top">
<div align="left"><img width="250" src="images/seminars.jpg" height="46" /></div>
</td>
</tr>
<tr>
<td height="698" valign="top">
<p><img width="471" src="images/seminarsscan.jpg" height="433" /></p>
</td>
</tr>
<tr>
<td height="8"></td>
</tr>
</tbody>
</table>
</td>
<td> </td>

</tr>
<tr>
<td height="42"></td>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td height="128"></td>
<td></td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
</tr>
</tbody>
</table>
<p>
<map name="Map">
<area href="contact.html" coords="56,7,166,46" target="_self" shape="rect"></area>
<area></area>
<area href="about.html" coords="50,57,160,85" target="_self" shape="rect"></area>
<area></area>
<area href="http://www.tailgatetalks.com/" coords="33,98,155,128" target="_blank" shape="rect"></area>
<area></area>
<area href="images/final2_16.gif" coords="20,140,161,176" target="_self" shape="rect"></area>
<area></area>
<area href="http://www.couragelearning.com" coords="23,188,176,222" target="_blank" shape="rect"></area>
<area></area>
<area href="http://www.scottenvironmental.com/" coords="29,234,231,267" target="_blank" shape="rect"></area>
<area></area>
<area href="consutling.html" coords="53,277,235,314" target="_self" shape="rect"></area>
<area></area>
<area href="HeatWebinar.pdf" coords="88,327,240,359" target="_self" shape="rect"></area>
<area></area>
</map>
</p>
</body>
</html>

Will not load sites linked from another website--have cleared cache, cookies, history, restarted, checked in Safe Mode--still does not work.

Some sites load fine. But some sites will not load when linked from another web site, or, occasionally, even from my bookmarks. I went through troubleshooting routine--cleared cache and cookies, history, checked in Safe Mode for extensions, etc., but still will not work in Safe Mode. No other problems with computer or browser.

What happens when you click the link that does not open up the new page? Is it a blank page? Does this also happen if you Shift Click the link?
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

OutOfMemoryException when linked from Access to SharePoint

Similar Messages

Maybe you are looking for