Output *.csv or *.txt
Hi @ all,
this may is a easy question - but not to me today I tried to put out a *.csv file over Fileadapter (File Content Conversion)...
But somehow this doesn't work. I'm on SP 16 and in my File Receiver Adapter I configured following:
Recordset Structure: person,*
and in the Parameter Part:
person.fieldSeparator => ;
person.fieldNames => f1,f2,f3,f4,f5,f6,f7,f8
person.fieldFixedLengths => 8,4,2,2,10,10,10,20
person.processFieldNames => fromConfiguration
In my RWB it result with error: - 2006-05-11 15:50:50 CEST: Error: Conversion initialization failed: Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
Thanks (and points) for any help
Matt
Hi,
If you have .csv file don;t give Fixed Field lengths in the Content conversion.
person.fieldSeparator => ;
person.fieldNames => f1,f2,f3,f4,f5,f6,f7,f8
person.processFieldNames => fromConfiguration
Go to RWB->Adapter Monitorig for the errors.
Thanks,
Moorthy
Similar Messages
-
How to save in CSV or TXT file the Powershell script output?
Hi,
I am not sure how to expot this to csv/TXT file, should I use export-csv "c:\test.csv" ?
my code:
$site = Get-SPSite "http://tst.pg.com/sites/tsta"
Write-Output("`n" + $site.URL)
$myweb = $site.AllWebs | where {$_.url -eq $site.url}
Foreach ($list in $myweb.Lists)
if($list.BaseType -eq "DocumentLibrary")
Write-Output("")
Write-Output("Doc Library Name:" + $list.Title)
Write-Output($list.roleassignments | ft Member,RoleDefinitionBindings -auto)
}$site.dispose()Hi there - If you just want to dump the output as a txt file, how about the following?
.\yourpowershell.ps1 > output.txt
Please remember to mark your question as answered and vote it helpful if this solves or helps with your problem. ******************************************************************************************************* -
[b]export data from a table to a csv or .txt file[/b]
hi plz i need help in how to export data from a table to a csv or .txt file
If you are using TOAD, then you can execute the statement like SELECT * FROM TABLE1
Then, you can go to Output Grid and you can say save as and you can save it as you want, excel, tab delimited or whatever.
Thanx,
Cheers, -
Print from .csv or .txt file
Hello Experts,
I am new to ABAP development.
Is there any way to print the content of an .csv or .txt file.
For example my report will have a selection screen where we will upload a file containing "Hello world" when we execute the output screen will show "Hello World".
Regards,
SarnavaHi Sarnava,
If your are selecting file from your system desktop then use GUI_UPLOAD to upload data in data_tab and then while applying loop at this internal table split the code at ',' or space and fill internal table with your relevant fields.
Loop at final internal table and display on output screen.
DATA: BEGIN OF I_APPFEED OCCURS 0,
RECORD(200) TYPE C,
END OF I_APPFEED.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE (path of .csv file from desktop)
TABLES
DATA_TAB = I_APPFEED
LOOP AT I_APPFEED INTO GWA_LOC_APP.
SPLIT GWA_LOC_APP AT ','
into wa_fields.
append wa_fields to it_fields.
endloop.
loop at it_fields into wa_fields
write: wa_fields-fields.
endloop.
Hope, this will solve your issue or let me know if you want something else. -
Download of report output layout to .TXT
Hello ,
Is there any FM to download the normal report output layout to .TXT with the layout design.
Thanks in advance.
Regards
JaiHi,
Normally report out put means data is available in internal table, so use these links
Download CSV file in presentation server through FM GUI_DOWNLOAD
Re: how to create a CSV file
type-pools:TRUXS.
data: begin of itab occurs 0,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
end of itab.
data: itab1 type TRUXS_T_TEXT_DATA.
select vbeln
posnr
up to 10 rows
from vbap
into table itab.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
I_FIELD_SEPERATOR = ','
TABLES
I_TAB_SAP_DATA = itab
CHANGING
I_TAB_CONVERTED_DATA = itab1
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:TEMPtest.TXT'
TABLES
data_tab = itab1
EXCEPTIONS
OTHERS = 1. -
How can we export the data from OAF Page to Excel instead of .csv or .txt
Hello,
How can we export the data from OAF Page to Excel instead of .csv or .txt
When i click on the export button it is exporting to txt file, But i need to export the data into Excel by default
Please help me
Thanks in advance
Thanks,
Raju
We have changed the below profile option to get the data in excel by default
Profile Name Export MIME type
Profile Code FND_EXPORT_MIME_TYPE+
Existing Value: text/tab-separated-values+
Change as: Excel
Thank you,
Raju
Edited by: 1006649 on May 21, 2013 10:55 AMWe have changed the below profile option to get the data in excel by default
Profile Name Export MIME type
Profile Code FND_EXPORT_MIME_TYPE+
Existing Value: text/tab-separated-values+
Change as: Excel
Thank you,
Raju -
Writing BLOB column into a csv or txt or sql files
Hi All,
I am having a requirement where i have to upload a file from user desktop and place that file into a unix directory. For this i am picking that file into a table using APEX and then writing that file in unix directory using UTL_FILE.
The problem which i am facing is that after this every line in my file is having ^M character at the end.
For this i modified my BLOB column into a CLOB column and then also i am facing the same problem.
Is there any way to get rid of this as i have to upload these csv or txt files into tables using sql loader programs. i can;t write any shell script to remove ^M character before uploading as this program will be merge with existing programs and then it will require lots of code change.
Kindly Help.
Thanks
AryanHi Helios,
Thanks again buddy for your reply and providing me different ways.... but still the situation is i can;t write any shell script for removing the ^M. I will be writing into a file from CLOB column.
Actually the scenrio is when i am writing a simple VARCHAR columns with 'W' mode then it is working fine, but i have a BLOB column which stores the data in binary format so i am converting that column into CLOB and then writing it into file with 'W' mode but then i am getting ^M characters. As per your suggestion i have to then again run a program for removing ^M or i have to modify all my previous programs for removing ^M logic.
I want to avoid all these, and just wanted a way so that while writing into a file itself it should not have ^M. Else i have to go for a java stored procedure for running a shell script from sql, and in this still i am having some problem.
Thanks Again Helios for your time and help.
Regards
Aryan -
How to write csv or txt file through utl_file with UTF-8 Encoding
Hi All,
I need your help to write the data from DB to csv or txt file with UTF-8 encoding through utl_file.
Database character set:AL32UTF8
Database version:10G
All the columns in the DB are of varchar2 type.
Please let me know if there is any way of doing it.What was wrong with the info provided in the link(s) given?
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions027.htm#SQLRF00620] -
Polish Characters XLS to CSV to TXT conversion issue
Hi,
I am trying to convert the XLS file to CSV and then to TXT (UFT8) file but the polish characters are shown as "?" in CSV and TXT file. Any experts help please.
Thanks,
GenooAny help please, its quiet urgent.
Thanks,
Genoo -
Output CSV File Naming Convention - Receiver File Adapter
Dear SAP experts,
I need help regarding my scenario.
My scenario is this, Customer will send EDI message to XI. XI will then translate the message and convert it into XML.. After, a Receiver File Adapter will receive the XML then convert it into .csv file.
I've already configured the Receiver File Adapter to convert the XML into .csv file.
But, my problem now is how will I configure to have my output .csv file has a File Naming Convention.
The output .csv file must be "CustomerName_YearMonthDate".
From the EDI message, there is indicated Sender GLN in which, each customer has its own Sender GLN.
E.g., Globus --> 200, Karstadt --> 300, Metro --> 400.
How will I configure so that I can have an output .csv file of,
If Globus sends the EDI message, the output .csv file is Globus_20080304.csv.
If Karstadt, Karstadt_20080304.csv.
If Metro, Metro_20080304.csv.
Kindly advise for a clear and complete solution.
Thank you very much for your usual support.
FredHi Nisar,
My target message (XML) in the mapping is this,
- <ns0:CSV>
- <SLI>
<PERIO> </PERIO>
<ILN> </ILN?
<EAN> </EAN>
perio, iln, and ean was rooted on SLI field. and the CSV is the rootnode of the target message.
I have created a UDF on the message mapping to accomodate the output customer name, here is the codes:
String fname="";
if(GLN.equals("23456"))
fname ="Globus" +dat;
else if(GLN.equals("5678"))
fname ="Karstadt"+dat;
else if(GLN.equals("6789"))
fname ="Metro"+dat;
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/File",
"FileName");
conf.put(key,fname );
E.g.,
Globus --> 23456 (Sender GLN)
Karstadt --> 5678 (Sender GLN)
Metro --> 6789 (Sender GLN)
This UDF i've made in the Message Mapping was mapped in the root node CSV.
Is this UDF correct?
Then on the File Receiver Configurations, here are the configs,
Transport Protocol: File System (NFS)
Message Protocol: File Content Conversion
Adapter Engine: Integration Server
File Access Parameters
Target Directory: /var/opt/gsss/sample/csv
File Name Scheme: .csv
Processing Parameters
File Construction Mode: Create
- Overwrite Existing File
Write Mode: Directly
File Type: Text
Variable Substitution --> ???
Adapter Specific Message Attributes
- Use Adapter-Specific Message Attributes
- Fail if Adapter-Specific Message Attributes Missing
- File Name
Run Operating System Command After Message Processing
Command Line: chmod 664%F
Content Conversion Parameters
Recordset Structure: SLI
SLI.addHeaderLine: 3
SLI.headerLine: PERIO;ILN;EAN
SLI.fieldSeparator: ;
SLI.endSeparator: 'nl'
Adapter Status:
Status: Active
Kindly advise if my configs are correct.
Thank you very much!
Fred -
Need existing custom script to run with a .csv or .txt file
Hi, Scripting Guys!
I am a very novice novice when it comes to PowerShell -- I'll state that up front. So apologies if the answer to this is really basic. I am trying to use a script written by someone else, where I can simply paste in the script, identify the user by any one
of several attributes, and the magic happens (in this case, all mail attributes in the AD Object are cleared and then the email address is added back in, resetting that object to the point where IDSync can run). For a single user at a time, it works
perfectly.
.\Reset-MailAccountforIDSync.ps1 -Identity "[email protected]"
My problem is that I have a .csv file with 60 users I need to run this script on, and there's a possibility of other large batches in the future. How can I convert this single user script into one that can work with a .csv or .txt file?
Thanks, Stormicat/J.L.NewmarkThis will do the trick.
$csv=Import-Csv users.csv
foreach($user in $csv){
.\Reset-MailAccountforIDSync.ps1 -Identity $user.Mail
Of course you will have to learn enough to understand that so start here:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
¯\_(ツ)_/¯ -
Exportpdf formats - excel, csv or txt
How do I use exportpdf online to export to excel, csv or txt?
Try following forum:
http://forums.adobe.com/community/exportpdf?view=discussions -
SPRY using .csv or .txt file
Hello,
I am interested in any ideas on the best way to get Spry
working with a .csv or .txt file? We sometimes have the misfortune
<vbg> of having to take others files (.csv or .txt file) and
display them in a table format without converting them.
I looked at the raw data non-xml example but that is using
some static data.
Thanks in advance...
MattHi Matt,
You might want to take a look at my patched version of Spry,
where I added JSON support to Spry. It's available here:
Doug's Spry Patch.
It would be pretty easy to add a CSVDataSet or a TxtDataSet
using what I put in place there.
However, please note, this is of course not officially
sanctioned by Adobe, and I know they are working on a way to offer
support for different kinds of data in the next version, so this
might all get chucked out the window in the next round. But if you
really need it now, then this might be an avenue you'd want
to explore.
-Doug -
Output csv file with blank line
Hi Fellow PI friend,
I encountered 1 problem where my output csv file always come with 2 blank lines after data line record. Can someone give me some advise or tip how to solve it?
Thanks in advance.Hi ,
Check if this link throws some light on your issue:
Junk character at end of file from sender adapter creating a blank record
Regards,
Ravi -
Write to local CSV (or txt) file on iPad -- access via iTunes
I'm trying to figure out how to write to a local CSV (or TXT) text file on the iPad. I've got UIFileSharingEnabled working--iTunes sees the app as available for file sharing. However, via FileStreram, I can't find where to save the file to? I've tried all the options I know of;
* documentsDirectory
* applicationDirectory
* desktopDirectory
* userDirectory
* applicationStorageDirectory
...but the file doesn't show up in iTunes. Anyone have any suggestions? You game developers must have this figured out for 'high-score' and preferences.
ThanksHi, did you find any solution for this problem?
I'm also looking for an answer...
Maybe you are looking for
-
Changing the period in Reversed payment document
Dear All, I badly need your help. I have reversed one Payment document in wrong period. Now Payment document is in period 09 while reversal document is in period 10. Is there any way to undo this reversal or else change the period in the reversed doc
-
My account is gone and no record of my purchasing adobe acrobat 9 a few years back
I purchased adobe acrobat a few years back and am now having trouble with my program malfunctiong. I went to the adobe web site and My Acounts and it no longer exist. I set up a new account and tried to register my product but they wanted a serial #
-
Access plot colors programmatically
Hi all, When plotting multiple plots on the same axes, Labview automatically assigns each plot a different colour. How can I programmatically access this colour sequence (an array?) and set it with an array of colours I choose? Regards, Jamie Using L
-
Internet Load Balancing - Routing Issue
Dear all, good day... in our ministry we are going to contract with 2 ISPs to provide us with the internet service (one of them will be the main line 16 MB, and the other line will be working as a backup line). Now, here is my question, is there any
-
Multiple Hierarchy in Dimension and ENT-06972: while viewing them
Hi I am running owb 10gr2 patched 10.2.0.5.0. Tried to create multiple hierarchies in time dimension . Ex Calendar Hierarchy and fiscal hierarchy . Created them using time wizard and them adding fiscal levels and recreate mapping to generate etl code