Output format in background is not same as Foreground

Dear All,
I am running a report in Background but output is not coming in desired format. Suppose output contains 35 columns ( while running the report in Foreground) but in doesn't show all the columns in background. Is there any SAP Standard settings by which we can set the output format as per our requirement while running the job in background.

Thanx Sourabh for your reply,
I have check the variant , it is correct. It's a common problem that end users are facing in my organization.
What I want that if standard output has width of 35 columns ( in foreground ), it must show all the columns in background also.

Similar Messages

CS6 Pshop - Alerts at startup; "All Readable Documents" not defaulting at opening; Format in file name not same as Format list when saving file

Just downloaded CS6 Design Standard. System - OS10.6.8 (about to upgrade to 10.8), iMac 27 i5Intel 4core 12GBram 2.66Ghz
As Pshop opens, I get three alerts...
1 - Could not load Enable Async I/O module because does not work with this version of Photoshop
2 - Could not load Multiprocessor Support module because does not work with this version of Photoshop
3 - Could not load FastCore Routines module because does not work with this version of Photoshop
Then asks if I want to be connected to internet or something like that. Then Pshop opens even before I click OK
None of these happened with CS5.5
I realize CS6 is 64bit. I have CS5.5 set at 32bit because of plugins.
Two issues I've noticed so far with CS6.
1 - As I open a document, the Enable selections drop down at bottom of window is not set on anything. I have to always select the All Readable Documents. Not the case in CS5.5 which was always default at All Readable Documents. Could not find anything in Prefs to this issue.
2 - When saving a document, whether RGB or CMYK, the drop down Format selections are not accurate. The first three or four do read correctly as correlating with the suffix (.jpg .tif etc) in the file name at top of window. But then the subsequent format selections below third or fourth one read as the one above it in the list.
eg: as RGB file: Saving through BMP indicates same in file name at top (.bmp). However, the next choice below that, Gif, still shows as .bmp in file name at top. And so on to bottom of list. Same with CMYK file.
Never saw this in CS5.5.
When I initially installed CS6, I noticed only item in the Plugins folder was Panels folder.... no other plugins. I thought this to be a download error of some sort and dragged basic plugins from 5.5 into 6 Plugins folder. Could this be the problem? Otherwise, I would have NO plugins in CS6
I have downloaded CS6 twice now thinking the first was corrupted. I used both download options on Adobe page - Akamai and standard
Same issues with both. One response stated this all to be a plugins problem. I have uninstalled "after market" plugins from both 5.5 & 6 SuperBladePro was the only one. Restarted CS6. Still same problems. Only items in Plugins are what came with program.

I owe an apology to the previous responder Chris C, to this issue. I misread his solution thinking he meant I needed to delete ONLY the "additional" plugins like SBPro. Which I did. But rereading, I see he meant ALL the plugins I dragged from 5.5 because the 6 plugins folder was empty.
I thought it was corrupted in download. So if you guys get points for solutions, be sure Chris gets a few since I responded saying it did not work.
In fact, after removing the 5.5 plugins from 6, everything is working fine.
Plus I didn't know the 6 plugin folder was for the "after markets" like SBPro which is good to know.
Also thanks for the fairly quick response. I'm typically dubious about forums as troubleshooting solutions.
Kinda like sending a message in a bottle out to sea. Never know when it's coming back.
Sometimes issues are urgent. Your response team has encouraged me greatly :-)
But still bummed that Chats do not support CS6 however.

Problem with Excel output format

Hi Guys,
I am creating a report in XML Publisher (not standalone). I am facing some problems could anyone please help me to figure out the issues.
Is it possible to have all three output format (PDF, HTML & EXCEL) exact (same aligned) only by creating a single RTF Template? I am facing the problem with Excel output format the output format of excel is taking excels cell formatting.
Example Numeric fields --> Right Aligned, text fields --> Left Aligned
One more issue with excel is -ve(negative) values are getting displayed in red and in brackets like ($13) (with red color).
Our client want excel output on priority.
Is there any limitation for excel output format of reports?
It is very urgent for us please help.
Any help would be highly appreciated.
Thanks,
Pragati
Edited by: user11237443 on Aug 27, 2009 1:22 AM

Hi Mahi,
Thanks for your response. But i could not understand how can we write wrapper program could you please give some light on this or provide some link it would be helpful for me:-)
I have read that blog for excel limitations but i have more question?
1) What about the negative values?
if any field is displaying negative amount then excel not displaying right value for that:(
2)How can we align header or data?
Do XMLP with EBS provide any solution for formatting in excel?
3) If for the alignment of numeric value we concatenate them with any special character then how can we perform calculation that field?
Here are so many formatting issues do we need to write any code in xml for that?
Please help.
Many Thanks,
Pragati

Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode.

Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode. What changes I have to made to work great in iOS 7 also.

I rewrote code for debugging purpose and tried to catch error using GetLastError();  method,
but it only printed 0. Below is code snippet; I think Create() throw an exception
and code goes to catch block.
LONG ConnectTS(CString strIP, UINT n_Port)
try{
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
// Exception Line
n_Err = GetLastError();
return NET_INIT;
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image
System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Output: -
ConnectTS is calling Create [is going to call]
Image System
0

Export an image from flash, the output color not same as original from flash

i try to create my logo from flash
i use export function in gif format.
the output color is not same as what i saw at flash.
may i know why? below is the screenshot.
flash
output

hi
i have export in png. but it have a black part at the background.
do you have idea?

Need help in formatting a number field with same precision for excel output

I am trying to get the same preciision for a field in RTF template when the output is in EXCEL
i.e. same number of digits after decimal. So, I would like to show 150 as 150.00 and 123.2 as 123.20 etc !! Is there a way to do it. the Built in formatting will not display 150.00 for 150 . but if i add $ symbol it will display. But i dont need $ syambol. please help.

I found this on one of the forum questions.
Excel dont preserve the trailing zeros.
try opening the xcel and type 5.0000 and tab out, it wont preserve the trailing zeros after decimal.
try finding out how to disable the option in excel. if you do that, you will see what you send out from the report.
But you can try to convert the number into a text by trying to append a space at the beginning. See if that would work.
Thanks
Swarna

PO Output For Communication Program is not Submitting in Background PO appr

Hi Gurus,
We are working on "PO Output For Communication" Program.We created a Standard Purchase Order and Approved it through the "E-Mail" option checked."PO Output For Communication" program was not submitted in the background.
From the workflow we found that it was stucked at PO new Communication Process.
As the value of column "po_output_format" is NULL in the "PO_SYSTEM_PARAMETERS" table it is not submitting in background.
Already in the front end
Purchasing responsibility->setup->organizations->purchasing options
under Documnet control we assigned Output format column as "PDF".
Will you please provide us your valuable solution as soon as possible.
Thanks in Advance,
RS

This Program "PO Output for Communication" does effects in other parts.
I mean that this program actually sends an email (or fax or print) along with the PO in PDF attachment or in the TEXT format.
This program does other part than the above mentioned point also.If yes then provide me the information in which other parts this program effects.I believe it is only the part you mentioned above.
PO Output for Communication
http://docs.oracle.com/cd/E18727_01/doc.121/e13410/T446883T443960.htm#srs.poxpopdf
PO Output for Communication Search
http://www.oracle.com/pls/ebs121/search?word=PO+Output+for+Communication&format=ranked&remark=quick_search
Thanks,
Hussein

Error When creating Broadcastings "Portal theme does not fit output format"

Hi All,
When i create a Broadcasting Settings i am getting an Error saying "Portal theme does not fit output format", and below is the detailed that we are getting,
"Diagnosis
You used separate portal themes to generate PDF or print formats (PS or PCL). The output format that you selected is not appropriate for the portal theme currently set.
System Response
The broadcast setting is not consistent and you cannot save or execute it.
Procedure
Change the output format or the portal theme correspondingly. (The portal theme is set to the first valid value for the current output format when you display the corresponding tab page).
Procedure for System Administration
Notification Number RSRD 640"
Can anyone help how to resolve this issue?
Regards,
Muruganand.K

Would you have chance to provide me the sollution...
We are facing the exactly the same error message
Thanks a lot in advance
Regards
Ivan

Different output format on pdf, same report same data same user Report 10g

Hi
I’ve recently came up with a very strange problem
I have the same report ( DevSuite 10g ) running on a win2003 server and without any obvious reason the output format changes from the original –correct one - ( the underlined text is not correct , font size is decreased , line spacing differs)
The report is executed with the same user, the same parameters and the same data...
Problem is solved only after a full server restart ( restarting only the report server, web cacle will not make any difference )
Once the report is formatted strangely we cannot run it correctly (reboot is needed)
Trace and log files shows nothing strange about the execution.
Can you please tell me how to start investigate or suggest a solution?
Thank you,
M

This is a wild guess, but it could be the result of there being no default printer. If you're using an in-process Reports Server, this runs by default under the LocalSystem operating system account. By default, this account does not have a default printer. Without a default printer, Reports may not format fonts correctly when producing PDF output.
For more information, see "Printing and Font Errors When Using In-process Server" in Appendix D (Troubleshooting OracleAS Reports Services) of Oracle Application Server Reports Services Publishing Reports to the Web 10g Release 2 (10.1.2). It (like Metalink note 272017.1) suggests changing the registry to set a default printer that the LocalSystem account can "see"). Metalink note 370150.1 offers a more drastic solution -- configuring the Reports Server to run under a different operating system account that does have a default printer.
Still, the theory that this "default printer" issue is the problem is not exactly consistent with the fact that your reports do work as expected at first, although there could be explanations for why the default printer is periodically changing (startup scripts, user intervention, etc.).
Hope this helps.

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

How to align output formatted and output text in the same line?

Hi All,
I want an output formatted label and a text on the same line,. I've surrounded these components wth a panel form layout and they automatically align one below the other. how do I kepe them in the same line?
Thanks.

Try as per the code snippet below:
<af:document title="TestPage.jspx" id="d1">
<af:messages id="m1" inline="true"/>
<af:form id="f1">
*<af:panelGroupLayout id="pgl1" layout="horizontal">*
*<af:outputFormatted value="outputFormatted1" id="of1"/>*
*<h:outputText value="outputText1" id="ot1"/>*
*</af:panelGroupLayout>*
</af:form>
</af:document>
Thanks,
Navaneeth

I just bought an iPad air and tried to purchase books in ibooks. After download and trying to open book I get the message "cannot open "storm front" it is formatted incorrectly, or is not a format that ibooks can open. I get the same message on my iPhone.

I just bought an iPad air and tried to purchase books in ibooks. After download and trying to open book I get the message "cannot open "storm front" it is formatted incorrectly, or is not a format that ibooks can open. I get the same message on my iPhone. What is up? Please help.

send problem to Apple.
http://www.apple.com/feedback/ipad.html
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
 Cheers, Tom

APEX BIP report query output format - not able to set with a variable

I have a Named Columns (RTF) report that is working great, but I can't control the output format with a variable. I can set the "Output Format" in the Report Query Attributes, but it doesn't work when I set the report output format to "Derive from item". No matter what the item contains, I always get PDF output. I can see the variable in my session, but it doesn't control the output format. I have tried using the values "xml", "XML", "rtf", and "RTF".
Any help would be appreciated...

My guess is that an exception is being thrown for some rows. Since you've stubbed out your catch phrase to do nothing you're not going to have any visibility into what exception was thrown. You need to put some kind of logging in the catch phrase to see
what is happening.

Anyone understand the purpose of Proxy render/output format?

So I've done a couple of projects with X now and am fairly happy with the proxy workflow:
1) Ingest, creating proxies, but no optimized - render format set to ProRes regular
2) Edit in proxy
3) In preferences, switch back to "Use original or optimized"
4) Tweak edit
5) Render and export
However, I'm still not understanding the thinking behind the render/output format (full-resolution proxy) when you are editing in proxy. It seems to me that it SHOULD be:
EITHER: When you're editing proxy, if you render/export, FCPX renders/outputs in proxy using the same low resolution as your proxy files. This would be great for early, quick samples for clients. No need to spend forever rendering full-res ProRes regular, or the pointless upsizing of pre-rendered lo-res proxies.
OR: Even while you're editing from proxies, background rendering is done in your full-quality format (i.e. 1080 ProRes regular). This would save you from re-rendering when you switch back over to original/optimized.
Ideally, there'd be a toggle to choose which of these you want. Even without a toggle, Apple should pick one of these it seems. The way it is now seems useless.
SUMMARY:
While editing in proxy, render/output should be either:
1) 720x540 ProRes Proxy
OR
2) 1920x1080 ProRes Regular
BUT NOT
3)1920x1080 ProRes Proxy
I was going to send an enhancement request about it, but figured I'd first see if anybody knows of a useful reason for it instead being this third, awkward format.
Thoughts?

I had hoped the summary would clear up the question. I guess not. Let's try this again:
QUESTION - Would other people like the output, when in proxy mode, to be a low-res ProRes Proxy file - the same size as the files that are created when you tell FCPX to make proxies of your original files?
DETAILS
- When you create proxies of your original files, they are a low-resolution of "something"x540 (in my case 720x540)
- If you output while in proxy, you get a proxy output file at 1920x1080 - this is 5.3 times as many pixels to render as 720x540.
- Assuming a linear relationship between number of pixels and render time, this means it would take over 5 times as long to render the current form of proxy output, as compared to what I'm asking for.
- I want a quickly-rendered format (like 720x540 Proxy) so I can quickly render/output, change things, re-render/output, sending multiple sample files to the client.
- Of course, the ability to mark in/out on the timeline and export just that section is also important here, but that's another post and has already been discussed.
- For further details, see my original post
As for my workflow, I don't need to work with either/or. I work in proxy (which, if you're doing more than straight cuts, allows better playback before rendering, no matter what computer you're using) until I'm ready for the final tweaks to graphics or the edit that actually rely on fine detail, and want to output in 1080 Prores regular, at which point I change the preference back to original/optimized, like I said right at the start of the first post. No mind reading necessary. I then tweak, render and output. I'm not sure you're understanding the purpose of a proxy workflow.

Best Output Format for Slide Show?

If I were to purchase Final Cut Studio...
What would be the best output format to use for a simple slideshow intended for Web deployment? In other words, which encoding method will provide the best compromise between file size and video quality? The slideshow is a series of simple static images with some fade transitions and Ken Burns effects. There is also a soundtrack for background music.
A 1.5 minute slideshow with soundtrack created using Adobe Flash is less than 2 MB in size (which is great for Web deployment), and it looks very good. If that same slideshow is exported from Flash to a QuickTime-compatible format, it balloons to over 20 MB!
So what I'd really like to know is, if something like Final Cut Pro were used to create that same slideshow, would I be able to produce a web-ready video that rivals the Flash version in size?
Thanks for any help and insight you can provide,
-Steve

Studio X wrote:
Quicktime is a file wrapper that can contain anyone of a number of codecs.
Yes, I understand that.
H.264 is the prefered version for web/apple TV delivery.
A 90s slideshow that was less than 2 MB as a SWF file became a 27 MB behemoth when exported using the H.264 codec. The exported file had the same frame rate and resolution (pixel dimensions) as the original Flash file. The audio was optimized as well. Why the dramatic difference? (I think I know why, but perhaps I'm missing something.)
That being said, Final Cut Pro is a video editing program and is a waste of money if all you are doing is simple slideshows.
Slideshows are not all I will be doing, but I will be doing them occasionally, and it's hard to justify purchasing Flash just to create slideshows that are optimized for the Web.
Have you tried iMovie then converting the output to either Flash or (if you have Quicktime Pro) converting to h.264 QT?
My tests indicate that anything but Flash format results in a monstrous file for a simple slideshow. I have a notion as to why this is, but I wanted to check to make sure that I'm not overlooking some way of creating smaller non-Flash files.
The bottom line is that Final Cut Studio will be far more useful and versatile for what I need to do, and I would be much more proficient with that software; but if I can't output video files that rival those of Flash in terms of quality and file size, then I might have to get a copy of Flash after all.
And yes, you can convert a QuickTime movie to flash, but it's just not the same in terms of file size as generating the same slideshow directly in Flash. I suspect this is because Flash is optimized for animation, whereas the QuickTime codecs are designed for video, and a simple slideshow is more of an animation than a video.
So my real question is (and I suspect the answer is no), is it possible using Final Cut Studio to generate a simple slideshow which rivals the output from Flash in terms of file size for a given resolution?
-Steve

Output format in background is not same as Foreground

Similar Messages

Maybe you are looking for