Output from dbms_output.put_line splits and move to next line

Hi All,
I am printing out a list using dbms_output.put_line its like
One or more of following Required Parameters are missing:
1. Primary Field
2. Structure Field
3. Structure
Table
4. List File Name
5. Query Directory
6. Query String
but I don't know why third option is splitting and moving to second line. any idea? its not that long even then.
thanks

set linesize 150
or set it as per your requirement

Similar Messages

Is immediate output from DBMS_OUTPUT.PUT_LINE possible

I have not been able to find a way to have my PUT_LINE's output to the user immediately. All of the data is buffered until the procedure is complete and the it is all dumped at the same time. I have some procedures that do several steps that can each take a few minutes to complete. I would like to be able to let the use know that there is progress being made. Is it possible to "flush" the output buffer?
Thanks in advance for your help,
Jim Marciniak

No. That is just the way DBMS_OUTPUT is. See http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:146412348066 for information.
What I have done to get around the DBMS_OUTPUT buffering is created an autonomous transaction stored procedure which writes rows to an output table that can be queried by other database sessions to see at what point in time a long running process is. Basically I do not use DBMS_OUTPUT.
Mike

HT1688 taking photos from i phone 4 and move to computer ?

How do you take photos from i phone 4 and move them toyouir computer?

Read http://support.apple.com/kb/ht4083

When i type my email, the text would go on and on and overflows. I mean to say it doesn't autmatically hit the right hand side wall and change to next line! I have to manually press enter and then next line starts. Started happening suddenly.pls help.

When i type my email, the text would go on and on and overflows. I mean to say it doesn't autmatically hit the right hand side wall and change to next line! I have to manually press enter and then next line starts. Started happening suddenly.pls help.

Does it happen when you reply to an email? If so, it might be that there's content in the original email (like an image or something similar) that overflows the window content, therefore the Mail app, when you hit the border, follows the content below instead of going on a new line. You might wanna try that.
Also: Please do not post the whole question in the question title.

Getting text from DBMS_OUTPUT.PUT_LINE to OCI application

Hi.
Does anyone know of a way to get data written by DBMS_OUTPUT.PUT_LINE into a C OCI application?
Thanks,
bLanark

Hi Mark,
Could you please let me know how to declare the respective bind variables in c.
I declared them as char ** and int. but I am getting an error.
Please post a oci example for dbms_output.get_lines(), If you already have one.
Thanks
Ravi

Firstly hello to all. I'm looking to create a vi that will take a single logged output from a thermocouple and monitor the temperature and produce a Boolean when the temperature has stabilised for a pre determined time say 1minuet.

Firstly hello to all. I’m looking to create a vi that will
take a single logged output from a thermocouple and monitor the temperature and
produce a Boolean when the temperature has stabilised for a pre determined time
say 1minuet. I have managed to find a couple of examples on the forum but one
will only run on V8.2 and I have V8, the other is for more than one channel
witch is fine I can always reduce this, but it was the timing feature I was
having difficulty with. I looking to monitor the temperature of a motor until
it has stabilised prior to testing and then to use this temperature as a
reference. Pleas forgive my ignorance if this is a very simple thing but I’ am
learning and really enjoying it. Thank you in advance for your answers.

Hi
Graham, thank you for you reply.
What I’ am trying to achieve is a vi I can use in a motor
testing setup, a part of this would be to warm the motor up until the exhaust
air temperature has stabilised, this takes approximately 10 minuets. I was
thinking of just letting the motor run for this time and leave it at this, but
some motors warm up quicker that others and. I am basically looking for a vi with
an adjustable temperature window of say ±5 C° in 1° increments, timing wise 1minuet
to 10min the adjustment is so I a can use this for another application. I tried
to adjust the code I found at the link below but had a little difficulty with
the timing. Thank you so much for your help it’s much appreciated.
sine.ni.com/niforum/niforum?forumDU=http://forums.ni.com/ni/board/message?board.id=170&message.id=251017&requireLogin=False

How do I take games from my iPhone 4s and move them over to the new iPod touch 5th generation?

For Christmas my son will be getting the iPod touch 5th generation. I currently have the iPhone 4s. Both equipped with iCloud. Is it possible for me to take the games from my iPhone and move them to the iPod? If so, how will I go about doing that? I currently have a macbook but need to upgrade my software so I can install iCloud to it.
Thanks.

One of the simplest methods: you will need to log in with your App store account and download them on the iPod. You will not be charged, since you already bought them.

Update and move to next record

Sorry if this is a simple question.
I have a form that links to an access database. The page
calls the fields and there is no problem.
I want to be able to have users check the database
information, and make any changes and then update and move to the
next record.
In the update button wizard it asks for a page to go to once
updated - I just need it to move forward.
Thanks for any help.

Hi,
I am not clear what you said. But I assume you mean to say:
Right after comming in your if statement you want to update the record first and then you need the validation?? If this is right then you have to move the validation just after the update statement and then print a message just before "END IF".
HTH
Ghulam Mustafa Butt

Pocket does not mark as read and move to next item

When I click on the Read Something tab of Pocket on Firefox, it continues to display the same article over and over. It does not mark it as read and move on to the next item on my list.

hello please directly contact the extension developers through the means provided at their homepage - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon. thank you...

Need to move to next line, if word is 1 or 2 letters

Hello All,
I'd like to move the words with 1 or 2 letters from end of the line to next line as per our internal requirements, could anyone suggest whether this can be achieved using GREP option or any other advise?
Thanks,
Praveen

Peter,
About the punctuation, what I mean is that, eg, it's better to finish a sentence at the end of the line rather than at the beginning of the next line.
I've modified the grep style:
\<.{0,2}[^:.,?!~j]\s.{0,2}
I've excluded the NJ that I'm using if I want to sometimes "relax the rule".
In the first case, the sentence will be cut after "as et" or after "ent a sum fuga."
In the second case, after "as et", after "ent" or after "a sum". If I insert a NJ after "ent".
Always be improved!

Simultanious audio output from both mini Displayport and Audio Output port?

Hey guys,
I was wondering if someone who already has audio+video output through the mini displayport set up can be so kind and answer the following questions for me:
Can audio be output simultaniously from 3.5mm audio port as well as the mini displayport? That is, if I output both video and audio to my reciever through the 2010 iMac's mini Diplayport, can i use the standard audio output port to provide line input for a further set of (active) speakers (analog would be fine)?
In the case both outputs CANNOT work simultaniously, which one will work if i have both plugged in? If the mini displayport has higher rank (or priority or what whatever i should call the one that works when both outputs are plugged in), and the reciever it is plugged into is switched off, will audio automatically switch to the standard audio port? Same question goes if the standard audio output port has higher rank/priority?
Many thanks in advance!
Just in case you are wondering why the heck i would wanna do that, here's some background:
I am planning on setting up my new 27' iMac on a 'work' desk in my bedroom, where i can comfortably sit and work on the computer as well as use the beautiful screen as my bedroom TV. Since i also wanna use my mac for all my living room multimedia needs (movies, tv shows, music, etc), i plan on running a long (15m) audio+video HDMI cable all the way up to my reciever in my living room. Furthermore, i am also planning on running a USB cable to the living room (through something of this sort: http://www.coolgear.com/images/171632pro.jpg) plugged in to a usb hub mainly for mouse/keyboard availability in the living room, but also for other things such as external hard drives and so on. The problem is that, apart from having my audio play in the living room, i also want to provide line input to my reference monitors that will be located at the iMac desk and i obviously much prefer i get the line input directly from the mac rather than running a third cable from reciever back to the speakers.
Message was edited by: Leeon

Anyone?
Is that so few people are using the new mini displayport for audio, or did i ask the wrong way?
Help will be greatly appriciated as i need this info in order to plan my purchases!

I want to remove my account from my old computer and move it to my new one?

I just purchased a new computer and need to move my creative cloud to my new computer. How do I do this?

navigate to Adobe: Creative, marketing, and document management solutions with your new pc and start downloading your programs.
if you want to remove your programs from your old computer, open your cc desktop app and sign out before uninstalling everything cc.

TS2972 how to take itunes downloads from one portable hardrive and move it on to another itunes

I have moved a lot of files from one portable HD to another now I want to take those files and upload their Icons to the new itunes so that I can click on them and play them on the new Itunes how do I do that?

You have activated the CC twice it has to be deactivated from one of the computer to activate it for the third time.
When you install it on the third computer or for the third time & when you to activate it, if it installed & activated already twice, there will be an option of deactivating it from the previous computers, please click on that.(To deactivate from preinstalled machine, Open any Adobe CC application > Help Menu > Signout.)
Next it will allow you to activate on your new machine,
Now you can go back to your first computer, log out & log back in of Desktopp CC App, launch any product, if there is any product to buy, in that prompt there will be an option to " license the software", please click on that & sign in.
It will reactivate the CC on the first machine.
You have already deactivated it from one machine, hence you can activate it on third computer.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html#deactivate-problem
In case the is still not resolved, please contact Adobe at
http://adobe.ly/yxj0t6
Regards,
Rajshree

When I open a drop down menu from the tool bar, and move the pointer down the list of choices, they become constantly "darkly highlighted" and the typefaces change to black making them unreadable.

As the pointer is moved down the list of choices in a drop down box, once the pointer passes each choice, that choice becomes constantly “darkly highlighted” and the type face of that choice turns black. So, as the pointer moves down the list of choices all of the choices become a block of darkly highlighted black text, making it impossible to read the choices which were passed over by the pointer.
It is though the HTML, JavaScript or Java attribute of ''*<code>onMouseover</code>'' is missing the attribute of ''*<code> onMouseout</code>'', thereby when the user moves the pointer off the boundaries of the element, that element retains the CSS given it by the''*<code> onMouseover</code>''

I should probably add that i am working in asp!

Advice needed to upgrade from A2 to A3 AND move machines simultaneously

Hi, I have A2 on my Macbook Air and have just bought a new iMac and upgrade to A3.
I'm trying to work out the cleanest way to upgrade and would be grateful for your advice please
1. Can I just install A3 on the iMac? Will the licensing model let me do that (ie how will it know I'm upgrading)
2. Assuming I can do this, will it be able to recognise and 'migrate' my A2 library if I transfer it across using my external drive?
3. Or do I have to install A2 on the iMac, then upgrade it to A3 which will then naturally migrate my A2 library.
Option 3 does not feel as 'clean' hence my question
Many thanks!

When you install the A3 upgrade version on the new iMac you will be asked for the serial number from the A2 full version.
As your library is quite small you could just copy it to the new machine (/Pictures directory usually) and then open it with A3. It will be converted to A3 format which could take some time. It is also non reversible so you should keep a copy of the A2 library on the old machine until you are happy with A3.
You certainly don't need to install A2 first on the new iMac before installing A3.
Stating the obvious here but make sure you have a backup (vault) of your library before doing anything!

Output from dbms_output.put_line splits and move to next line

Similar Messages

Maybe you are looking for