Output in ALV
Hi All
Is there anyway to get the back ground job spool output in ALV display...
Currently we execute some ALV report in front end and its giving result in ALV...
But if execute in the back ground the result spool is displayed in basic list... i dont want to download this list into spread sheet...
the result itself should be an ALV...
Is it possible....
Hi,
Try like this...
Declaration of local constants
CONSTANTS : LC_PAART LIKE SY-PAART VALUE 'X_65_132', " Paper Format
LC_LOCL TYPE SYPDEST VALUE 'LOCL'. " Destination
If print option is selected.
IF P_PRINT IS NOT INITIAL.
MOVE C_X TO V_PRINT.
ELSE.
CLEAR V_PRINT.
ENDIF.
Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
AUTHORITY = SPACE
IMMEDIATELY = V_PRINT
NEW_LIST_ID = C_X
NO_DIALOG = C_X
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = V_PRINT_PARMS
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
IF SY-SUBRC NE 0.
CLEAR : V_PRINT_PARMS.
ENDIF.
The printer destination has to be set up
IF V_PRINT_PARMS-PDEST = SPACE.
V_PRINT_PARMS-PDEST = LC_LOCL.
ENDIF.
Explicitly set line width, and output format so that
the PDF conversion comes out OK
V_PRINT_PARMS-LINSZ = C_LINSZ.
V_PRINT_PARMS-PAART = LC_PAART.
NEW-PAGE PRINT ON PARAMETERS V_PRINT_PARMS NO DIALOG.
perform sub_display_output.
NEW-PAGE PRINT OFF.
u can retrieve the spool number by the below code.
Declaration of local variables.
DATA:
LV_RQ2NAME LIKE TSP01-RQ2NAME.
CONCATENATE SY-REPID+0(8)
SY-UNAME+0(3)
INTO LV_RQ2NAME SEPARATED BY '_'.
Get the spool number.
SELECT * FROM TSP01 WHERE RQ2NAME = LV_RQ2NAME
ORDER BY RQCRETIME DESCENDING.
V_RQIDENT = TSP01-RQIDENT.
EXIT.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR V_RQIDENT.
ENDIF.
Regards,
Nagaraj
Similar Messages
-
How to get the output in ALV format
Hi All,
this is my program, in this i want to get the output in ALV, i hv created two containers and m able to get the ALV layout successfully but i am not able to fetch the correct data.
the output it is showing is some RFC value.
here we have used - abaplist, soli.
Please provide me the solution.
SELECT * FROM varid INTO CORRESPONDING FIELDS OF TABLE t_varid WHERE report in s_report.
LOOP AT t_varid .
SUBMIT (t_varid-report) USING SELECTION-SET t_varid-variant
EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
**************Old System Entry********
CALL FUNCTION 'Z_GET_DETAILS'
DESTINATION 'BWDCLNT900'
EXPORTING
report = t_varid-report
variant = t_varid-variant
TABLES
listtab = list_tab.
IF sy-subrc EQ 0.
CALL FUNCTION 'LIST_TO_TXT'
TABLES
listtxt = listtxt1
listobject = list_tab
EXCEPTIONS
empty_list = 1
list_index_invalid = 2.
ENDIF.
if p_flag eq 'X'.
clear p_flag.
write : / 'Program Name',
41 'Variant Name',
66 'Output Match'.
endif.
IF listtxt EQ listtxt1.
WRITE : / t_varid-report,
41 t_varid-variant,
66 icon_green_light AS ICON HOTSPOT.
ELSE.
WRITE : / t_varid-report,
41 t_varid-variant,
66 icon_red_light AS ICON HOTSPOT.
ENDIF.
CLEAR : listtab,list_tab,listtxt,listtxt1.
REFRESH : listtab[],list_tab[],listtxt[],listtxt1[].
ENDLOOP.
AT line-selection.
v_report = sy-lisel(40).
v_variant = sy-lisel+40(14).
call SCREEN 400.
module STATUS_0400 output.
SUBMIT (v_report) USING SELECTION-SET v_variant
EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CALL FUNCTION 'LIST_TO_TXT'
TABLES
listtxt = listtxt1
listobject = list_tab
EXCEPTIONS
empty_list = 1
list_index_invalid = 2.
**************Old System Entry********
CALL FUNCTION 'Z_GET_DETAILS'
DESTINATION 'BWDCLNT900'
EXPORTING
report = v_report
variant = v_variant
TABLES
listtab = list_tab.
CREATE OBJECT CCONT1
EXPORTING
CONTAINER_NAME = 'C1'.
CREATE OBJECT CCONT2
EXPORTING
CONTAINER_NAME = 'C2'.
CREATE OBJECT GRID1
EXPORTING
I_PARENT = CCONT1.
CREATE OBJECT GRID2
EXPORTING
I_PARENT = CCONT2.
CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'abaplist'
CHANGING
IT_OUTTAB = list_tab.
CALL METHOD GRID2->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'abaplist'
CHANGING
IT_OUTTAB = listtab.
SET PF-STATUS 'ZUTDEMO2'.
endmodule.
module USER_COMMAND_0400 input.
IF SY-UCOMM = 'EXIT'.
LEAVE PROGRAM.
ENDIF.
endmodule. " USER_COMMAND_0400 INPUTsolved
-
Output of ALV report as attachment in email
Dear all ,
I would like to send output of ALV report as attachment in email.
i already written code for this using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
I can able to send list output as HTM format. But I want to send ALV report output
As a attachment. How can I do this .please explain
Thanks in advance
Regards
ManoharHello,
U can sent like this.
Check this report
REPORT ZV_SEND_MAIL .
TABLES: EKKO.
PARAMETERS: P_EMAIL TYPE SOMLRECI1-RECEIVER
DEFAULT '[email protected]'.
TYPES: BEGIN OF T_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
END OF T_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF T_EKPO INITIAL SIZE 0,
WA_EKPO TYPE T_EKPO.
TYPES: BEGIN OF T_CHAREKPO,
EBELN(10) TYPE C,
EBELP(5) TYPE C,
AEDAT(8) TYPE C,
MATNR(18) TYPE C,
END OF T_CHAREKPO.
DATA: WA_CHAREKPO TYPE T_CHAREKPO.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
*START_OF_SELECTION
START-OF-SELECTION.
* Retrieve sample data from table ekpo
PERFORM DATA_RETRIEVAL.
* Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
*END-OF-SELECTION
END-OF-SELECTION.
* Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
* Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Example .xls documnet attachment'
'XLS'
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR
UP TO 10 ROWS
FROM EKPO
INTO TABLE IT_EKPO.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
* Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
* con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
* con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
If useful reward.
Vasanth -
How can i get the Icons in the output of ALV?
Hi,
I am trying to get the Icons in my report output using ALVs.
i am adding the following line
line_fieldcat-icon = 'ICON_GREEN_LIGHT'. in my field catalog for getting the respective Icon in the list. but the Icon is not getting displayed?
May i know whether the above specified line is correct or not? if not, how can i get the Icons in my output using ALVs?
Thanks and regards,
Ramesh.Hi,
take idea from this code :
INCLUDE ICONs.
WRITE : / icon_green_light AS ICON.
WRITE : / icon_red_light AS ICON.
write : / icon_yellow_light AS ICON.
OR
add code as per steps below in your ALV report :
<b>FIRST :</b>
INCLUDE ICONs.
<b>Second :</b> in your internal table add :
icon type icon-id,
<b>Third :</b>
add this value in icon field for green light.
itab-icon = '@08@'.
append itab.
<b>Fourth :</b> display
is_fieldcat-tabname = 'IT_FINAL'.
is_fieldcat-fieldname = 'ICON'.
is_fieldcat-col_pos = '1'.
is_fieldcat-outputlen = '12'.
is_fieldcat-seltext_l = 'ICON'.
APPEND is_fieldcat TO it_fieldcat.
CLEAR is_fieldcat.
Reward points, if helpful,
Sandeep Kaushik
Message was edited by:
Sandeep Kaushik
null -
Want to export output of alv grid to excel automatically
hi friends.............
i want to export output of alv grid without displaying on screen to excel file .......................
how i m able to do it ..............................
in the same way as after alv grid display click on LOCAL FILE-> SPREADSHEET-> ........................
plz rply me soon if anyone of u know abt that.................
thanks allot.............actually in output through 'REUSE_ALV_GRID_DISPLAY' some title is also there through TOP_OF_PAGE how can download it also and data table in excel sheet ...................
actually when an alv output is displayed then some title data is also displayed in alv grid then we can download it by clicking on icon 'local file--> spreadsheet........and soon ' ..........
my req. is download it automatically without doing this process and without displaying it on screen......... it means i want to interrupt to alv grid output to only download without displaying it in output screen............
if u clear my question then reply me............. -
Addiing additional data in header of excel output of alv excel dowload.
Hi Experts,
I want to set(print) some additional data in header(with table header) of excel output of alv standard functionality(Export to Microsoft Excel) in webdynpro abap.
any suggesions...
Reg,
Rajesh.OLE is the solution but not very performance oriented. Search for details in SDN
-
Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV
Hi All,
I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction.
I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog.
I need these fields output only for ALV display only.
Please let me know which enhancement i need to write code to enhance the output with these filed values added to the ALV internal table
Thanks in Advance
ArunHi All,
I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
Please let me know how to achieve this scenario
Thanks
Arun -
How to get the record selected in ztable based record in the output of alv
Hi All,
I have developed a report, it is displaying the output in ALV format.The list contained some 20 fields along with MATERIAL and BATCH. I have provided menu bar as extras -> ztable(it also contained MATERIAL and BATCH). But I have some issue when I select any record in the output then go to
path extras -> ztable, it has to select the record in ztable based MATERIAL and BATCH which i have selected in the output, then can you please provide solution for the above problem.
Thanks in advanceHi Dolly,
you can do this by,
data: index_rows type lvc_t_row,
index like line of index_rows.
* Get Selected rows from alv grid
clear index_rows. refresh index_rows.
"When you choose extras->ztable
call method alv_grid->get_selected_rows
importing
et_index_rows = index_rows.
* Now delete those rows from the ALV grid
loop at index_rows into index.
read table itab index index-index. "Lets say itab is the table you are displaying
if sy-subrc = 0.
perform bdc_sm30. "do simple bdc for sm30 with tab name and selected values
endif.
endloop.
Regards,
Manoj Kumar P
Edited by: Manoj Kumar on Feb 23, 2009 2:49 PM -
Selecting a row in the output of alv grid
hi,
how do i select a row in the output of alv grid?plz help...
regards,
sheeba.Hi,
Please refer the code below:
*& Report ZDEMO_ALVGRID_SELROW *
*& Example of a simple ALV Grid Report *
*& The basic ALV grid, Enhanced to display capture each row a user has *
*& selected *
REPORT zdemo_alvgrid_selrow .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
SEl, "stores which row user has selected
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-box_fieldname = 'SEL'.
"set field name to store row selection
gd_layout-edit = 'X'. "makes whole ALV table editable
gd_layout-zebra = 'X'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into corresponding fields of table it_ekko.
endform. " DATA_RETRIEVAL
* FORM USER_COMMAND *
* --> R_UCOMM *
* --> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
WHEN '&IC1'.
* Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
* Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
* Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
* Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&DATA_SAVE'. "user presses SAVE
loop at it_ekko into wa_ekko.
if wa_ekko-sel EQ 'X'.
* Process records that have been selected
endif.
endloop.
ENDCASE.
ENDFORM.
Thanks,
Sriram Ponna. -
Can we download output of alv tree ?
hi all,
i have a requirement to download the output of alv tree when it is collapsed (detailed). Can we download that ? i am using cl_gui_alv_tree class.
plz let me know asap.
regards
raghavStandard Control does not give that Option . SO another option is to go to Print preview of the Entire Hierarchy view , then click System -> list -> Save -> local file and save it as spreadsheet . This wa entire data gets downloaded in excel in tree format .
Thanks ,
-Kaustubha Tavildar -
SAP Standard reports Output in ALV
Hi Folks,
I have a report MKVZ which is showing the output in a LIST DISPLAY.Is there anyway that I can see this SAP Standard report output in ALV(not by Coding).
Thanks,
K.Kiran.No Dear you can't see this report in ALV, as this report is genrated in List view using write statements.
what best you can do is, u can download the final internal table into excel file or
you have to change by copying the proogram.
reward if useful
Amit Singla -
Wan to add push button in the output of ALV Grid display.
Hi Friends,
I wan to add a Push button in the output of ALV GRID display with STANDARD ikons.
How to copy standard ikons of GRID output.
How to apply the copied status into my code.
Regards,
VijiHi,
Goto SE41, create a pf-status for your alv report program.
On the next screen, click menu EXTRAS --> click option ADJUST TEMPLATES and select radiobutton LIST VIEWER --> you will get all standard buttons of alv in the pf-status.
Delete the unwanted buttons and also you can add new buttons if reqd.
Activate pf-status --> and apply in alv program.
Now to apply this pf-status in your alv report follow code:-
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_rep_id " report id
i_callback_pf_status_set = 'PF' " for PF-STATUS
i_callback_user_command = 'USER_COMMAND' " for User-Command
is_layout = wa_layout " for layout
it_fieldcat = it_field " field catalog
it_sort = it_sort " sort info
TABLES
t_outtab = it_final " internal table
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form pf
* SUB-ROUTINE PF IS USED TO SET THE PF-STATUS OF THE SCREEN
* ON WHICH THE ALV GRID IS DISPLAYED
* -->RT_EXTAB
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_STAT'. "<--pass pf-status name here
ENDFORM. "pf
*& Form USER_COMMAND
* SUB-ROUTINE USER_COMMAND IS USED TO HANDLE THE USER ACTION
* AND EXECUTE THE APPROPIATE CODE
* -->LV_OKCODE used to capture the function code
* of the user-defined push-buttons
* -->L_SELFIELD text
FORM user_command USING lv_okcode LIKE sy-ucomm l_selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE lv_okcode.
WHEN '<function_code>'. "<--to handle user actions
ENDCASE.
ENDFORM. "USER_COMMAND
Hope this helps you.
Regards,
Tarun -
HOW TO KEEP PUSHBUTTON IN OUTPUT SCREEN(ALV)
HOW TO KEEP PUSHBUTTON IN OUTPUT SCREEN ( ALV FORMAT)
Hi,
At selection screen use this below code:
Eg:
*SELECTION-SCREEN FUNCTION KEY 1. "Adds button to application toolbar
Declaration of sel screen buttons
selection-screen begin of line.
selection-screen pushbutton (20) w_button user-command but1.
selection-screen pushbutton (25) w_but2 user-command but2.
selection-screen end of line.
Madhu
Pls reward me if it is useful -
Logic For Subtracting A Given Output In ALV Report
Hi,
I am working on a report in which i am using ALV Concept and there a problem arise i.e. in ALV Report output which always subtotals having values in addition only and i want to know is there any way through which subtraction can also be performed within the output of a ALV Report.
Please provide some guidelines for it.
Regards,
Rickky NVHi,
Thanks to both of you for your value able response. Actually, i am working on customer aging analysis report in which there are 2 columns i.e. debit and credit in which these both values are stored in 2 separate lines and i have to display the difference of them in the 3rd column and facing the problem.
Is it possible to display the required data of it in 3rd column of it?
Regards,
Ricky -
How to make checkbox field inactive in the output of ALV report.
Dear All,
I am having one ALV report in whose output there are checkboxes against each record. Example: the output columns of my ALV report are:
Checkbox, Sales Document No, Billing Document No.
Now, my requirement is that if for the Sales Document No there exists any Billing Document No in the output then the Checkbox should be inactive but if the Billing document coloumn is empty for a particular Sales Document No then only the Checkbox field should become active.
Kindly guide me on how to make this checkbox field inactive.
Waiting for your reply.
Warm Regards,
N.JainHello,
Follow the below steps:
1.Define as--> GS_STATUS TYPE SLIS_STATUS,
2.check layout check box fieldname is not initial.
then set the status according to your logical conditions
GS_STATUS-FLG_CHECKBOXES_ACTIVE = 'X'
Hope this would help you.
Let me know your feedback.
Regards,
Raju
Maybe you are looking for
-
Absolute WORST customer support - lied to and ignored
I have never received worse customer support from a company. About a month ago I downloaded the trial for Adobe Media Server 5 as we had been running FCS 1.5 for a long time and decided it was time to update. The trial worked well for my custom appli
-
Why is the upgrade to iOS 7.0.4 (1.31 GB) taking ELEVEN HOURS?
Why is the upgrade to iOS 7.0.4 (1.31 GB) taking ELEVEN HOURS? After 2 full hours I have downloaded 240 MB! I realize my Internet speed of 2.5 Mbit/sec is not blistering, but it is the fastest available to me at my rural location. It easily manages
-
How to use 2 ipods on 1 itunes?
A question asked many times me thinks, but I have to ask. How do I go about having 2 ipods (1 touch and 1 5th gen) with different music/vids on them on 1 itunes? If I connect my 5th gen to the mac I dont want all the stuff that is on my touch, I want
-
Greetings, I've had a couple button issues causing problems for my online presentations. First one, during a quiz, when an answer is entered the "Correct" box appears when clicking "submite and then disappears immediately. Instead of being able to cl
-
Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server
Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server.Can anyone help on this. Thanks in advance.