Output not triggered during SAVE from Shipment

Hi,
We have a custom Idoc triggering from the Shipment. The output shows up in the output screen (as yellow) and it is set to trigger 'immediate - 4'. But when I save, it does not issue an output. No errors, nothing just does not trigger at all. If I go into the shipment again in change mode and then save it, then it triggers the output.
The output is an custom idoc, transmission medium 6, attached program RSNASTED and the form routine is EDI_PROCESSING.
I tried debugging the program (in update debug mode)...found that an internal variable XNAST-UPDAT is set to 'D' (a GERMAN comment in code says "no longer found or changed key"). The only key change I can think of is the shipment number initially with $0001 and then changes to the actual shipment #. But this should happen even for other outputs..for eg, BoL printout. It does trigger without a problem and for this this indicator is not set to 'D'.
Any thoughts ?
Regards,
Anand

Hi Anand,
Have u resolved this issue... bcoz i m facing the same issue..
Can u plz tell me how u resolved it..
Regards,
Siva Kumar S.

Similar Messages

  • BBP_PO_SEND_XML - Not triggered during the creation of PO

    Hi All,
    We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
    Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
    Thanks,
    Phani.

    Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.

  • PO change output not triggered after deletion of line item

    Hello SAP experts,
    I have one issue with PO output
    I have created PO with output type & we are outputing through ME9F( 3- Send with application own transaction)
    Below is the sequence,
    1.PO created & outputed thru ME9F
    2.Now ,i added the line item in the PO,Output triggred but not processed.
    3.I deleted the line item immedietely,Output not triggered.
    (My question is Why the output is not tiggered?)
    4.I outputed it through ME9F,vendor will receive only 1st output & never get the 2nd o/p for the deletion of item.
    I am clear that after processsing the 1st output,then only i can process the 2nd.
    But in business point of view,this scene created the problem.
    Please provide your valuable input.

    Hi,
    In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
    Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
    Now your Output will be triggered with a change indicator and you can process it using ME9F.
    Regards
    Chandra Shekhar

  • Shipment output not triggered...

    Hi, I tried to find solution for this in forum, but could not... In my case,
    When user creates a shipment using VT01N/VT02N and clicks the planning button and then clicks on save button, I need a custom idoc to be sent to SAP PI.
    I tested sending this idoc from WE19 to PI and it is working fine...
    But the output type is not triggering from VT01N/VT02N. I am not sure which of the config setting is wrong. Can someone point out which setting is missing/may have issues.
    Also, I did an output determination analysis and it shows me a green entry which means it chose the custom output type and related access sequence. But then why is idoc not generated. I have put a break point in the custom function module in which I populate the custom idoc segment.
    Please help to fill in the gaps ...
    1. I checked in NACE, under V7 - Transportation, there is my custom output type ZEDI, with partner functions set as
    EDI - LS - Logical system
    EDI - CR - Carrier
    I am not sure if this is correct !!
    Processing routine points to RSNASTED, EDI_PROCESSING.
    I checked the condition records tab...
    The shipment type ZOUT is configured there, with one entry
    ZOUT - DESCP - LS - logical system name i.e. PI system name - medium as 6.Date/Time as 3.
    Again I am not sure if this is failing !!
    Procedure tab does not have any entry related to this.
    Access sequence also does not have any entry.
    The partner profile (WE20) entries as as follows;
    for the PI partner, Partner role is LS, message type is SHPMNT, under outbound params.When I double click that I see receiver port set, basic type has custo idoc name, Message control tab has V7 - ZEDI - process code ZSSS. And that process code is bound to the custom function module where I fill the idoc segment.
    But finally I do not see any idoc generated !!
    Please advise.

    Hi ,
    1. Does the condition record is automatically pulling up in the Vt02n transaction or no ?
    2. Try first checking the IDOC trigger with the Standard Process Code SD11 to see if the Output Determination is working correct.  Once u know that part then the partner profile setup to  check with  the Process Code ZSSS, whether the output is being determined or not.  Based on the same atleast u can narrow down the root cause.
    Are u working on this Interface for a Advance Shipment notification to the customer ?
    Cheers
    Balaji

  • Output not triggered....

    Hi, I tried to find solution for this in forum, but could not... In my case,
    When user creates a shipment using VT01N/VT02N and clicks the planning button and then clicks on save button, I need a custom idoc to be sent to SAP PI.
    I tested sending this idoc from WE19 to PI and it is working fine...
    But the output type is not triggering from VT01N/VT02N. I am not sure which of the config setting is wrong. Can someone point out which setting is missing/may have issues.
    Also, I did an output determination analysis and it shows me a green entry which means it chose the custom output type and related access sequence. But then why is idoc not generated. I have put a break point in the custom function module in which I populate the custom idoc segment.
    Please help to fill in the gaps ...
    1. I checked in NACE, under V7 - Transportation, there is my custom output type ZEDI, with partner functions set as
    EDI - LS - Logical system
    EDI - CR - Carrier
    I am not sure if this is correct !!
    Processing routine points to RSNASTED, EDI_PROCESSING.
    I checked the condition records tab...
    The shipment type ZOUT is configured there, with one entry
    ZOUT - DESCP - LS - logical system name i.e. PI system name - medium as 6.Date/Time as 3.
    Again I am not sure if this is failing !!
    Procedure tab does not have any entry related to this.
    Access sequence also does not have any entry.
    The partner profile (WE20) entries as as follows;
    for the PI partner, Partner role is LS, message type is SHPMNT, under outbound params.When I double click that I see receiver port set, basic type has custo idoc name, Message control tab has V7 - ZEDI - process code ZSSS. And that process code is bound to the custom function module where I fill the idoc segment.
    But finally I do not see any idoc generated !!
    Please advise.

    posted this question in ERP forum.

  • Condition dependent output not triggering

    Hi,
    We created a new PO action definition. Processing time is 4 Processing when saving document. The processing time not permitted is 00XX0 Selection report. The schedule automatically flag is checked. In the action determination section, the determination technology is set at "Determination using conditions that can be transported" and the rule type is set at "Workflow conditions". This action definition has one processing type "Smart forms print".
    A condition dependent output is configured for the action definition indicated above. This condition has the default settings from action definition checked. In the processing detail tab we have a specific printer we want to use. In the schedule condition this is what I configured:
    (  " --- Vendor medium ---
         &EC Purchase Order.Sending Medium& = PRN
      ) " --- Vendor medium ---
      and    (  " --- OA address number ---
         &EC Purchase Order.Vendor Address.Address Number& = 12642
      ) " --- OA address number ---
    We have a vendor with additional ordering addresses. I got the additional address number from table BUT020. Vendor has medium "PRN" in table BBP_SENDMEDIUM.
    When I create PO using the vendor and selecting the additional address (# 12642), the immediate output to the specified printer is not triggered. I mean the condition dependet output configured is not being triggered.
    Please, can anyone give me some tips about what I am doing wrong.
    Thanks and regards, Jose Oyon.

    Hi, If you want to work with Condition-Dependent PO Output, you have
    to set the conditions for output in Define action for Purchase order
    output. Under Action determination and Action summarization you can
    choose from different option.  Also clean-up customizing inconsistencies using transaction SPPFCADM and adjust to determination technology  "Determination Using Conditions" to retest. Check note 564826 which may be helpful.
    Best Regards
    Lauren

  • Workflow not triggered for PR from MRP run

    Hi,
    I have PR Release strategy workflow configured, working well when i try to create PR manually, triggers workflow.
    PR's created thorugh MRP run, triggers release strategy but not workflow.
    I checked the event trace 'releasestepcreated' event not triggered through MRP run.
    Please respond ASAP.
    Your inputs will be highly appreciated.

    The response i got from SAP.
    Please see note 67866 Purchase req. from materials planning -> no workflow
    Thanks,
    Indira

  • BTE 1830 not triggered during F110 proposal run

    Hi,
    I am implementing 1830 (PAYMENT PROGRAM: Edit Group)  to trigger at the time of proposal run in F110. But it's not triggering at the proposal run in F110.
    I have assigned 1830 custom function module to BTE 1830 FIBF > Setting > Process Modules > Of a Customer.
    Let me know how to troubleshoot this issue.
    Thanks,
    Ron.

    I think you are on the right track.
    I figured out the process myself.
    In my case I assigned the custom FM to the BTE process 1830 like you did,
    and tried to test it in a different Dev client.
    But the assignment is stored in a Customizing transport which should be copied to the other Dev client by SCC1.
    Long version short: did you check in your testing client if the assignment is visible in FIBF transaction?
    Jeroen

  • Output type not triggered during Delivery Order - pls help

    Hi,
    Need some help.
    I'm trying to setup output determination for delivery. It's a new output type for delivery.
    There are some checking that I want to build in to determine whether the output type is to be generated. Therefore I have to make sure of requirement (routine). However, after putting in the configuration, coding the requirement and creating the condition record, the output type still cannot be generated. When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
    Any idea what could be wrong? 
    This is what I've done :
    1. Creating condition tables
    2. Creating access sequence & assigning the condition tables to the access sequence
    3. In the access sequence, assign requirement number 999. The "Exclusive" indicator is not ticked.
    4. Ensure that the requirement 999 is activated in tcode VOFM.
    5. Create output type, assign the access sequence to the condition type.
    6. Assign the condition type to the output determination procedure. Make sure the "Manual" checkbox is not ticked.
    7. Assign the delivery type to the output determination procedure.
    8. Create condition record. 
        Note : when i created the condition record, I am not able to assign a Partner Function (for eg. SH) to the record. However in the config for the output type I've already configured for that Partner Function "SH" to be allowed for that output type.
    Appreciate suggestions & feedback.
    Thanks
    Rgds,
    L

    Hi,
    When I go to VL02N to check the Output Determination Analysis it says the requirement " " is not fulfilled. It's not even calling out the requirement number that I assigned in the access sequence.
    This is because in requirement you put certain conditions should be fulfill then out put should trigered,
    Example - if you maintained condition in requirement that user must maintain loading point
    Now when creating delivery user not maintained loading point then output will not trigered, so user must maintain that then only it will trigered output.
    Same problem just now solved, check which data maintenance conditions in routine and try to maintain that.
    Kapil

  • Break points are not triggering in RFC from portal application

    Helllo,
    I am running Biller Direct application from portal, which is triggering a standard SAP RFC FM back end, am trying to debug my execution from portal, for this i put the External Break point, Session break-poiint at the beginning of this SAP RFC FM, but, its not stoppping at ll, here the user is a Web user, not dialog user.
    How can i stop my execution in this SAP RFC FM to check how the structures are populated?
    Thank you

    Hi Raju,
    Please try the below way and check if it works.
    Open the RFC in R/3 i.e.
    SE37 -> give FM NAME -> DISPLAY.
    Click on UTILITIES -> SETTINGS -> CLICK THE TAB debugging.
    In the screen against the field users : give the value 'WEBLOGIN'.
    Uncheck the FLAG 'IP MATCHING'.
    And at the bottom check the check box against the field
    'Session Break Point Activate Immediately'.
    Save these settings.
    Then go to the line at which you want to debug the code and put an external break point over there.
    But, please take care of one thing as we are giving it as a WEBLOGIN, when ever some logs in, it will reach the brteak point and stop there. We have to click F8 to continue. Or else, the portal will be hanged for them.
    Thanks & regards,
    Y Gautham

  • PO output not triggering

    Hi ,
    I have created a Purchase Order and the Output type is not getting triggered.
    The Condition record is maintained for document  type and partner role with PArtner value field left blank.
    The Partner role is not there in PO, so the output type is not getting triggered.
    I enterd manually partner role in Header of PO, PArtners tab.then output was triggerd,
    So, the output is looking for partner role.
    So, to avoid manually etering everytime in PO, how the solution can be approcahed.
    Please help

    First check is there  more then one  Key combination.
    Go in PO> Message->select the output line item--->Goto --> Determine analysis (Here you could find out which condition record is pulling automatically)
    Use only one key combination for your desire output.
    Please go through table B027 will help little to extract the list.

  • I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

    I have problems with uploading images to my internet printing company when  the images have been manipulated through CS6 and  i have saved images as jpeg  the printer company tell me they are not j peg,
    but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

    Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
    There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
    Take your pick.

  • Hard drive not appearing during restore from Time Machine?

    While attempting to restore Time Machine from an external drive to my new MacBook Pro, the hard drive doesn't appear in the graphic.  A second external drive I have does appear, but not the Macintosh HD.  Suggestions?

    Howdy dlayne40,
    If your hard drive is not showing in Time Machine, check it with Disk Utility.
    OS X: If you can't back up or restore with Time Machine - Apple Support
    Check your Drives
    Use Disk Utility to check your startup disk and any external drives you are using for backup.
    Repair any issues and try again.
    Best,
    Nubz

  • EDI Output not triggerring

    Hi,
    I have created an output ZINL in NACE tcode to generate an IDoc assigned partner type LS. This output should be automatically assigned when i change any invoice list (VF22). Parnter name is ZLSPAR. Logical system ZLSPAR was created first in BD54 and then it was created as a LS partner type in WE20.
    The condition record i created in VF31 is of the key combination Sales area+Bill doc type. The bill doc type is also assigned with LS partner and respective partner name.
    There is one VOFM requirement created for the output, which is passed successfully. Inspite of this, ZINL output is not getting automatically assigned in VF22 tcode.
    Is there anything else i need to be doing?
    Thanks
    Vish

    Hi,
      check the artilce for the configurations to be done in EDI.
      http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d4ce58df-0901-0010-a4be-9ae9eda61107
      This is related to PO and Not Invoices though but could come in useful.
    cheers
    Aveek

  • Keywords/Tags not shown during import from disk

    I am trying to populate my LR3 libray with all the photos on my HD by importing them. Many have been tagged from Elements 8. I have found that when first rendering the photos in the Library, the keywards and tag icon are not shown prior to actually hitting the Import button and adding them to LR3. It looks like I can type new kewords and have them attached using Add on Import, but it would be much more useful in my workflow to have the keywords that already exist be shown so I know what to add or change. Is there any way around this?
    Thanks,
    Jim

    Your best option is to upgrade the PSE8 catalog to a Lightroom 3 catalog.
    http://help.adobe.com/en_US/Lightroom/3.0/Using/WS217DEA0F-2A78-4445-89CB-4CED1AFA450E.htm l

Maybe you are looking for