Output type config -- Sales Order

Hi All,
We have a requirement where we need to trigger a custom output type for the condition "Sales Org./ Div./Doc. type/Plant (Item)". This should be triggered at the header level. The settings have been done. Now while creating an SO, the output type is getting triggered automatically only when I check for the output at item level and then come back to header level. In case if I don't check the output at item level, the output type at the header is not getting triggered automatically.
Please let me know of any work around to get this done.
Thanks,
Raj.

Hi Mohit,
Go to [VA02], using the standard toolbar select Extras -> Output -> Header / Item -> Edit and go to the Output Screen. Again using the standard toolbar select Goto -> Determin Analysis. Now select your output condition type and see what could be the reason for why the output type has not been picked.
Regards
NP

Similar Messages

Add an output type in sales order header

Hi Dear Experts,
I try to find a way to add an output type in sales order header after the order was created.
I also need the output to be sent immediately to the FAX.
Do you know any BAPI or Function that can help me or have any idea how it can be done?
Thanks and best regards,
Sagit.

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

Error status of output type in sales order (va02)

hi,
I have created a output type in salse order for Idoc generation.
My problem when i create a order and if it's credit limit excced then it show me red status of out put type, and no idoc generated.
If credit limit is not excced than it show green status.
can anyone help me how to make it in green or yellow status even if credit limit exceeds.
how to remove this check.
can this be solved by configuration ???
<REMOVED BY MODERATOR>
Thanks in adance,
Edited by: Alvaro Tejada Galindo on May 23, 2008 6:57 PM

Hi Mohit,
Go to [VA02], using the standard toolbar select Extras -> Output -> Header / Item -> Edit and go to the Output Screen. Again using the standard toolbar select Goto -> Determin Analysis. Now select your output condition type and see what could be the reason for why the output type has not been picked.
Regards
NP

Triggering output type when sales order is saved

Hello all,
            I have a small question. Whenever I create a drop ship sales order it triggers a custom output type and prints the form by default even though this output type hasnt been saved in the sales order messages. Similarly from a drop ship PO when it is created with reference to the drop ship order and a requisition it tries to call this cusotm output type and prints the form.
Please advice how to find the settings and make it not print this form.
Thanks in advance.

Hello,
         There are few other custom output types configured for a sales order. I wonder why it picks this particular output type and prints the form.
         If I uncheck 'Print Immediately' then would it stop from just printing or even calling the form too.
          Please advice if there might be any other config which tells to call this particular form whenever a drop ship sales order is created.

OUTPUT TYPES FOR SALE ORDER(VA01)

Hi All,
When i create a sale order, the data can be downloaded thru output type BA00 & standard program RSNASTED into SAPScript, but i wanted to download it to internal table. Can u please tell me the changes to be made after copying the standard program into Z... Program.

Hello Rafi,
Better U debug the report. Since the data will be in the internal table, if it is downloaded to the Script. So u no need to copy and make the changes.
Vasanth

How to add a new output type in sales order header via ABAP program

Hi All,
I have to add new output type (ex Z001) in sales order header via an ABAP program. please let me know how to do this.
Thank you all in advance.

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

Output Type in Sales Order

Hi All.. Output type is not automatically selecting/ coming in sales order.. Condition record has been maintained in VV11 and I have also checked the configuration which seems okay to me.. Pls suggest where is the problem?
thanks in advance

Hi Mohit,
Go to [VA02], using the standard toolbar select Extras -> Output -> Header / Item -> Edit and go to the Output Screen. Again using the standard toolbar select Goto -> Determin Analysis. Now select your output condition type and see what could be the reason for why the output type has not been picked.
Regards
NP

Output Type on Sales Order delete

Is it possible to activate Output Type, sending iDoc, on Sales Order deletion?
On Sales Order create, change it works well, but not on delete.

hi,
this is Possible.
but it is not possible through Message Control ..
you need to write custom program..
that program read deletion data from CDHDR and CDPOS table and append data to idoc and post.
Prabhudas

FM to update output type in sales order

Hi folks,
my problem it's the following, if you update a sales order in tcode va02 and I change the status, automatically it's assigned the output type to this status, that is working fine, I'm maintaining a report that it changes the status to the sales order but kind of the output type is not maintained, somebody knows a FM or Bapi to update the output type?
Many thanks.

Please check the BAPI BAPI_SALESORDER_CHANGE
*" CONDITIONS_IN STRUCTURE BAPICOND OPTIONAL
COND_TYPE
Kanagaraja L

User exist for controlling the OutPut type in sales order

Hi
Is their any exist which controls the output type based on header data of the order? VA01/02.
Best regards
Satish Kumar K

Hi,
IN the VOFM routine you can use the structure KOMKBV1 which will be populated with the sales org (VKORG), division (SPART) and order type (AUART).
Example
SY-SUBRC = 4.
IF KOMKBV1-VKORG = '0001' AND
KOMKBV1-SPART = '12' AND
KOMKBV1-AUART = 'ZXXX'.
SET THE return code to 0 to propose the output type.
SY-SUBRC = 0.
ENDIF.
Hope this helps..
Thanks,
Naren

Default Output Type for Sales Order Header

Hi Guru
I created 2 output types for hardcopy printout and for mail.
I want both should be selected as default when a sales order is created. (using NACE)
Output will be manually from VA02 -> issue output to. Here I must get 2 output types.
As of now, this is manual process.
Please help.
sunil Kolambkar.

Hi Sunil,
For this you need to maintain condition record for output type. for the sales order type, [V V11].
Do the output determination in the same way as Pricing procedure determination.
OUTPUT DETERMINATION:
SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents & output det for billing documents.
Create Condition Table: select the field Sales Doc Type from field catalog & Save
Maintain Access Sequence: 4-digits code & description.
Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type.
Maintain Output Types:
AF00: Inquiry
AN00: Quotation
BA00: Order Confirmation
LD00: Delivery
Select BA00 & Copy & Rename. Give the same 4-digit code as given to acc seq.
You Can Maintain:
Languages of Output
Partners (to whom we want to send output)
Print Program- print specification
Sap Script- layout
Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions.
Maintain Output Determination Procedure: V10000 (Standard Procedure). Go to new entries & create your own 6-digit code with descp. Select the procedure & go to Control Data. Here mention the output type i.e. cond type & leave requirement and manual only columns as blank.
Determination Rule: link the 6-digit procedure code to doc types.
Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately.
Once you press enter you will come across 2 key combinations:
Sales organisation/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. {It contains: Sales Orgn, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.}
Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language.
Hope this would be helpful.
Regds,
Rupali

Output type config error:No communication data has been defined for transmi

Hi Gurus,
i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
green Object 0000000133
green Output type: UK Sales Order
green Processing log for program RSNASTED routine ALE_PROCESSING
   RED   No partner profiles (message control) maintained
I tried adding communication data in VV11 but i get the below error.
No communication data has been defined for transmission medium A
Message no. VK603.
I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
V1 ZORD SD10 values.
Please suggest me to correct these errors. Your help is much appreciated.Thanks.
Regards.
Sanjeev

Hi V V Reddy,
Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
So i deleted all the partner profiles and created and generated them agian.
I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
Thank you very much.
Regards,
Sanjeev

Sales Order Output - determined by Sales Order Type, Created By

I want have my order output determined by sales order type
(vbak-auart) and created by (vbak-ernam).
I have created a condition table 501, access seqeunce Z001.
In v/48, in accesses for Z001, I created
AcNo: 10
Tab: 501
Requirement: [empty]
Exclusive: unchecked
in fields, I can't find ERNAM in structure KOMKBV1(header), but I find one in KOMPBV1 (item).So I have assigned it to ERNAM.
besides, I have created the corresponding records in VV11
I expect to have:
Output Z001 will be created for sales order type OR if created by user XXX
However, no output is generated. When I go out detemination analysis, I found that in the output determination procedure, it did go into output type Z001, but, since no value is found for "created by", i got message "Access not made (initialized field").
I suspect that no value stored in KOMPBV1-ERNAM. Do you know how I can get it done?
Points will be awarded for useful information. Thanks in advance.

Hi
You have to include this field as a Zfield in the structures KOMKBV1, KOMPBV1 and KOMB.
You have to include the field as Zfield in these structures.
Once this is done, you should also be able to update this field in the structures.(As on now, you have only created a field, but you have not mentioned how the field has to be updated.
In order to update the logic, you have to do a small code in one of the user exits for outputs.
In the user exit, you have to write a code like this
MOVE VBAK-ERNAM = KOMKBV1-ZERNAM(this is the zfield you have created)
Now create the condition table and do the rest.
Your output should work fine. The user exit I was saying is the subroutine USEREXIT_KOMKBV3_FILL in the include RV61B902 in the user exit RVCOMFZZ. If you can give this info to the technical guy, he should be able to find out the same for saels order output also.
The user exit RVCOMFZZ also has the subroutine USEREXIT_KOMKBV1_FILL which you can verywell use for your requirement. This will solve your problem
Hope this helps.
If you have any problems in this, you can again put the problems in this thread. I will try to solve.
Reward if this helps you

Output type for Diff Orders???

Hello guyz,
I would like to see the output types used for different order types, I would appreciate if you could let me know the T-code or step by step procedure to check.
Thanks.
Mohammed

Hi Mohammed,
You may also do it this way since you want to check the output types maintained for different order types. Whether the output type is being used for a particular order type will depend on whether the condition record is being maintained. You can check the individual output type maintained in the output procedure and then check the condition records for each key combination.
Another way would to check would be as below
1. Browse T682I table.Select Application as 'V1'. It will list you the access sequences for Sales and the condition tables being used for maintaining output types for sales.
2. Take the condition table field value and browse on the condition table using SE16 to see what conditions maintained. You will have to prefix 'B' to the table value to browse. for eg if table field value is 006, then the condition table is B006.
See if this helps you,
Regards,
reward points if is helpful

Forgot to put ZPNT (Penalty condition type) in sales order

Dear Expert,
We have created sales order and billing document has been sent to customer,after that we came to know tht we forgot to put ZPNT Condition type in sales order. Now i want to create another sales document with reference to billing document, in which only ZPNT Condition type will be appear (not other condition) and thn will create billing document with reference to new sales order so that ZPNT amount goes to the right ledger A/C......Is it the right process to solve this problem if yes thn please advise me how to fonfigure the system.
Regards
Parul Deshwal

hi Parul,
rather than doing this which is quite complecated process
saying complecated because, when u do Copy from billing to sales document all condition will appear and might be there r some mandatory conditions in pricing procedure which you can not remove.
Above all, IF your condition ZPNT value is based on some other conditions then also it will not be possible for you to calculate it correctly.
there is one more possible way by creating DEBIT NOTE with reference to sales order but again you might have to face above mentioned problems
So better you follow standard and easy method
1. Reverse the billing document if PAYMENT is not posted
2. Reverse the Delivery (if any)
3. add your condition type to sales order for line item and create it
Regards

Output type config -- Sales Order

Similar Messages

Maybe you are looking for