EDI Output ZB00 not getting determined in case of Split Deliveries.

Hello All,
A very Good Morning to you,
Hope you are doing good,
We have come across one critical Issue where the EDI Output ZB00 Dispatch Advice is not getting determined in case of few Split Deliveries in PROD.
Issue : On a daily basis our Client is generating Split Delivery Process used for some specific customers only.
These specific customers we are maintaining in ZPARAMS Table. The Flow of the Process is as below.
Sales Order -->Parent Delivery ZLF--> Split Delivery ZLS--> Invoice ZF2.
First the Sales Order ZOR is created through VA01 or EDI.
This ZOR is processed via ZVL10A to create parent delivery ZLF.
Once the parent delivery ZLF is created an Outbound IDoc SHPOD gets triggered which goes to the Distribution Centre Technicolor UK to check the confirmed qty and materials that needs to be delivered.
Once the Quantity is verified and confirmed from DC an Inbound IDoc SHCON interface SAP.
This Inbound SHPCON IDoc checks the entry in ZPARAMS for that customer. If the entry is found it creates one more Split Delivery ZLS doing picking and post Goods Issue in one step. This is the point where the ZB00 output is determined automatically in ZLS Delivery and processed successfully immediately.
After that the Normal Invoice ZF2 is created.
We have given the process flow details in the attachment along with Functional Modules used by the EDI Team.
Now the Issue we are currently facing on a daily basis in PRD Out of the Total Count of ZLS Deliveries in few of ZLS Deliveries ZB00 Output is not getting determined at all which is causing a huge revenue loss. For remaining ZLS Deliveries it is getting determined correctly and processed.For Split Delivery we have only 2 Customers.
We would like to know why this is happening in case of only few ZLS Deliveries.
As a work around we have just write one program for these disputed deliveries where it will go in VL02N of these deliveries and save it without doing any changes. This will make ZB00 determined and processed immediately.
We have even check the scenario in Quality Client no Issues at all. It is getting determined and processed successfully for all the test cases we created.
Please could you help us on this so that we can fix this critical Issue.
Many Thanks,
Farhan.

if QA system works correct
you probably need to find the difference between it and PRD client.
I guess it is a huge job.
but who does if not you?
because you have  a lot of custom things included coding
also request abaper.

Similar Messages

  • VA00 condition type not getting determined for the returns order

    Hi All,
    I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
    When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
    Note:VA00 condition type is getting deleted from the  internal table tkomv[].
    If any one came across  this scenario can you please help me.
    Request your valuable inputs

    Hi,
    Please check the copy control setting in VTAA.
    Maintain the pricing type as "D" at item category level for the respective document type .
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Batch is not getting determined

    Hi,
    We are facing a serious issue while we create a TO from a Project delivery, batch is not getting determined so automatic confirmatin is also not happening. Please note that we are using Leanwarehouse and the movement type 281 and the special stock is Q. We have also maintained entries in VHC1 batch search strategy.
    Please help me in resolving the issue and let me know in case i need to maintain more settings
    Warm Regards,
    Sridhar b

    I think the problem is the stock catagory.
    "Q" or "S" material is not meant to be picked for out bound delivery, mvmnt type must be specific for Q stock
    try lt03 manual t.o. creation in the forground (entering the source info of the q stock) for the delivery I would expect to see a source bin error "no available stock in bin"
    meaning that SAP does not see "Q" material as available for picking
    Edited by: Arakish on Mar 24, 2010 5:39 PM

  • Output type not automatically determined (no output device specified)

    the output device is already specified for this output
    we dont want to manually add the output on all the invoices where the output was not automatically determined before... what should we do?
    is there a way not to manually add them?
    thanks in advance
    Pablito

    Hi
    You really dont need to add the output in all these documents.
    You have to maintain the masterdata for output records in VV31.
    Now just open all the invoice documents one by one in Change mode through transaction code VF02 and just save it
    Whenever a document is opened in change mode, the output gets automatically triggered. Hence the output type will be automatically populated in the output screen. Once you save the document, the output gets successfully executed, and you will get the desired document
    Reward if this helps you

  • The agents are not getting determined

    Hi Gurus,
    In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
    Below are the steps followed:
    We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
    We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

    Hi,
    Kindly Diagnose your WF:-
    Use the following transaction:-
    1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
    2> SWEL -> DISPLAY EVENT TRACE
    3> SWUD -> WF DIAGNOSTICS
    4> SWPR -> WORKFLOW RESTART AFTER ERROR
    Enter the WF Number and Click on the LOG Icon.
    There you can see the Graphical Log of the WF to know where the WF is stuck.
    And You can also check the Technical Details of the WF there, to find which WF Container has what value.
    In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
    Kindly check and revert back, so that a solution can be provided.
    Regards,
    Kanika

  • Storage location not getting determine in Sales order

    Hello All,
    Storage location not getting determined in SO, every time when i update picking i have to manually enter the storage location.
    I saw few of the response in the SCN but one thing i noticed in my system was, when i enter OVLQ i don't see OR order type, and for order type BV which is present in system assigned to MALA but still when i am creating CS order still storage location is getting determined.
    Please help me to resolve this issue.
    Regards,
    Vishwanath.

    Hi Vishwanath,
    OVLQ is Delivery type and storage location determination and not for sales order type as you assumed
    As per standard for BV cash sales order type subsequent Delivery Type is BV and hence you can see the value MALA against BV
    Just check for LF delivery type there would be storage location determination assignment
    Storage location is determined at Delivery level and not at order level
    thanks
    santosh

  • MWST not getting determined in CRM Sales Order

    Hi All,
    I am working on a scenario where we are using MWST for tax calculations. I am able to get the tax calculations correctly in ECC but when I create a Sales Order in CRM, MWST is not getting determined.
    I have maintained the following
    1) Downloaded the ECC customizing into CRM
    2) Downloaded the pricing procedure into CRM
    3) Downloaded the pricing conditions into CRM
    4) Downloaded the pricing condition tables into CRM
    5) Maintained the tax classification for Business Partner
    Thanks in advance.
    Regards,
    Sandeep

    Hi Sandeep,
    did you try to use the price analysis in SAP GUI (set user parameter PRC_TRACE = X in SU3) to get further details what is missing for MWST determination? There could be multiple reasons for this issue.
    Best Regards,
    Michael

  • VAT not getting determined in accounting

    Hi All,
                 I am encountering the below scenario where the VAT is not getting determined . When I save the billing document I get a error saying "Error in account determination: table T030K key ME MWS"
    Scenario :
    SP & BP are in NL (Netherlands)
    Supplying Plant is in NL
    SH is in Turkey
    This is a third party sale where the material is directly shipped out of NL to turkey .
    Since we are trying to capture the VAT % in invoice I tried to use a condition type MWAS from the tax procedure .
    1. I have the cond.type MWAS in the tax procedure TAXTR
    2. I created a new table with key combination just Bill to and assigned to the access seq MWST
    3. Country is already assigned to the tax procedure .
    4.I created a new tax code and assigned that to country and tax procedure.
    5.I also assigned Base amount for tax calculation .
    Since MWAS was not in pricing procedure I created this and assigned to pricing procedure with account key MWS.
    I have also maintained VKOA with the new G/L account for VAT and created condition record for MWAS .
    Inspite of doing all these accounting doc is not getting created and I get the error message which I mentioned above, though I see the new condition type MWAS in the billing document.
    If I check T030K table I find  the new tax code mapped to the acct key , and new VAT G/L account.
    Can anyone please tell what the problem is  ? Am I missing something .
    Cheers
    Sridhar

    Hi All,
                 In addition to previous conversation in this thread I want a few clarification .
    My company is in US
    supplying plant is in Netherlands
    end customer is in Turkey .
    So ideally in this thrid partyscenario , materials go directly from Netherlands to Turkey  and since the goods are exchanges at Ex works VAT is being charged .
    In this scenarion , I am using a tax procedure of turkey (TAXTR) . I created a tax code and assigned it to TAXTR in FTXP mentioning the VAT% under MWS account key.
    I have also created condition record for UTXJ with Country as Turkey ,Region in Turkey, Mat Tax class, Customer tax class..,Tax code . I mentioned the amount as 100 here. Is this correct?
    I have also maintained in VKOA ,the G/L to which the tax postings to be done .
    My question in all these settings is ...Do I need to use Netherlands (NL) anywhere , be in FTXP or UTXJ ???????
    Even after doing all these settings I am geting a account determinaiton error which says table T030K key ME MWS .
    One thing I observed is that I am not able to save the VAT% amount against the tax code in FTXP. Will this be a problem?
    Cheers
    Sridhar

  • Date/Time type not getting determined in ODO

    When ODO is created, it's date/time type is not getting determined automatically. due to this, the route determination is not happening which is further creating problem in POSC setup.
    I have setup  date/time types at the path IMG>EWM>Goods Issue Process>OBD>route determination>Define scheduling within route determination.  Here for my new document type+PDO catergory, I have set two date/time types TDELIVERY, TOUTYARD.
    This is set for particular SAP client only.      In current status, to make the system work further, I need to update the ODO manually. 
    under IMG interfaces ERPintegration, map date types from ERP to EWM...  following are maintained correctly
    WSHDRCIDAT
    WSHDRKODAT
    WSHDRLDDAT
    WSHDRWADAT
    WSHDRWADTI
    Please help.

    Hello Santhosh,
    I hope, you might have taken care of the below two screen shots.
    Could you also share some screen shots of the issue where it is not mapping. That helps to understand the issue more.
    Regards,
    Sathish

  • Partner function not getting determined automatically in delivery

    Hi,
    I have a requirement to determine custom partner function in delivery related to STO. I have maintained the below settings.
    1. Created new partner function (type KU) & extended to account groups.
    2. Maintained the partner function in the delivery partner determination procedure.
    3. Defined partner function in ship to party
    Now the new partner function is not getting determined automatically.
    Kindly provide your inputs.
    Thanks
    Rama

    Hi Rama,
    . Defined partner function in ship to party
    Sorry for editing i just read that it is a STO order,Now can you please check the partner function in PO doc.
    Hope it will help.
    Thanks,
    Davinder
    Edited by: davinderpalsingh on Sep 21, 2011 5:20 PM

  • Organisation unit not getting determined

    Hi All,
    I have configured 4 transaction. Same partner determination profile, text deter procedure, org. data profile and date profile is assigned to all of them. But in only 2 of them organisational unit, sale office and sales group is not getting determined.
    What could be the reason for this?
    Regards,
    Nikhil

    Hi Nikhil,
    I think buffering CRM sales areas might help you.
    In CRM the sales areas are represented in the organizational model, this means they are not physically stored, but they are the result of the different combinations of sales organizations, sales offices, sales groups, channels and divisions maintained in the organizational model.
    Whenever a CRM transaction or a business partner needs the sales areas, they are calculated, and this is an expensive process. To speed up this process, the sales areas are buffered.
    Report HRBCI_ATTRIBUTES_BUFFER_UPDATE is used to buffer the attributes of organizational management objects. To enable buffering you have to maintain view T77OMATTR.
    1. Go to Tcode : OOATTRCUST
    2. Select the structure node Scenarios.
    3. Flag the field in the column Buffering for the scenario SALE.
    4. Choose Save (Ctrl+S).
    Then run the report in Tcode: sa38
    1. Tcode: sa38
    2. Select the report HRBCI_ATTRIBUTES_BUFFER_UPDATE.
    3. Flag the fields Delete All Buffers and Restructure Buffer on (Date).
    4. Choose Execute (F8).
    In Note 737315 further details regarding this topic are described. Note you can also schedule a job in transaction SM36 to run this report regularly.
    Hope this helps!
    Regards,
    Chethan

  • Output fax not getting triggered when sales order credit block is released

    Hi Experts,
    I am working on an issue.
    I have one sales Order which has credit block.
    when we release the credit block via vkm3, then the output fax gets triggered.
    I have another sales order which has credit block,
    when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
    If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
    Any advice on this please.
    Regs,
    SuryaD.
    Edited by: SuryaD on Oct 21, 2010 9:34 PM

    Hi Brad,
    Thanks for your response.
    Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
    Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
    I went to Go to -Determine analysis for both orders 1 and order 2.
    in both the analysis i am able to see the output ZFAX.
    *Analysis Output*
    *Order 1                                                                    Order 2*
    1. ZFAX                                                                   1.   ZFAX
        10(Z010)                                                                 10(Z010)
           0000122426                                                              0000122427
    2.  ZFAX                                                                   2.   ZFAX
    When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
    There in just 2 differences as below.
    In the above screen,
    1.Order 1 ==> has some value 0000122426
    2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
    Diagnosis
    Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
    In the above screen
    1.Order 2 ==> has some value 0000122427
    2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
    No more information is available.
    Please guide as to how to initiate the debug for output processing ?
    Which screen where to switch on debugger.
    where to look further?
    Regards,
    SuryaD.
    Edited by: SuryaD on Oct 22, 2010 11:41 AM

  • BOM is not getting displayed in case of centralized planning plant.

    Dear All,
    there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
    kindly through some light on it. whether i have to do some settings for it.
    Regards,
    Ritesh Kapoor

    Hi,
    Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
    Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
    Ritesh

  • Free Goods not getting Determined at the Order Level

    Dear All,
    I have activated free goods settings and also maintained free goods master record for exclusive free goods.However when I am entering the main line item the second line item in the sales order which should contain the free qty is not coming,please advice what needs to be done.
    Kind Regards
    Atul

    Hi Jelena,
    Thanks for your post with this I could find out what was happening.The following is the analysis once I switched on the free goods determination at the order level and below was the system response.
    Diagnosis
         There are certain business transactions where it is not possible to
         determine free goods in the SAP standard system: reason 3
         Explanation of reasons
         1      Document category is not from sales order category (VBTYP <> 'C'
         2      Lower-level item
         3      Bill of material
         4      Product selection
         5      Configurable item
         6      Scheduling agreement/forecast delivery schedule
         7      Item with active ingredient management
         8      Item without schedule lines
    I had found that in my item category the structure scope was marked as A where it was exploding the single level bill of material.Once this configuration was turned blank which is no explosion the free goods were getting determined.
    Kind Regards
    Atul

  • Output type not getting saved in the PO

    Hello Team
    we are facing one issue where output type is not getting saved in the PO.
    we give one output type and than save it , after going back to the PO we see that it is not there.and no output issued
    the PO is released properly and there is no issue , any idea what could be the reason for it

    Hi,
    Check in SU3 t.code, did check box selected u201CDelete After Outputu201D in Spool Control segment in Default TAB
    Also check Partner Function VN maintained in Default values TAB in NACR--- > EF Application for your output type
    Cross check partners {VN, PI, GS) are assigned to your PO output type in Partner Roles per Message Type
    Regards,
    Biju K

Maybe you are looking for