Warning 20255 appearing while upgrading to acrobat 7.1.0

During the upgrade process from acrobat 7.0 to acrobat 7.1 on my 32 Bit windows XP-Pro system, the following warning is displayed:
"Warning 20255: The acrobat 7.0 installation program could not create a new element: Adobe pdf converter. The adobe pdf printer will possibly not be available" (Translated from German - I apologize for errors) When I continue, the pdf printer is really not available.
Is there anybody out there who could help me? I would really appreciate it.
Thanks in advance
Georg H.

Hi Dharamveer,
Thanks for your quick reply ...
As I understand 7.1 supports Java 1.5 version, but I am still in upgrade process and the upgrade manual or related notes does not mention this version is needed as a pre-qrequisite or to fix related to our issue. So,wondering is this relevant to fix our issue?
As of my current my upgrade process has stopped and the sdt Gui is wating for us to fix the issue...
Please advise...
Thanks,
Mohan

Similar Messages

Invoice Receipt Warning Message Appear After Upgrade from 4.6C to ECC6

Hi Gurus,
We do upgrade from 4.6C to ECC6. And we do Invoice Verification base on Delivery (Vendor delivery number), in our business process there more than one Purchase Order has same Vendor Delivery Number while GR executed. But only one Purchase order related to Invoice verification, others PO are Free PO (no need Invoice Verification).
The problem is:
In SAP 4.6C, while execute Invoice base on Delivery (Vendor delivery), system automatic select only PO with Delivery (vendor) which related/allow invoice receipt.
In SAP ECC6, while execute Invoice base on Delivery (vendor delivery), all PO selected. So than there are warning messages appear (warning pop screen) for those PO not allow invoice Receipt (message M8035: PO item XXXXX does not allow invoice receipt), and at the end PO which allow Invoice receipt then appear for further Invoice Receipt process.
At overall, the final result SAP 4.6C and SAP ECC6 is same (only PO which allowed Invoice Receipt will processed further).
The Question are:
1. Why in ECC6 appear warning message, while in 4.6C no warning message ? Is there config to ignoring the warning message. I've try to maintain system message for M8035 (t-code: OMRM) to ignoring the pop screen, but can not created.
2. How do we make warning message dissapear (no need warning message), because if the PO's has hundred items so user need to click enter hundred times.
Thanks in advance.
Regards,
Tri Wicaksono

Hi,
could you please check whether the flag "GR-based IV" is set in the purchase orders?
If GR based-IV is ticked, then this pop-up cannot be suppressed.
If you would like to post the invoice first then GR-based IV should not be checked, otherwise this pop-up will always appear. I am afraid that this behaviour is standard.
Please, be aware that this feature is only available if you set in the Purchase Order item the 'GR-based IV' indicator:
   If the GR-IV flag is not set in the PO, then the system does not
   differentiate individual goods receipts. Please see the <f1> help
   for the field "GR-IV" in the PO item detail. Since the individual
   receipts are not differentiated, an invoice is not tied per se to
   an individual receipt and a goods receipt can be reversed despite
   an invoice receipt.
With the GR-IV flag set on in a PO, you can specify which goods
   receipt is being invoiced in an IR and which goods receipt is being
   reversed in a return. It is this correlation between goods receipts
   and invoices that enables you to specify for GR-IV PO's whether an
   item can be returned despite an invoice.
Please refer to the note :457511 Question 10.
Best regards
Erika

HT201210 Sign appears while upgrading iOS6 "unexpected error" is there a solution?

I try upgrading iOS6 in my iphone 4s but at some point it stops and a sign appears "unexpected error occurred" what can ido???

Any specific error code?

Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please t

Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please try again. If it continues to fail contact adobe support. Please assist me asap, i need this working ASAP as i specially purchased for immediate use.. thanks:)

No, there was no option for enter the serial number, which i gather u mean by S/N?

While upgrading to IOS 5 on my iphone 4 the " " add sign doesn't appear on my contacts ?????

While upgrading on my iphone 4 to IOS 5 , the "+" sign Add doesn't appear on my contacts ???
I got an error ( 1635) but i don't know if this got somethingto do with my problem, though
thx for someone who could help me

Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
http://support.apple.com/kb/HT1808

OUI-10091 error, while upgrading from 10.2.0.1 to 10.2.0.2

Hi,
While upgrading from from 10.2.0.1 to 10.2.0.2, im prompted with OUI-10091 error,
i tried to find out in google...but couldn't(incomplete answers)
Help me on how to proceed and install the ptach.
Regards,
- Sri

I guess troubled u lot.. but this what the README says:
Note:
If you attempt to install this patch set in an Oracle home directory that does not contain an Oracle Database 10g release 10.2.0.1 or 10.2.0.2 installation, Oracle Universal Installer displays a warning dialog with the following error:
OUI-10091: There are no patches that need to be applied from the patch set Oracle Database 10g Release 2 Patch Set 2
10.2.0.3
The Oracle Universal Installer does not allow the installation to proceed. Click OK, then click Cancel to end the installation.
Log on as a member of the Administrators group to the computer on which you are going to install Oracle components. If you are installing on a Primary Domain Controller or a Backup Domain Controller, log on as a member of the Domain Administrators group.
Start Oracle Universal Installer located in the unzipped area of the patch set. For example, Oracle_patch\setup.exe.
On the Welcome screen, click Next.
In the Specify Home Details Screen, select the name of the Oracle home that you want to update, or select the Path that you want to update from the list, then click Next
If you are installing the patch set on an Oracle RAC cluster, click Next when the Selected Nodes screen appears.
Regards,
- Sri

Sharepoint server synch for Tracker not happening since upgrade to Acrobat 9 Pro

Hi,
I have a user that is unable to share his comments and see updates in Tracker using Acrobat 9 Pro. There is a warning on Server status that says "some workflows are in error." It seems that synchronization is with the server is failing, though his connection to the network is otherwise solid. User can go to the server and go to the folder and open the PDF folder without any issues, but synchronization with server within Acrobat 9 Pro Tracker is failing. He can join reviews, but is unable to see other reivewers comments and can not see any of the other 8 reviewers listed, he can only see himself and the initiator.
I did verify that the initator and all reviewers are also using Acrobat 9 Pro. Only this one reviewer is having issues, everyone else is ok.
The issue started to happen after user was upgraded to Acrobat 9 Pro. We did try a repair in add\remove programs, but this did not help. I am wondering if there is anything on the backend, somewhere that needs to be changed. User did go into a few other Shared Reviews on the Sharepoint server and was able to see 5 reviewers.
Here are my questions:
1. Is there some sort of unique identifier that needs to be changed?
2. Can the initiator delete this one reviewer and then add him back, and would that possibly solve the issue?
Thanks,
Julie

Hi Damir,
On the page mentioned above you need to click on 'Buy Now' at the right hand side as shown in the screenshot below :
After that you will see this screen :
Click on 'Subscription' drop-down and select 'Upgrade', The other dropdown menus will be updated accordingly and you need to select 'I own' as 'Acrobat 9 Pro,
Platform and Language accordingky.
Then you can 'Add to cart' and checkout.
Regards,
Rave

Strange bug -- adding one more button OR page causes Form warning to appear

I'm building a simple interactive document in InDesign CS4 on the Mac, to be exported/delivered as a PDF. There are a few text-based buttons on the Master Page that are set to Go To a Text Anchor on Release. There are 4 buttons of these buttons on the page, and each one leads to a different page in the document, and they all work fine. They are all built the same way.
I want to export a PDF that opens cleanly in Reader, meaning no unexpected dialog boxes or warning messages appear. Up until this point, my document opens cleanly in Reader.
However, when I create a FIFTH button (using the exact same method used to create the other buttons), OR I add ANY more pages to my document (which currently stands at 16 pages, but will need to ultimately be upwards of 40), for some reason, opening the PDF in Reader causes Reader to start displaying the large, distracting pink warning message at the top of the page:
"Please fill out the following form. You cannot save data typed into this form. Please print your completed form if you would like a copy for your records."
The fifth button I create (from scratch) causes this message to appear.
Or, if I add another page (using my Master Page, where the buttons are used), this message appears. Even if the fifth button is not created, and I add another page from the Master, this message appears.
If I add a blank new page (without using the Master Page), the message does NOT appear.
So, for some reason, adding ONE more button, or referring to the Master Page in the document ONE more time by adding a 17th (or more) pages, seems to kick InDesign/Acrobat Reader into thinking my document is suddenly a form, and causes Reader to display that obnoxious pink message when opening the document.
I've tried several troubleshooting steps.
- I've ensured my buttons have unique names.
- I've tried creating the fifth button from scratch, and also tried creating it from duplicating one of the existing "good" buttons.
- I've made sure the button has a destination page/Text Anchor to go to.
- I've opened the PDF in Acrobat Pro 9, and gone through all of the page and buttons in the Forms Manager, and there is nothing out of the ordinary in that view.
Why is Reader suddenly thinking my document is a form (that "cannot be edited/saved") when I add one more button, or one more page!? It's bizarre, and quite frustrating.
Thanks for any insights,
Robbie

You can use that same workaround with ID CS4 files. You just have to make the PDF and then go into Acrobat to add the security that doesn't allow editing (Acrobat -> Security -> Encrypt with Password) . That gets rid of the warning about the form. Of course if you actually have a form somewhere in your document, you won't be able to use that......

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?
The issue is they type but there is 2 second delay when it appears in the field.
Windows 7 64bit

I see, I misread your reference to Reader 11 to mean you were using Acrobat 11, but it looks like it worked out anyway.
The base-14 fonts are special in PDF because they are guaranteed to be available even if they are not embedded. If you select a non-base-14 font for use with a form field, the entire font usually gets embedded, since each glyph it contains has to be available for use with the field. This can take up a lot of space if you do this a lot, and the space isn't reduced if you change back to a base-14 font later because the internal reference to it is not removed. This is caused by the bug I mentioned.
In your case, however, the entire font doesn't get embedded because fonts like it (e.g., large asian fonts with a lot of glyphs, Arial Unicode) would take up too much space if fully embedded. If it did, a 100KB PDF could bloat to 20MB with that one change. Instead, users are expected to have such fonts installed on their system, which is why you were prompted to install the font pack. This despite the fact that the font was not actually used by anything in your document, it was simply the orphaned reference to it that triggered this. This should get fixed in Acrobat eventually so this type of thing doesn't happen again.

Upgraded to Acrobat X and signature field stop working

Upgraded to Acrobat X and IntegriSign signature field stop working. When I open the pdf and click on the signature field I get a "This plug-in is intended for validating signatures signed using earlier versions of Acrobat. To sign using this version of Acrobat, use "IntegriSign for Acrobat 9.0 and later" handler.
Under Perferences in Acrobat, 9.0 and later is checked.
In LiveCycle Designer - IntegriSign is indicated for Signature handler.
Can't figure out how to solve this. I have uninstalled, reset IntegriSign and Adobe settings a trillion times!
Please help!

I tried these steps several times. Kinda long:
Here are the steps to setup ePad signatures with Adobe Acrobat 9 and later:
>
> You will need to create a self signed certificate (id) and have IntegriSign select this to be used with Acrobat. Here are the instructions:
>
> 1. In Adobe Acrobat choose Advanced > Security Settings.
>
> 2. Select Digital IDs on the left, and then click the Add ID button.
>
> 3. Select Create a Self-Signed Digital ID for Use with Acrobat, and click Next.
>
> 4. Specify Windows Certificate Store, to store the digital ID, and click next.
>
> 5. Type your name, email address, and other personal information for your digital ID. When you certify or sign a document, the name appears in the Signatures panel and in the signature field.
>
> If the computer is for public signing, you can replace your name with the name of the PC. It is not practical to have a digital id for every person that signs. IntegriSign will still ask for the signers name and signature.
>
> 6. Go to Windows start => all programs => IntegriSignDesktop => Desktop => Desktop Configuration => Select button (under certificate selection in the lower right of the window). At this time, you should see the digital id you just created.
>
> 7. Choose the certificate you just created, and click the OK button.
>
> 8. Go to Adobe Acrobat ->Edit -> Preferences -> Security, click on the Advanced button and make sure IntegriSign for acrobat 9 and later is selected as the default in the Creation. Also make sure the Verification is set to default method and the method is IntegriSign for Acrobat 9 and later.
>
> If IntegriSign is not an option then go under Edit/Preferences-->General (not Security) find the "Application Startup" checkbox 'Use only certified plug-in' CHECKED. Uncheck the box and repeat the first procedure.
>
> 9. Now, open a PDF file, and perform the signature using ePad, and should be able to sign.

How do I collect my free Lifecycle Designer for upgrading to Acrobat XI?

Just had an hour long run-a-round with customer support over this ...
Important P.S. for LiveCycle Designer Users!
You’ve probably already heard that LiveCycle Designer will no longer be shipping with Acrobat XI. But don’t panic. For those of you who have been using LiveCycle Designer with Acrobat 8*, Acrobat 9 or Acrobat X and want to upgrade to the latest and greatest, we’re offering a free version of LiveCycle once you upgrade to Acrobat XI, just so you can keep on using the programs you’re used to working with. Just get in touch with us and let us know that you’ve upgraded to Acrobat XI. Our customer service representatives will be happy to provide you with the latest version of LiveCycle Designer so you can continue to get your work done as usual with Acrobat XI.
http://blogs.adobe.com/conversations/tag/acrobat-11
Did I not upgrade from Acrbat X to XI - or are Creative Cloud Member NOT eligable for this free version?

Ken,
All I have heard from support is this message from the original escalated ticket. Any advice?
Your Adobe ID:
Your Case Number:0209533712
Hello Fred,
Thank you for contacting Adobe.
You contacted us as you were unable to get the benefits of LiveCycle Designer.
We truly apologize for any inconvenience caused to you.
While checking up with your account we found no serial number of Acrobat 11 under your account, which is why your request could not be processed.
You are also requested to provide us the serial number of Acrobat 11 in response to this email.
For any assistance you can always get in touch with us via live chat (24 by 7) or you can contact Adobe support at 1800-833-6687(Monday–Friday, 5am–7pm PST).
You can also visitwww.adobe.com/go/supportportal for any assistance regarding Adobe products. You may also visit www.forums.adobe.com as it’s a useful resource for self-help.
Thanks & Regards,
Amanpreet Singh
Sent from my iPhone

No PDF printer after upgrading to Acrobat X Professional

Hi, I recently upgraded from Acrobat 6 Pro to Acrobat X Pro (technically, an upgrade isn't possible but the Acrobat X Pro installer will uninstall Acrobat 6 and install Acrobat X). After performing the installation "successfully" I no longer have an Adobe PDF printer under printer and faxes. I'm running Windows XP SP3 (32-bit). If I uninstall X and reinstall 6 the printer comes back. But nothing I do can get the printer there under X. Am I missing something?
Regards,
Tommie

While editing is allowed its just meant to correct a misspelling here or there. Not whole sentences. Another thing that can affect light editing of PDF with Acrobat on OSX.6.7.
On some applications bad fonts (use FontBook) to verify your fonts. Open Fontbook without any applications on (such as acrobat, Reader, Ms Office). select all fonts. in click on box that shows fonts. Randomly select a font. The hold command key(⌘) press A, that selects all fonts. Look for and use Verify Fonts. Any fonts that can not be verified, or repaired with a Font reair Program should be removed.
also while all fonts are selected, look for an use reconcile Fonts. This looks for Duplicate fonts. In some cases the same application would use one version one time andanother another time thus causing spacing problems. click on each one found and see which is duplicated. Disable the oldest version.
do this with all duplicate fonts found.
If the above corrects the problem, locate disabled fonts, User >Library >Fonts disabled and Main Library Fonts disabled remove to desktop Make archives and place archives in safe place( in case you need to swap fonts).
Next if you have X.6.7 Install this Patch: http://support.apple.com/kb/DL1377. This corrects some font problems caused by the OSX.6.7 the update that affects Adobe Products, (such as Acrobat, Reader Indesign and others, As well as Microst Products for Mac)

Why does my yahoo mail sign in seal not appear while trying to sign-in

Why does my yahoo mail sign in seal not appear while trying to sign-in when I use firefox only but with MS Internet explorer the sign-in seal appears with yahoo.com

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache
Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
and
* Remove Cookies
'''''Warning ! ! '' This will log you out of all sites you're logged in to.'''
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy.'''
Under '''History''', select Firefox will '''Use Custom Settings'''.
There is a button on the right side called '''Show Cookies'''.
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Custom Prompt to Require Upgrade to Acrobat 9

I have a Acrobat 9 PDF that has Flash Multimedia Elements and I want to require that users with Acrobat 8 or lower to upgrade to Acrobat 9.
I would like to be able to customize/modify this error prompt:
"This file appears to use a new format that this version of Acrobat does not
support. It may not open or display correctly. Adobe recommends that you upgrade to the
latest version of Acrobat products. Please visit our products site at
http://www.adobe.com/acrobat."
Is this possible to do with the SDK?

You can't customize that message, but you could put up your own via JavaScript at the document level of the PDF.

Differ in Exch appears while clearing account 1212 where no forecurren used

Hi All,
Please help me on this issue,
Difference in Exchange appears while clearing account 1212000 where no foreign currency is used.
Problem description: as one of my activities is clearing of account 1212000. On this account loan interests and its payment are recorded. All amounts are posted in EUR. No DIE should be recognized and while clearing this account there should be no impact on P&L:
However while clearing (doc no 20000503801 Difference in exchange in amount of 13.567,40 EUR (equal to 18.336,73 USD) were posted automatically on account 5432100.
As I have noticed while August closing this Diference in exchange will be automatically reversed late evening while valuation report is running:
I have two questions regarding this issue:
What is the reason that Difference in exchange appears for transactions performed in one currency. Is it designed on purpose or is it a spin-off effect of performed upgrade? Before upgrade there was not such an issue.
1.In case if these Difference in exchange remains will it be always reversed automatically while valuation?
Thanks in advance
Nandha
Edited by: nandhasapfi on Sep 28, 2011 7:11 AM

Hi Raghavendra,
Yes, the SAP note is very helpful and it is indeed due to the one of the tax condition being processed and therefore its tax code flow down to the other non tax items.
I have tried to shift up the conditon type before the tax condition in the procedure, but i realised that it generate billing errors.
Initially, the sequence in my PP is
270     0     ZGX1     GST Pseudo 1
280     0     ZGSX     GST Exclusive
290     0     ZGXA     GST Absorb
300     0     ZGX2     GST Pseudo 2
310     0     ZGX3     GST Pseudo Diff.
The tax code comes from ZGSX, which is created as a tax condition type using ZGST as reference.
I tried to shift ZGX2 to step 275 below ZGX1 so that it will not inherit the tax code from ZGSX, but it gives billing error.
I tried moving ZGX1 down to step 295, but it also give billing errors.
When I removed the reference to ZGST for ZGX1, and change the calculation type to formula, it removes the billing errors. But I got zero values for both ZGX1 and ZGX2, even if i read table with key KSCHL = 'ZGSX'. I tried 'ZGST' with no success also. Good news is, the tax code in ZGX2 is gone.
Strangely, if i change the condition type of ZGX2 to reference to ZGST, and use the same formula as ZGX1, it does not gives billing error. But ZGX1 continue to be empty.
Can someone help me on this?
Thank you!
Albert Lee

Warning 20255 appearing while upgrading to acrobat 7.1.0

Similar Messages

Maybe you are looking for