Over the limit notification

Has anyone else noticed that Verizon has stopped sending over-the-limit texts messages to your phone?
I was told they did it at 90%, then about 100%. They have done this for me for a couple of years, this past billing cycle they didn't and i assumed since i had not heard from them, i was not over the limit and didn't checked. Got stuck with an additional charge on my bill.
When I inquired about it, I was told they don't guarantee that they will send text message notifications.
Anyone else run into this?

I got color change to red in console when threshold
is over the limit, but I didn't get any notification
by email.Did you actually turn on the email action for that limit? It's not automatic as soon as you configure Solaris to send email.
In the Attribute Editor window, right next to where you specified your red (critical) limit in the "Alarms" tab, there will be an "Actions" tab. You need to turn on the email action for the critical threshold. Get rid of the current red alarm and make a new one to test it.
If you want to configure email actions from a single place (instead of for every severity of all the things that can go wrong on each system, by hand): take a look at EventAction:
http://www.halcyoninc.com/products/EventAction/index.php
Regards,
[email protected]

Similar Messages

  • HT1420 I forgot to deauthorize two old computers, putting me over the limit of 5. Do I deauthorize all and then reauthorize the 4 I have left? Can I just deauthorize the old two somehow?

    I forgot to deauthorize two old computers, putting me over the limit of 5. Do I deauthorize all and then reauthorize the 4 I have left? Can I just deauthorize the old two somehow?

    ". Do I deauthorize all and then reauthorize the 4 I have left?"
    Yes
    Can I just deauthorize the old two somehow?"
    No

  • Can't add any more buddies, but i always could, even over the limit..

    On my iChat buddy list (on an AIM account), I have a lot over the 200 maximum, and it has always worked fine. I had almost 300 buddies, and then tried to add a few more. The first one worked, but the second two adds didn't. Is there a way to fix this other than deleting some buddies?

    > I've got a site which is built entirely with AP Divs (in
    CS3). Messy, but
    > quick and easy.
    You pay a serious price for the "quick and easy" part, buy
    you may not be
    aware of it yet.
    > I've got to the stage now though, where I can't add any
    more. I can draw
    > the
    > shape using the Draw AP Div tool, but as soon as I let
    go of the mouse
    > button,
    > the box disappears (it doesn't get as far as becoming a
    blue box).
    There is no limit on the number of AP elements a page can
    have.
    > One thing I have noticed is that if I use design view to
    delete an AP
    > element,
    > it doesn't seem to get removed from the code.
    This would mean that you aren't really removing the element
    from either
    Design or Code view. If the code is there, the element is
    there. If the
    code is not there, the element is not there.
    > Anyone got any ideas?
    It would be hard to diagnose what might be happening without
    seeing your
    page and its code. Can you post a link?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "aliprior" <[email protected]> wrote in
    message
    news:ge1mjo$i4p$[email protected]..
    > Hi,
    >
    > I've got a site which is built entirely with AP Divs (in
    CS3). Messy, but
    > quick and easy.
    >
    > I've got to the stage now though, where I can't add any
    more. I can draw
    > the
    > shape using the Draw AP Div tool, but as soon as I let
    go of the mouse
    > button,
    > the box disappears (it doesn't get as far as becoming a
    blue box).
    >
    > I've checked that it's not hidden beneath another layer.
    >
    > One thing I have noticed is that if I use design view to
    delete an AP
    > element,
    > it doesn't seem to get removed from the code.
    >
    > Anyone got any ideas?
    >
    > Thanks,
    >
    > A
    >

  • GOING OVER THE LIMIT

    I have had the limited "USB" modem for 6 months and all of a sudden last month went over the 5120.  Not by much, but I had never even come close to going over before.  When I checked daily use on the bill there are several days of higher than my normal use.  It didn't take many days of triple and quad  to trigger extra charges.  The time and sites that I use have not significantly changed.
    Now, someone tells me that my computer can be running things in the background that I don't even know about.  Someone also mentioned that the little light on the front of my laptop flashes when info is being received. 
    Can someone tell me what the heck is happening and how I can stop it.

    dEaDpiMp wrote:
    About Three or Four months I started going over the "data usage limit"   I have canged nothing in my habits and some how my data usage has nearly tripled.   I had 200 to 300 dollar bill.  Anyone else had the problem with this. Something is funny!!
    Try to call everyday to verizon and check your data usage, keep in mind that Verizon has a 72 hour delay on some data usage and if your roaming it can be up to 30 day delay.  Also if your going to go over everymonth you might want to look into Virgin Mobil they are unlimited for $49.99 or get another Verizon Wireless Modem.  It is better to $120 a month and have 10GB to play with than to get a bill for $300...

  • Can I chose to pay 'over the limit' charges

    Hi there.
    Nine times out of ten my 10gb broadband usage is fine however i occasionally watch films and tv shows on my laptop which can take my usage close to the 10gb then i find i spend about a week not really being able to do much online.
    To upgrade to 40gb costs £5 more but seems a little extreme. Are there any consequences to just paying the £5 per 5gb charge if i go over and then not if i stay inside the usage. Consequences like it makes me look like a bad customer- affects things like that? I may pay it twice a year or something but I am aware it is a charge and wonder if it has the stigma of bank charges etc
    Thanks

    laura_caulfield wrote:
    Hi there.
    Nine times out of ten my 10gb broadband usage is fine however i occasionally watch films and tv shows on my laptop which can take my usage close to the 10gb then i find i spend about a week not really being able to do much online.
    To upgrade to 40gb costs £5 more but seems a little extreme. Are there any consequences to just paying the £5 per 5gb charge if i go over and then not if i stay inside the usage. Consequences like it makes me look like a bad customer- affects things like that? I may pay it twice a year or something but I am aware it is a charge and wonder if it has the stigma of bank charges etc
    Thanks
    Hi.
    There is nothing wrong, or any stigma attached to having to pay the odd extra fiver. There are no bank charges as such of course.
    It's entirely up to you, and actually sounds like a very good option in your case. There is a possibility you may get an email suggesting you upgrade to a higher allowance package - but you can ignore them.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • I am setting up a new computer. Will not let me transfer fromcomputer to ipod. Says I have already authorized this computer but I am over the limit of 5. When I look at my account it says only 1 is authorized. I have no ability in the manage account.

    I am trying to set up a new computer with my Ipod Nano. Will not let me transfer files. Syas I am over 5 authorizations. When I look at my account, it says only 1, the new computer I am trying to set up. While looking at my account, it won't let me change the computers authorized.

    Hello there, hannahsmom811.
    The following Knowledge Base article reviews the steps for how to authorize and deauthorize computers with iTunes. It also offers up information on how to get help if these steps still don't resolve your issue:
    iTunes Store: Authorize or deauthorize your Mac or PC
    http://support.apple.com/kb/ht1420
    Thanks for reaching out to Apple Support Communities
    Cheers,
    Pedro.

  • Authorizing A New Computer When You're Over The Limit

    There's a limit to the number of computers I can authorize (5). I've reached this limit but no longer have access to any of the 5 computers- what can I do without restoring my iPod to the factory settings and losing all my purchased songs?

    Use the Deauthorize All command documented in this article.
    (53237)

  • Will a return/rebuy to use a coupon put me over the limit?

    Hello,
    Recently I renewed my Gamers' Unlocked for 2 more years, and had been looking for 3 pre-owned games to use the b2g1 coupon on.  The stores around me seem to have a very poor supply of pre-owned games, and what they do have is overpriced or does not come with the artwork(which is a whole other issue).
    So I noticed that Infamous Second Son is on sale online this week for around $22.  I thought to myself, why not order 3, do a return/rebuy in store so I can use the coupon, and trade the other 2 copies to my friends?
    My question is, does the initial order of 3 being returned and then purchased again put me at 6 total copies? 
    Thank you!

    Hey again CBGamer,
    They do not! Any time you return a new title or receive one as part of a bundle offer (ex: Buy 2, Get 1 sales), that title does not count against the annual 3-copy Gamers' Club Unlocked limit. Pre-owned titles are also not subject to the same 3-copy limit as their brand-new counterparts. For additional information though, you may want to check out this FAQ:
    My Best Buy Gamers Club Unlocked
    I hope this helps.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I need to split a huge PDF.  136 MB.  I paid for the service some months ago.    I  know it is way over the limit, but I cannot find a way to divide it.

    I paid for the service,   figured splitting it would be easy.  But I cannot seem to do it.  How do I save the original "in pieces"???

    OK, so no Acrobat 8 after all (so sorry about that hard drive failure, that's no fun at all!). But all hope is not lost.
    I think this what needs to happen:
    Go to www.adobe.com/products/acrobat.html and click Try It Now.
    Click Download Now.
    After the file has downloaded, double-click the installer file that you downloaded to install Acrobat XI.
    Open your PDF your newly installed copy of Acrobat XI.
    Follow the steps in the video that I linked to in a previous post.
    Note that Acrobat and Reader offer different functionally, so the copy of Reader that you have won't do what you're after.
    Best,
    Sara

  • My hard drive have free space over the limit...

    Hi every one, I've a strange issue here. My HD indicate me that I've more space than it should but in «About This Mac» and «System Report» I've 36GB left. The strange thing is that there is about 217Gb of Backup? What is wrong...

    Do you use Time Machine? If not, do you have it enabled?
    If so, it appears to be making backups of your system on your hard drive.
    Here is some info:
    http://pondini.org/TM/30.html
    FWIW, you should not have your backup on your startup drive - if something goes wrong with your drive, you will also lose your backup.

  • Firefox cache is running over the limit I have set

    My about:cache page is reading
    Number of entries: 0
    Maximum storage size: 204800 KiB
    Storage in use: 327666 KiB
    Under the disk cache device.
    I have reset it and cleared it multiple times, but it keeps doing this again each time.

    It seems the cause of this was cleaning my Windows temp folder while I was downloading files with Firefox. Not sure why, but the temporary files are linked to the cache in some way.

  • Read the signal value that pass over the upper and lower limit..

    how to create the system which can read the signal value that pass the lower and upper limit? i've try but the system only read the value that in range of upper and lower limit..thanks..

    Im not very sure if this system can read the value that pass over the limit..because at the save file data so many value(i will attach that file)..and i dont know how to setting to get the failure values only..
    Actually i want to build some system that can read and save value that pass over the limit..i take the signal from simulation sine signal..no hardware required..
    im very new with this software and im in learning process..
    A very big thanks to all that helping me..
    save file data from the system
    Channels 8
    Samples 1 1 1 1 1 1 1 1
    Date 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05
    Time 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216
    X_Dimension Time Time Time Time Time Time Time Time
    X0 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1
    Delta_X 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000
    ***End_of_Header***
    X_Value Sine (Negative Peak) Failures (Negative Peak) Upper Limit (Negative Peak) Lower Limit (Negative Peak) Sine (Positive Peak) Failures (Positive Peak) Upper Limit (Positive Peak) Lower Limit (Positive Peak) Comment
    0.100000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
    0.200000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
    0.300000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
    0.400000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
    0.500000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
    0.600000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
    0.700000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
    0.800000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
    0.900000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
    1.000000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
    1.100000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
    1.200000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
    1.300000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
    1.400000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
    1.500000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
    1.600000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
    1.700000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
    1.800000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
    1.900000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
    2.000000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
    2.100000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
    2.200000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
    2.300000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
    2.400000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
    2.500000 -6.996546 -6.996546 5.000000 -5.000000 6.999999 6.999999 5.000000 -5.000000
    2.600000 -6.996546 -6.996546 5.000000 -5.000000 7.000000 7.000000 5.000000 -5.000000
    2.700000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
    2.800000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
    2.900000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
    3.000000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
    3.100000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
    3.200000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
    3.300000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
    3.400000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
    3.500000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
    3.600000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
    3.700000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
    3.800000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
    3.900000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
    4.000000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
    4.100000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
    4.200000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
    4.300000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
    4.400000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
    4.500000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
    4.600000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
    4.700000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
    4.800000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
    4.900000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
    5.000000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
    5.100000 -6.999136 -6.999136 5.000000 -5.000000 6.999066 6.999066 5.000000 -5.000000
    5.200000 -6.999204 -6.999204 5.000000 -5.000000 6.998993 6.998993 5.000000 -5.000000
    5.300000 -6.999269 -6.999269 5.000000 -5.000000 6.998917 6.998917 5.000000 -5.000000
    5.400000 -6.999331 -6.999331 5.000000 -5.000000 6.998838 6.998838 5.000000 -5.000000
    5.500000 -6.999391 -6.999391 5.000000 -5.000000 6.998756 6.998756 5.000000 -5.000000
    5.600000 -6.999447 -6.999447 5.000000 -5.000000 6.998672 6.998672 5.000000 -5.000000
    5.700000 -6.999501 -6.999501 5.000000 -5.000000 6.998585 6.998585 5.000000 -5.000000
    5.800000 -6.999552 -6.999552 5.000000 -5.000000 6.998495 6.998495 5.000000 -5.000000
    5.900000 -6.999601 -6.999601 5.000000 -5.000000 6.998403 6.998403 5.000000 -5.000000
    6.000000 -6.999646 -6.999646 5.000000 -5.000000 6.998307 6.998307 5.000000 -5.000000
    6.100000 -6.999689 -6.999689 5.000000 -5.000000 6.998209 6.998209 5.000000 -5.000000
    6.200000 -6.999729 -6.999729 5.000000 -5.000000 6.998108 6.998108 5.000000 -5.000000
    6.300000 -6.999766 -6.999766 5.000000 -5.000000 6.998005 6.998005 5.000000 -5.000000
    6.400000 -6.999801 -6.999801 5.000000 -5.000000 6.997898 6.997898 5.000000 -5.000000
    6.500000 -6.999833 -6.999833 5.000000 -5.000000 6.997789 6.997789 5.000000 -5.000000
    6.600000 -6.999862 -6.999862 5.000000 -5.000000 6.997677 6.997677 5.000000 -5.000000
    6.700000 -6.999888 -6.999888 5.000000 -5.000000 6.997563 6.997563 5.000000 -5.000000
    6.800000 -6.999912 -6.999912 5.000000 -5.000000 6.997445 6.997445 5.000000 -5.000000
    6.900000 -6.999932 -6.999932 5.000000 -5.000000 6.997325 6.997325 5.000000 -5.000000
    7.000000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000
    7.100000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
    7.200000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
    7.300000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
    7.400000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
    7.500000 -6.999999 -6.999999 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
    7.600000 -7.000000 -7.000000 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
    7.700000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
    7.800000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
    7.900000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
    8.000000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
    8.100000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000

  • Will I get charged for going over the CC limit?

    I have a CC that I just basically maxed out without going over the limit but was real close.  I want to know if when they calculate the interests on the debt with that put me over the limit on the card which will then trigger them to charge me a fee for going over the limit? I know I should not do this but I have a check coming in a couple of months that will clear the debt completely so no worries there. Thanks in advance

    Jemster wrote:
    longtimelurker wrote:
    Jemster wrote:
    It depends on the terms on the card.  Most of them have an over the limit fee.  The will charge interest on your statement date which is usually a couple days after your due date. I would pay as much as I can by the due date.  No, since the CARD act, they DON'T have over the limit fees, unless you opt in.  (If you don't, charges over the CL can be denied).   So you should be fine.Sorry to give out wrong info.  I think I'll stop posting from now on. There is absolutely no reason for you to stop posting.  We all have once upon a time posted wrong info so there isn't any shame in doing so.  The point of the forum is to learn and not everyone is aware of the provisions of the Card Act, myself included.

  • Mountain Lion: on the Notification Center notification and Mail:  how to limit notifications to an email account?

    Mountain Lion: on the Notification Center notification and Mail:
    how to limit notifications to an email account?
    At least, is it possible to choose what email account, the arrival of a message launch a notification.
    When running more than a dozen e-mail accounts, it may be appropriate to display only the notifications of one or two major accounts.

    Which os are you using?  Which Mail version are you using? 

  • Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.Can someone answer it?

    Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.I tried doing the following still the email sync is not working.?
    Here's the step by step:
    1. Go to Settings --> Notifications --> Mail --> Select any of your email accounts
    2. Notification Center: ON
    3. Alert Style: Banners or Alerts (I've only tested it to work with Banners...)
    4. Show Preview: ON
    5. View in Lock Screen: ON

    Hi uneleashurself and thanks for your answer.
    Forgive my language but getting to talk to the Safaricom customer service is a real pain in the **bleep** - if you ever get to talk to them, that is.
    I've never got an answer to my phone calls in three years and their customer assistans in the shops usually have no clue about whatever it is you're asking them.
    I talked to a few of them in a couple of different Safaricom shops and they didn't know what I was talking about.
    Still, I believe Safaricom is not the problem as other people I know who have a BlackBerry on Safaricom haven't experienced this problem.

Maybe you are looking for

  • Can't install upgrade from Acrobat XI Standard to Acrobat XI Pro

    I have Acrobat XI Standard installed on a new Dell Windows 7 PC. I just purchased an upgrade to Acobat XI Pro. I paid $199 and successfully downloaded the installation file from www.adobe.com. When I try to install the package, the installation proce

  • Got a funny smell earlier and burn marks on my hinge (adapter UK/US)

    Hi Everyone Had a bit of a scare earlier at work! Could smell burning in the office, with all the equipment we have it could of been anything but it did seem to stop once I shut down. I don't use the battery anymore as it died a couple of years ago a

  • Creating the spool request for the internal table data

    Hi.. I am little confused with the function module used for creating the spool request. well...I am practicing the ALV report and sending the that report to the spool. I  ve used the FM SLVC_TABLE_PS_TO_SPOOL. this is the way i defined the internal t

  • FLV that won't display

    I created a DW CS5.5 file, (code is below) I embedded an FLV that won't play once the page is on the webserver, although in DW Liveview mode it plays fine. Please advise what I need to change to make this play on the server. The live page link:  www.

  • Setting a flag for tacholimit in SetOutputState in NXT Directcommand function

    Hello, I am trying to control a NXT Mindstorm motor to rotate by degrees through NXT Direct Command function. I have read that tacholimit "specifies the rotational distance in degrees that you want to turn the motor" in the advanced programming guide