Overlapping fields in java web viewer

We are having an issue with SAP Crystal Report, version for Eclipse(java run time). We are using 12.2.217 of the java run time.
We are having an issue with data from one field overlapping the data from another field in the report viewer. These are reports that we have used for a
while and viewing them in a windows activeX viewer without having this issue. In the activeX viewer the fields are truncated. The designer also truncates the
fields. We are using Crystal Reports 2008 version 12.2.0.290 designer.
I have seen suggestions involving the Can Grow option. We were not happy with either the 0 or 1 line options. The 0 option for unlimited can make the reports much longer. The 1 line option truncates on whole words so you can lose a lot more this way. We would prefer truncation of the field like the other viewers handle it.
We had a change to the Style.css file that worked great on the fields, but had some undesirable side effects. Like sub reports and sort controls disappeared. It seems the field css tag is generated at run time, thus not able to address them specifically in the css file.
div
overflow:hidden;
I have attached a couple examples. Any suggestions would be greatly appreciated.

I guess we're not on the same page.
I don't know how a java program running in a browser as an applet, can
access fields in the HTML page that the browser is displaying.
Could you explain how you are able to do this please?
Where/how is the java code being executed that it can communicate with a browser and insert data in an HTML field on a page the the browser is displaying?
Or is your java code running on a server and outputting HTML text that is being returned to a client's browser?
In which case, your question is more about how to do it in HTML . Once you have the correct HTML syntax then its simple to have a program write the needed HTML.

Similar Messages

Duplicated/blurred/overlapping fonted text in web view

We are experiencing an annoying issue with fonted text in web view frames. See the screenshot below:
Look closely at the headline and you'll notice that it seems to be duplicated on top of itself, as if there are two identical headlines on top of each other, a couple of pixels apart. This happening on ALL our HTML text story pages based on this template.
The page is HTML supported by local web fonts, an extremely basic CSS and a jQuery to handle the zoom function (the blue buttons at the top). The idea is that readers of our DPS folio tap on a button on a page to reveal a state in an MSO that contains a web view frame showing the full text version of a story.
The annoying thing is that the HTML looks absolutely fine in Safari and Chrome on my computer, nor in the desktop Content Viewer: the problem only arises in Safari and Chrome (and therefore DPS too) on the iPad 2 and 3.
Has anyone here experienced the same issue? Did you manage to solve it?
Ali

Yes, I'm previewing as a raster folio - no zooming allowed. What made it curious is that when I put the same web files online and viewed them using the standard Safari browser and the Chrome browser on my iPad, I was seeing the same problem. So it seems to be an issue not directly related to DPS.
However, I think I've solved it, thanks to your prompting to keep returning to how the fonts are being addressed. I added the following lines to the <style type="text/css"> section of my HTML header:
h1
font-family: Headline;
font-weight: normal;
I'm not sure why this did the trick: the 'Headline' style for the <h1> tag is already described and associated in the CSS and (I thought) referred to appropriately higher up in the HTML header, but there you go. Perhaps it needed a reminder, I dunno. The other styles didn't need this. I'm such a coding dimbo I haven't the faintest idea what's going on.
Thanks for directing me to the right places!

Java Web Start running JasperReports

The following is the exception that is thrown when trying to compile an .xml report template to a JasperReport object, from an app that has been deployed via the Java Web Start:
dori.jasper.engine.JRException: Errors were encountered when compiling report expressions class file:
C:\Program Files\mozilla.org\Mozilla\DailyReport.java:4: package dori.jasper.engine does not exist
import dori.jasper.engine.*;
* I have deployed the application properly via Java Web Start; however, when running the application it is not able to compile the xml file to a JasperReport object.
* The .java file is created properly; but the app does not seem to be able to find the dori.jasper.engine.*; library.
* I have signed and included the jasperreports-0.5.0.jar (and it's dependencies) with the app, and have put the path to all of it in the Class-Path of the manifest file.
* NOTE: Just FYI, I am able to run this without any problems under netbeans.

Dear Patrick,
Recently I have used iReports for generating report through java & deploy it through java web start.
I had taken all the measures you had mentioned in your previous replies. But I am not able to view the report. ( might be it is not compiliing)
I am using new version of jasperreports-0.5.3.jar
also through console it is running well.
Also it is not giving any errors. can u have any idea about this.
Might be it is silly mistake I have done.
My code for report generation is :
public class SReportA
     public SReportA()
     try
     JasperDesign jasperDesign = JasperManager.loadXmlDesign("/home/ora/iReport/RSENIORITYLIST-A.xml");
     dori.jasper.engine.design.JRBshCompiler theCompiler = new dori.jasper.engine.design.JRBshCompiler();
     JasperReport jasperReport = theCompiler.compileReport(jasperDesign);
     Map parameters = new HashMap();
     parameters.put("uname","admin");
     Connection con=null;
     try
          Class.forName("oracle.jdbc.driver.OracleDriver");
          con=DriverManager.getConnection("jdbc:oracle:thin:@158.144.71.219:1521:dbadp","acom","admin123");
     catch(Exception e)
          System.out.println("Exception in test.jsp "+ e);
     JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport,parameters,con);
     JasperManager.printReportToPdfFile(jasperPrint,"ReportA.pdf");
     JasperViewer.viewReport(jasperPrint,false);
     catch(Exception e){ System.out.println("There is exception here"+ e); }

Unable to launch Integeration Builder - Java Web Start - Unexpected Error

Hi there,
I am not able to launch the Integeration builder. The ESR has no problem and is working fine though.
Here is the exception :- com.sap.aii.ibdir.gui.appl.ApplicationImpl
I have tried below options already :
1. Cleared the java cache under - javaws -logviewer
2. Go into administration and inside Directory --> Java Web Start Administration clicked "Restore archives and generate new sign."
Strange part is some of my colleagues here doesnt have any issue while opening the Integeration Builder. In fact I dont have any such issue in QA and PROD environment. The issue is only in DEV environment. Please advice.
Anshul

Hello,
Usually restoring the archives will help resolve the issue.
If the issue is occurring for just yourself maybe you could check that you are using the correct java version. e.g. for for 7. 1 java version 5
Also please refresh the Java Web Start:
If it's a Windows terminal, select Start - Run - javaws to launch Java Web Start and then clear the cache. File -> preferences ->
advanced -> clear folder button
If you have later versions of Java and doing the
Start -> Run doesn't give you anything, then select Start - Run and type Control and hit Enter. Double-click Java in the list
that displays to view the more up-to-date Java Control Panel. In the General tab, select Settings from the Temporary Internet Files section. Click Delete Files to clear the cache and then log into the Integration Builder again (download will be longer as jars will be cached locally again).
If the problem still remains I would advise to check that the latest patches have been applied for XI_TOOL, and also the other components MESSAGING SAP-XIAFC SAP_XIAF SAP_XIESR SAP_XIGUI
Regards,
Sarah

How to setup Proxy for Java Web Start App ?

I'm having trouble getting Java Web Start to work.
at... http://java.sun.com/docs/books/tutorial/uiswing/14start/compile.html
It tell me...
To test whether your browser can launch an application using Java Web Start, click this link.
http://java.sun.com/docs/books/tutorialJWS/uiswing/14start/example-1dot4/HelloJWS.jnlp
I do that & see Java Web Start try to start but get message...
Java Web Start - Invalid Argument
Unable to launch specified application
An error occurred while launching/running the application.
Category: Invalid Argument error
Could not load file/URL specified: C:\Documents and Settings\Will\Local Settings\Temporary Internet Files\Content.IE5\OP8RSBCV\HelloJWS[1].jnlp
Then... http://java.sun.com/docs/books/tutorial/information/javawebstart.html tells me...
"This situation usually happens when your browser and your copy of Java Web Start have different proxy settings."
I click Start | Programs | Java Web Start | Java Web Start,,, then click File | Preferences | General
My choices are... Proxies: None User Browser _ Manual (User Browser grayed out)
If _ Manual checked then I get...
HTTP Proxy ______
HTTP Port _______
I'm running XP Pro via Wi Fi to a Linksys Wi Fi router to a cable modem... I'm also running Zone Alarm (tried turning it off but no luck)
I don't know how to set up the Proxy stuff... can any one please help me get this set up.
thanks - Will

OK, on my XP Pro system I went to...
Start IE -> Control Panel -> Internet Options -> Connections -> Lan Settings -> Proxy Settings
This is my 'Local Area network (LAN) Settings panel...
- user Proxy server for LAN is checked
- Address is blank
- Port is blank
So do I plug something in here... the ip address of my linksys wi-fi router and a port number or what?
My Java Web Start Preferences won't let me click 'Use Browser' only None or Manual
If I click Manual, I don't know what to plug into the HTTP Proxy and HTTP Port fields...
I tried the ip address of my router... thinking it may have a built in Proxy Server... and port 8080 as indicated by the Help page for the Java Web Start... but no luck.
I really appriceate any help on this...
thanks - Will

Need help to read model node input field attribute present in view - first time developer.

Hello Experts,
I am new to CRM Web UI development.
Presently, I am trying to develop a Guided Activity Page having 2 views.
First view has the field Business Partner Number, I have added model Node BuilHeader and the attribute BP_NUMBER while creation of the view.
The Second View consists of 2 fields from the Model Node BuilHeader, namely First Name and Last Name.
The requirement is to enter the BP Number on the first screen then click on the NEXT button from the Guided Activity buttons, on navigating to the Second View, the Names should auto-populate.
I have Created both views and the GP page, the GP navigation is also happening. Initially the fields were showing Not Bound text in value, so I commented the line in GET_I and GET methods to enable the field and remove the Not Bound text. I have created a custom controller with BuilHeader
I have tried doing this but facing the below problems :
1) When I enter the BP number on the first view and press Enter, the value disappears. How to solve this ?
2) Does clicking on the NEXT button on the GP Navigation trigger a Server Roundtrip ?
3) How to read the context node value of BP Number entered on the first view and populate the Name fields on the second view.
Please help.........

you can take reference from from below code as in above case we use BuilHeaderAdvancedSearch search object, to get current entity.
data: query TYPE REF TO cl_crm_bol_dquery_service,.
query ?= me->typed_context->BuilHeaderAdvancedSearch->collection_wrapper->get_current( ).
Do not remove code from getter setter of fields , it will not clear.
Check with http://scn.sap.com/thread/3391203 , for basic understanding of UI.
Regards,
Harish Kumar

DBMS_OUTPUT.PUT_LINE multi records from PL/SQL procedure to Java web page.

Hello
I will explain the scenario:
In our java web page, we are using three text boxes to enter "Part number,Description and Aircraft type". Every time the user no need to enter all these data. The person can enter any combination of data or only one text box. Actually the output data corresponding to this input entries is from five Oracle table. If we are using a single query to take data from all the five tables, the database will hang. So I written a procedure "SEARCH1",this will accept any combination of values (for empty values we need to pass NULL to this procedure) and output data from all the five tables. When I executing this procedure in SQL editor, the execution is very fast and giving exact result. I used "dbms_output.put_line" clause for outputing multiple records in my procedure. The output variables are "Serial No, part Number, Description, Aircraft type,Part No1,Part No2,Part No3,Part No4". I want to use the same procedure "SEARCH1" for outputing data in java web page.The passing argument I can take from the text box provided in java web page. I am using jdbc thin driver to connect our java web page to Oracle 9i database.
Note1 : If any combination of search item not available, in procedure itself I am outputing a message like "Part Number not found". Here I am using four words ("Part" is the first word,"Number" is the second,"Not" s the third, and "found" is the fourth) for outputing this message.Is it necessary to equalise number of words I am using here to the record outputing eight variable?
Our current development work is stopped because of this issue. So any one familier in this field,plese help me to solve our issue by giving the sample code for the same scenario.
My Email-id is : [email protected]
I will expect yor early mail.
With thanks
Pramod kumar.

Hello Avi,
I am trying to solve this issue by using objects. But the following part of code also throwing some warning like "PLS-00302: component must be declared". Plese cross check my code and help me to solve this issue.
drop type rectab;
create or replace type rectype as object(PartNo varchar2(30),Description varchar2(150),AIrcraft_type varchar2(15),status_IPC varchar2(30),status_ELOG varchar2(30),status_SUPCAT varchar2(30),status_AIRODWH varchar2(30));
create or replace type rectab as table of rectype;
create or replace package ioStructArray as
procedure testsch2(pno in varchar2,pdes in varchar2,air in varchar2,orec in out rectab);
end ioStructArray;
create or replace package body ioStructArray as
procedure testsch2(pno in varchar2,pdes in varchar2,air in varchar2,orec in out rectab) is
mdescription varchar2(150);
mpartnum varchar2(30);
mpno varchar2(30);
mdes varchar2(150);
mair varchar2(15);
mstat varchar2(1);
cursor c1 is select partnum,description,aircraft_type from master_catalog where partnum=mpno and aircraft_type=mair and description like ltrim(rtrim(mdes))||'%';
cursor c2 is select partnum from ipc_master where partnum=mpartnum;
cursor c3 is select partnum from fedlog_data where partnum=mpartnum;
cursor c4 is select partnum from superparts where partnum=mpartnum;
cursor c5 is select part_no from supplier_catalog where part_no=mpartnum;
mpno1 varchar2(30);
mpno2 varchar2(30);
mpno3 varchar2(30);
mpno4 varchar2(30);
mpno5 varchar2(30);
maircraft_type varchar2(15);
mstat1 varchar2(30);
mstat2 varchar2(30);
mstat3 varchar2(30);
mstat4 varchar2(30);
begin
mstat:='N';
mpno:=pno;
mdes:=pdes;
mair:=air;
if mpno is not null and mdes is not null and mair is not null then
begin
mstat:='N';
mpno:=pno;
mdes:=pdes;
mair:=air;
for i in c1 loop
mstat:='N';
mstat1:='N';
mstat2:='N';
mstat3:='N';
mstat4:='N';
mpno1:=i.partnum;
mpartnum:=i.partnum;
mdescription:=i.description;
maircraft_type:=i.aircraft_type;
for j in c2 loop
mpno2:=j.partnum;
end loop;
for k in c3 loop
mpno3:=k.partnum;
end loop;
for l in c4 loop
mpno4:=l.partnum;
end loop;
for m in c5 loop
mpno5:=m.part_no;
end loop;
if mpno2=mpartnum then
mstat1:=mpno2;
end if;
if mpno3=mpartnum then
mstat2:=mpno3;
end if;
if mpno4=mpartnum then
mstat3:=mpno4;
end if;
if mpno5=mpartnum then
mstat4:=mpno5;
end if;
if mpno1=mpartnum then
mstat:='Y';
orec.PartNo:=mpno1;
orec.Description:=mdescription;
orec.AIrcraft_type:=maircraft_type;
orec.status_IPC:=mstat1;
orec.status_ELOG:=mstat2;
orec.status_SUPCAT:=mstat3;
orec.STATUS_AIRODWH:=status_AIRODWH;
end if;
end loop;
end;
end if;
end testsch2;
end ioStructArray;
Expecting your early reply.
With thanks
Pramod kumar.

I want to editable description field in my web dynpro application

Hi expert,
The requirement is to make the Description field editable. However, the container for the dynpro only appears to allow for a certain type of action and is essentially used to display the Line Item details, giving no option to change the Line Item Description.
so i want to editable in this description field in my web dynpro application /SAPSRM/WDC_DOTC_PC_I_BD .
Kindly give me soulation ASAP.
Thanks and Regard's.
Vikash

Thanks for the reply.
The name of the view is V_PC_DOTC_ITM on which we have the records. On each line item there is a description field which is of type (LinkToAction). I want to enable user so that it can change the Description text (I will handle the action). Also, if you have any idea about updating the database table from here as it needs to be updated in BBP_PCPOS table.
-vikash

How to use EVS with different data in each row, in a Java Web Dynpro table?

Hi all,
I am using EVS in a column of java web dynpro table.
Let's say the name, and context attribute, of this column is column1.
It's filled dynamically using an RFC, that uses as input parameter the value of another column, and related context attribute, from the same table (Let's call it column2). Obviously, from the same row. So, in other words: the values of the EVS in column1 of row1, are dependent of the value of column2 of row1. And the values of the EVS in column1 of row2, are dependent of the value of column2 of row2. And so on... Hope i could explain myself ok.
The code I'm using works great for filling the EVS dynamically:
IWDAttributeInfo attrInfo = wdContext.nodeDetail().getNodeInfo().getAttribute(nodeElement.COLUMN1);
ISimpleTypeModifiable siType = attrInfo.getModifiableSimpleType();
IModifiableSimpleValueSet<String> value = siType.getSVServices().getModifiableSimpleValueSet();
value.clear();
if(this.initRFC_Input(nodeElement.getColumn2())){
     for (int i = 0; i < wdContext.nodeRFCresult().size(); i++){
          value.put(wdContext.nodeRFCresult().getRFCresultElementAt(i).getLgort()
             , wdContext.nodeRFCresult().getRFCresultElementAt(i).getLgobe());
In this code, nodeElement is the context row of the table that is passed dynamically to the method when the value of colum2 is changed.
HOWEVER, the problem I'm having is that after executing this code, EACH NEW ROW that is added to the table has by default the same values as the first row, in the column1 EVS. And, for example, if I refresh the values of the column1 EVS in row 2, all EVS values in the other rows are also refreshed with the same values as the ones of EVS in row 2.
How can I make sure each row EVS has its own set of independent values, so they don't mess with each other?
Hope you guys can help me. And please, let me know if I didn't explain myself correctly!
Thanks!

I just did as you said (I think), but it's still having the same behaviour as before (same data for all EVS in the table).
Here´s what I did:
I
In node "Detail" (cardinality 0...n, singleton set to true), which is binded to the table, I created a child node named "Column1Values" wth cardinality 1...1 and singleton set to false.
"Column1Values" node has an attribute called "column1", of type String.
I did the binding between attribute "column1" and the column1 inputfield celleditor in the table.
I created an event called Column2Changed and binded it to the column2 celleditor of the table. I added a parameter called nodeElement of type IPrivateCompView.IDetailElement to this event, and mapped it to the column2 editor in the table so that I can dynamically get the nodeElement that is being affected.
I added the following code to the onActionColumn2Changed(wdEvent, nodeElement) method that gets created in the view:
IWDAttributeInfo attrInfo = nodeElement.nodeColumn1Values().getNodeInfo().getAttribute("column1");
ISimpleTypeModifiable siType = attrInfo.getModifiableSimpleType();
IModifiableSimpleValueSet<String> value = siType.getSVServices().getModifiableSimpleValueSet();
if(this.initRFC_Input(nodeElement.getColumn2())){
     for(int i =0; i < wdContext.nodeRFCresults().size(); i++){
          value.put(wdContext.nodeRFCresults().getRFCresultsElementAt(i).getId(),
                              wdContext.nodeRFCresults().getRFCresultsElementAt(i).getDesc());
And with this, I still get the original problem... When the EVS of one row is updated, ALL other EVS of the table get also updated with the same values.
What am I missing? Sorry Govardan, I bet I'm not seeing something really obvious... hopefully you can point me in the right direction.
Thanks!

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

Adding an ABAP Web Dynpro application to a Java Web Dynpro screen

Hey fellow SAPers
This is an interesting one .........
We have developed a bespoke ABAP Web Dynpro screen that we want to include into a tabstrip in a Java Web Wynpro application. We have managed to do this by inserting an iFrame into the tabstrip, and then passing the UWL of the ABAP Web Dynpro app. This works. However, life is never that easy and of course whenever the screen is refreshed, the ABAP WD app is called again and so any changes to the data on the ABAP screen are lost as the data in the ABAP app is re-selected and the data returns to it's original state.
Does anyone know:
- of another way to incorporate an ABAP WD screen into a Java WD screen (as a tabstrip)
- how to de-activate a Java view so that the view containing the ABAP WD app is refreshed (i.e. the window is refreshed), the view is not refreshed and the ABAP app is not re-called .....
- any other ideas ....
of course, we could re-develop the same screen in Javam, but that would be too easy
Looking forward to your responses
Jon

>
> Hi Jon,
>
> First of all Iframe is not officially supported until 7.01 version.
I believe it is deprecated in 7.01 and re-supported in 7.02
[7.01 IFrame Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
[7.02 IFrame help|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
>
> Would you not use Portal for that and incorporate two iViews in a Page?
I'm guessing you want to show this within the WDJ app not above, below to the left, right...
This is a very very difficult thing to do - I'm guessing that you are not actively passing data into the URL of the WDJ IFrame, but just have "decorated" the WDJ app with the a statically linked IFrame. In this case the only thing you have to tie the two together is the user id that you are using - and potentially the time the app was launched. You could in theory use a shared memory area (watch out for multi app server environments) to store the state of the app in case it got refreshed... but this is not a simple thing to do...
Consider if it is absolutely necessary to enhance the WDJ in place - hopefully you can just replace it with a WDA when you install EhP5
Good luck,
Chris

How to create table in interactive form via Java Web Dynpro

Hi,
How to create table in interactive form via Java Web Dynpro ?
Any online tutorial / example ?
Thank you.
Regards,
Eric

Hi Eric,
Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
Hope it will solve your query.
Regards,
Vaibhav Tiwari.

Issue with multiple digital signatures disabling fast web view

Hello, I'm using acrobat 9.1 pro and have some questions regarding an issue using multiple signatures on a pdf.
Why am I asking the question below? My job involves preparing pdf's for submission to FDA. The FDA requires, among other things, that electronically submitted docs have fast web view enabled.
I am currently exploring ways of using digital signatures to sign pdf reports and still make sure they are FDA spec compliant. My issue involves a document that would have multiple signature fields. What I do is create at least two signature fields in the doc and then save and optimize while enabling fast web view. When I sign the first box and save, the file retains the fast web view status. Yet, when I apply and signatures past the first one, the file is subsequently set to fast web view off without any obvious way of turning it back on. I am confused as to why it gets disabled only after the second, and not right after even the first one was signed. And, of course, I would like to know if it is possible to maintain fast web view and how to do it. I'll gladly accept "tinkering under the hood" of the file suggestions if they exist as well.
Please let me know if anything is unclear or you need further information.
Thanks for your time and help.
~Vlad

Hi Vlad,
Michael actual had the correct answer. The purpose of a "Linearized" file (i.e. a file that has been Optimized for Fast Web View) is to get the first page to display as soon as possible so you can start reading without waiting for the rest of the file to download. As an aside, the designated first page doesn't necessarily have to be page 0 (PDF's use a zero based counting system for pages), but usually it is. To quote the PDF specification, "The primary focus of Linearized PDF is optimized viewing of read-only PDF documents. It is intended that the Linearized PDF be generated once and read many times. Incremental update is still permitted, but the resulting PDF is no longer linearized and subsequently is treated as ordinary PDF."
When you sign a PDF file the first time the Save process is a "full save", that is the entire document is rewritten so there are no more than two %%EOF (end-of-file) markers in it. The first EOF designates which page to show first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second (or subsequent) signature the file is saved as an "incremental save" and all of the new data is tacked onto the the end of the original file. This is so you can do a rollback to the previous signed version and allows Acrobat/Reader to check the integrity of each signature independent of any other signatures. It's the incremental save that breaks the linearized optimization of the file.
Steve

What is the right way to display a table in Java web dynpro using a node.

Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt.

How to call Xcelsius in Java Web application without OpenDoc

Hi,
We require to call Xcelsius Dashboard from a Java Web application. We cann't use OpenDoc function as result of some client preferences/restrictions
Please let me know, what would be the other method to call the Xcelsius Dashboard from a Web application.
Regards,
Sachin

Xcelsius docs are in swf format. You could probably just host them without security and view with flash.

Overlapping fields in java web viewer

Similar Messages

Maybe you are looking for