Overtime posted from HR for the period

Hi
I have created on report from HR ovetime posting for the period.
SELECT ppdhd~docnum "Document number
          ppdhd~doctyp "Document type
          ppdhd~bldat "Document date in document
          ppdhd~budat "Posting date in the document
          ppdhd~runid "Number of Posting Run
          ppdhd~evtyp "Run type
          ppdhd~blart "Ref Document type
          ppdit~hkont "Gl Account Number
          ppoix~pernr "Personal Number
          ppdit~kostl "Cost Center
          ppdit~kstrg "Cost Object
          ppoix~waers "Currency
          ppoix~betrg "HR Payroll Amount
          ppoix~lgart "Wage Type
INTO CORRESPONDING FIELDS OF TABLE i_output
FROM    ppdhd
INNER JOIN ppdit ON
          ppditdocnum EQ ppdhddocnum
INNER JOIN ppdix ON
          ppdixdocnum EQ ppditdocnum AND
          ppdixdoclin EQ ppditdoclin
INNER JOIN ppoix ON
          ppoixrunid EQ ppdixrunid AND
          ppoixtslin EQ ppdixlinum
WHERE   ppdhd~bldat IN s_bldat AND
          ppdhd~budat IN s_budat AND
          ppdit~kostl IN s_kostl AND
          ppdhd~bukrs EQ p_burks AND
          ppdit~hkont IN s_hkont AND
          ppdit~prctr IN s_prctr.
from the above query I am getting the result in duplicate data with different runid.
Please let me know that I have to do some other fillteration for this one.
Regards
Sebastian John

Thanks,
from some other table also I needed to take or not?
Regards
Sebastian John
Edited by: Sebastian John on Dec 8, 2009 12:31 PM

Similar Messages

POSTING ERROR-MESSAGE POSTING BALANCE NOT CLEARED FOR THE PERIOD 2/2008A

Hi
I have a problem in payroll posting. While posting for one employee's persn number rejected and gave a message as Posting Balance not cleared for the period 2/2008A. To come out of the problem I changed the Payroll status record using pu03 changed the Erliest Retro date as 01.06.2008. Again tried to post but not posted again same Message displayed. After changing the Erliest Retro record I have not run the payroll for the particular employee. Is it required to run the payroll for the employee after changing the status in PU03. Request to guide on this
Thanks
EKP Yadav

Hi there
The posting may be out of balance for the employee because their credits dont equal their debits...
Do a test posting for the employee with the log on, this will tell you what amounts are being posted - and should give you an inidcation of where the balance is not cleared...
Yes, you would have to re-run the employee if you'd changed the retro date in PU03, but I dont think that will fix your posting problem....Should the employee have retroe'd?
From what I have seen, just changing the control record doesn't usually fix an out-of balance..there is usually another reason....eg wagetype incorrectly posting to the wrong number of accounts....or a missing wagetype on the employee (eg bank details...no /559 for the net pay to go to).
Cheers
Mary

Restric materails from sales for certain period

Dear Gurus,
There are some materials that should be in quality inspection for specific period and after that period it should automatically release for unrestriced use stock. Basically we want to restric some material from sales for certain period and after that period it should be automatically avoid that restriction.
Please provide me a possible solution for this.
Thanks,
Regards,
Chameendri

usually a human changes a status with a material movement, e.g. thru usage decision if Quality module is used.
there is nothing in customizing or master data where you can say the material becomes saleable after 3 day lying in the shelfs.
the GR processing time can be extended to 3 days, so ATP can know that the material is not immediatly available after goods receipt.
But this does not change a stock status from blocked to unrestricted (or quality to unrestricted).
If you want this, then you have to write a report that checks how long the batch is already in Q-status and then calls a BAPI for posting a goods movement to change the status. and this report can then be scheduled to run in background once a day.

Event GR Posted is denied for the DBM Order - External service procurement

Dear Experts,
We are facing the below mentioned issue while trying to perform goods receipt for external service procurement.
Error - "Event GR Posted is denied for the DBM Order -------XXX"
The error message is raised when the tracking number is maintained in the Purchase order of External servce,
If we remove the Tracking order (DBM Job order number) from Purchase order and then perform Goods receipt (MIGO) then the error does not exists.
Request you to help us with suggestion.
Regards,
T.R.S,Praveen

Hi Sachin,
Thank you for your valuable feedback.
Requirement Tracking number in Purchase order item screen. Field name - BEDNR.
Please note that the job order number is not manually updated by us. It is automatically updating in PO line item through Purchase requisition details as per standard behavior.
If we perform goods receipt then we are getting error message as "Event GR Posted is denied for the DBM Order -------XXX".
Goods receipt is working properly if we remove the Job order number in tracking order field in PO.
Regards,
T.R.S.Praveen

Can we do cancellation of invoice for the period preceding the transaction

Hi All,
Can we do cancellation of invoice for the period preceding the transaction after the closing MMPV?
Thanks,
Praveen

Hi,
Unfortunately the answer is no. Two reasons for it.
a. The period for which you want to post is already closed
b. The period for which you want to reverse the invoice falls before the period your invoice is created (as I have understood your question) which is not allowed....
Hope this helps
Thanks
Mukund S

Posting run request for future period; check your entry message no.AA697

Hello Guru's,
I have below error while Depreciation run in T.Code AFAB
"Posting run requested for future period; check your entry" message no.AA697
Request help
thanks in advance
Regards
Chintamani

Hello Chintamani,
Why you want to post the depreciation for future period?
Is the future fiscal year in open or is the posting period open for that? If no, please open that period with AJRW T code if you want to post the depreciation for future period but it is not recommendable.
Check the posting period once again because the given posting period belongs to future year? So please do re-chk and give correct period according to your current fiscal year.
You can get your fiscal year details and assignment of fiscal year variant to the co,code details in OB29 and OB37 t codes respectfully.
Check the OSS Note: 1150235 - Preventing depreciation posting run for future
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S

Broadcasting a packet to the echo post and listen for the replys

how to write code for broadcasting a packet to the echo post and listen for the replys ?

Not unusual to get charges, even receipts from the app store, a month later. I sometimes scratch my head trying to remember back to when I MADE that purchase

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

My itunes files were deleted. I was able to use an old back up file to restore some but new downloaded purchases from iTunes for the past 5 months weren't in the back up. How do I get those back since I've paid for them one before and use the same account

My itunes files were deleted. I was able to use an old back up file to restore some but new downloaded purchases from iTunes for the past 5 months weren't in the back up. How do I get those back since I've paid for them one before? Can you redownload? If so, how?? Please help as I'm missing over 500 previously paid for and downloaded iTunes song purchases.

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

10yr customer switching to AT&T from Verizon for the Nokia 900 Lumia

So I've been with Verizon for almost 10 years. That's about $20,000 to $30,000 I've given them. I know that's nothing to a massive company, but I also know that it's not peanuts either. I have been very happy with Verizon during those years (though I have gotten sick of every single other company always having nicer, better, cooler phones). But their service has been good, as well as the customer service. However, I have gotten to a point where I don't like the android phones at all, and don't really like iphones either. I've been sitting on an old HTC TP2 and now am out of contract. I was hoping Verizon would get the 900 Lumia, but it has now been announced as AT&T only. Why does Verizon always have to be the last company to get any sort of innovative phones?
I am about 90% sure I will be switching to AT&T. I don't like the way Verizon clings to their droids, how their salespeople only push one or two devices, and I don't like how they handled their iphone introduction (instead of innovating, they just jumped on the bandwagon a few years too late).
I know that the people interested in Windows Phones are a small minority, but if we can get this thing to trend it might get someone's attention. At worst, make them consider bringing in some new phones. I don't want the dumbed-down 700 series Nokia phone.
Anyone else considering a switch to AT&T?

They did it once already.
On 12.01.2012 20:36, jcb193 wrote:
RE: 10YR CUSTOMER
SWITCHING TO AT||AMP||T FROM VERIZON FOR THE NOKIA 900 LUMIA
created by jcb193 in Windows Phone Discussions - View the full
discussion

Using a "Posting Key" relevant for the calculation of sales

Hi All,
if I make a posting by F-02 using a "Posting Key" relevant for the calculation of sales, I wonder: in which table SAP registers the data of sales?
Is there the way to modify the relevance for sales of that posting?
Thanks

Hi
As far I know, sales figures are getting updated in the following summary tables:
KCN1 for Customer related.
LFC1 For Vendor realted.
Regards

Creative zen V+ still not working after coming back from assistance for the second ti

hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
Good luck,
Dale

How do I obtain the answers to my security questions if I am attempting to download purchase from iBooks for the first time?

How do I obtain the answers to my security questions if I am attempting to download purchase from iBooks for the first time?

Click here for information. If you've forgotten the answers to the security questions and can't get them emailed to you for some reason(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(85504)

Free at last from Word for the Mac 2011

     I used Word for 20 years but when I moved on to Lion, I found the 2011 version
of Word for the Mac to be a muddled, useless ball of snakes. I switched to Apple's Pages
and was pleased with its intuitive and productive arrangement. What a difference!
    With Pages, it is especially easy to produce items that are a mix of text and
drawing elements (e.g., borders). Unllike the disaster of Word's Ribbon, it has an
area at the top where you can display (from a wide array of options) those
choices of production tools you wish to have available.
     I think if you give Pages a try, you'll never go back to Word.

They did it once already.
On 12.01.2012 20:36, jcb193 wrote:
RE: 10YR CUSTOMER
SWITCHING TO AT||AMP||T FROM VERIZON FOR THE NOKIA 900 LUMIA
created by jcb193 in Windows Phone Discussions - View the full
discussion

WIP Closing entries not posted in FA for the month of March

Dear Team,
WIP Closing entries not posted in FA for the month of March -2010. Please check and revert immediately. Print screen and KKAO -WIP Report given below for your reference. Same issue is there for FISHER also.
Regards,
Suma Nalluri.

thks

Overtime posted from HR for the period

Similar Messages

Maybe you are looking for