Overwrite CRM_Order Desc. with Para. from FBDSWP_ALERTS_SLF_MSG_SUBMIT

Hello Colleagues,
i have setup the ccms monitroing with an autoreaction Method in Solution Manger.
Method: Serv_Desk_Mess_on_Alert with FB DSWP_ALERTS_SLF_MSG_SUBMIT
as Paramter i have used Component, Destination, Keyuser
everythings works fine for creating CRM_Order in solution Manager also the Field "Reported by" is filled wit the value from Parameter Keyuser.
But i would like to have a selfdefined Description in the Short Description of the Ticket. So i tried to use Paramter Subject as proposed in OSS 970385 with e.g. $SID and $Object but description is in any case filled with Yellow: or RED: and the name of the ccms Node. e.g. YELLOW: Status.
only in the overview Tab i can see the full description with Jobname and the origin of the Ticket.
Has anyone successfully changed the Value of the Short description in the Ticket created by FB DSWP_ALERTS_SLF_MSG_SUBMIT ?
Thanks for any hints.
Thomas

Similar Messages

Hi, I had a clear up of contacts from my iphone but then when I synced the phone they all came back? how do I overwrite the sync with my updated contacts?

Hi, I had a clear up of contacts from my iphone but then when I synced the phone they all came back? how do I overwrite the sync with my updated contacts?

There may be several that were bought with your Apple ID. but somewhere in the updates there must be one associated with that other ID.
You can update one by one, until you find the one that requires the other Apple ID.

Combining relation facts with dimensions from an Essbase cube

Hi!
I am having trouble combining relational measures (from EBS) with dimensions from an Essbase cube. The dimensions that we want to use for reporting (drilling etc) are in an Essbase cube and the facts are in EBS.
I have managed to import both the EBS tables and the cube into OBIEE (11.1.15) and I have created a business model on the cube. For the cube I converted the accounts dimension to a value based dimension, other than that it was basically just drag and drop.
In this business model I created a new logical table with an LTS consisting of three tables from the relational database.
The relational data has an account key that conforms to the member key of the accounts dimension in the Essbase cube. So in the accounts dimension (in the BMM layer) I mapped the relational column to correct column (that is already mapped to the cube) - this column now has two sources; the relational table and the cube. This account key is also available in the LTS of my fact table.
The content levels for the LTS in the fact table have all been set to detail level for the accounts dimension.
So far I am able to report on the data from the fact table (only relational data) and I can combine this report with account key from the account dimension (because this column is mapped to the relational source as well as the cube). But if expand the report with a column (from the accounts dimension) that is mapped only to the cube (the alias column that contains the description of the accounts key), I get an error (NQSError 14025 - see below).
Seeing as how I have modeled that the facts are connected to the dimension through the common accounts key, I cannot understand why OBIEE doesn't seem to understand which other columns - from the same dimension - to fetch.
If this had been in a relational database I could have done this very easily with SQL; something along the lines of select * from relational_fact, dim_accounts where relational_fact.account_key=dim_accounts.account_key.
Error message:
[nQSError: 14025] No fact table exists at the requested level of detail
Edit:
Regards
Mogens
Edited by: user13050224 on Jun 19, 2012 6:40 AM

Avneet gave you the beginnings of one way, but left out that a couple of things. First, you would want to do the export of level zero only. Second, the export needs to be in column format and third, you need to make sure the load rule you use is set to be additive otherwise the last row will overwrite the previouse values.
A couple of other wats I can think of doing this
Create a replicated partition that maps the 3 non used dimensiosn to null (Pick the member at the top of the dimension in your mapping area)
Create a report script to extract the data putting the three dimensions in the page so they don't show up.
Use the custom defined function jexport in a calc script to get what you want

Transport Table with Data from Development to Quality

Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).

Check the delivery class assigned to the table. Please see the documentation
Delivery class
    The delivery class controls the transport of table data when installing
    or upgrading, in a client copy and when transporting between customer
    systems. The delivery class is also used in the extended table
    maintenance.
    There are the following delivery classes:
    o   A: Application table (master and transaction data).
    o   C: Customer table, data is maintained by the customer only.
    o   L: Table for storing temporary data.
    o   G: Customer table, SAP may insert new data records, but may not
        overwrite or delete existing data records. The customer namespace
        must be defined in table TRESC. (Use Report RDDKOR54 here).
    o   E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o   Classes A, L and C: No data is imported.
o   Classes E, S, and W: Data is imported. Exisitng data records with
     the same key are overwritten.
o   Classe G: Data records that do not exist are inserted, but existing
     data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o   You cannot transport the entered data with the transport link of the
    generated maintenance interface for tables of delivery classes W and
    L.
o   When you enter data, there is a check if this data violates the
    namespace defined for the table in table TRESC. If the data violates
    the namespace, the input is rejected.
Thanks,

Overwriting a record with part of same primary key

Hello Everyone,
Could anyone please give a suggestion about how to overwrite the record with part of same primary key?
I have 5 key fields.
A1
A2
A3
A4
A5
I have to overwrite the record if A5 changes with same A1 A2 A3 A4.
I cannot take off A5 as part of primary key. If I use modify or insert, its creating a new record with the new A5. But I am still having the old record in the table (with old A5), which I don't want it to be there.
Thank you,
Rushi

hi,
That's right.
u have to delete record from database table .....
then u can add a new record...
use delete <database_table> from table <internal_table>

Com.sap.portal.navigation.masthead.par from Portal 7.0 to 7.30 deployment

Hi all,
I must to deploy the "com.sap.portal.navigation.masthead.par" from Portal 7.0 to Portal 7.30
I'm doing the following steps:
- Convert .par to .ear
- Import .ear to NWDS 7.30
- Deployment perspective > Import > File System > com.sap.portal.navigation.masthead.ear > Start
Results log:
S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed:           0
Deployed with warnings:           0
Failed deployments:           1
~~~~~~~~~~~~~~~~~~~
[ERROR CODE DPL.DCAPI.1031] AllItemsAlreadyDeployedValidationException.
Reason: ASJ.dpl_dc.003456 All batch items are marked as AlreadyDeployed because of Version check.
1. File:D:\Documents and Settings\corellavpd\Escritorio\com.sap.portal.navigation.masthead.ear
+     Name:com.sap.portal.navigation.masthead+
+     Vendor:sap.com+
+     Location:SAP AG+
+     Version:1+
+     Deploy status:AlreadyDeployed+
+     Version:LOWER+
+     Description:+
+          1. Already deployed component has version:7.3005.20110929162215.0000+
How can I deploy in Portal 7.30 an older version of "com.sap.portal.navigation.masthead.par" ?
Thx!
M.
Edited by: ALL NEW Arinso on Nov 17, 2011 12:54 PM

Hi Detlev,
Thanks so much for your reply. Regarding "Create Portal Archive (EAR File)" everything is understood, thanks! In NWDS 7.3 everything must be deployed via .ear file
Regarding the libs... yes, of course I know I compile the sources against some libs Then, I'm gonna type it an example:
- NWDS 7.0 > import com.sap.portal.navigation.masthead.par
Everything is ok and working. Now, the same in 7.3:
- NWDS 7.30 > import com.sap.portal.navigation.masthead.par > LogInRedirect.jsp > exactly the same code as NWDS 7.0 (of course), but with errors in lines:
<%@ page import = "com.sapportals.portal.navigation.*" %> >>> The import com.sapportals.portal.navigation cannot be resolved
<%@ page import = "com.sapportals.portal.prt.runtime.PortalRuntime" %> >>> this is resolved correctly into SAP_EP\resources\prtapi.jar
I understand I must to add the corresponding libs for "com.sapportals.portal.navigation.*" to be used... but how I could know which one and where is located? I hope I'm explaining myself clear...
Thx!!
M.
Edited by: All NorthgateArinso on Nov 23, 2011 4:47 PM

Strange Problem with PAR deployment.

Hi Everybody,
I am undergoing with the strange problem with PAR deployment. When I am deploying any Par file its going successful but when again If I am changing this same PAR file in NWDS and deploying it ... its deploying but not showing the updated deployment version. To see the updated version, every time, I have to go Portal->System Admin->Support->Admin Console and DELETE the existing PAR file. But this procedure takes too time to work on each and every time. Can you help me with some new concept where the new deployed version will get updated on previous one without any manual process or if this something related to cache problem then how to work out?
Thanks,
Roshan Gupta

Hi,
If it saves you time you can also deploy from here:
.../irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.system.console.ClusterAdminConsole
In some cases (rarely) I observed the behavior you described above.
In thoes cases after deploying the file I click the "clean" button on the bottom, since after the deployment it contains the name of the par you just uploaded it'll save you the time of looking for that par to earase.
After that you have to deploy the par again, but again it's allready in the browse console box.
Best Regards,
Nadav.

Error in deploying the par from NWDS

Hello,
I am not able to deploy a par file from my NWDS, whereas I am able to deploy the same par from another machine which is in the same network. The error thrown in my machine in the file sap-plugin.log is given below. Kindly help to solve this issue
[17.01.06 / 14:04] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
java.io.IOException: Server returned HTTP response code: 407 for URL: http://212.140.143.165:57100/irj/servlet/prt/portal/prteventname/upload/prtroot/com.sap.portal.runtime.system.console.archiveuploader?login_submit=on&j_user=administrator&j_password=admin123&j_authscheme=default&uidpasswordlogon=log on
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:800)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:361)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:433)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:220)
Regards,
Rukmani

Hi Rukmani,
407 is "Proxy Authentication Required", which sounds like you are using a proxy and on the other machine, the network access to the portal works in fact different or the authentication mechanism is different.
This is hard to elaborate remotely...
Hope it helps
Detlev

Error while posting a sales order created with reference from contract for

Hi,
I am posting a sales document( Type: WA) created with reference from contract document( type wk2) for delivery. The item category in the sales order of the Item is WAN. On posting this document for delivery I am getting the error as "Item category WAN is not defined". Please help me out how to resolve this issue.
Thanks
Jayant

Hi Jayant,
I think its value contract releated error,
You suppose to check material item category group through T.code-MM02 into sales2 tab and maintain VCIT,
and do item category assignment through T.code- VOV4.
plz.maintain like that,
WK2 -          -VCIT-         -           - WAN(contract item category),
wk2 -          -        -VCTR-          - WAN((contract item category),
you should also maintain same against your standard Sales Document type and for Standard Item category into VOV4,
WA(standard docu.type) -VCIT-                             -                -TAN(your standard docu.type item category),
WA(standard docu.type) -         -VCTR(item usage)-              -TAN(your standard docu.type item category),

Unable to upload the PAR from NWDS

Hi ,
I am unable to upload the par from NWDS as it is throwing the error "Unable to upload"
I have done the proxy settings in NWDS.
can any one tell me is there any other settings i have to do in NWDS.
Thanks
Ajay

Hi Ajay,
Have you copied the NWDS installed stuff from other system and working on that?
Anyway, you can go about this way to upload your par.
Goto System Administration -> Support -> portal runtime -> Administration console -> Browse and add your par -> say upload. Thats it and your par is uploaded:-).
Hope it helps.
Regards
Deepa
Pls reward points for helpfull answers.

TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Safari 6.0, what happened with option to open with windows from last session?

Made the upgrade from Snow Leopard to Mountain Lion and realized that I don't longer have the option to open Safari with windows from last session (Preferences->General). The option has been removed:

They don't. I can access them by history ->reopen all windows from last session, but that's not what I want.
Does anybody else have this problem or is it just me that lost that option on Preferences -> General?

How do i set up a slideshow with pictures from multiple iphoto libraries?

How do i set up a slideshow with pictures from multiple iphoto libraries? One library is in my Macbook Harddrive, the other 2 libraries are in an external harddrive. Thank you!!

You can't, simply. An iPhoto Slideshow can only draw from a single library, so you'll need to get all the images into one.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $99
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Overwrite CRM_Order Desc. with Para. from FBDSWP_ALERTS_SLF_MSG_SUBMIT

Similar Messages

Maybe you are looking for