Overwrite files in content

I bought myself a copy of BioShock Inifinite recently, and its seems i bought it in Russian.
I found out that i needed to download an 'INT' file with the translations in thatd work, and it said to put them into the Contents folder of the game. It seems though that i keep getting a red 'X' symbol.
I am the Admin, and have Root access. Any help please? Just need to know how to overwrite the files with the ones i have got now.

Hi,
you can use this code:
IResourceList resList = folder.getChildren();
RID fileRid = RID.getRID(kmFolder + "/" + element.getFilename());
IResource fileRes = factory.getResource(fileRid, context);
if (fileRes != null) {
if (!resList.containsResource(fileRes)) {
IResource newResource = folder.createResource(element.getFilename(), null, content);
instead of my createResource you can probably use the copy method.
Best regards,
Christian

Similar Messages

Recover a single file in Content Services

I've been asked to document how we would go about recovering a single file in Content Services. The Trash/Archive angle I'm clear on, but what about an extreme case. Lets say that someone created a file, trashed it, emptied the trash, and then it expired from the Archive before the user realized that they needed the file.
Is it possible, and if so how would one go about getting the file back assuming that there is a full db backup once a day?
Would enabling BFILE aging help? If so, how?
On a related note: If archive is set to expire content after 1 month, but BFILE aging is turned off, when does deleted content get purged from the Archive? It's not 1 month, as I have deleted files in the Archive going back to January.

Archive expiration and BFile aging are orthogonal. BFile pushes the LOBs of documents that are in the archive to bfile. Archive expiration deletes files from the archive after the configured time. If this is not the behaviour you are seeing please file a TAR and they can help check whether your system is configured correctly or if you are running into a bug.
regards,
-sancho

Java.lang.Exception: Overwriting file

Hi All,
We are having some trouble with one of our interfaces where XI creates files in append mode and gets the filename from the Payload. From last couple of days, we are getting the below error for some reason. There are no other extra config setups in the file CC.
Any help to figure out the issue would be highly appreciated.
2008-08-12 14:04:56 Error Attempt to process file failed with java.lang.Exception: Overwriting file '
host\folder\otci001\Archive\08122008_140453_OTCI001.txt' not allowed due to configuration flag
2008-08-12 14:04:56 Error Exception caught by adapter framework: Overwriting file '
host\folder\otci001\Archive\08122008_140453_OTCI001.txt' not allowed due to configuration flag.
Thanks,
AJ.

HI,
Once the file is appended, are you doing any further processing with file. because the error "not allowed due to configuration flag" and as youhave said its not for al the messages indicates to single point.
If the attempt to append the data in file if in case that is in processing and have locked with some other process flow marked after XI...
You may also need to look into the FTP log details...for more details
Thanks
Swarup

Windows File CS Content Crawler - How to change crawl method?

Hi,
I have encountered an odd issue. I am using a Windows File CS Content Crawler to pull in some PDF files from a remote folder.
However I noticed the Windows File CS Content Crawler is crawling in the document title rather than the actual PDF filename.
I have checked the admin screens and I cannot find any way to tell my Windows File CS Content Crawler portlet to grab filenames and use these as the file display name when crawled in.
The business clients do not use the document title and meta features and will not use them in the future so the way the current Windows File CS Content Crawler portlet crawls documents into the portal will not work as most will not have a document title or will have some default internal name.
For example the PDF documents I am crawling in have Document Title's that have no relevance to the document filename.
We are only interested in the filename and not the document title (however we may use the field in the future for meta information). Apart from doing some development work to make a custom crawler is there any other way to change the behaviour of the Windows File CS Content Crawler.
I had to go into each document property in portal and modify the name field to the correct filename as it was using the value found in the Document Title field (incorrect).
This seems wrong to me, I can understand using the meta data information contained in files to do the crawling and make searching better however how do you do this with a PDF file that you cannot search against inside portal anyway?!

You can acomplish by changing the Global Document Property Map.
I don't have the specific screen in front of me so this is from memory.
Change the Name property to File name
Change the Title property to File name
You might have to experiment a bit with some test documents.

File Sender Content Conversion: Help needed

Hello Experts,
i need help with file sender content conversion:
i have a file which looks like this:
12329460 24.01.09/07:01 167     Y010122851 136086 43300007            E70115 1L2_96_1
12329660 25.01.09/07:02 157     Y010122851 136086 43390007            E711J5 1L2_96_1
as you can see 8 fields, separated with whitespaces
and i want and xml file which looks like this:
<DT_DATA_FILESENDER>
<Recordset>
      <Data>
        <field1>12329460</field1>
        <field2>24.01.09/07:01</field2>
        <field3>167</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43300007</field6>
        <field7>E70115</field7>
        <field8>1L2_96_1</field8
     </Data>
      <Data>
        <field1>12329660</field1>
        <field2>25.01.09/07:02</field2>
        <field3>157</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43390007</field6>
        <field7>E711J5</field7>
        <field8>1L2_96_1</field8
     </Data>
</Recordset>
Would you please let me know how the datatype has to look like?
And especially how the FCC has to be configured for this scenario?
Thanks in advance,
Chris

> With fixed lengths i get it working,
>
> but with de fieldseparator 0X09 it does not work,
> would you please tell me the complete FCC config not only the fieldSeparation line?
Well Christian,
There is one thing, eithere you can use fieldSeparator or fieldFixedLengths you can not use both together. So in your case do not use fieldSeparator.
The complete FCC is almost same as given in the blog in my previous reply. See the final output in that blog and create your data type accordingly. e.g.
Recordset
------Item 0...unbound
--------Field1 0..1
--------Field2 0..1
--------Field3 0..1
--------Field8 0..1
Regards,
Sarvesh

HT1766 can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Hi sandexpress,
As Ocean20 indicates, you want to make sure that you have automatic syncing turned off. In iTunes Preferences under Devices, make sure you have "Prevent iPods, iPhones, and iPads from syncing automatically" checked. Then connect each iPhone, and make sure that "Manually Manage Music and Videos" is checked on the Info page for each of them. Then go into each page for each device, and select what you want to sync to that particular device. (you would do this one device at a time - complete the steps for one of the phones, then connect the next one and do the same thing).
With this kind of setup, you can modify what will sync at any given time for a particular device once you have connected it to iTunes, but before you click on the Sync button at the bottom of the screen. If you want to change some sync options on a particular device, you would just go into the page you wanted to change (Music, Photos, Apps, etc.), make your changes, and then Sync.
If you do not have any changes, you can just hook up the phone and click on Sync.
Hope this helps.
Cheers,
GB

Copy any kind of file from content server to network directory

Helli All
The question:
I nee to copy any kind of file from content server to any network directory.
Explanation
1. transaction CV02N
2. There is attached file for a document in tab "Document data/Original"
3. This file stored in content server
4. I wrote program code that creates path of the stored file that finally looks like
http://cont:8888/ContentServer.dll?get&Version=.....*...&compid=app1.doc
where app1.doc is file's name and I have to copy this file into network directory.
The problem is that this URL open the file instead of just pointing to him
so that no function or method can't see this file and as the result I got message that
the file doesn\t exist.
Please, advice.
Regards,
Daniel.

many many thanks for ur help. i really did not check the URLClassLoader properly.
but i would like to hear a little more from u. i have another question. here in this code (provided earlier), i searched for attribute values in the manifest file, then again i load the required class file from the very url. is it not good to retrieve the whole jar file first, and then check attribute values inside manifest file and load the required class files from that jar file that is already downloaded without going to that url again? how can i do this?

Windows File CS Content Crawler - Permission Issues

Hi,
Having a strange problem with a Windows File CS Content Crawler.
We have setup a shared directory on a server (on the same subnet/network as the portal server) where users drop their files (Word, PDF, Excel etc).
We have a Content Crawler job that crawls the files into Knowledge Directory, we then display the documents in a portal on one of our communities.
When an administrator level user clicks on the document link in the portal, the document is opened correctly i.e. you get a prompt to open or save. When a normal non-admin user clicks on the document link they receive the following error:
Error - Gateway was not able to access requested content. If the error persists, contact your portal administrator.
When I reviewed PTSpy I found the following message:
"user xxxxx does not have access to object id=232......."
Anyone experienced the above and know how they resolved this?
Thanks in advance,
Tahir

This is a permission problem, most likely on the data source that the crawler is using. Open the data source you used to create the crawler and see if its ID is 232. If it is, then you need to add whatever users/groups that should have access to the documents to the security ACL for the data source object. That will fix the problem.
Does the error also say what class id the object is? That would let you determine exactly which object is causing the problem if it is not the data source.
DJ Dewey | VHA Inc. | [email protected]

...file Sender content conversion 'lastFieldsOptional' error

Hi All,
I am working on a File Sender content conversion--> flat file to XI.
it's fixed length field all the rows with same column.
090627 344535AFDFG+GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG+GBP45434 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG-GBP45434 ASDSSD GFD dFSSGFD 6757532
**EOF**
I am sucessfully able to handle the file if i remove "**EOF*" from incoming file. But i get "lastfieldsOptional" error with "*EOF**"
>
Parameters-
     Recordset Structure - ROW,*
     Recordsets per message - *
    ROW.fieldFixedLengths - 6,8,20,10,30,1,3,1,11,1,11,6,10,10,20,10,10,2,6,6,2,6,6,3
    ROW.fieldNames - INV_DATE,INV_NO,PAYMENT_REF,CUST_NO,CUST_NAME...etc etc
   ignoreRecordsetName - true
There are parameters available to ignore Last field(last column) of a Row/Rocerdset
but how to ignore the last row of the file.
Plz suggest some parameter to ignore the last row/field of the file.
Regs,
Ansh

Ansh,
.lastFieldsOptional is obselete and you cannot use. Please see sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
The best thing comes to my mind is use:
.keepIncompleteFields as YES
Also give a try with:
.missingLastfields as add
So with this I think your last line in the file will read into XI. But the value of last line is **EOF**. So the length is 9. Since your the first two fixed lengths are 6 and 8. You will have these values as ***EOF and ***. So while mapping you can use doesnot satrt with * and map it, so that your last line will be ignored.
Note: with this apporach you have to make sure your first two columns never start with *. If you have a doubt then you can use the condition doesnot equal to ***EOF for first field and doesnot equal to *** for the second field when you map. I hope it makes sense to you.
Regards,
---Satish

How to read a file which content hindi characters.....

I m reading a text file which content hindi characters.... but m nt getting the right result. It shows garbage instead of hindi characters.
plz somebody help me....:(

You posted this in the XML forum. Is this an XML file you are asking about?
And we need definitions for some of the terms you used in your original post. You said "it shows garbage". We need to know:
1. What is the "it" there?
2. How does it "show" something?
3. What does the "garbage" look like.
In future you will find you get better answers if you write better questions.

Problem in message mapping due to file sender content conversion

Hi all
basically i m using file sender content conversion and couldn't make file in a proper nested structure where weight was the nested field of detail as there is a limitation of content conversion in file adapter:
My file came out like this:
<header>
</header>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<trailer>
</trailer>
and i wanted it like:
<header>
</header>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<trailer>
</trailer>
so now the problem is i want to generate an idoc from it....but theres no way out to determine which weight is related to what detail except that the weight related to detail 1 comes after start and end of detail 1 tag and then weights of second detail comes after start and end of detail 2 tag in my source xml file.
The structure of the target idoc is
<header>
</header>
<Detail>
<Weight>
<flag>D1</flag>
</Weight>
<Weight>
<flag>D1</flag>
</Weight>
</Detail>
<Detail>
<Weight>
<flag>D2</flag>
</Weight>
<Weight>
<flag>D2</flag>
</Weight>
</Detail>
<trailer>
</trailer>
so i was wondering if i can make a user defined function in which i feed detail and weight and result a flag d1/ d2 inside the tag field. My logic is smth like
while detail is 1 make all the tag weights coming after detail 1 inside <detail1> tag then resultlist.CC for context change then while detail is 2 make a loop to fill the weight coming after detail 2 inside the <detail2>
Is this possible by any means. I really need help
Thnks
Naina

Hi
My sender file content conversion have this setting:
HEADER,1,DETAIL,*,Weights,*,TRAILER,*
And plz give me more idea of the adapter module ....is there any blog available which is related to my problem.
Naina

Sender File (FCC) - Content of File into single XML Tag

Hi,
Input file
This is Line1
This is Line2
Expected Sender File adapter FCC into XML
<Document>
.<File>
..<Content> This is line 1 This is line2</content>
.</File>
</Document>
FCC is giving the following output with the below config,
File.fieldNames = Content
File.fieldSeparator = '0x1A' (HexaDecimal rep for EndOfFile)
<Document>
.<File>
..<Content>This is line 1</content>
..<Content>This is line 2</content>
.</File>
</Document>
How can i read the complete file into a single XML tag?
I am aware of other options (AdapterModules or Javamapping). But i want to keep it simple to FileAdapter using FCC or using MessageTransformBean (if possible)
-SM

FCC donse't work here, So i wrote a simple Java map inside Execute method to convert the content to the required format.
public void execute(InputStream in, OutputStream out) throws StreamTransformationException{
StringBuilder sb = new StringBuilder();
       try {
       BufferedReader reader = new BufferedReader(new InputStreamReader(in, "UTF-8"));
       while ((line = reader.readLine()) != null) {
           sb.append(line).append("\r\n");
       } finally {
       in.close();
After i had the input string, i formatted it to get the required output as XML ...
<Document>
.<File>
..<Content> This is line 1 This is line2</content>
.</File>
</Document>

File sender content conversion

hello
I have a txt file sender content conversion in SAP PI.
I define in the content conversion 6 fields names(field1, field2, field3,field4,field5,field 6) but the fie that I am loading has only three field(field1,field2,field3). the file is still loading though there is a different in the structure between what I define in the PI to what is loading to the PI.
is there a way to send an error with out loading the file?
I read about the count function in the mapping. isnt there a build in function that suppose to load only the structure that is define?
Thanks
Kfir

If you define 6 fields and only 3 are present in the test file then you wont get an error (AFAIK)
However, if you define 3 fields and there are 6 present in the source file then you will get an error saying more number of parameters found.
isnt there a build in function that suppose to load only the structure that is define?
I dont think so....this may however be achieved using a custom adapter module.
Update:
Just remembered that SAP PI (7.1 and above) comes with inbuilt XML-validation function....check if that helps in your design.
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 15, 2010 1:12 PM

Challenge in File Sender Content Conversion

Hi,
I have a real challenge concerning File Sender content conversion in SAP XI.
My flat file looks like this:
##H   300
MAR   206
KAS 1
DAT 01.03.08
ART 1.129
KUN 118
EAN 4.499
REL 5.0j 16.05.06
SER             1
##E   300
##H   301
DAT 01.03.08
ZEI 07:54
KAS 1
##E   301
Each row represents a data field and has two values: The first one defines the field name, the second represents the field value. E.g. 'DAT' stands for Date and has the value 01.03.08 in the example.
The fields belonging together in one data set are enclosed by a start qualiefier (##H)and an end qualifier (##E).
The value after these qualifiers (i.e. '300' and '301' in the example above) represent a certain record type, e.g. '300' represents Customer data and '301' represents Account Data.
Is it possible with file content conversion to create the following XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://sap.com/xi/account">
     <300>
          <MAR>206</MAR>
          <KAS>1</KAS>
          <DAT>01.03.08</DAT>
          <ART>1.129</ART>
          <KUN>118</KUN>
          <EAN>4.499</EAN>
          <REL>5.0j 16.05.06</REL>
          <SER>1</SER>
     </300>
     <301>
          <DAT>01.03.08</DAT>
          <ZEI>07:54</ZEI>
          <KAS>1</KAS>
     </301>
</ns0:MT_DATA>
If it is not possible with content conversion, what could be an alternative? Adapter Module? MultiMapping?
I'd really appreciate your input as I am working on this since several days without a solution.
Thanks in advance.
Alex

It is not possible thru adapter..
There is one blog to convert such files to XML sing java mapping. Search for any flat file to Idoc or xml in the forum.
VJ

File sender content conversion 0..unbounded does not pull file

i am trying to map a flat file using content conversion to this xml structure:
<Header>
<Field_ID/>
<Filler/>
<Record_type/>
<File_name/>
<File_date/>
<File_time/>
<Heb_code/>
<Claim_no/>
<Cont_no/>
<Remark/>
</Header>
<Claim_Header>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<License_no/>
<ODO_meter/>
<Claim_type/>
<VIN_code/>
<Claim_open_date/>
<Claim_fix_date/>
<N_code/>
<C_code/>
<Ejob1/>
<Ejob2/>
<Page_no/>
<Pre_conf_date/>
<Pre_conf_no/>
<Part_buy_date/>
<KM_prev_fix/>
<Bill_prev_fix/>
<Material_fault/>
<Damage_whole/>
<Damage_code/>
<Job_amount/>
<Towing_amount/>
<Parts_amount/>
<Hour_rate/>
<Cont_mark/>
</Claim_Header>
<job_row>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<shaaton_code/>
<job_finish_code/>
<amount/>
<job_time/>
<row_value/>
<color_code/>
</job_row>
<part_row>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<material_code/>
<amount/>
<unit_price/>
<row_value/>
</part_row>
<remark>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<remark/>
</remark>
<footer>
<Field_ID/>
<Filler/>
<Record_type/>
<File_name/>
<File_Record_no/>
<Claim_no/>
<Cont_no/>
<Remark/>
</footer>
job_row, part_row and remark are records that occur 0..unbounded.
when i write in recordset structure: Header,1,Claim_Header,1,Job_Row,1,Part_Row,1,Remark,1,Footer,1
and put file with one record each, the file is pulled, but when i change recordset structure to:
Header,1,Claim_Header,1,Job_Row,* ,Part_Row,* ,Remark,*,Footer,1
the file is not pulled.
can anyone tell me what i'm doing wrong?
thanx
Tomer

Hi,
Refer this links for FCC.
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani

Overwrite files in content

Similar Messages

Maybe you are looking for