OWB 10g: how control files are generated?

We are using OWB 10g within a 10g Database. We want to know how control files are generated by OWB in the file system. The reason we need to know is because our DBAs do not want to create directory objects pointing to NAS devices, their policy states that all directory objects should be on SAN shares. We rather use NAS shares since it simplifies our batch (too long to explain here). OWB has the "CREATE ANY DIRECTORY" privilege granted. Is it using this privilege to create a directory object for the path we specify the control file in the mapping or is it writing directly to this path? We checked the directory objects created (SELECT * FROM DBA_DIRECTORIES) after deploying a control file and it didn't seem to have created any new ones. Anyone knows how OWB creates these control files?

Yes, indeed that's what we were after. We basically wanted to be sure we are not breaking an internal policy that says that "Oracle directory objects can not be located on NAS shares". The reasoning behind this policy is that NAS shares are not deemed highly available or high I/O devices hence our Oracle DBAs will not allow us to create any Oracle directory objects in NAS shares. The policy states that all database data should be stored in SAN shares which are directly attached to the servers and are therefore high I/O devices. It is arguable if the OWB data we want to load is really part of a database, we believe it is not. There are other implications in our environment about using NAS instead of SAN (NAS can run in active-active mode across different data centres, whereas SAN requires replication since it doesn't usually work well in an active-active mode across different data centres). So based on your answer we should be fine since OWB reads and writes directly to the files without using Oracle Directory Objects which supports our theory that these are not DB specific files and are only "OWB App" files which can then sit on a NAS without breaking the above stated policy.

Similar Messages

How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

HI
I created a web application and configured rbs storage ,
I uploaded documents (for ex: 18 number)
after uploaded documents , and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
and also I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
select count(*) from alldocs
Select count(*) from AllDocstreams
but when I delete some docs from document library ,
1)the doc itself deleted from document library
2)when I check the rbs storage there is no number of files are decreased(its still 39 files ), its same as before doc deleted from doc library
after some time I found the number of files are decreasing from RBS storage folder in sql server,
here I want to know the how the files are decreasing from RBS storage after some time, where shld I check the settings for this? and how I control on it
here how I know the settings for cleaning up orphan BLBOS how these deleted BLOB
adil

1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
2. There is a RBS cleanup job which deletes files from RBS. for more info check
http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

Images and js files within a deployed war file are generating 404 errors.

Greetings,
I have an odd situation in that image files and js files that are part of a deployed war file are generating 404 (not found) errors when accessed via https but ARE found when accessed via http.
Unfortunately we are required to use https.
I have verified via jar -tf that the files are indeed part of the war file. So, it is not that they are missing as is evident when accessed via http. (they appear as expected)
A work around is to create the sub directories under the document root, on the ohs, and populate the sub directories with the images and js files that were used as part of the war file build. While this works, it doesn't explain why they would generate a 404 error when referenced from within the war via https.
The war file works correctly on our 10g installation.
I also have a very simple deployed war file and it too seems to have an issue finding direcotries/files that are part of the war file when referenced via https but not http.
We are using Oracle 11g OHS and using the WLS Admin Console to do the deploying. We also are using the OSSO for the performing the required authentication.
I have an SR in with oracle and have been working with them but I thought I would post here too.
Suggestions?
Thanks in advance.
Edited by: emmett on Jan 5, 2011 2:47 PM

Don't crosspost. Continue here: http://forum.java.sun.com/thread.jspa?threadID=5251627

Numerous trace files are generating every minute causing space issue

Hi All,
numerous trace files are generating every minute <SID>_<PID>_APPSPERF01.trc format.
entry in trace file will be like..
EXEC #10:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1734896627,tim=1339571764486430
WAIT #10: nam='SQL*Net message to client' ela= 6 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764491273
FETCH #10:c=0,e=0,p=0,cr=2,cu=0,mis=0,r=1,dep=0,og=1,plh=1734896627,tim=1339571764486430
WAIT #10: nam='SQL*Net message from client' ela= 277 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764491806
EXEC #11:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=2638510909,tim=1339571764486430
FETCH #11:c=0,e=0,p=0,cr=9,cu=0,mis=0,r=0,dep=0,og=1,plh=2638510909,tim=1339571764486430
WAIT #11: nam='SQL*Net message to client' ela= 6 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764493265
*** 2012-06-13 03:16:14.496
WAIT #11: nam='SQL*Net message from client' ela= 10003326 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571774496705
BINDS #10:
Bind#0
oacdty=01 mxl=32(21) mxlc=00 mal=00 scl=00 pre=00
oacflg=00 fl2=1000001 frm=01 csi=871 siz=2064 off=0
kxsbbbfp=2b8ec799df38 bln=32 avl=03 flg=05
value="535"
Bind#1
oacdty=01 mxl=32(21) mxlc=00 mal=00 scl=00 pre=00
oacflg=00 fl2=1000001 frm=01 csi=871 siz=0 off=32
kxsbbbfp=2b8ec799df58 bln=32 avl=04 flg=01
value="1003"
SQL> show parameter trace
NAME TYPE VALUE
tracefiles_public boolean TRUE
log_archive_trace integer 0
sec_protocol_error_trace_action string TRACE
sql_trace boolean FALSE
trace_enabled boolean TRUE
tracefile_identifier string
Profile options like "FND:Debug Log Enabled" and "Utilities:SQL Trace" are set to No
Can some one help me to stop these trace generation.
is there any way to find the cause for these trace?
Thanks in adv...

Hi;
Please check who enable trace. Please see:
How to audit users who enabled traces?
check concurrent programs first
*from the screen
*F11, then select the trace, then Ctrl+F11
Concurrent > program > define
open the form, press F11 (query mode), select the trace, then (ctrl + f11) this should return all concurrent programs which have trace enabled
Regard
Helios

Very large HEAPDUMP files are generated when executing BI Web reports NW7.0

Dear Gurus,
I´m facing a new problem.
When few users are working in Portal to execute BI Web reports and queries, the system stops and big files are generated in directory: /usr/sap/BWQ/DVEBMGS42/j2ee/cluster/server0
I´m using AIX 5.3. The files are these:
2354248 Sep 29 12:31 Snap0001.20080929.153102.766064.trc
1028628480 Sep 29 12:32 heapdump.20080929.153102.766064.phd
0 Sep 29 12:32 javacore.20080929.153102.766064.txt
I was searching for any solution in SAP help and notes. I´ve read a lot of notes:
SAP Note 1030279 - Reports with very large result sets-BI Java
SAP Note 1053495 - Settings to get a heapdump with IBM JVM on AIX
SAP Note 1008619 - java.lang.OutOfMemoryError in BEx Web Applications
SAP Note 1127156 - Safety belt: Result set iss too large
SAP Note 723909 - Java VM settings for J2EE
SAP Note 1150242 - Improving performance/memory in the BEX Analyzer
SAP Note 950602 - Performance problems when you start a query in Java Web
SAP Note 1021517 - NW 2004s BI Web memory optimization for large analysis item
SAP Note 1044330 - Java parameterization for BI systems
SAP Note 1025307 - Composite note for NW2004s performance: Reporting
But still not having found an answer to solve this problem.
In note 1030279 there is written:
?We will provide an optimization of the memory requirement in the next Support Package Stack. With this optimization, you can display a report as "stateless", so that the system can then immediately release the memory that is required to set up the result set.?
I´m using Support Stack 15 for ABAP and Java, but I don´t have more information about this problem or stateless function in another note. And I don´t know how can I use this STATELESS function in BI.
Anobody have any idea to solve this problem?
Thanks a lot,
Carlos

Hi,
Heap dumps are generated when there is an inmbalance in Java VM parameterization..
Also please remove the parameter "-XX:+HeapDumpOnOutOfMemoryError " in Config tool, so that heap dumps will not generated and fill up the disk space..
My advise is to send the heap dumps to SAP for recommendations.. Meanwhile check with SAP notes for Java VM recommendations..
Regards
Thilip Kumar
Edited by: Thilip Kumar on Sep 30, 2008 5:58 PM

Forms 10g, how to send ReportServer generated PDF directly to client printr

Hi
We are implementing Forms 10g now, at we are facing quite a big problem - we haven't found a way how to send Report Server generated PDF directly to printer installed in clients computer.
Forms 10g and ReportServer are installed in the same machine and clients are accessing Forms10g through IE. Installing all the printers to the Forms10g server is not an option!
Is there any way of doing it?
Probably we could write a java bean that can read in the byte array and directly somehow send it to clients printer(java can read client printer list) but at this moment I have no idea how to accomplish it - haven't investigated it yet.
So if anyone has working software, please let me know how you achieved it.
Thanks!

may be this will help
Re: Printing Reports directly from to a printer via 10g forms (Linux)
DirectPrint Javabean and barcode fonts

Javacore file are generated in oracle home

hi all,
i have some problem with web enterprise manager but it is resolve when i shutdown then restart the system but issue is that it generated javacore files in oracle home. is these files are taken to be serious(why it is generated).i am using oracle 10gR3
Regards

Hi,
My application also generating .phd headdump file causing out of memory error. Did you get any fix for that. I dont want this files to be generated. How can i stop this files to be generated.
Please suggest if possible asap.
Thanks..

How do we know how many PDFs are generated?

Hello All-
We have created an Application ID with enough credentials on it to call the Adobe Services and our developers are using WebServices to call the Form Server in their code with that particular App Id and Generate the PDFs and what we really want to know is if there is any setting in the Adminui or in the code where we can set that and see how many PDFs are being generated for a period of time from that particular App Id? We are not using PDFGen component.
we are using Adobe LiveCycle 8.0.1 SP3, WebSphere 6.1 and DB2 8.2 database.
It will be great if someone can tell me if they did this before.
Thanks in Advance

On the old discussion software, they had distinctive avatars and identifiers under the avatars. They could have adopted distinctive avatars with the new forum software but they didn't. The reason that they didn't, I assume, is because the new software allows secondary icons to identify users. Every level had its own icon, the Hosts had their own icon, and Apple employees had theirs. This identification system was temporarily disabled along with the rest of the levels and reputations because of the performance hit that was being caused. It may come back if they can fix the performance problems.
Until then, Hosts and Apple employees have been using text signatures, such as "Apple Discussions Host" to identify themselves. There may be Apple employees who have not gotten the word about the text signatures.
BTW, to see what I mean by the identification icons, look at how Jive has implemented this feature on their own support forums. On this forum page, look to the right in the box labeled "Legend".

How the files are recorded/saved.

Getting an iPad2 and GarageBand. Wondering how the files save and how much space they take up? I know raw wave files are quite bulky. Im looking at the 16GB wifi iPad. Any info?

1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
2. There is a RBS cleanup job which deletes files from RBS. for more info check
http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

Obvious Way to Tell How Many Files are Selected?

I’ve been trying my best to love Lightroom, and I get close, but there’s one problem that I just can’t get past.
Five minutes ago, I tried to export one photo, and I ended up exporting 52 photos. This happens all the time. If I had a dime for every time I exported 500 photos instead of 1 photo, moved 500 photos instead of one photo, etc, I’d have a lot of dimes.
Anyway, I deleted the 51 extra exports, synced the folder, got everything where I wanted it, then … exported 52 photos again.
Sigh.
The only way I’ve been able to avoid this is in the past is by obsessively pressing Command+D. When I’m trying to do anything, I pound these two keys like there’s no tomorrow, but of course, I have to re-select the files I do want to perform actions on.
I kept thinking I’d get used to it, but I’m still having problems to no end. Unless I look very, very closely, I can’t tell if photos are selected or not, and if an entire screen full of photos are selected, they all look the same, so I really can’t tell.
That’s the background, now my questions if I may:
Is there any way to get a dialog box before performing actions on multiple photos? Something that says, “this action will be performed on 1,871 photos, do you want to proceed?” or something to that effect?
Ironically, it already does this when I want to delete something, which is great, but no such luck for any other actions.
By any chance, is there something I can do to make the number of photos I have selected, more obvious?
I know this is not a bug or program flaw, it’s a flaw with how my brain works with the program, but if I could figure out a way to make them work together , this application would be pretty awesome. As it is, I spend more time undoing mistakes than I do organizing and editing photos.
Thank you very much for any help.

I am so pleased to read your post and realize I'm not the only one that gets tripped up by this! I've bee using LR extensively for more than two years now and even today, just now, I wanted to export ONE file, and the highlighting onscreen appeared to indicate I've selected one file, but turned out it was dozens of files. Now... when I'm simply exporting copies of files to another folder it's not a dangerous situation. BUT! It is very dangerous if one wishes to delete a file or several files and you think those are the only files you're deleting. Many, many times I have caught this in time, fortunately. To me this is one example of how the experience of software designers do not well understand how the end user will understand a program. Professional photographers are very specific with everything they do and don't want a program tripping them up continually. This obvious confusion over which files are actually "selected" needs cleared up.
I read the responses to your post and find them dissatisfying. Please, Adobe, test your software with actual working photographers and not just Adobe engineers who may also happen to be amateur photographers.

Lot of core files are generated in webserver machine.......

we have a iplanet webserver running in our production environment........it is creating lot of entries in the file /var/adm/messages...............
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.62) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.64) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.84) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.88) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.90) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.92) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.94) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.106) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.108) failed: 1
Aug 11 13:00:01 uk17 sendmail[1449]: [ID 702911 mail.warning] gethostbyaddr(192.168.245.110) failed: 1
It is creating lot of core files in /var/core/ with the name.......
ore.ns-httpd.14156.uk17.0.0.1218243851
core.ns-httpd.14922.uk17.0.0.1217950925
core.ns-httpd.14922.uk17.0.0.1217950926
core.ns-httpd.14937.uk17.0.0.1218243696
core.ns-httpd.14937.uk17.0.0.1218243697
core.ns-httpd.14949.uk17.0.0.1218243760
core.ns-httpd.14949.uk17.0.0.1218243762
core.ns-httpd.14955.uk17.0.0.1218243765
core.ns-httpd.14955.uk17.0.0.1218243767
core.ns-httpd.14977.uk17.0.0.1218243777
those files are in byte code so unable to read those file.............
Please any one help me on this issue...............

First migrate your server to the latest Web Server 7.0 update 3
http://www.sun.com/software/products/web_srvr/index.xml
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=SJWS-7.0U3-OTH-G-F@CDS-CDS_SMI
You are getting those messages as gethostbyaddr(192.168.245.92) is failing. Try writing a small C program which calls gethostbyaddr(192.168.245.92) and see if its an o/s issue.
If you are on Solaris 10 try to see why Web Server is dumping core by
mdb core.pid
::stackAre you sure you have patch levels as recommended in the release notes of Web Server?
Have you enabled IPv6? Since when are you seeing these core dumps?

Changing how download files are opened

Hi, is it possible to change how a file is opened from the downloads window?
I am specifically thinking of .doc files which open in text edit windows, and wld rather they opened in pages or adobe.
thanks all

Greetings,
You can't open .doc files in Adobe, since there is no such application. Adobe makes several applications, and if you're referring to Adobe Reader, it only opens PDF files because that is it's sole purpose. If you have Pages,
You can open .doc files in Pages if you choose; you will need to Get Info on the .doc file and change the "Open with:" application to Pages, then click the "Change All…" button to apply it to all.doc files.

How to proceed further once the explain plan and trace files are generated?

Hi Friends,
I need to improve the performance of on of the views that i am working on.
As suggested in the thread - http://forums.oracle.com/forums/thread.jspa?threadID=863295&tstart=0 , i gave generated the explain plan and the trace file.
From the explain plan, we can see the expensive operations for the query.
Can any one please tell, how to proceed further from here on i.e. how to make this expensive operations less expensive?
For ex: FULL TABLE SCAN might be an expensive operation when the table has indexes.In such cases, how can we avoid such operations to make query faster?
Regards,
Sreekanth Munagala.

Hi Veena,
An earlier post by you regarding P45 is as below
Starter report P45(3) / P46 efiling for UK
from my understanding though i have not worked on GB Payroll you have said that you deleted IT 65 details of leaver,however there must be clusters generated in system from where the earlier data needs to be deleted and may be that is why you are facing the issue.
In Indian payroll when we execute text file for efiling of tax after challan mapping all the data compiles and sits in PCL cluster and therefore we are unable to generate form 16 with proper output,here we delete the clusters and rerun again the mappings and then check form 16.
Hope this might help you,Experts have suggested you earlier also,they may correct me for this.
Salil

Pdf files are generated at update

Hello all,
I'm new to RH. When generating the help file (first time around or during subsequent updates), RH generates a pdf file for each page of my manual. Can someone tell me where this is disabled? Thanks so much.

Hmmm, apologies as I'm lost on exactly what you are doing. Are you familiar with Jing or ScreenR?
http://www.techsmith.com/jing.html
http://www.screenr.com/
These apps allow you to record what you see on the screen and provide a link that allows others to watch the recording. I suggest these because I'm thinking in your case it might be beneficial for us to see first hand what you are seeing.
I promise that I'm not trying to be intentionally obtuse here.
In RoboHelp, I know we can establish links between Microsoft Word documents and Adobe Framemaker documents and update those links when the source content changes so it updates accordingly in RoboHelp. But I was unaware the same could be done with PDF. I'm also confused about your mention of seeing a PDF file for each "Book", so hopefully by showing us what is happening it will make more sense on our end.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

(OWB 10g R2) Control Center Manager won't start

Hi,
I'm in the middle of upgrading from OWB10g Release 1 to OWB10g Release 2 on a testbox.
I have completed the steps to upgrade the runtime metadata (I did the Move, then I upgraded the locations and then I ran the tcl script in OMBPlus).
Now, I have gone to the DEFAULT_CONFIGURATION for my project and I updated the default control center for my project.
Follow me so far?
Okay, here's the problem.... when I try to start the "Control Center Manager" from the Design Center's Tool menu.... I see nothing but a grey window with a titlebar and nothing else.
This happens regardless of whether I try to launch the Control Center Manager from a windows client or the linux server.
On the linux server I see this output after I enter the username and password to connect to the Control Center Manager:
java.lang.RuntimeException: Cannot find handler method handleView
at oracle.wh.ui.editor.listener.ReflectListener.findMethod(ReflectListener.java:80)
at oracle.wh.ui.editor.listener.ReflectListener.<init>(ReflectListener.java:28)
at oracle.wh.ui.editor.listener.ReflectPopupMenuListener.<init>(ReflectPopupMenuListener.java:63)
at oracle.wh.ui.editor.menu.MenuUtils.addEventHandler(MenuUtils.java:83)
at oracle.wh.ui.editor.menu.MenuDefinitionImpl.initMenuItem(MenuDefinitionImpl.java:167)
at oracle.wh.ui.editor.menu.MenuDefinitionImpl.constructMenu(MenuDefinitionImpl.java:197)
at oracle.wh.ui.editor.menu.MenuDefinitionImpl.createMenuBar(MenuDefinitionImpl.java:144)
at oracle.wh.ui.editor.Editor.init(Editor.java:1045)
at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1421)
at oracle.wh.ui.runtime.deploymentManager.DeploymentManagerEditor.<init>(DeploymentManagerEditor.java:127)
at oracle.wh.ui.runtime.deploymentManager.DeploymentManagerEditor.<init>(DeploymentManagerEditor.java:110)
at oracle.wh.ui.runtime.RuntimeController.startDeployManager(RuntimeController.java:270)
at oracle.wh.ui.runtime.RuntimeController.actionPerformed(RuntimeController.java:200)
at oracle.wh.service.sdk.OWBConsumer.dataItemAvailable(OWBInfoBus.java:381)
at javax.infobus.DefaultController.fireItemAvailable(DefaultController.java:90)
at javax.infobus.InfoBus.fireItemAvailable(InfoBus.java:989)
at oracle.wh.service.sdk.OWBInfoBus.produce(OWBInfoBus.java:160)
at oracle.wh.service.sdk.OWBInfoBus.produce(OWBInfoBus.java:76)
at oracle.wh.ui.console.commands.TreeMenuHandler.notify(TreeMenuHandler.java:94)
at oracle.wh.ui.console.commands.DeploymentMgrCmd.performAction(DeploymentMgrCmd.java:26)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
------------ could not find : oracle/wh/ui/common/media/T_projectObj.gif
Class of this owner is : oracle.wh.repos.impl.application.CMPWBDataWarehouse
Class of this owner is : oracle.wh.repos.impl.application.CMPWBDataWarehouse
Class of this owner is : oracle.wh.repos.impl.processFlow.CMPProcessInstalledModule
====== ZDockingManager : DOCK : todock: DeploymentManagerTabsTag: station: ROOT : constraint : East
===add component name: ROOT : size: java.awt.Dimension[width=200,height=300]
===add component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
ZDockingManager:==== before showpanel
====== ZDockingManager : DOCK : todock: DeploymentManagerMonitorTag: station: DeploymentManagerTabsTag : constraint : South
===remove component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
===add component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
===add component name: DeploymentManagerTabsTag : size: java.awt.Dimension[width=400,height=416]
===add component name: null : size: java.awt.Dimension[width=400,height=416]
===add component name: DeploymentManagerMonitorTag : size: java.awt.Dimension[width=200,height=116]
ZDockingManager:==== before showpanel
====== ZDockingManager : DOCK : todock: DeploymentManagerButtonToolBarTag: station: MenuBarPanel : constraint : South
===add component name: MenuBarPanel : size: java.awt.Dimension[width=205,height=26]
===add component name: null : size: java.awt.Dimension[width=191,height=30]
ZDockingManager:===== before undock:
ZDockingManager:==== undock panel : DeploymentManagerButtonToolBarTag
ZDockingManager:==== undock panel 2 : DeploymentManagerButtonToolBarTag
0 : V1
===remove component name: null : size: java.awt.Dimension[width=191,height=30]
===remove component name: MenuBarPanel : size: java.awt.Dimension[width=205,height=26]
ZDockingManager:===== after undock:
====== ZDockingManager : DOCK : todock: DeploymentManagerButtonToolBarTag: station: MenuBarPanel : constraint : South
===add component name: MenuBarPanel : size: java.awt.Dimension[width=205,height=26]
===add component name: null : size: java.awt.Dimension[width=191,height=30]
Layout Not Found: DeployMgrLayout.xml
setVisible called for editor: Control Center: MM_RUNTIME_REP, value = true
Posting GUI_STARTING on oracle.wh.ui.runtime.deploymentManager.DeploymentManagerEditor[frame2,0,0,1024x768,invalid,hidden,layout=java.awt.BorderLayout,title=Control Center: MM_RUNTIME_REP,resizable,normal,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=javax.swing.JRootPane[,0,0,0x0,invalid,layout=javax.swing.JRootPane$RootLayout,alignmentX=null,alignmentY=null,border=,flags=385,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true]
RUNTIME_SERVICES_DEBUG [AWT-EventQueue-0] DeploymentUtils.AdapterTypeWBTypeMapping.addBType: ERROR already added key= Table value= CMPProfileTable
RUNTIME_SERVICES_DEBUG [AWT-EventQueue-0] DeploymentUtils.AdapterTypeWBTypeMapping.addAType: ERROR already added key= CMPAdvancedQueue value= AdvancedQueue
RUNTIME_SERVICES_DEBUG [AWT-EventQueue-0] DeploymentUtils.AdapterTypeWBTypeMapping.addBType: ERROR already added key= AdvancedQueue value= CMPAdvancedQueue
Has this happened to anyone else?

Hi, thanks for responding...
When I run show_service.sql it says the Control Center Service is Available. (See below).
==================================
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @./show_service.sql
Available
PL/SQL procedure successfully completed.
SQL>
===================================
And when I do a ps command on linux I see the process running.
oracle 23349 1 0 12:03 ? 00:00:00 /bin/sh /u01/app/oracle/product/10.2.0/owb/owb/bin/unix/run_service.sh -automatic 1 /u01/app/o
oracle 23351 23349 0 12:03 ? 00:00:02 ../../../jdk/jre/bin/java -Xmx768M -Djava.awt.headless=true -DORACLE_HOME=/u01/app/oracle/prod
Do you suggest I run the service_doctor.sql even though the service looks like it is available?
Thanks.

OWB 10g: how control files are generated?

Similar Messages

Maybe you are looking for