P/N, S/N, and other battery numbers - 0A36303 for W510 70++

I recently bought a 9-cell/70++ replacement battery for my 4318 W510, so I'm trying to confirm that it's proper for the system and a legitimate Lenovo product. I don't see any obvious errors, but I can only find one Lenovo document (an environmental waste form) that matches the various P/Ns that I see -- reassuring, but because I'm both cautious and curious, I'm hoping to learn more about all of the different numbers that appear on the box, the battery proper, and in the power manager. Any help much appreciated! (I have pictures if needed, but figured to start here.)
Box
P/N 0A36303 (no matching numbers; it's the # that Lenovo recommends and the one I used for the purchase)
S/N PCHZ412 (no matching numbers)
Manufacture Date 2014-09-11 (vs 2014-09-04 in power manager)
Battery
FRU P/N 45N1173 (matches power manager)
ASM P/N 45N1006 (matches battery barcode)
Barcode 11S45N1006Z1ZS14494R8E (matches battery ASM; matches power manager)
Also on the barcode sticker: KC 2014.09 (if a manufacturing date, seems good, but not sure!)
Power Manager
Manufacture Date 2014-09-04 (vs 2014-09-11 on box)
First used date 2014-11
Serial Number 26414 (no matching numbers)
Barcode 1ZS14494R8E (matches battery)
FRU 45N1173 (matches battery)

For anyone uploading to their own server (or are not otherwise using a .mac account), the link provided in response to my question is helpful: http://homepage.mac.com/thgewecke/iwebchars.html. However, the directions it provided on NOT placing the .htaccess file in public_html was incorrect in my case. It was not until I uploaded the file to the main directory AND public_html was the problem fixed.
Another site that helped was: http://www.w3.org/International/questions/qa-htaccess-charset

Similar Messages

  • MBP not charging till 100%, and the battery lasts only for 1.5 hrs

    I have a MBP which I purchased in 2009 July, I have noticed when I charge my MB the last goes up to only 97% and the battery lasts only for about an hour and a half. I am still under warranty till 2012.
    How much is to to change the battery at apple, or is it covered under the warranty and how long will it take.

    farazthambi wrote:
    I have a MBP which I purchased in 2009 July, I have noticed when I charge my MB the last goes up to only 97% and the battery lasts only for about an hour and a half. I am still under warranty till 2012.
    How much is to to change the battery at apple, or is it covered under the warranty and how long will it take.
    Hi farazthambi: There may not be any reason to change your battery. Check out the Apple articles below for your issues.
    http://support.apple.com/kb/TS1909
    http://support.apple.com/kb/TS1473
    Stedman

  • Error 50/53 and other related numbers

    Hello, yesterday my ipod classic started having trouble playing songs. It would attempt to play some songs and struggle to do so. If it did manage to play the song, it would only manage a few seconds before skipping to the next song that it could easily play. I figured it just needed a little reset and did so but the ipod still had problems. Then I tried synching it with iTunes but no improvement. Then, I decided to restore it and start from scratch.
    It started synching and after awhile, it would stop short and say X song couldn't be copied to the ipod because of an unknown error: -53 (50 and other numbers have also appeared). Now I've done some searching already and tried numerous things already but nothing helps the situation. The most recent thing I tried was suggested here http://support.apple.com/kb/TS1539 and that didn't work. I then tried restoring the ipod and checking for hard drive errors, which it would detect and promptly fix but the ipod still failed to synch.
    However, after going through topics here and searching online, I have narrowed it down somewhat. While slowly synching songs by the smaller playlists (as my library has about 7000 songs), the ipod seemed to have no trouble as songs were copied quickly and without issue. But once I broke 1000 songs, it started struggling again. There were no error messages yet but I do believe the problem lies with the amount of data it's trying to copy. The only problem is, I have a 160 GB Ipod Classic so there shouldn't be any issue regarding available space. Even in iTunes, it says I have over 118 GB of data available if I were to copy the entire library. I recently found this topic https://discussions.apple.com/thread/4171036?tstart=0  but it seems to apply to Windows 7 instead of Windows 8 so I don't know for sure if a disk quota is the issue. Also, I have no idea on how to check the disk quota on Windows 8 (if I can check it at all).
    I really don't want to shell out $250 for a new ipod unless all options are exhausted. I'd take it to the Apple Store but my Applecare+ warranty already expired and if I recall, I can't purchase a new one. Can anyone help me? Please?

    An addendum. After it got hung up around 1000 songs, I disconnected it and it turned out to have lost all of the songs already on it from the failure.

  • Macscan, Norton, and other Anvirus/Antispyware programs for MBP

    I recently got macscan for my macbook pro but after reading some reviews it didnt seem like i needed it. Is macscan necessary for my mac? What about norton and other antivirus software?

    The fact is that there are no currently active malware threats that act on Mac OS X. Therefore, currently, there is no use for software that aims to protect you from malware. I have never run any sort of anti-virus or anti-malware application on any of my Macs because there simply has been no need to as of yet. That said, most of us are aware that the day may come sometime in the future when there is an active threat posed against Mac OS X. If (when) that day comes, I will buy anti-malware software at that time. Until then, use and enjoy the machine! Computing without anti-everything scanners running in the background all the time sapping your CPU cycles is much more enjoyable and faster!
    In short:
    Is macscan necessary for my mac? What about norton and other antivirus software?
    No, not right now. And definitely no to Norton anything. Norton products have never (well, not since the mid-90s maybe) been friendly to Macs. I have never had a good experience with a Norton product on OS X.
    --Travis

  • Are we ever going to see this (and other mobile apps) available for Android?

    I'm starting to get pretty upset about this. I've been a proponent of Adobe CC since it started, as the licensing and payment model works great for small businesses like mine. However, I feel like I'm not part of the CC group now as more and more mobile apps are launched that we cannot access. Surely there's a huge portion of Adobe CC users who don't use Apple products, but still work on the road and want to work with clients in their offices, etc, etc.
    Calling all non-Apple users... please can we apply some pressure as a group and get Adobe to make some sort of effort on this front?

    Or how about the other 90% of businesses working on Windows? When will this be available for Windows? (2-in-1s, Surface Pro 3, etc.)
    Please, stop with the Apple bias, Adobe! I'm never going to realistically use Comp CC, Photoshop or Illustrator on something that has only 1GB of RAM, a cutesy single-core mobile device processor (vs. the i7 in the Surface Pro 3), that can't print to the HP color laser jet sitting next to me, that can't multi-task between programs and that forces you to use a squishy, hide-the-pen-tip, rubber-tipped stylus. It's like choosing your teenage daughter's tablet to do demanding, professional work. Square peg, round hole.

  • Speakers work for phone and other apps, but not for music playback on 4G after downloading ios 8.0.2

    I know others are having off the wall issues with sound on their iPhones after installing the iOS 8.0.2...In my case? Thank God the sound for phone calls and alarms work, but the same can't be said for when I try to play music or a radio app?? And the speaker option on my voice mail sticks....
    There are 1001 other issues that I have with this so called upgrade, and let's just say that I've been looking at using my AT&T other phone options since I'm ready to upgrade....Since this is the second time in about a year that I've gone through **** and back with an Apple OS upgrade and there just isn't the cache there once was with owning an iPhone? I'm seriously questioning why be brand loyal when I can't find an answer to my issue and the one solution is to go to the Apple Store and deal with the arrogant and rude clerks OR try and see if someone has a decent solution, OR wait for weeks for Apple to offer a bug fix or access to older OS's!
    (BTW--I HATE how this OS kills the battery! And I'm not happy with the 2 apps that I didn't want and can't get rid of!)

    I was hoping that the iOS 8.1 update would have fixed my problem, but it has not. The app updates continue to hang and will not up date unless I follow the procedures mentioned earlier. I have spoken to Apple Care, and their only suggestion was to do a network settings reset. This worked once, but on the following days as more app updates appeared, they would not download. Once again, the only way to achieve my goal is to do one of the following;
    Change networks
    Sync through iTunes
    Reset Network Settings
    Turn off Wi Fi and use Cellular Data (not my preferred option especially while at home and connected to my home network).
    I think Apple are loosing the plot and seem to be chasing profits more than producing a good reliable product. I would have respected the company more if they had admitted that iOS8 was not ready for general release rather than release a faulty system causing so many problems.

  • XML to Flat File DB Table So I and Others Can Use SSRS for Reporting

    I'm using a program called Orbeon Forms to quickly create and distribute forms on the local network.
    The program just recently got updated to Version 4.6 so as to use SQL Server DB as a backend. (I was using MySQL in a lower versions)
    The data created when you submit a form into the database is held in  xml fomat in one of the columns. (see below).
    I am trying to create a separate table, to pull that data from the xml column (for that particular form) and place it in to a seperate table using the xml tags as columns.
    I have no idea where to start or how to do this. Please keep in mind I'm a novice when it comes to sql server (but I do know how to do select statements :-)....
    Is this very difficult to do? If it is (for me at least) where can I go to get someone to do it for me along with the documentation to do it?  I was also thinking of a way to create a trigger on the Orbeon table (this is how it is setup currently in
    the MySQL database) to automagically insert any saved form data to the new form data table. Is this also difficult to do? And can I have a trigger for each form I create on the table?
    If anyone can help, I'd appreciate it. Thanks.
    I would eventually like to add the form data from the old MySQL database table into this new Orbeon table but it appears the upgrade also added two extra columns. I figuring once in the Orbeon table then I will have to run whatever statements to place into
    the separate table so I can use the data.
    Randy Marrero

    Erland thanks for the reply. Even after reviewing the link you sent I'm still having problems. Guess that is why I'm not a programmer. Anyway I've create a test data form xml I've created and it is copy and pasted below.
    Again I'm only really interested seeing if I can get the information out of the xml and create it in its own flat file table. I keep reading that creating a trigger (when the form gets submitted into this database in the xml format, an on insert trigger
    would take all the data submitted and inserted into another table with just the data, into separate columns)  for this is the best way but I'm not sure how to do this either. I have a copy of what the MySQL trigger would look like but keep running
    into errors when I try to run it in SQL Server.  Also the issue with how I would create another trigger if / when I create another form. I read somewhere I can only create one on insert trigger per table, still don't know this to be true. Anyway below
    is the xml as it is in the xml table in the database.
    XML STARTS HERE------------------
    <
    formxmlns:oxf="http://www.orbeon.com/oxf/processors"xmlns:xxi="http://orbeon.org/oxf/xml/xinclude"xmlns:xh="http://www.w3.org/1999/xhtml"xmlns:xi="http://www.w3.org/2001/XInclude"xmlns:ev="http://www.w3.org/2001/xml-events"xmlns:saxon="http://saxon.sf.net/"xmlns:xs="http://www.w3.org/2001/XMLSchema"xmlns:odt="http://orbeon.org/oxf/xml/datatypes"xmlns:fb="http://orbeon.org/oxf/xml/form-builder"xmlns:xxf="http://orbeon.org/oxf/xml/xforms"xmlns:xbl="http://www.w3.org/ns/xbl"xmlns:xpl="java:org.orbeon.oxf.pipeline.api.FunctionLibrary"xmlns:sql="http://orbeon.org/oxf/xml/sql"xmlns:p="http://www.orbeon.com/oxf/pipeline"xmlns:fr="http://orbeon.org/oxf/xml/form-runner"xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"xmlns:xf="http://www.w3.org/2002/xforms"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xmlns:exf="http://www.exforms.org/exf/1-0">
      <
    Header>
        <
    HHIFR_Patch>/fr/service/persistence/crud/bfp/permits/form/738433584d6c0aff25e0ab8ca1bd99bcc7e10b49.bin</HHIFR_Patch>
      </
    Header>
      <
    Permit_Number_Hdr>
        <
    Permit_Number>Test123</Permit_Number>
      </
    Permit_Number_Hdr>
      <
    Permit_Info_Hdr>
        <
    Permit_Date>2014-07-15-05:00</Permit_Date>
        <
    Permit_Station>HQ</Permit_Station>
        <
    Permit_Employee_Number>0676</Permit_Employee_Number>
        <
    Permit_Status>Active</Permit_Status>
        <
    Employee_Name>Randy
    Marrero</Employee_Name>
      </
    Permit_Info_Hdr>
      <
    Applicant_Info_Hdr>
        <
    Applicant_Name>Randy
    Marrero</Applicant_Name>
        <
    Applicant_Phone>8434741099</Applicant_Phone>
        <
    Applicant_Email>[email protected]</Applicant_Email>
      </
    Applicant_Info_Hdr>
      <
    Mailing-Address-Section>
        <
    Mailing_Address>40
    Summit Dr</Mailing_Address>
        <
    Mailing_Suite/>
        <
    Mailing_City>Hilton
    Head Island</Mailing_City>
        <
    Mailing_State>SC</Mailing_State>
        <
    Mailing_Zip>29926</Mailing_Zip>
      </
    Mailing-Address-Section>
      <
    Physical_Burn_Hdr>
        <
    Physical_Address>35
    Summit Dr</Physical_Address>
        <
    Physical_Suite/>
        <
    Physical_City>Hilton
    Head Island</Physical_City>
        <
    Physical_State>South
    Carolina</Physical_State>
        <
    Physical_Zip>29926</Physical_Zip>
      </
    form>
    XML ENDS HERE ------------
    Randy Marrero

  • "Files" and other tabs not visible for document library after script editor webpart is added

    I created a document library and uploaded a few documents to ti.  On the ribbon, I could see both "Files" and "Library" tabs.  I then added a Script Editor webpart to this page because I needed to run some javascript on this
    page.  Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab.  My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
    library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there.  If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
    now Sharepoint knows that I'm working with a document library.  Is there any way aroudn this?  We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs.  I'm not sure why Sharepoint would
    be confused by the Script editor webpart.  It is not visible so when the page is not in edit more, you can't even see that Script editor.  So, my question is: is there any way to:
    - either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
    - or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
    I also experienced this issue when I wanted to insert some customized text on the same page that had a document library.  For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
    show some text at the top.  That also caused the Files and Library tabs to disappear.
    thanks,

    Hi,
    I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
    This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
    https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • CC (2014) Photo Program and other CS6 apps - Updates for CS6 to CC (2014)?

    I have the CS6 Design & Web Premium apps installed, plus the Creative Cloud Photo Program option (PS and LR).
    With the new CC (2014) release today I'm being offered CC (2014) updates for all the CS6 programs that I have that aren't in the Photo Program (i.e. Dreamweaver, Illustrator, InDesign, etc). Surely this isn't right. Shouldn't it be asking if I want to Install or Try them rather than providing an update?
    If I go ahead and update will it start charging me more? Its a bit confusing!

    I installed all the updates, including the CC 2014 programs. I am not being charged for them. However, they are not updates to the other programs. I now have 2 versions of all my CS6 programs installed on my computer. The CC 2014 programs are now default, for some reason, and when I open them they ask me if I want to start a free trial or if I want to put in a license code. My CS6 code doesn't work, obviously, but I tried anyway. I'm a little annoyed that this was offered to me like it was an update for my programs, even though it wasn't. And if I uninstall them, I am afraid that it is going to tell me that I have "updates" and try to install these programs again.

  • Cineform and other 3rd party plugins for Creative Cloud, what happened to them?

    Hi I don't want to panic but I just downloaded Adobe Premiere CC and it's telling me that I've rendered my previous project with a 3rd party plugin that isn't available. What is the process of installing my 3rd party plugins to premiere so I can edit with Blackmagic codecs, Cineform, and multiple others I have enjoyed using in CS6.

    I followed the instructions from the Cineform site as given by scarolan_CS4 (thanks for that).
    http://support.cineform.com/entries/24336007-A-Do-It-Yourself-Guide-to -adding-CineForm-support-in-Adobe-CC-Windows-
    Works like a charm.
    The only issues I have are:
    Cineform plugs (except for levels) don't work. But they didn't work on CS5.5 and CS6 either - plus cá change.
    I'm getting the 'saving metadata' when closing PP error back - I'd forgotten how I'd dealt with that, switched something off in prefs, if I remember (more internet searching!) This wasn't happening before I copied the Cineform directories to their CC locations, so I suspect it's related in some way.
    The editing presets and the rendering presets all work fine.
    ======================================
    I've also had good luck with other 3rd party plugins. I created a junction type link from C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore to C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore. The default mediacore directory is empty so this works, but I copied across 3rd party directories and files in the individual plugin folders for PP and AE as there are default Adobe files in there which may be different from CS6 to CC.
    Note that I also created a junction from Photoshop 64 plugins for CS6 to CC and this also works a treat.
    Just thought I'd mention it to show that it can work, I'm chuffed that it does as I was anticipating a system OS install to enable plugins to work and to keep 15-20% of my system SSD free.
    If this junction stuff is too complicated (and you don't mind having two sets of the same files or deleting the older versions) just copy the plugin and relevant settings files instead. I assume this will work, although I haven't specifically tested it myself.
    You can find free utilities to create junction links for Windows or this can be done via the command line. I forget the name of the utility I use, it works via the context menu. I have found that junction tends to work better than symbolic linking or other types of file 'aliasing' for most of my fumbling about with this solution.
    This stuff sounds more complicated than it is, once someone has given the steps to take and you have installed the junction/symbolic linking utility it's just a matter of following the steps.
    EDIT - I (re-)found the solution to the
    Metadata. Metadata writing in progress (n files pending)
    error -
    Go to Edit>Preferences>Media and uncheck Write XMP ID to Files on Import (thanks to Jim Simon on this forum for this).

  • AP And AR Invoice Numbers Required For Corresponding Credit Notes

    Dear All,
                  I need to print the invoice number on our Credit Note documents (both AR and AP). Although the invoice number is present in the remarks field, we need its field-id on the CN documents so that we can print on Document headers.
    Thanks,
    Ghazanfar Ahmed

    Hi Ghazanfar Ahmed,
    If you need to print the A/R Invoice and A/P Invoice number on your Credit Note documents.
    Try this, it will retrieve the Invoice No in Print.
    CASE 1
    A/R Credit Memo.
    ->> Open the PLD and Create 1 Database Field in Page Header (or) End of Reprot. then,
    ->> Goto Properties  Window. Click Content Tab then Select the Table and Column.
    Table -> ORIN - A/R Credit Memo
    Column -> Comments - Remarks..
    Result: This field will Display the Comments(Remarks) on A/R Credit Memo. Same on A/P Credit Memo.
    CASE 2
    A/R Credit Memo.
    ->> Open the PLD and Create 1 Database Field in Repetetive Area. then,
    ->> Goto Properties  Window. Click Content Tab then Select the Table and Column.
    Table -> RIN1 - A/R Credit Memo.
    Column -> BaseRef - Base Reference Number.
    Result: This field will Display the Base Document No.(Invoice No.) on A/R Credit Memo. Same on A/P Credit Memo.
    Regards,
    Madhan.

  • Is Zeiss wet cleaning wipes, and other commercial cleaning aids for camera and lens, safe????

    I looked for a answer in search but came up with nothing.  I have stuff I bought that are suppose to be good for camera's and lens but have'nt used much of it yet.  I have used the Zeiss wipes on my glasses but not on my gear much just yet.  It's this stuff safe????

    Bump

  • I can't see any menu, iphone details, and other things in itunes for windows. does anyone know what to do about this ?

    Hello!
    I have a big problem with itunes. I can't see a few things in it.
    I have attached a picture below.
    Also please note, i am a fresh iPhone owner and I run iTunes 10.5 on Windows 7 on 32 bits, and had NO problem with anything until iTunes.

    Try taking the USB lead out of the PC and plugging into another
    Then turn the phone off by holding the power ans home buttons at the same time
    the screen should now be dark
    press the home button down and keep it down while plugging in the lead to the phone, the apple logo should appear and then the pic of the USB on the screen, keep the button pressed all thru this and your pc should recognise the phone and open itunes (if its not already open )
    Hope this works
    Steve

  • I can't sync or back up my iPhone. And other is coming out for the entire usage. What should I do?

    For some reason "other" is showing up as taking all of the memory on my iPhone, and iTunes isn't letting me sync or back-up my phone as a result.

    Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    tt2

  • Gmail and other IMAP, smart mailbox for inboxes

    Hello,
    I have Mavericks, use Mail.app, including 4 active email accounts. I have a smart mailbox that includes any message from 3 of the 4 account inboxes, and I've been using this setup since Snow Leopard. After upgrading to Mavericks, this smart mailbox no longer works properly.
    So 2 of the 3 mailboxes included in the smart mailbox are gmail, the third is non-gmail IMAP. The smart mailbox does include the correct messages from all three inboxes together, but it lists the gmail boxes as being from archive (AKA All Mail) instead of Inbox. Apparently Mail.app is doing a message matching between those emails, and preferring the "all mail" version over the inbox version. This didn't seem to be more than an annoyance at first, until I discovered that I can't archive emails from the smart mailbox: I have to go directly to the inbox to archive them, because calling "archive" on an "all mail" message is a No-op.
    I beleive this problem is not specific to smart mailboxes, because it happens on search results as well. So
    Select gmail inbox
    search for a sender in that mailbox only
    select some of those messages
    click "archive"
    The effect is that the messages will disappaer from the current search result, but as soon as I dismiss the search I can see the messages are still in the inbox.
    Clearly the enhanced gmail integration was done hastily here.
    I don't know if there is a workaround here. Apple must fix!

    Oh, and there was one other issue I forgot to mention. When I used this arrangement before Mavericks, the smart mailbox pointing at my inboxes would "live update", so if new mail was received in an inbox and I was looking at the smart mailbox, it would update immediately. This functionality is no longer there.

Maybe you are looking for

  • Authorization Control of Customer Master

    Hi Experts, Is it possible to create a role with authorization restrict as follows ? The role is authorized to change both general level and company code level data of customer group A. For customer group B, however, it is authorized to change compan

  • When I hit tab on a form I get message "at least 2 windows have to be opened before you can merge them"

    It seems that anytime I hit the tab key on a web page with a form, like to move the cursor between first name and last name for example a message appears at the top of the web page display area that says "at least 2 windows have to be opened before y

  • Currency Conversion happend Record wise or on Aggregated Level

    Hi , Suppose we've currency converison applied on 0CALMONTH. And suppose we've 5 records for a CALMONTH december. In the Report, we do not ahve Document No as part of rows, so in that case data for a CALMONTH will be aggregated. So, in that case, whe

  • Mba freezes and than can't reboot (question mark in folder)

    My mba acts kind of crazy lately. It suddenly freezes and when I try to reboot it doesn't find my ssd and gives me the dreaded question mark in folder sign. When I try recovery mode it doesn't show my ssd, but if I keep trying sometimes after a few m

  • QuickTime 7.6.4 QTCF.dll Problem

    Hi, I am getting the following error when trying to use Nero Showtime: Problem signature: Problem Event Name: APPCRASH Application Name: ShowTime.exe Application Version: 5.2.8.100 Application Timestamp: 492568ac Fault Module Name: QTCF.dll_unloaded