P1006 and print servers...

Are there any print servers out there (any brand) that the P1006 is compatible with?
I don't require it to be wireless, although that would be nice - wired is fine too. I just want to be able to print remotely WITHOUT IT being connected to a computer...

Hi,
Your printer only has USB port however you can buy a print server to connect printer on the network. Here are few HP print servers:
Connectivity
J7942G HP Jetdirect en3700 External Print Server (USB, 10/100TX)
J7951G HP Jetdirect ew2400 802.11g Wireless and Fast Ethernet External Print Server
J7988G HP Jetdirect en1700 External Print Server
ExpertOne
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

Similar Messages

Print servers and printers problems on Win7 and Win8

Hello,
We have some computers, working on Windows operating system in the office: a few forking on the good old XP sp3, one running on the Win7 x64 home edition and one running on Win8 professional (the last one installed for new OS testing purposes)
During last two months I have tested a few print servers attempting to find one which can work with Windows 7: Trendnet, Synology, and D-link print servers. However, unsuccessfully. Here is the result:
   1) Any print servers is working perfectly with WinXP sp3 (full printing and MFP function support, easy configuration and access, successfully scanning and printing operations in 100% cases)
   2) No one print server is working correctly with Win7 home x64 (mostly successful installation but complicated and unclear configuration; printed pages often is missing, no scan support for MFP.
   3) There is a little bit better situation with Win8: 100% printing support on the same equipment but no scan support for MFP
Could you please help me with followings:
1) Could you please help me configure print servers and printers on Win7 x64, including printing and scanning support?
2) Could you please help me configure scanning support for Win8?
Please find full list of affected hardware bellow:
1) Machines, running on Win XP: Panasonic CF-29, CF-74, HP Compaq dc7600, some Acer laptops;
2) Machine, running on Win7 x64 home: Asus UX21, (OS probably was preinstalled on the factory)
3) Machine, running on Win8 pro: Lenovo X200 tablet
4) Printer HP LJ1020 with drivers for XP and Win7, x86 and x64
5) MFP printer Canon MP600 with drivers for XP and Win7, x86 and x64
6) Print server: D-link DPR-2000
7) Router: Cisco RV042G
All the machines has correct drivers installed, all the printers supports all the services if connected to computer directly. I have made all possible steps solving mentioned problems, including automated problem solving wizards on Win7.
Thanks in advance for your support

Hi,
Regarding the printer configure issue, I would like to share the following article:
Managing Printers and Print Servers
http://technet.microsoft.com/en-us/library/cc754769.aspx
According to the scanning support for Win8, it is better to post this issue in Windows 8 forum for more help.
Regards,
Vincent Wang
TechNet Community Support

P1006 and Wireless Network Printing

I have a P1006 connected to an Apple Airport Express on a home network. The Airport Express has a static IP, and the router is configured so that it also knows that the Airport Express has a static IP. I have a similar configuration with a second printer (Epson) that works reliably. However, print jobs sent to the P1006 vanish. I have used this arrangement in part to keep down the cost of replacement printers in the future (since they need not be purchased with built-in network connectivity.) I had some earlier connectivity to the P1006 earlier by using Windows Bonjour, but because of a wish to also be able to print to this printer from a Windows Mobile 6.1 Pocket PC using Jetcet (the PPC does not have Bonjour) tried going to direct IP printing.
This has not worked.
I have considered replacing the Airport Express because I know that HP printers have traditionally had an issue with being able to print from wireless print servers (given the additional cost and reliability this always seemed odd to me) and thought that perhaps using an HP print server might solve the issue. Although this slightly undercuts my goals, if it would consistently work with HP printers perhaps it would make sense. I looked at the HP 2101nw Wireless G Print Server, compatibility with the P1006 looks questionable. However, a post in this forum on December 19, 2008 in a thread called Re: Wireless Print Server compatibility for HP LaserJet P1005 seems to be a cut and past of other info from the HP site and lists the P1006 as compatible.
Can someone clarify this?
If the HP2101nw and the P1006 are not compatible, is there ANY print server that will work? For example, the HP Jetdirect ew2400 802.11g? Or, it need not be wireless though that would be preferable.

This could help you.
I was having trouble installing a HP P1006 Laser Printer on an Apple Airport. I worked for many hours with no avail. When plugged into the USB on the MacBook Pro, it printed great.
I noticed when the printer “self installed” using the USB, the name of the printer is
HP-P1006; and when I install the printer on the AirPort, it is called
Hewlett Packard HP-P1006. Having nothing to loose, I selected the Hewlett Packard HP-P1006 using Bonjour, then in the name below, I deleted the name Hewlett Packard_ leaving only the name HP-P1006. In other words, matching the name of the printer when using the USB. Too my amazement, it worked. I can now print wirelessly on the HP-P1006.

HP P1006 LaserJet printer and G4 Tiger computer - printing problems

Help. I bought a new HP P1006 LaserJet printer for a friend that has a G4 Computer that is running Tiger (10.4.11). I set everything up. I tried to print "one" page, to make sure all was well. Well...all was NOT well. It took nearly 4-5 minutes to print the page with just lines of text from a Word document. Does anyone know what could be wrong. I selected to print one page, then hit the print button. Then the computer started "thinking" and making all kinds of "thinking noises". Eventually it printed the page, but it too FOREVER.
I have three HP LaserJet printers. Two are working off another G4 running Tiger, and the other is working off a G5 and a Mac Mini Intel. When I print, it prints within seconds.
Please help me.

May be something on these links.
Troubleshooting printing issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=106714
Mac OS X: About the Reset Printing System feature
http://support.apple.com/kb/HT1341?viewlocale=en_US
 Cheers, Tom

Wirless Print Servers with Mac and Windows

I am very new to mac..macbook purchased just this week..facing some challenges but learning at the same time..I have my macbook running thru my wireless network on a Motorola SB4100 Cable modem, D-Link DI 614+ Wirless Broadband router and a d-link DPR-1260 Wirless Print Server..previously I have been using a Windows Laptop..I guess it seems that D-Link print servers are only for Windows systems??? I looked at the manual and it doesn't mention Mac..haven't been able to figure out how to add a prt to the mac and I guess that is why?...you need a seperate print for the mac with it's own wirless prt server? or can you replace the cable modem and router with some apple base station that does everything but then can windows laptop work on the network and wireless prt??
scott

I doubt you need any additional equipment. It should be a matter of setting up using PrinterBut posting your question in the Tiger- Printing & Faxing forum area may get you a faster answer.
http://discussions.apple.com/forum.jspa?forumID=756
It should be a matter of setting up in Printer Setup Utility using the ip address of the server.

NetWare Queues and USB Print Servers

Hello good people,
We usually use HP JetDirect en3700 (J7942A) USB print servers when we have
to, which work well.
However, there is severe constraint in the supply chain at the moment.
Do any of you have a suggestion for an alternative USB print server that
supports printing from a queues environment? Willing to look at any brand
or manufacturer.
Thanks.
Andrew

Jdvb,
> one of my LPT printers stopped working, and well, USB printers are more
> available.
> How do I get a USB printserver to service my NetWare 6.5 queue.
>
> I have ordered a D-link DPR-1061 printserver, though I am unsure of how
> to set it up in Nwadmin or something similar.
> My suplier stopped support for NetWare and I am basically clueless of
> how to work with NetWare.
>
> The Novell Netware printer works primarilly on IPX.
>
> I am unsure of how to make it work, the printserver also supports
> unix/Appletalk which I also see as options in Nwadmin when I add a
> printer.
> Though when I load Pserver and then the printserver it fails to load
> the driver for either appletalk/unix.
>
> please help
> Please help.
You need to install and configure NDPS (iPrint). The procedure is covered
in the docs and queue-based and NDPS can coexist. You then create a
printer in NDPS, have it service the queue. For output you use ypur
printer, configured as LPR.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Best Practises for File Sharing and Print Server on Windows Server 2012

Is it better to have File Sharing and Print Server installed on the same Windows 2012 Server ?
Or, they should be installed on 2 different Windows Servers ?
Hussien Sherief

It will work just fine to combine them.
But most people would recommend keeping functionality separate... if the budget allows. That whole "single point of failure" concept. If that server dies, you've lost both of those functions.

File and Printer Sharing Problem with WRT54G

I am currently having problems sharing files over my network. My setup consists of:
3 laptops (wireless)
1 desktop (wired)
WRT54G V6.0 router with firmware version 1.00.9.
All of the computers have File and Printer Sharing enabled, unique names, and are on the same workgroup. However none of the computers can see one another. When I try to view workgroup computers for my network places, the explorer window stops responding for about 30 sec. and then spits out a dialog with the error:
"Workgroup is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."
I think that this problem has something to do with the router, as I have been successfuly sharing files and a printer with these settings using a microsoft 802.11b router for over a year. After purchasing the linksys and swapping it out with my old router, filesharing no longer functions.
I have spent a little time browsing the forums and have seen other posts from people with simmiler problems, but was unable to find any solutions.
Any help would be much appreciated.
Thanks.

I'm having the same problems as you are, I have 2 computers on wired the other wireless the router is in between and I can't access from either side, although I can ping and remote connect but just cannot share files across the network. I have looked all over the forums too and there saying to ditch linksys and do something else.
Its not you thats caused this it is the firmware and the router that have the problems.
My Specs:
WRT-54G
v5.0
That new firmware update 1.00.9 just isn't working right. I might downgrade my fireware to fix this problem.
Message Edited by justin2006 on 09-26-200612:24 PM

How to get existing (Dlink) printer servers working with Snow Leopard

I have a new macbook. We have two existing Dlink 1260 print servers serving 3 Windows machines. Both connect to our network via CAT5, we have a Buffalo router and cable modem service. One print server has a HP inkjet ands the other has a Canon inkjet printer. I know the IP addresses (static) and TCP ports of the two print servers. Apple's support people told me they arent trained to help me on print servers.
How does one install these print servers in Snow Leopard 10.6?? I am out of ideas other than Geek Squad :>(

I would imagine you need to connect via IP, LPD, put the IP address of the server in for Address and the Port Name in for the Queue.
You will need Postscript drivers for the printers, based on info on the D-Link site.

Personal File Sharing and Printer Sharing difficulty

I hope someone can help me, this is really irritating.
I have an Intel iMac running OS X 10.4.11 and a motley band of other computers, Mac and Windows. For the past few months, I haven't been able to use Personal File Sharing or Printer Sharing to connect to the iMac. Some details:
1) Everything used to work about 6 months ago, but stopped... I don't know exactly when it stopped and I don't remember any installations/updates/etc that happened around that time.
2) I can't connect from a OS X 10.3 Powerbook to the iMac, but I can connect from the iMac to the Powerbook.
3) None of my Windows computers are able to do anything.
4. All of the computers have no trouble connecting to the Internet.
5. I don't know if this means anything, but the iMac beeps as soon as the desktop appears on startup and right before the desktop disappears on shutdown.
Does anyone have any ideas? Everything seems to be set up properly... the Sharing control panel shows that all Personal File Sharing, Windows Sharing, and Printer Sharing are all running.
Thanks,
Joe

Hi Joe, and a warm welcome to the discussions!
1. Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
2. Find the IP of the iMac in it's Network Pref Pane>TCP/IP tab. In finder, select Go menu>Connect to Servers..., then on the PB, type in afp://ip.of the iMac, like...
afp://10.0.1.5
afp://192.168.1.3
3. From Windows®, try...
smb://10.0.1.5
smb://192.168.1.3
5. Open Console as soon as it boots up, check for meaningful messages.

Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers

Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers
We have 4 Windows Server 2008 R2 print servers, all of which has the same printer queues installed on them that are utilized by a 3rd party printing program that does a round-robin load balancing scheme.
All printers are a combination of HP and Xerox all running some variation of the HP UPD and the Xerox UPD. Some use the PCL 5 and some use the PCL 6 version determined by age of printer and need.
There are typically two printer queues for each physical printer.
Example:
LOCATION_ROOM
LOCATION_ROOM_TRAY2
The regular queue is ok being left with default setting,
The _TRAY2 queues are set to print to "labels" or "pre-printed" paper type or a specific tray.
From time to time, these _TRAY2 queues will revert back to a factory default state and lose the setting to print to a specific paper type or tray. Sometimes it happens to the _TRAY2 queue on all 4 servers, sometimes just 1 server, etc. No rhyme
or reason.
Disabled Bi-directional options on both the HP and Xerox UPDs per another article on the internet that said bi-directional could cause the printer to send back settings to the driver and cause this issue. Even with this option off, we continue to see
printer _TRAY2 queue settings revert back to factory default and lose their specific paper and tray settings. We have ruled out the possibility that users or other technicians are the ones making these changes so we suspect it is some interaction between
the servers, printer drivers and printers themselves causing the issue.
Any insight would be greatly appreciated.

I'd start by using one of the print drivers included in Windows for a few of the printers and confirm it's the universal driver that is causing the issue.
HP installs some other processes and services on the machine which communicate with the HP devices.
PML and something else. You might want to shut those down and see if these processes are the ones modifying the settings.
Run process monitor to truly identify which processes is causing the modifications.
Alan Morris formerly with Windows Printing Team

KB2909210 on Server 2008 R2 breaks my intranet sites and print dialog box

Let's try this again. I have been asking the following question of Microsoft and every time I do, I have only been told to try another forum.
I have several intranet sites that my users use for various data entry and querying purposes. I installed Internet Explorer 10 onto my 2008 R2 Terminal Server over this past weekend (10/18/2014) which also installed the Security Update KB2909210
and rebooted the server. On Monday morning (10/20/2014), when my terminal users logged into the sites, the sites began malfunctioning. All the dropdown arrows turned into question marks. Some fields which normally have a small "x"
on the right-hand side used to erase the data entered in the text field were also displaying as question marks. The objects still functioned but it was disconcerting to my users. The update also slowed down these same intranet sites to where it
began interfering with productivity. I activated Compatibility View for all intranet sites, but it did not resolve the problem.
I also found that when my terminal users tried to print a pdf document from the intranet sites, the print dialog box was jumbled and no fields were pre-populated with data like they always are when printing. I updated to the latest Adobe Reader, but
the print dialog box remained jumbled.
All of my users with stand-alone PCs have IE 10 installed and the intranet sites work fine. The sites display properly and process quickly, and the print dialog box is not jumbled. It is only my terminal users who log in from a thin client
to their profiles on the server and use the IE version installed on the server who have the problem with IE10. The KB2909210 Update is not installed on, and does not come up as, an update for any of my stand-alone Windows 7 PCs.
I uninstalled IE 10 from my server, but since this was one of my production servers, I could not restart it until after the plant was shut down for the evening forcing my users to suffer with the slowness for the day. This morning (10/21/2014) the
intranet sites are working fine through IE 9. I also had to revert back to Adobe Reader v9.5 as the v11 (and v10) print dialog box does not display properly in IE 9.
I do not want to stay on IE 9 on my server as IE9 gets more un-secure by the day and we've found IE 11, on any of our machines, to be too buggy.
How can I install IE 10 with its security updates and prevent it from breaking my intranet sites and print dialog box? What is so different about Server 2008 R2 and Windows 7 that IE 10 causes this corruption of intranet sites and the print dialog
box on the Server but not on the Win 7 machines?
The bulletin here:
https://technet.microsoft.com/library/security/ms14-011
is useless for determining why it breaks my intranet sites. Nor does it explain why the update destroys the print dialog box.

Hi,
In my opinion, it's hard to say your problem caused by KB2909210. Have you tried to uninstall this update for test if your intrant site's problem resolved?
If your problem truthfuly caused by this updates, you can choose to hid the update as a workaround method.
Roger Lu
TechNet Community Support

Print servers for 30 client Mac Mini Lab

I have a 30 client Mac Mini lab with printing done by 2 networked HP Officejet 8600+ printers w/ 128mb memory. I would like to have a print server that will speed up the printing(kindergarteners can be impatient). A dozen years or so ago there were separate print servers that managed print requests and gave you only 1 queue to keep track of, but I haven't found one lately for 10.5. Will simply routing print requests to our current document server(PowerMac, Intel 2, 500gb) and giving it the 8600s' IP addresses give me the speed boost I need?

Okay, I have been able to recreate the error message by changing the Security Options for the Windows print queue (located in Properties > Ports > Configure Port). By default, the printer queue is set to use an anonymous account for the connection. When I changed the setting to use the "Windows logon name and password", I would get the error "Returning IPP client-error-not-authorized for Print-Job". This message was found in the cups error log, the print queue did not show an error - simply the job would not appear in the print queue and therefore there was no print.
The only problem I then encountered was when I changed the setting back to use the anonymous account, the error continued to occur - again only showing in cups. The only way I could resolve this was to delete the Windows queue, reset the printing system on the Mac and re-add the Canon printer (in my case an iP6000D). Then when I added the printer again on Win7 using the Bonjour Printer Wizard, I was able to print without error.
So, I suggest you first check that the anonymous account is being used on the Vista PC. If it is, then remove the Windows queue and reset the printing system on the Mac. To reset the printing system, Control-click on the Print & Fax > Printer list and select the reset pop-up. This will delete the Mac queue but not the driver. Now you can add the printer again on the Mac and once that is complete, go back to the PC and add the printer again.
One final note. My printer is using v10.26.x of the Canon driver. Version 10.19 was part of the default 10.6.0 install and can be updated to the same v10.26 by downloading the Canon Printer Driver Update v2.2.
Pahu

PDF Export And Printing Problem

I am using VB 2005 and the Crystal Reports that is bundled with it. I have reports on my website in the Crystal Report Viewer. I have the tool bar showing the Export and Print buttons. When you try to print (or export to PDF) you get an error from Adobe Reader "Adobe Reader could not open 'AcrXXX.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
I can see the file in my temp folder on my c-drive and the file (AcrXXX.tmp) does not contain a pdf instead it contains html for the report (including the report viewer). I tried deleting everything in my temp folder and I still get the error. My desktop is Adobe Reader 8.0 and IE 6 and Windows XP.
The same code will create the PDF on all development and test web servers just not on my production server.
I have no problem exporting a report to Word.

Hello Wendy,
if you are not too sure whether this errro is CR or VS related pls simply try to use one of our samples and see if you can export from htere or if you get the same error:
Sample site for NET:
https://boc.sdn.sap.com/dotnet/samples
general docu:
https://smpdl.sap-ag.de/~sapidp/012002523100005853792008E/walkthrough_supportfiles.zip
specific samples:
https://smpdl.sap-ag.de/~sapidp/012002523100006252712008E/csharp_web_smpl.exe
https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe

Can't print to hp p1006 laser printer

I just installed an hp p1006 laser printer on my airport extreme network. It installed fine. I sent one job to it and after that I wasn't able to print anything else. I tried re-installing it a number of times. It is recognized in the printer set up utility and in the print dialogue box. The selection box in the set-up utility seems to be greyed out. I set up the hp as a local printer and it prints fine. When I tried to re-install the existing canon mp530 the print set-up can't find it. Am I overlooking something simple?
maranathaguy

see response in a related thread, worked well for me
I have solved my issue with airport and printer loss of recognition. Open Airport Utility and install Firmware 7.2.1 over the top of 7.3.2. Firmware versions are in a simple drop down list. Steps are: 1) Open the 5.3.2 version of Airport Utility 2) Select the Airport Extreme icon in the picture list on the left 3) Click Manual Set-Up button at the bottom 4) Menu "Base Station" -> "Upload Firmware"
5) Select Firmware 7.2.1 from the dropdown list.

P1006 and print servers...

Similar Messages

Maybe you are looking for