P20-552 suddenly turns itself off..

I have a P20-552 (PSP26E-025E9-S4) which is about 18 months old and has recently begun to misbehave.
In particular, after a few minutes of some processor intense tasks (video file rendering) it suddenly turns itself off. No warnings, beeps, messages - just stops. Very worrying - anybody any idea why? Fortunately the guarantee doesn't run out until 2007.
One other issue, every few weeks or so I discover that when starting up, the keyboard simply does not work. Mouse is fine as is everything else, as far as I can see. So far a simple reboot has resolved that problem but would this indicate that there is something wrong deep down or is this something we are meant to live with?
Many thanks in advance for any suggestions and help.
Brian.

Hi
Well, it could be a overheating issue if the unit stops without any messages. The temperature goes high if the CPU works with a high performance.
In this case the first what I can suggest is to check the cooling vents. Try to clean I with vacuum cleaner.
Its not easy to say why the keyboard issue occurs. Its strange because after OS rebooting the keyboard works properly. Well, maybe a fresh OS solve the issue. But this is a only a suggestion.
Regards

Similar Messages

  • Why is iPad suddenly turning itself off when on any app? Battery is fully charged.

    Why is my iPad suddenly turning itself off when in any app?  Doesn't seem to be just one or two.  Battery is fully charged.  Screen goes dark. 

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

  • MBP Suddenly Turns Itself Off With No Warning/OS 10.5.8

    Recently my Early 2008 2.4 GhZ MBP running OS 10.5.8 has been shutting itself off without warning. Previously it would provide a warning when the battery hit 20% and then it would go to sleep at some point.
    The Finder Menu Bar battery indicator shows around 23% or one hour of power remaining. Coconut Battery shows:
    Original Capacity: 5600 mAh
    Remaining: 3473 mAh
    Load-Cycles: 90
    Age: 23 months
    This is a problem because data has been lost when this occurs. Any ideas about what may be happening? I still have around a year left on an extended AppleCare warranty...

    The new battery hasn't been used long enough for me to tell; I only installed it last night.
    My wife is the primary user of the affected MBP and she often uses it until it goes to sleep due to low power, so I anticipate having an answer in a week or two...
    Can the fact that my wife often ran down the old battery to such a low level have contributed to the development of this problem? What I find curious is that previously the MBP would simply go to sleep when the battery power got too low. And that quite a few MBP users are suddenly complaining about their Macs turning-off by themselves even when using new batteries...

  • My iphone 5 suddenly turned itself off and 48 hrs later it still wont charge or turn on. i've tried the home and sleep button technique and its still dead also i've tried the usb into my computer and tried to reset it through itunes that didnt work either

    iphone 5 turned off 48 hours ago it wont charge and it wont turn on. i've tried the sleep/home button method that didnt work nothing came up on the screen and also tried usb into computer and doing it through itunes that still hasnt worked my phone is completely lifeless! is there anything else i can possibly do before i have to go into the shop?

    Hi jscheilling,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • G4 suddenly turns itself off

    This has been happening for a couple of weeks now. I've replaced the battery, swapped out power cords, zapped the PRAM, but my G4 continues to abruptly shut itself down. I haven't been able to find anything consistent about what triggers this. Sometimes the computer is only on for a few minutes, then POOF! Other times it can be on for several hours before it decides it's had enough. It happens when working in different programs, different keystrokes, different users...Any suggestions?
    Thanks for any and all help,
    --Raven

    Hello! Once you've ruled out the simple stuff you start considering the more difficult to isolate such as the motherboard or PSU. Have you opened it up and reseated the ram and the video card? Do you have the hardware test disc that came with the computer? It might be able to isolate the problem. While opened up and running you might also gently wiggle the wires near the connectors. I had a machine once that kept shutting down and wouldn't restart then when I opened it up it booted fine but then when I closed it back up it wouldn't start. Open it back up and start fine. Turned out as a loose wire in one of the large multiple wire connectors. These things are are to find but the random shutdown points to a PSU problem or MB problem. Tom

  • My iPhone 5 has suddenly turned itself off and won't turn back on again. My lock button is also broke so holding the lock and home but together doesn't work. Any ideas? i'm desperate

    i can't get it to work, the screen is totally black and i've tried everything including charging, nothing is working

    Take the device to Apple for evaluation and likely replacement as there is obviously a hardware issue.
    I'm always amazed that people will leave with malfunctioning devices.

  • HP ZR2740W unexpected​ly turns itself off

    I have an HP ZR2740W which I bought in December 2011. It has been working flawlessly with my HP desktop HP Pavilion h8-1080t (with AMD Radion HD 6850) until today. Today after 30-60 minutes of use (time varies) the monitor suddenly turns itself off. Goes from blue light to no light. If I turn it back on it gives a brief screen shot and then goes off again. If I let it sit for a while I can turn it back on again for another episode.
    While it is working the picture quality is excellent. My room temperature is about 78F.
    Any idea if it is still in warranty? Or how much it would cost to fix it? Is this sort of problem even repairable?

    Hello Rgparker77,
    I understand you’re stating the monitors turns itself off completely, is that correct? I will be happy to help you.
    Most of HP’s equipment comes with at least a 1 year standard warranty some with a  2 year warranty. I am not sure if you ever did but there was an opportunity to get an extended warranty if you don't recall doing that.
    Because the online warranty checker doesn’t recognize the serial number, your best bet would be to contact the HP help desk. If you reside in the US or Canada the number is 1-800-474-6836, if you reside in another country click on this link and select your country and the number will be provided.
    If you are still covered under warranty most of the time HP just fully replaces the monitor, but again that is sometimes a case by case bases.
    I hope this information is helpful.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.

    Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.

    If that doesn't help, the battery may be dying and need replacement. See here (tap on Battery Replacement): http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Alternately, might consider start saving for a new iPad. The newest iPad 6 should come out in the next few months. When it does, sellers will want to get rid of old inventory with good deals.

  • Update: Video - Canon 6D turns itself off after a few shots with fully charged battery

    Update: I uploaded my video to youtube, please comment:
    http://youtu.be/3PNLUYd8g7A
    TIA and pardon me for my English.
    I posted this originally at another forum, and somebody suggested me to post it here as well, to get more help.
    Long story short, I purchased a brand new Canon 6D from B&H on Oct 24th, 2013. From early december, the camera starts to shut itself off randomly and displaying empty battery. I found the camera constantly shuts itself off after 20 - 100 continuous shots with a FULLY charged battery (right off charger, showing 8.23V using multimeter, and showing 98% in battery info).
    The camera will just turn itself off in the middle of shooting, showing empty battery int the shoulder window. The solution is simple, open the battery door, then close it again, no need even to pull the battery.
    So, I contacted Canon support, sent the camera to the VA service facility, waiting for it be repaired. As an engineer myself, I understand things fail, and I thought this is such an easy issue to reproduce, anybody should be able to repro it.
    Couple of days later, I received a phone call to send my accessories in, no problem, debugging needs more info, that's normal. I sent my lens and stuff in. I unfortunately had to bear the cruel fact that I don't have a decent camera for the holiday, though I have a backup.
    After a long wait, on 12/28the, the accessories were delivered at 9:35am. At 10am, they called me, they were sending the camera back. No issue at all. I was like, have you tested AT ALL? They didn't care, sending the camera back regardless. 
    I received the camera on Jan 2nd, and saw the same issue on that day. Of course, it was NOT fixed at all.
    I googled really hard, somebody said he had similar issue but it was a defective battery, so I got a brand new Canon battery, unfortunately, the same issue pops up again.
    Ok, the only choice for me is to send it back again.  But this time I am totally amazed by Canon.
    I sent the camera in again with my lens and battery. Also, a video showing the issue on a standalone CF card (I know 6D does not take CF, just to put the video on it).
    Couples of days later, they called asking for accessories, I was like, what accessories, I don't have any more.
    Then the camera sit in their facility for a few days for nothing. All of sudden I received a phone call on Monday morning, said it is ready. The camera has no issue at all.
    I called, asked whether they have watched the video, they told me two technicians, including a senior one, was not able to upload the video to the computer. I was like, what the hell? why the heck you need to upload it to the computer, find a card reader, plug the card in, double click, how simple is that?
    I talked to the service manager over the phone, he told me that there is nothing he could do, if their technician said so. They have decided to send my camera back, NOT fixed, again. I esclated the issue again, but haven't heard anything back yet.
    Honestly, I am totally pissed, how stupid can they be? I included a letter with detailed steps on how to reproduce this issue. As an engineer myself, I know how easy to reproduce this issue. But what shocked me is that they don't even know or they didn't even bother to watch the video. In the same letter, I asked/begged them to contact me if they cannot reproduce the issue instead of just sending it back unfixed.
    Guys, any other ways to get their attention? I already filed a BBB complaint. For a brand new camera of 3 months old, it has been in Canon's repair shop for almost a month. Leave to say that I missed the most importand holiday season in the year. This is simply not acceptable.

    "The camera usually shuts itself off after 20-100 continuous shot, ..."
    By this you mean your are in continuous drive? You just hold the shutter release down until it stops shooting?
    "... the shoulder LCD shows a ..."
    What is the "shoulder" LCD?
    Sorry for the extra questions but I am trying to understand exactly what you are going through and why Canon said it is OK.
    Canon did not say it was all right if it is not.
    You are, also saying, if you use the camera, just for a single snap shot, say several in a session, it is OK? Right?
    It only shuts down when on continuous drive or video?
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • How come iMessage turns itself off?

    Last night in the middle of a texting conversation iMessage turned itself off and switched to SMS. I had to manually go into settings and turn iMessage back on. I understand that if iMessage is not available, it will switch to SMS, but it usually switches back automatically. Does anyone know why this happened?
    Thanks, Anton
    iPhone 5
    16GB
    iOS 8.1

    Hello there anton9943,
    As I understand it, you were using Messages to send iMessages to another party, and suddenly the iMessage feature turned itself off, necessitating that you turn it back on in Settings. From what you describe, I would start by signing out of iMessage and FaceTime in Settings:
    If you have difficulty activating FaceTime or iMessage
    Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
    Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
    Then quit all the running apps on your phone:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device, sign back in to both services and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • The E7 turns itself OFF (and then restarts) when i...

    I proved it with complete accuracy.
    It happens as long as the Network Mode is set to either 3G or Dual Mode, regardless the presence and strength of GSM signal.
    Guess the trouble when you are driving and talking at the phone or using it as GPS device.
    All of a sudden it turns itself off and reboot/restarts.
    My E7 has Symbian Anna version 022.014
    I was wondering if this *serious* problem has been recognized and fixed yet.
    Can someone advise, please?
    Thanks...

    Hi paolopiace,
    Welcome to the Nokia forum.
    I'm sorry to hear you're experiencing some issues with your E7. Try a hard reset by entering *#7370# into your phone. The default security code is 12345. Don't forget to make a back up of your data as well so that you can easily move everything back onto the device after the reset. You can make a back up with Nokia Suite
    If this doesn't fix it, reinstall the current software with Nokia Suite. This should solve any errors in the phone. Belle will be rolling out soon as well, so if reinstalling Anna doesn't work you can try Belle instead, when it becomes available. 
    If, after trying all the above, the phone keeps switching itself off, I would definitely recommend bringing it to a local care centre where they can check it out and fix the issue for you. Your phone has a 24 month warranty period so this won't cost you anything. 
    You can find a local care centre by visiting your local Nokia web page and clicking on the Support tab. To find out the expiry date of your warranty, you can call your local care line. The only thing you need is your IMEI, which you can find by entering *#06# into your phone. The phone number for your local care line can also be found under the Support tab on your local Nokia web page.
    Let me know how you get on!
    Regards,
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • Airport turns itself off

    When I turn my computer on at home it will connect to my wireless network (Comcast through a Belkin router) for a few minutes, then all of a sudden the airport turns off. Trying to turn the airport on does nothing, and using the network assistant doesn't help (it says that the airport has failed). I can still connect to the internet using the ethernet cord from the wireless router after this has happened.
    If I restart the computer it will connect wirelessly again and work fine for a few minutes, then turn off again.
    The frustrating thing is that this does not happen at all when I am at work. It stays on wireless networks fine, and I've never had a problem there (so my technology support says they can't do anything).
    Any ideas out there? I'd really appreciate it.

    I have this exact same issue and it was driving me crazy.  I found this post and it looks like it may have worked although its still early to tell (20min).
    hey i had this problem where the airport fan turned itself off and would not turn back on. i rang apple and they had me go to finder, macintosh HD, Library, preferences, and then drag the folder "system config" to the desktop. leaving it there i had to restart and see if airport returned to normal, it did so i had to put that folder into the trash. and it stays connected now...hope this helps, let me know
    https://discussions.apple.com/message/8835572#8835572

  • IMessage Turns Itself Off

    Since the update my iMessage has been working fine, until today.  It keeps turning itself off and will stay off.  I've tried turinging it off and back on and even restarting my phone.  But nothing it keeps turning it self off.

    Hello there anton9943,
    As I understand it, you were using Messages to send iMessages to another party, and suddenly the iMessage feature turned itself off, necessitating that you turn it back on in Settings. From what you describe, I would start by signing out of iMessage and FaceTime in Settings:
    If you have difficulty activating FaceTime or iMessage
    Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
    Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
    Then quit all the running apps on your phone:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device, sign back in to both services and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Warning before PlayBook turns itself off

    It would be nice if the PlayBook would display a warning before it turns itself off due to the low batter charge. It's very annoying whn working on something it suddenly the PlayBook displays the "Powering off"-dialog and you didn't have a chance to save.
    Looking at your battery status isn't a solution, because apps are full-screen and when working I don't want to be bothered with manually check that status...
    Check out my apps in the BlackBerry World
    Visit my developer blogs /dev/alopix and /home/alopix
    BBM Channel: C0047B612
    Solved!
    Go to Solution.

    blheath2010 wrote:
    There is a low battery warning that displays and sounds an alarm when the battery gets low. Best thing to do would be to plug it in or save what you are working on right then.
    Thanks for the info, I have not run mine down below 20% yet.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Samsung Stratosphere turning itself off and on

    All of a sudden, my Stratosphere is caught in this loop of turning itself off (despite holding a full charge) and then trying to turn itself back on. For the last several hours, the screen has been alternating between black and black with the word "Samsung" on it. If I force the issue and hold the power button down for a few seconds, the phone will boot up fully, but then it'll either turn itself back off immediately or let me use it for a couple of minutes before turning itself off.
    My first thought was that it might be the battery, but I'm not keen on buying a new one just to find out that it's actually an issue with the phone itself. Does this sound like anything that anyone else has gone through?

    SW9-
    Unfortunately, this sounds like something I have gone through way too many times with my Stratosphere. I have lost count of how many replacements I have had to get because of this. If it starts working after the Hard Reset (mine did not but yours might work??), you will notice that the phone eventually will stop holding a charge.
    I suggest trying anything you can to get a new device as there are many discussions on the Verizon Customer Service website that are about the Samsung Stratosphere; if you search around, you will be able to see all of the fun issues that the device has. Good luck!

Maybe you are looking for

  • Migo based on sales order error -Require CO object

    Dear Experts, We have one process, Where we are creating sales order and based on sales order, we are doing migo and miro. final entry will be consumption a/c dr to vendor then we are doing billing for the same. We got error in migo based on sales or

  • Many Codecs are Missing  :(

    Hi why i dont have   this codecs anymore in my  AF CC ? H.264 and H.264 Blu-ray MPEG-2 MPEG-2 DVD MPEG-2 Blu-ray MPEG-4 And i am a CCould Member  so i dont use any trail version of the products !? please help

  • Ibook shuts off

    Hi everyone....... 2nd time posting same question.... Need some help. ibook was running fine (10.2.8) yesterday, put it to sleep last nite without a problem. Woke up this morning and the laptop was shutoff? When I tried to powerup it would startup fo

  • CC on Windows desktop and Mac laptop?

    Can I install CC on both a Windows desktop and Mac laptop and share files?

  • Scalability test and weblogic concurrent thread ability?

    Hi,every one Now I deployed .war into weblogic 10.3. I added some logs in the function dopost() begin and end position in .war applicaion. Then I began to send request from hundreds of HTTP C client at the same time to application sever to do the sca