P2P group conversation gets created, not cloud-bas...
using Skype 4.3.0.37 on Linux
newly created group conversations are P2P, not cloud-based. I kick all the participants, quit myself, recreate group conversation - and it is P2P again
how I create new group conversation:
I open chat with one of my contacts(1), then use "Add people" feature to add one more contact(2) - group conversation gets created, where there are three people - I, contact1 and contact2
I am checking conversation type using "/get name" command as its described here: https://support.skype.com/en/faq/FA10042/what-are-chat-commands-and-roles
(To check if your group is P2P or Cloud based, type /get name into the chat window and press Enter.
If the group name response starts with 19:... you're in a cloud-based chat; if the group name response starts with #skypename... you're in a P2P-based chat.)
There are 2 ways to move your group chat to the Cloud.
The Fork Way
Type /fork in your old group chat. That will instantly create a new group chat with all the participants of the old chat.
The URI Way
1) Create a new group chat with a few of the people from your old chat. 2-3 will suffice.
2) In this new chat, type /set options +JOINING_ENABLED
3) Then type /get uri. You will see a link appear in your chat - that is the URI of your new group chat.
4) Paste the URI in your old chat, and tell users to jump across by clicking on it.
Note that these options work best if every person is using the latest version of Skype.
Similar Messages
-
Why does the text gets created in tomcat base directory?
Hi friends,
can anybody tell me when i create a text file abc.txt from my servlet from the application base
c:\tomcat6\webapps\filterApplication\ ,
the text file gets created in c:\tomcat6\abc.txt
I want the text be created relative to the application i.e. c:\tomcat6\webapps\filterApplication\abc.txt , so that my
code will be portable.
In summary :
file being created => c:\tomcat6\abc.txt
expected location=> c:\tomcat6\webapps\filterApplication\abc.txt
my file write code within my servlet:
FileWriter fw = new FileWriter("abc.txt");
fw.write("Some entry text here---");
fw.close();
thx.
--Sujoyone query: if file is created relative to Java and Tomcat starts from bin directory, them
file should have been created in c:\tomcat6\bin\abc.txt,
NOT at c:\tomcat6\abc.txt
Am I write?
--Sujoy -
Sub node is not getting created
Hi Experts
I have IDOC to SOAP scenario, here the subnode is not getting created in the main node. please help me
Structure is given below
Source
Matmas
IDOC
e1m -
(1...9999 ) occurance
Target
Target
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
SUBNODE2 ---(1.) -- UNDER SUBNODE1
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Quesion 1.
now i want XMLDATA node to be repeated as many times as e1m comes from source along with both the subnodes 2 and 3 at target side.
but i could see only subnode2 is getting created not the subnode3 while testing.
May i know why is this happening.
I want the SUBNODE3 also be created.
Note the occurance of SUBNODE3 is 0.. unbounded
Question 2:
I want the SUBNODE3 also to be repeated as many times as e1m node comes from source.
For example:
e1m comes twice then the target should be as below
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
SUBNODE2 ---(1.) -- UNDER SUBNODE1
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
SUBNODE2 ---(1.) -- UNDER SUBNODE1
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Regards
LaraPlease see the below logic:
E1MARAM --> XMLNODE
E1MARAM --> useOneAsMany_customUDF -->SUBNODE3
E1MARAM/MATNR --> useOneAsMany_customUDF --> SUBNODE3/MATNR
E1MARAM/xyzfield --> useOneAsMany_customUDF --> SUBNODE3/xyzfield
Source:
<?xml version="1.0" encoding="UTF-8"?>
<MATMAS05>
<IDOC>
<E1MARAM>
<MATNR>123</MATNR>
</E1MARAM>
<E1MARAM>
<MATNR>1234</MATNR>
</E1MARAM>
</IDOC>
</MATMAS05>
Target
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Test xmlns:ns0="urn:test-2:test:area">
<XMLDATA>
<SUBNODE1>
<SUBNODE2/>
<SUBNODE3>
<MATNR>123</MATNR>
</SUBNODE3>
<SUBNODE3>
<MATNR>1234</MATNR>
</SUBNODE3>
</SUBNODE1>
</XMLDATA>
<XMLDATA>
<SUBNODE1>
<SUBNODE2/>
<SUBNODE3>
<MATNR>123</MATNR>
</SUBNODE3>
<SUBNODE3>
<MATNR>1234</MATNR>
</SUBNODE3>
</SUBNODE1>
</XMLDATA>
</ns0:MT_Test>
useOneAsMany_customUDF
for(int i =0;i<var1.length;i++)
for(int j=0;j<var1.length;j++)
result.addValue(var1[j]);
result.addContextChange();
Hope it helps! -
[Skype 7.0 Group Conversation] Picture
Hi,
Even though I change the group conversation picture, its not set on the client I'm using. I can see the new picture on a linux client, but not on a Windows 8.1, Skype 7.0.0.100 version client.
This is how the pictures look even though I have tried to change them several times:
http://puu.sh/dH0Yb/b20f09e443.png
Attachments:
ss+(2014-12-24+at+12.02.54).png 2 KBWith the latest Skype version, it's currently possible to edit profile pictures only for the new Cloud-based group chats. Profile pictures of the old P2P based group chats are still not visible.
http://community.skype.com/t5/Windows-desktop-client/Cannot-change-Group-Pictures/m-p/3798175#M3180... -
Purchase Requisition Is Being Getting Created In APO But not being publishe
On doing, SNP Location Heuristics on one of our item, purchase requisition is being getting created in APO (We are able to see the same in RRP3) but the same is not being getting published in ECC. On doing CCR of the said location - product combination, it is showing Error u201C182u201D. We have checked the following parameters :-
Item is an APO Item i.e. X0.
It is having a proper Purchasing Group.
As This be a purchase item. So, it is having a valid single Purchase Info Record.
Item Has Not Been Blocked At Any Level.
Vendor From Whom This Item is being getting procured is also open (Not Blocked).
Please suggest what else to be checked and what else can be the reason for non-flowing of purchase requisition from APO to ECC.
Thanks & Best Regards,
Sanjeev ChughHi Sanjeev,
Please check change pointers if any and send them to ECC. Check the order in the planning book whether it has picked the same source for which there is a Purchase info record. If these all are fine then You send them to ECC from the CCR then check the log in ECC through CFG1 tcode.
Regards,
Kishore k Reddy -
i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8
An update.
From iCloud Control Panel 2.1.1 for Windows
"iCloud Control Panel 2.1 and later includes support for Windows 8"
but you still need to set it up on a Mac or iOS device, "Note: To create an iCloud account you need an iPhone, iPad, or iPod touch with iOS 5 or later, or a Mac with OS X Lion v10.7.5 or later." -
SRM PR is not getting created in ECC backend
Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumaryes, i could see a PR number with all this additional details as below.
Table BBP_PDBEI
CLIENT 453 Client
GUID 4CAEFA58EB9D005CE1008000AC1C2031 Globally Unique identifier
BE_LOG_SYSTEM QA1400 Logical System of Logistics Backend
BE_OBJ_ITEM Follow-On Object Item in Back-End System
BE_OBJECT_TYPE BUS2105 Follow-On Document Object Type in Back-End System
BE_OBJECT_ID 2000000167 Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE Reference Object Type in Back-End System
BE_REFOBJ Reference Object in Back-End System
BE_REFOBJ_ITEM Reference Object Item in Back-End System
BE_REFOBJ_SBITM Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2 Reference Object Type in Back-End System
BE_REFOBJ2 Reference Object in Back-End System
BE_REFOBJ_ITEM2 Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2 0000 Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC Storage location
BE_PLANT 2016 Plant
BE_BATCH Batch Number
BE_VAL_TYPE Valuation type
BE_MOVE_REAS 0000 Reason for Movement
BE_EXPERYDATE 00000000 Shelf Life Expiration Date
BE_PUR_GROUP 206 Purchasing group
BE_PUR_ORG 2000 Purchasing organization
BE_CO_CODE 2000 Company Code
BE_DOC_TYPE CLRQ Purchase Requisition Document Type
BE_ACCREQUIRED Account Assignment for Logical Backend Required
BE_SP_STK_IND Key for Special Stock Section
BE_INFO_REC Number of purchasing info record
BE_MOVE_TYPE 201 Movement type (inventory management)
BE_PACKNO 0000000000 Package number
BE_INTROW 0000000000 Internal line number for limits
BE_ITEM_TEXT Short Text of a Service Purchase Order Item
BE_PO_PRICE 1 Price from Backend
BE_UNLOAD_PT 200 Unloading Point in Backend
BE_DEL_IND Deletion Indicator in Backend Documents
BE_TRACKING_NO Requirement Tracking Number
BE_COND_TYPE Condition Key
BE_COND_STEP 000 Level Number
BE_COND_COUNTER 00 Condition counter -
Group conversation pictures not displaying on new ...
I don't know if there's an option I'm not seeing but since I updated to the new skype preview, I cannot see group conversation pictures for any of the skype groups I'm in.
Clicking on the conversation topic loads up the profile for the group, and I can change the picture in there, but it will not display for me (even in the profile window I get the default 'no picture' picture).
Attachments:
skypenoconvopic.png 13 KBCan we please have the conversation picture visible to all participats of group conversations back?
And while you're at it, can we have (fubar) and (finger) and (hollest) back too?
One more thing - can we please have back the ability to adjust the size of the typing box? There is only one little line there now and one would like to be able to see at least 4 or 5 lines of the message you are typing.
When you update, the update should improve, not remove.
Thank you very much for this great app. -
Spool not getting created in batch job
Hello experts,
We have a requirement of printing BA00, BA01 and LD00 from different application.
We have done same code for all BA00, BA01, and LD00.
Normally the code is working fine except in few cases, when batch job is created but spool is not created.
DATA: job_name TYPE tbtcjob-jobname,
number TYPE tbtcjob-jobcount,
print_parameters TYPE pri_params,
wv_pripar TYPE pri_params,
wv_arcpar TYPE arc_params,
wv_val TYPE c VALUE 'X',
wv_false TYPE c VALUE 'X',
gv_mandt TYPE tsp01-rqclient,
gv_user TYPE tsp01-rqowner.
CLEAR: gv_mandt, gv_user, number.
gv_mandt = sy-mandt.
gv_user = sy-uname.
job_name = 'DELIVERY_PRINTING'.
CLEAR: range1.
range1-sign = 'I'.
range1-option = 'EQ'.
range1-low = 'LD00'.
CLEAR: range1-high.
APPEND range1 TO range.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = job_name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT sd70av2a WITH rg_kschl IN range
WITH rg_vbeln IN deli_tab
TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB job_name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = job_name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
WAIT UP TO 10 SECONDS.
** to give the data to the printer***
* CLEAR gv_rqident.
SELECT SINGLE listident INTO gv_listident FROM tbtcp
WHERE jobname = job_name
AND jobcount = number.
IF sy-subrc = 0.
MOVE gv_listident to gv_rqident.
CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
EXPORTING
spool_request_id = gv_rqident.
ENDIF.
The same code is for all the output BA00, BA01 and LD00.
The issue is that for few batch jobs (which is created in the above code) , spool is not getting created.
Thanks and Regards,
Paritosh PandeyHi,
The code starting from WAIT UP TO 10 SECONDS. - not only does it look attrocious, is error prone (if no free process for executing batch job is available for 10 seconds, or if the job runs for more than 10 seconds, what will happen...?), but seems utterly unnecessary... Is there any reason immediate spool output can not be handled by simply setting PRINT_PARAMETERS-PRIMM = 'X'?
cheers,
Janis
Edit in:
Ok, i just read Document in spool but not printed... Do not use an output device relying on frontend access methods to do printing from background processing. Frontend is not available during background processing, period. To my knowledge there is no easy, clean solution to this problem other than defining and assigning, per user, output devices not relying on frontend printing. What if the dialog user has logged off by the time batch job finishes..? May the spool remain unprinted?
Has the SAP Basis refused to define output devices (I have hard time believing this...)? Well, tell them one time to stop being silly and if they do not cooperate, tell the owner of the requirement that it can not be implemented due to uncooperative Basis then... and that the users will have to keep going to SP01 and manualy start the output!
Message was edited by: Jānis B -
Required attribute not getting created
Ok, here is a wierd one.
I have some custom ID management code (an SSO plug-in cert mapper and a WAR file I deploy to OC4J_SECURITY). The application provides a registration process that creates user entries and RADs for Oracle Forms app users. Everything works fine, except that I have found that my RAD creation does not get the orclresourceviewers attribute created automatically.
This has worked in my IM development farm. The attribute would be created automatically. It was difficult to figure out this was the reason my Forms App Server would fail with the following exception.
oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
I have gone through the motions of now preparing to query the OID Forms ID so that I can fill in this attribute in my RAD creation class. I still would like to know why this attribute is not getting created for me anymore.
Any ideas?
Oh and BTW, it did not help that orclresourceviewers is not documented anywhere I could find (not OID Admin and not Forms Deployment Guide)
regards,
ttHi Sandeep.
Yes, my application entities that I set up to manage a specific realm are used to create all RADs in a particular realm. As part of the setup for this I add these application entitites to the following three realms:
cn=OracleDASAdminGroup,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=RealmAdministrators,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=UserProxyPrivilege,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
I add to these so that the app entity could create, modify, delete and proxy to any realm user. I had to create an ACI to allow my entities to search and see the Forms Server application entity entry in order to populate orclresourceviewers.
I just wish I new why orclresourceviewers does not get created automatically. Of course, if I create the RAD in DAS or using the Oracle DynamicResourceCreate option, it is added. It has added it in my own RAD creation code at one point and it stopped for some reason.
I had to add an LDAP search to my RAD creation code with the possibility of multiple Forms Server entries (Logical Application Group) just in case. Much ado for something that maybe should not have been necessary.
regards,
tt -
IMessage iOS 8 "Leave group Conversation" not working
I've been trying to use the "Leave group Conversation" feature of the "Details" page of iMessage in iOS 8, and I cannot get it to work. I've reset my network settings, logged in and out of iCloud, and restarted the phone. No luck.
Is anyone else having the same problem?
thanks,
J.I read that everyone in the group messaging has to have iMessaging and their phone has to be updated to iSO 8. Oh it has to be 4 or more people in the group. Which really does not work for me because everyone in my contacts does not have an iPhone!
There are a few things to note with this feature however, leaving a conversation in Messages only works when all of those in the message thread are using iMessage – if it’s a group SMS, say there’s an Android user in the thread as well, you’re out of luck and can’t leave the chat. Keep that in mind if the texts keep popping up. -
Datasource is not getting created with jndi name though ANT
Please help me to come out of this problem. JDBC DATA SOURCE is getting created without jndi name when iam executing below ANT Script.
<?xml version="1.0" ?>
<project name="deploy" default="createDataSource" basedir=".">
<property name="weblogic.jar" location="C:/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar"/>
<property name="wls.username" value="weblogic" />
<property name="wls.password" value="weblogic" />
<property name="wls.url" value="t3://000.00.000.000:7001" />
<property name="wls.targetServer" value="AdminServer" />
<property name="wls.targetServer" value="soa_server1" />
<property name="wls.domainName" value="SOA" />
<property name="database.url" value="jdbc:oracle:thin:@000.00.000.000:7001:DEV" />
<property name="database.driver" value="oracle.jdbc.xa.client.OracleXADataSource" />
<property name="database.user" value="user" />
<property name="database.password" value="password" />
<taskdef name="wldeploy" classname="weblogic.ant.taskdefs.management.WLDeploy" classpath="${weblogic.jar}"/>
<taskdef name="wlconfig" classname="weblogic.ant.taskdefs.management.WLConfig" classpath="${weblogic.jar}"/>
<target name="createDataSource">
<wlconfig username="weblogic" password="webfsaD1" url="t3://000.00.000.000:7001:7001">
<query domain="SOA" type="Server" name="AdminServer" property="x" />
<create type="JDBCConnectionPool" name="TestScriptDS" >
<set attribute="CapacityIncrement" value="1"/>
<set attribute="DriverName" value="oracle.jdbc.xa.client.OracleXADataSource"/>
<set attribute="InitialCapacity" value="1"/>
<set attribute="MaxCapacity" value="10"/>
<set attribute="Password" value="Password"/>
<set attribute="Properties" value="user=user"/>
<set attribute="RefreshMinutes" value="0"/>
<set attribute="ShrinkPeriodMinutes" value="15"/>
<set attribute="ShrinkingEnabled" value="true"/>
<set attribute="TestConnectionsOnRelease" value="false"/>
<set attribute="TestConnectionsOnReserve" value="false"/>
<set attribute="TestTableName" value="SQL SELECT 1 FROM DUAL"/>
<set attribute="URL" value="${database.url}"/>
<set attribute="Targets" value="${x}" />
</create>
<create type="JDBCTxDataSource" name="TestScriptDS">
<set attribute="JNDINames" value="jdbc/testScriptDS"/>
<set attribute="PoolName" value="TestScriptDS"/>
<set attribute="Targets" value="${x}"/>
</create>
</wlconfig>
</target>
</project>
Thanks in advance,Thank u very much for ur quick reply.
C:\ANT_DataSource>ant -v
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: C:\ANT_DataSource\build.xml
Detected Java version: 1.6 in: C:\Oracle\Middleware\jdk160_24\jre
Detected OS: Windows 7
parsing buildfile C:\ANT_DataSource\build.xml with URI = file:/C:/ANT_DataSource/build.xml
Project base dir set to: C:\ANT_DataSource
parsing buildfile jar:file:/D:/ANT/apache-ant-1.8.2/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/D:/ANT/apache-ant-1.8.2/lib/ant.jar!/org/a
pache/tools/ant/antlib.xml from a zip file
Build sequence for target(s) `makeDataSource' is [makeDataSource]
Complete build sequence is [makeDataSource, ]
makeDataSource:
Property "AdminServer" has not been set
Property "SoaServer" has not been set
Property "AdminServer" has not been set
Property "SoaServer" has not been set
[wlconfig] QUERY -pattern SOA:*,Name=AdminServer,Type=Server
[wlconfig] Set size is 1
[wlconfig] QUERY -pattern SOA:*,Name=soa_server1,Type=Server
[wlconfig] Set size is 1
[wlconfig] Created MBEAN: SOA:Name=SampleDS,Type=JDBCConnectionPool
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Capa
cityIncrement 1
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Driv
erName oracle.jdbc.xa.client.OracleXADataSource
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Init
ialCapacity 0
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property MaxC
apacity 50
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Stat
ementTimeout 600
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Pass
word USER
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Prop
erties user=PASSWORD
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Refr
eshMinutes 0
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Shri
nkPeriodMinutes 15
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Shri
nkingEnabled true
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Test
ConnectionsOnRelease false
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Test
ConnectionsOnReserve false
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Test
ConnectionsOnCreate true
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Test
TableName SQL SELECT 1 FROM DUAL
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property URL
jdbc:oracle:thin:@100.10.000.100:1601:DEVDB
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCConnectionPool -property Targ
ets SOA:Name=AdminServer,Type=Server;SOA:Name=soa_server1,Type=Server
[wlconfig] Ok
[wlconfig] Created MBEAN: SOA:Name=SampleDS,Type=JDBCTxDataSource
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCTxDataSource -property JNDINa
me jdbc/SampleDS
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCTxDataSource -property PoolNa
me SampleDS
[wlconfig] Ok
[wlconfig] SET -mbean SOA:Name=SampleDS,Type=JDBCTxDataSource -property Target
s SOA:Name=AdminServer,Type=Server;SOA:Name=soa_server1,Type=Server
[wlconfig] Ok
[wlconfig] QUERY -pattern SOA:*,Name=AdminServer,Type=WebServer
[wlconfig] Set size is 1
[wlconfig] SET -mbean SOA:Name=AdminServer,Type=WebServer,Server=AdminServer -p
roperty LogFileName logs/access.log
[wlconfig] Ok
BUILD SUCCESSFUL
Total time: 41 seconds
Edited by: soa.dev on 12-Sep-2012 02:09 -
Transport Request Not getting created automatically
Dear Sir,
We are facing a problem related to , Transport Request not getting created automatically during the SPRO change activities . We have to manually create the Transport Request and then changes need to be included in the request individually on the manual basis .
However earlier , we had no such problem and Transport Request were getting created perfactly .
We request you to kindly help us on this issue pl .
Rgds
Sonia AgarwalHi Sonia,
This is purely because of the client settings. Your client settings are in such a way that the cghanges are not getting captured. As mentioned by Naveed, check to see the client settings and change the settings if needed.
FYI: The SandBox clients will have the client settings as in ur system now.
Regards,
Varadharajan M -
Infotype 1000, Position data IDOC is not getting created via RBDMIDOC
Hi All,
We are using PFAL styandard HRMD_A message type, while executing RBDMIDOC with message type HRMD_A, all the infotypes data IDOC is created except Infotype 1000 Position(S).
The same is (Infotype 1000, position IDOC is created in dev server) but the same is not getting created in Quality and Prod.
Can any one suggest the same, what could be the error.
Thanks.Hi,
You need to check in your filter settings in BD64 for your corresponding distribution model, if you have included IT1000 for PD objects such as O, C, S. After adding this filter group, you have to distribute the source system into the target system (Edit > Model view> distribute). In the target system, you have to generate partner profiles (environment> generate partner profiles).
Hope it helps,
Christine -
Group conversation not working in Skype 7.10 (777)
I have updated my Skype to Version 7.10 (777) this morning and since then not able to post and receive messages in group conversation.I tried even creating new groups but issue still remains.Can somebody please let me know how to resolve this issue?
Try reinstalling your skype again for a start?
if not there are costume sounds to each notification
Skype> Preferences > Notifications > Details
Go to Event and from the drop down menu and select "First message in conversation" for instance Go the drop down menu in Play Sound and try any of the sounds again or upload your custom sound .
Hope it works out.
cheers x
Attachments:
Screen Shot 2014-10-23 at 1.26.26 PM.png 55 KB
Maybe you are looking for
-
this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package how can i istaller itunes in my laptop windows 7 64 bi
-
Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?
-
How to add the REFRESH button in OOPs ALV grid
how to add the REFRESH button in OOPs ALV grid
-
ITunes won't read/burn CD's
As of today, my iMac, with the most recent version of iTunes, stopped recognizing commercially bought CD's that play fine elsewhere. I insert a CD, it spins for a few seconds, then spits back out. I've tried restarting the computer, tried multiple
-
How can i run servlet in netbeans
i am new to jsp & servlet. i am using netbeans 6.5 and tocat. i can not understand wehere to save the jsp & servlet files.please help me.