Package loading error

Hi guys and girls
I have develoed sim toolkit applet to send sms,its complied sucessfully and also converted successfully.But when i am loding this applet to
java card its giving error like this:
[b]error:package loading failed !
loading ended with error:loading process failed1 !
i am using simera 3 classic323 vodafone javacard.
any suggestions will be highly appriciated.

Hi,
The selection condition is only planning version 700. There is no other selection conditions.
I checked the process monitor and I can only find error messages Time Period Invalid and Errors in Source system. This error messages are not enough for trouble shooting.
thanks and regards
Murugesan

Similar Messages

Package Load Errors

I installed Sql Server Express Advanced today, and decided to install the toolkit as well. When I open Business Intelligence Development Studio, I get the "Package Load Failure" for the 'ReportDesignerPackage' and 'DataWarehouse VSIntegration layer' packages. I can't seem to find any recent clogs or forum responses that address this issue, and the older ones (most are from 2005) haven't solved the problem. Do I have to reinstall everything???
Thanks,
Joe

Hi,
We need to full error message + the error log, in order to understand the problem. But my first gusse is that you are trying to open a Business Intelligence Package which is not supported in SQL Express.
[Personal Site] [Blog] [Facebook]

Failed to load Execute Package Task error.

Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.

As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Package-query: error while loading shared libraries: libcurl.so.4: can

Hi all
when i run yaourt to install any things :
package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
why?
what can i do?
I'm very newbie so help me with easy commands!
thanks

try to reinstall yahourt :
https://wiki.archlinux.org/index.php/Yaourt

Package Load Failure message in VS 2005 and Error: WIJ 20002

After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
Package Load Failure
Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
"The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
The Java version I have is 6 and I checked the Universe is not locked.
Need help to identify the cause for both errors.

Try the following as posted on another forum:
Two solutions:
1. -Go in to the Tools menu in .NET, and choose Import and Export Settings.
- From the dialogue box, choose Reset All Settings and follow the steps
2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
Regards,
Jonathan

Error building project using kXML2 - "Class loading error: Wrong name"

Hi,
I'm testing the XML-Parser KXML2 and downloaded the latest package, but the minimal version (kxml2-min.zip). I put this file into the directory "%j2mewtk%\apps\KxmlTest\lib" and wrote the lines
import org.kxml2.io.*;
import org.xmlpull.v1.*;
When I try to build the project with the Wireless Toolkit (v1.04) it spits out the following error:
Error preverifying class kxml2.io.KXmlParser
Class loading error: Wrong name
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
I also tried the full package "kxml2.zip" but the same error occurs.
How can I get rid of this? Thanks in advance!

Okay, finally worked it out (hopefully). I unpacked the archive to a directory (say "%J2MEWTK%\apps\KxmlTest\tmpclasses") and then preverified them "manually":
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.kxml2.io.KXmlParser
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParser
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParserException
Then I packed them again to a jar-file:
%J2SDK%\bin\jar.exe -cvf kxml2-min.jar %J2MEWTK%\apps\KxmlTest\tmpclasses\output\.
That was all!

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Package load Failed! Invalid package Title, manifest file cannot be found

Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AM

Hi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian

6i can't find waveform peak detection vi. Load error code 20

6i can't find waveform peak detection vi. Load error code 20

The waveform peak detection VI is found only in the Full and Professional development systems. Do you have the base package?

Application Loader error, how to submit app for approval

Firstly, here's my info:
1) App is for iPad and iPhone/iPod Touch
2) Build using Flash CS 5 (Windows), packaged using Air 2.6 using ADT.
3) Successfully build and tested my .ipa file.
4) I just got a Mac OSX (I'm new to Mac) for submitting to Apple for approval.
When I submit my app using the Application Loader:
Error is: "Application failed codesign verification. The signature was invalid, or it was not signed with an Apple submission cartificate"
(read that I need to rename my .ipa to .zip and submit that, but it still gave the error)
Forgive me if this has been answered before, but it's bits and pieces of tips all over.
And I don't understand why I need to manually hack files when Adobe claims Flash can develope apps for iOS.
- ok, yes Flash can develope iOS apps, but with that statement, don't we all presume we can also submit it to the App store?
I've spent months optimizing the app from PFI builds to now using AIR 2.6.
Bought all the devices to test on. Now that I'm ready to submit it to Apple, I'm hitting the wall again.
I've gone through lots of tips but none works for me.
Can someone give step by step instructions?
Thanks,
-alfred

Ok, it was sweet while it lasted
Apple sent an email:
"Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target."
I'm sure I used the Distribution certs.
Since I'm using Flash and not Xcode, what are the possible problems?
I used adt -package -target ipa-app-store ....
-alfred

Package Load Failure VS 2008 Architect & 11.1.0.6.20

I have a virtual machine running Windows Server 2003, IIS, and Visual Studio 2008 Team Architect.
When I try to install "ODAC 11.1.0.6.20 with Oracle Developer Tools for Visual Studio" I get an error "Could not start the OracleMTSRecoveryService service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fassion." I hit "Ignore" and the installation completes.
Then when I run Visual Studio and select "Run SQL*Plus Script" I get:
Package Load Failure
Package 'Oracle Develper Tools for Visual Studio .Net' has failed to load properly...
I have uninstalled and reinstalled without the MTS Recovery Service and get the same error.
Any suggestions on getting this to work?

I started visual studio with logging turned on. Here are the results from the log file:
<entry>
<record>60</record>
<time>2008/01/18 19:14:09.974</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>61</record>
<time>2008/01/18 19:14:11.026</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>62</record>
<time>2008/01/18 19:14:11.056</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Begin package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>63</record>
<time>2008/01/18 19:14:16.273</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>SetSite failed for package [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>
<entry>
<record>64</record>
<time>2008/01/18 19:14:16.313</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>End package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>

AIR 15.0 for OSX - ADT: Packaging failed. Packager internal error

Packaging a SWF to AIR with captive runtime and native installer (using "-package bundle"), building on PC worked perfectly fine. After making all of the requisite changes to make it work for Mac, I'm now running into the "Packaging failed. Packager internal error" when building using adt through the command line. My .command script is as follows:
cd [directory]
adt -package -storetype pkcs12 -keystore ../cert/key.p12 -storepass pw -target bundle Bundle ../App.xml App.swf -extdir ../lib icons/16.png icons/32.png icons/128.png
What can cause this vague "Packger interal error" error? Any help would be appreciated. Thank you.

Steve
I have same problem with apple Developer Id Application certificate (downloaded from apple), got past the chain error message by including intermediate and root certificates when I exported from keychain, but got the package error referenced here. Also when I sign on windows machine with my code signing certificate (selecting windows installer) all publishes ok, but the certificate is not attached, says 'unknown developer' when I down load and try and run installer on windows machine. I sent the exe to Comodo (the guys I got the code signing certificate from) and they say the exe is not signed.
Finally I get 'The digital certificate is invalid' error when I try and use 'Developer Id Installer' certificate (downloaded from apple).
I think there must be several problems here with Air SDK.
Stopping me from publishing and I have a very upset Customer. Can someone from Adobe please advise asap.

"URGENT"Infopackage load error in process chian after upgrade

Hi Gurus,
We have a strange issue in one of the process chain after upgrade from 3.5 to NW 2004s. In a process chain we have 5 info packages, 3 in parallel as they load data in 3 different cubes and 2 in series after successful completion of info packages on top.
Now the process chain shows red info package with error message Last delta upload not yet completed. Cancel
When we check the RSMO, we find all the 3 loads on top finish successfully while in process chain log display as error at info package with above error message and process chain never advances. Actually loads finish successfully but process chain shows error in info package.
When we investigated further, the request ID in failed info package in process chain shows different ID which never loaded in cube but data load takes place successfully using different request ID(checked in RSMO and request in cube).
I suppose the process chain trigger the info package load twice simultaneously, one load get successful and second load request failed in log as first one is runningthis is my guess
Please help me as this is an urgent issue.
Regards,
Anil

Hi All,
We fond the root cause of the error message. Actually when we trigger the process chain, the info packages loads get triggered twice after an interval or around 2 minutes.
Here if zero records are loaded then second request ( after 2 min) get loaded too with zero records but if first request is loading some records then second request will find the data load still running and will throw error as last delta still not finished.
Have you seen this scenario before?
Regards,
Anil

Package Load Failue

I have just downloaded the most recent ODT for Visual Studio 2005, and have encountered a Package Load Failure. I have uninstalled the previous version, as well as Visual Studio 2005, then cleaned the registry, multiple times only to get the following error:
Package Load Failure
Package 'Oracle Developer Tools for Visual Studio. NET' has failed to load properly (GUID = {D601BB95-E404-4A8E-9F24-5C1A462426CE}). Please contact package vender for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future?....
Anyone have advice?

What version of ODT did you install before - 10.1.0.4 or 10.2.0.2.20 ?
10.2.0.2
Did you uninstall the previous version of ODT ? If yes, how did you uninstall ?
Yes, with the remove feature in the installer. Then I did a registry clean with ccleaner
Did you install ODT 11g Beta2 in the same directory where you had installed your previous version of ODT ?
Tried both yes and no
What edition of VS2005 are you using - professional, enterprise etc.
VS2005 Team Edition for Software Developers
Do you have VS2005 SP1 installed ?
Yes

Package Load Failure, no beta versions of anything

Hi,
I get a "Package Load Failure" when starting VS2008. I've tried everything I can
possibly think of, including reading about the problem in this forum, but nothing
helps. The installation has installed five different asseblies correctly (as far as
I can see) in the GAC, two for Oracle.DataAccess, and one each for the others.
To avoid problems, I made completely fresh install of Windows Vista Ultimate, then
I installed all security updates from MS, then VS 2008, then ODT 1110620. No betas
has been installed at any point.
I got one error message during install of ODT, "The request to star the service
OracleMTSRecoveryService has timed out", but I dont think that should matter for
this problem.
Are there any other things to try to get ODT to work? I would appreciate any help I can get.
The guid in the error message when staring VS 2008 is "D601BB95-E404-4A8E-9F24-5C1A462426CE".
Regards,
Carl

Hi
I run the 'gacutil /l | findstr Oracle' and that result seemed OK. I post the output here:
Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Management.Omo, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.VsDevTools, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.102.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.111.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=x86
Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.1.102.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.1.111.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.10.1.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.10.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.9.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
It is by the way VS 2008 (not 2005), if that makes any difference. I did not try to reregister the assemblies since they seemed OK (but my path to them are a bit different not c:\Oracle\Product, but c:\Oracle\Developer\Product because Developer is the users username (default with Oracle installer), but I did the 'devenv /setup' but that did not help.
regards
Carl

Package loading error

Similar Messages

Maybe you are looking for