Packages are NOT transferring to new DP after adding it to a DP group - WHY!!!?

I am in the midst of trying to put together a Windows 8.1 DP and when I check the Distmgr.log, everything looks fine. Then when I add it to a DP group that my primary DP is a member of for the simple purpose of having those packages transferred over to the
new DP, I don't see any packages at all under the Content tab of the DP properties for the new Windows 8.1 DP with the exception of the Configuration Manager Client Package. Also, I created an AD group and named it SCCM Site Servers and I added my Site Server
to that and then added that group to the local admins group on the Windows 8.1 DP. 
I need some help in determining why packages are not getting transferred, please HELP!
Here is what I am referring to:
When I check the pkgxfermgr.log, I see the following errors:

Thanks for the response, Jeff, I appreciate it. 
Yes sir, that is what I stated initially up above in the posting:
Also, I created an AD group and named it SCCM Site Servers and I added my Site Server to that and then added that group to the local admins group on the Windows 8.1 DP. 
Any other ideas what could be causing this? 
I have never seen this before, obviously, so I am a tad stumped. 
Thanks for your help

Similar Messages

  • HT1688 My purchased ringtones are not on my new Iphone after syncing. How do I get them back?

    My purchased ringtones are not on my new IPhone after syncing How do I get them back? ITunes store said I had already purchased - would I like to purchase again?

    Thanks for that babowa. If I add my Yahoo account it just goes straight to MacMail and says I already have an account. There seems to be no basic problem with mails going between Macmail and Yahoo. It is just the folders that have disappeared, while MacMail was out of action. I don't think those particular folders were ever on the Yahoo mail that I access through BT, they were just on the MacMail under "Yahoo" as opposed to "On my Mac". I am worried in case I lose what I already have if I press "Restore" from my back up. As you can see, I am not exactly good at this!

  • My photos are not transferring to my laptop via photostream/Icloud any suggestions as to why?

    I thought my pictures from my Iphone 4s and Ipad should transfer to my laptop which I have Icloud.. they aren't, any suggestions??

    Existing photos when a device's photo stream is turned on do not sync to photo stream.  Only subsequent photos are added to the stream. 
    For existing photos, you must sync them to a computer via itunes setup.

  • All the SSIS Packages are not editable to the all users after deploying to the other server

    Hi All,
    I am using sqlserver2012.
    How to make all the SSIS Packages are not editable to all users after deploying to the other server. is there any way to achieve this,
    if yes, could share the information how to do....
    Thanks in advance....
    RamarajuC

    Typically, you change the protection level as listed in the following steps:
    During development, leave the protection level of packages set to the default value,
    EncryptSensitiveWithUserKey. This setting helps ensure that only the developer sees sensitive values in the package. Or, you can consider using
    EncryptAllWithUserKey, or DontSaveSensitive.
    When it is time to deploy the packages, you have to change the protection level to one that does not depend on the developer's user key. Therefore you typically have to select
    EncryptSensitiveWithPassword, or EncryptAllWithPassword. Encrypt the packages by assigning a temporary strong password that is also known to the operations team in the production environment.
    After the packages have been deployed to the production environment, the operations team can re-encrypt the deployed packages by assigning a strong password that is known only to them. Or, they can encrypt the deployed packages by selecting
    EncryptSensitiveWithUserKey or EncryptAllWithUserKey, and using the local credentials of the account that will run the packages.
    Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Changes to order are not transferred

    Hi,
    our PPDS users are facing an issue in Product Planning Table ( transaction /sapapo/ppt1).
    When we create a planned order and convert to production orders, the system converts with out any issues.
    After some time when we drag the production order to a new time ( in DS board), fix the order, then when we save, we get the message " Changes to order 100065265 are not transferred" and the order moves back to where it was... The  # 100065265 is our production order in created status.
    Looking at the error details, I thought there are some changes to the order being done in R/3, but there were no changes to that order in R/3 at that point and the same change, if done after some time goes through...
    This is happening almost for every order and it's annoying to keep click ok on this order, wait and then reprocess again...some time we get the error multiple time before the system accepts the changes...
    Any idea on what might be happening?
    More details about the error,
    ===
    Changes to order 100065265 are not transferred
    Message no. /sapapo/cdpssimulati015
    Diagnosis:
    The changes made to the order 100065265 in SAP APO can not be transferred as the order has already been changed by the linked R/3 system
    System Response:
    If you have made minor changes to an order in SAP APO and changes to this order are simultaneously being transferred from the R/3 system, only the changes from the R/3 system are adopted. The changes you made to the order manually in SAP APO are lost
    In technical information, I see the application area as /SAPAPO/SIMULATI, MESSAGE # 015 and main program SAPLSHL2.
    Thanks,K

    Hi,
    It seems the production order details are getting updated in ECC with order related settings you maintained at ECC, like settlement profile, etc., During that time, if you try to change the production order in APO, since the ECC update for the order is not yet completed, it gives the error. Thats why after sometime, when you change the production order, it allows you to change.
    Please try this, once you convert the order in APO, go to ECC and try to open the order in CO02 or CO03, it will give you an error the order is already being processed by XXXX. If so, then it is the time taking to update the production order in ECC.
    Also, try this, once you convert the order, immediately save and after sometime you change the time.
    Please check and revert.
    Regards,
    Manimaran M.

  • HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK.  Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

    I have a problem.
    I bought Pages and Numbers for my iMac and so far everything was OK.
    Suddenly i have a problem with connection to iCloud.
    Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign  (small shape of iCloud), that they are waiting to be uploaded to iCloud.
    I think the iCloud is OK.
    i can see and manage documents in iCloud. i can create them on iPad and  see them and delete them in iCloud.
    But not on iMac.
    i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

    I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • Serial numbers are not copied to new storage location for 311 mvt type

    Hi Guys
    I have 10 stock of material A in 001 Storage location ,which all the quantity is serial number managed
    I have transfered 10 quantity of Material A to 002 location from 001 location using 311 MIGO
    But serial numbers are not copied to 002 location after transfer posting
    001 and 002 are both are WM linked and belongs to same plant
    Can any body suggest good solution,how it can be done

    Hi
    1.Check in material master whether serial number management is active in Plant data/stor Tab and serial number profile is assigned
    2. Check while doing MIGO once if u enter the material and transfer qty you are getting the serial number tab or not
    3. If everything is ok, then after posting the document check the serial number status in IQ09, check the stock type and the storgae location in the serdata tab
    Regards
    Amuthan M

  • HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

    Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

    Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

  • Files Are Not Transferring Correctly from Captivate 4 to 5

    My files from Captivate 4 are not transferring correctly into Captivate 5.  The images and quiz questions are not in the same place. Help!

    This is a bug.
    We all have it.
    Keep CP4 for the old courses, and develop new ones in CP5. That is what I am doing.
    Alternative is to manually adjust everything (don't even get me started on rollovers...)
    Terry

  • My photos are not transferring over from iCloud

    My photos are not transferring over from iCloud.I have put my device back to factory settings and still they will not transfer over.The only device all my photos are still on is my iPhone.

    If it appears to not be making any progress even though you have a strong wifi signal, sometimes turning the phone off, then back on will get things going again.  Otherwise about all you can do is try restoring the backup again.  If you still have the old phone, you could also try creating an iTunes backup, then restoring that backup to your new phone.

  • HT1351 My 2nd generation iPod Nano is not showing my new playlists after syncing (the playlists were created in my computer).  Help!

    My 2nd generation iPod Nano is not showing my new playlists after syncing (the playlists were created in my computer).  Help!

    So, your iPhone (and new shuffle) still work properly with iTunes, correct? 
    Your 1st gen shuffle... It's the white one with USB plug, that looks like a USB flash drive...?
    Are you able to see it in Windows, and maybe change the drive letter back to E:?

  • SCCM 2007 Package are not getting distributed to 1 DP.

    HI Guys,
    I am fairly new to SCCM.
    I have noticed packages are not getting distributed to one of my DP. I find the below in distmgr.log
    Cannot establish connection to ["Display=\\xxxxxxxxxx\"]MSWNET:["SMS_SITE=xxx"]\\xxxxxxxxx\
    This is what i have checked till so far.
    1] Site server has local Admin right on the DP.
    2] All Services are running on Local system and network service where needed.
    3] I can access share from DP to Site server and Site server to DP.
    Any suggestion would be helpful.

    Hi,
    Check out this troubleshooting guides..
    http://blogs.technet.com/b/microsoft_denmark_premier_field_engineering_config_manager_blog/archive/2011/07/08/config-manager-2007-distribution-manager-cannot-establish-connection-to-remote-distribution-point.aspx
    http://anoopcnair.com/2011/05/30/configmgr-sccm-packages-are-not-getting-updated-on-new-site-system-distriution-point-domain-controller/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • HT4061 I need to sync my iphone and ipad to my new computer.  I just downnloaded itunes in it.  my song and album files are not in the new downloaded itunes.  how do I import them in?

    I just downloaded itunes on my new computer which uses Windows 7. I need to sync my ipone 4S and ipad to it.  I noticed my complete song and album files are not in the new itunes.  how do i get them imported to the new itunes.  Would syncing my iphone and ipad do it?

    In iTunes, go to File>Add File to Library or File>Add Folder to Library.

Maybe you are looking for

  • Flex 3 GA Designer doesn't work with my modules

    This is absolutely critical to our application. In Flex 3 Beta I had no issues doing this, in Flex 3 GA it does not work and I'm wondering if any of you have seen this issue. I have extended Module to MyModule and added code that I need. My Flex buil

  • Use of case  in an insert statement...

    Hi , i have an insert statement in a db packaged procedure which needs a case statement to be used..... I want to use the case in a statement like the following... insert into x(a,b,c,d,e) values(a,b,case b='1' then c_val , d_val , null else null , n

  • PC Shutting Down when Rendering

    I have used Premiere for many years/versions now and have had a persistent problem of the computer shutting down while rendering, regardless of the system. My current computer is a laptop (Clevo 900DF for those familiar with that brand) with the foll

  • How can I troubleshoot a malfunctioning Microphone

    Microphone not working for Siri, or Talk to text, or video camera but it is working for the Recorder.  Sometimes works for Speakerphone.

  • Can't open CR 2 in PSE 8

    Can anyone help me open CR 2 photos.  I am new to PSE and would like to try editing RAW.  I have a Canon EOS XSI and am using PSE 8.  When I download  the files they are a white piece of paper .CR2.  I have tried updating the software but feel that I