Packages from CVS?

Hi guys,
i have one quick question. i am new to Arch, so please excuse me if that was already asked.
Is it possible to make packages from CVS?
thanks for the help, Shemeta

Shemeta,
Yes, as a matter of fact the latest version of reiserfsprongs we have is causing some trouble - a bug, apparently, that the package creator has been advised about. I tried to run reiserfsck --check /dev/xxx in single user mode doing routine maintenance this afternoon and couldn't. For the time being, therefore, I decided to downgrade one version so copied the CVS package for the earlier version to the existing PKGBUILD in /var/abs/base/reiserfsprogs, changed to that directory, ran makepkg -bci and voila. Now I should tell you that this practice might not work every time because urls for source code change on occasion or for perhaps other reasons. Today, however, that was not a problem and I was able to run file system checks on my network. Having CVS was a lifesaver today.
jlowell

Similar Messages

Remote execution of DTS packages from Java Stored Procedures

I'm an Oracle 10G DBA and Linux/Unix Sysadmin looking for a Java guru to help me find a reusable template or locate a solid programming methodology (examples) that will enable me to connect via JDSI to SQL Server 2000/2005 and remotely execute DTS packages from within Oracle. I am working at office that's absolutely addicted to MicroSlop products and the DBA team cannot conceive of giving up their precious DTS packages. I've already converted their MS SQL Server 2000 database to Oracle 10G on RHEL4 via SQLDeveloper but I am unschooled in the art of java programming and would like to locate some sort of rudimentary template or examples or java class that can easily be loaded into the Oracle 10G database instance via the loadjava utility. These java classes/methods/stored procedures need to be executable from within embedded PL/SQL code and able to connect to SQL Server 2000 to execute DTS packages via passing dtsrun commands ... Any help or direction would be greatly appreciated.

Hi Ilford:
Sure you can use fully package notation in your Java classes.
Look at this Java source code:
http://dbprism.cvs.sourceforge.net/dbprism/cms-2.1/src/com/prism/cms/core/
All of them are Java Stored procedures.
Best regards, Marcelo.

Compiling application (with several sub-packages) from another java app

Hi,
I'm writing my own build tool and need to be able to compile an external application (pulled from cvs, subversion, ...) from within this build tool.
Probably I need to use com.sun.tools.javac.Main.compile ?
But how do I pass classpath, output dir, etc to this class and how can I make it compile all files in all (sub)packages of the given folder ?
thanks for any help.

Never mind my previous post, I found a solution to the "the input line is too long" problem:
Putting all the files in a temporary file and then providing that file as the source to compile, like this:
javac -g:none -cp <classpath> -d classes @sourcefiles.txtwhere sourcefiles.txt is the name of the temporary file that contains the names of the source files (note the "@"-prefix)
For some reason, this is not mentioned/documented in the java docs (at least not in my docs)
Ok, so everything is compiling now, but I have one problem remaining:
For each "module" that I compile (the application I use for my tests consists of several "modules", i.e. subpackages), I get an error stating that "The system cannot find the path specified"
This seems obvious, because it is trying to write a file <package-name>\classes\<package-name>\<classname>.class
But why is it trying to write that file ?
-> Is this a known bug or something ?
Let me explain a little more...
For each compilation I do using the com.sun.tools.javac.Main.compile() method, it is giving this error.
Everything is compiling correctly, but it seems it is trying to write an extra class file to a wrong path.
Until now, it was always the first file in the row that gave the problem.
Example:
** module 1:
sources/com/example/module1/class1.java
sources/com/example/module1/class2.java
sources/com/example/module1/class3.java
sources/com/example/module1/sub1/subclass1.java
sources/com/example/module1/sub1/subclass2.java
sources/com/example/module1/sub1/subclass3.java
** module 2:
sources/com/example/module2/class1.java
sources/com/example/module2/class2.java
sources/com/example/module2/class3.java
sources/com/example/module2/sub1/subclass1.java
sources/com/example/module2/sub1/subclass2.java
sources/com/example/module2/sub1/subclass3.java
=> My application will compile module 1, do some other things with it and the module 2 and again do some other things with it.
The result would be:
Application started.
Loading configuration: OK
Compiling sources for module module1: E:\temp\_User_\project\packaging\workingdir\source\com/example/module1\class1.java:12: error while writing com.example.module1.class1: com\example\module1\classes\com\example\module1\class1.class (The system cannot find the path specified)public class class1 extends Thread {
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -deprecation for details.
1 error
OK
Note: Contents of my classes directory for module1:
classes/com/example/module1/class1.class
classes/com/example/module1/class2.class
classes/com/example/module1/class3.class
classes/com/example/module1/sub1/subclass1.class
classes/com/example/module1/sub1/subclass2.class
classes/com/example/module1/sub1/subclass3.class
=> all class files are correctly compiled
Compiling sources for module module2: E:\temp\_User_\project\packaging\workingdir\source\com/example/module2\class1.java:12: error while writing com.example.module2.class1: com\example\module2\classes\com\example\module2\class1.class (The system cannot find the path specified)public class class1 extends Thread {
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -deprecation for details.
1 error
OK
Application finished without errors.
Note: Contents of my classes directory for module2:
classes/com/example/module2/class1.class
classes/com/example/module2/class2.class
classes/com/example/module2/class3.class
classes/com/example/module2/sub1/subclass1.class
classes/com/example/module2/sub1/subclass2.class
classes/com/example/module2/sub1/subclass3.class
So, as you can see everything compiles as expected, but an error message is displayed related to each first file that is compiled.
==> Is this a known issue ?
==> What can I do about it ?
Suggestions welcome

How can I checkout an existing file from CVS without going through the wiz

How can I checkout an existing file from CVS, that is not already in my local jdev, without going through the wizard and checkingout everything?

You can't. AI doesn't produce .PLT files.

Jar file is not working after deleting all packages from the same directory

hello
i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
Please tell me what may be the reason???
thanks in advanced

hello
i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
Please tell me what may be the reason???
thanks in advanced

Unable to build project after checkout from CVS

When we import our java source files to the CVS module and later check the files out,
we cannot compile the files using JDeveloper. We get the following error from JDeveloper in the messages window: Internal compiler error.
We can, however, compile the source files using javac. Any ideas?
Environment:
Java IDE: Oracle 9i JDeveloper 9.0.2.829 running on Win2k, using Oracle OJVM
CVS Server: CVS 1.11.2 running on Red Hat 8 (rsh enabled)
CVS Client: JCVsII v.5.3.2 connecting using server mode

When checking the module (files) out from CVS do you get the same number and content as the before the import.

How to call a package from the Report in Oracle Application Express

How to call a package from the Report in Oracle Application Express

Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

How call procedure or package from Oracle BI Publisher 10.1.3.2.1

Hi Gurus,
I need to call a procedure or package from Oracle BI Publisher 10.1.3.2.1 by passing parameters, I do it because it would be easier to fill a table as the report that asks for is too complex (8 breaks, 5 dblinks, 20 tables, etc).
I'm not using the Oracle XML. Review include the following solutions:
Re: Stored procedures and dynamic columns
Re: Is it possible to use Stored Procedures in BI Publisher GUI?
Re: PL/SQL Stored Procedure w/ XML Template?
But none of them useful for me was the level of complexity.
Best regards.

Hi Vetsrini,
I write the sentence as it showed in the previous thread
select from whc_kk_v2.whc_p_kk_publisher (pv_msgerror =>: msgerror,*
pv_pro1 =>: prov_1,
pv_pro2 =>: prov_2)
run when I get the error BIP
ORA-00933: SQL command not properly ended
Show me I'm doing wrong, or who may be causing the error. I tried everything but does not leave, please your help.
Best regards

How to import a class not in the package from a package

how to import a class not in the package from a package?

http://java.sun.com/docs/books/tutorial/java/interpack/usepkgs.html

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Getting error code 1 when calling SSIS package from a stored procedure (SQL Server 2008 R2)

Hello,
I am trying to execute a SSIS package from SQL Server 2008 R2 stored procedure but getting error code 1 (as per my knowledge, error code description is as below:
0 The package executed successfully.
1 The package failed.
3 The package was canceled by the user.
4 The utility was unable to locate the requested package. The package could not be found.
5 The utility was unable to load the requested package. The package could not be loaded.
6 The utility encountered an internal error of syntactic or semantic errors in the command line.
Details:
I have a stored procedure named "Execute_SSIS_Package" (see below sp) which executes 'Import_EMS_Response' SSIS package (when I execute this package directly from SQL Server BID it works fine it means package itself is correct) and calling
it from SQL as:- EXEC Execute_SSIS_Package 'Import_EMS_Response'.
Here I receives error code 1.
Can anyone help me to resolve this issue please?
Thanks in advance!
CREATE PROCEDURE [dbo].[Execute_SSIS_Package]
@strPackage nvarchar(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @cmd VARCHAR(8000)
DECLARE @Result int
DECLARE @Environment VARCHAR(100)
SELECT @Environment = Waarde
FROM Sys_Settings
WHERE Optie = 'Omgeving'
--print @Environment
SET @strPackage = '"\W2250_NGSQLSERVER\BVT\' + @Environment + '\' + @strPackage + '"'
SET @cmd = 'dtexec /SQL ' + @strPackage + ' /SERVER "w2250\NGSQLSERVER" /Decrypt "BVT_SSIS" /CHECKPOINTING OFF /REPORTING E'
--print @cmd
EXECUTE @Result = master..xp_cmdshell @cmd, NO_OUTPUT
--print @Result
END

It has something to do with the security.
E.g. cmdshell is not enabled or the caller has not rights over the package.
There could be a syntax error, too.
I suggest you make the package runnable off a SQL Agent job then trigger the job from the stored proc with
sp_start_job <job name>
Arthur
MyBlog
Twitter

Error when execute a package from SQL Server Agent

We have the next problem:
When we execute a package from a Job of SQL Server agent, it shows the success messege, but reviewing the results, the package didnt do all the tasks.
When we run it mannually by MSIS the package, it shows the success message and it works fine.
The workflow of the package is :
1) Shrink the databases (executing a sql file)
2) Backup the databases (Back up Database task of MSIS)
3) Rename the files to .BAK extension (by the Foreach loop container and fyle system task)
4) Execute command to compress the it (by a .bat)
5) Move the compress file to another location (by another Foreach loop)
Manually run correct, but when is a a SQL AGent Job that execute the package it does only the first 2 steps.
we are ussing Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (coffee) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
We are using a user with administrator privilegies
Cheers

Can you check if account running package has proper access. You may need to define a proxy account for that.
See
http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
http://gqbi.wordpress.com/2014/01/30/setting-up-a-proxy-account-to-run-sql-server-integration-services-ssis-2012-packages/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Execute SSIS Package from JOB which contains Execute Process Task calling a .bat file

Hi All,
I have a EXCEL Macro needs to be called from SSIS. We could not use Script task because of some internal reason.
So we have taken an approach to call a .BAT file using Execute Process Task. This .BAT file will call a .VBS file which will execute the EXCEL Macro.
The SSIS Package is running good if I execute the package from BIDS.
But the real problem is with the scheduling this SSIS Package using SQL JOB.
If i execute this SSIS package from SQL Server Job, its executing the whole package successfully except the Execute Process Task.
So the overall issue is SQL Server Job is not executing properly if I call any .BAT file from the SSIS Package.
Please give me suggestion to get rid of the issue. Thanks in advance.

Hi Sai.N,
If you run the SQL Server Agent job manually from SSMS, does the package execute properly? If the package executes properly when you run the job manually, the issue should occur due to permission issue. In this case, I suggest that you create a SQL Server
Agent proxy based on the current Windows account which you use to log onto the operating system, and run the job under the proxy account.
If it is not the issue, please enable logging in the package as Visakh mentioned and post the warning/error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

Getting Error while Execute SSIS Package from Console Application

Dear All,
SSIS package working fine directly.
I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B.
One or more component failed validation.
There were errors during task validation.
Code :
public static string RunDTSPackage()
Package pkg;
Application app;
DTSExecResult pkgResults;
Variables vars;
app = new Application();
pkg = app.LoadPackage(@"D:\WORK\Package.dtsx", null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
I have recreate the application with again new connection in SSIS.
Still not working, Please provide solution if any one have.
DB : SQL Server 2008 R2
Thanks and regards,
Hardik Ramwani

The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
Are you sure that you are running the same package via .NET which works fine from Visual Studio?
By reading error message, I can say that you have copied OLEDB task from another package OR you have deleted one OLEDB connection manager. Now when package is run this task tries to use the connection manager and not found thus throws error message.
Open all OLEDB destination tasks and you find connection manager missing. Connection Manager name should be provided there
Cheers,
Vaibhav Chaudhari
MCSA - SQL Server 2012

Packages from CVS?

Similar Messages

Maybe you are looking for