Packaging, available items order

Hello,
In the Packaging window, the available items are re-ordered to be in numerical order.  Is there any way to change this setting so that the items appear on the packing slip in the same order as they are on the A/R Invoice?
Thank you

Hello,
I believe it is hard coded to the application.  We may not have option to change it even if by SDK.
Thanks,
Gordon

Similar Messages

  • Goods Receipt for packaging material - Item cat. ELP

    Hi expert,
    I am facing a problem regarding receive Packaging Material Item i MIGO via inbound. Problem detail as below hope you can advise me:
    1. I create PO order 1pc of Throttle
    2. In Inbound Delivery Screen I do Packing for Throttle by using Handling Unit Function, packaging Material is Carton Box.
    3. After Pack complete, Item for packaging material is auto generated in inbound screen:
    - Item Cat. of Throttle = ELN
    - Item Cat. of Carton Box (Packaging Material) = ELP
    4. When i do MIGO via Inbound: there is only 1 item for Throttle is displayed. How to do Goods Receipt for Carton Box item? Do i Miss any setting for that?
    Thanks.

    i thnk u sould maintain material master with two units one is throttle and second is cartoon.
    u shud maintain that how many throttle is equal to 1 cartoon.
    this u can maintain directlt in PO (In condition tab, with these two field : OUN and UN). in PO as a OUN ,give throttle n UN , give cartoon in item overview as well as condition tab.
    and during delivery change the unit in cartoon. then while migo, material will show in cartoon.
    hope it will be helpful.
    Thanks
    Nisha

  • Open Purchase Order Separation from item Order Qty

    Hi All,
    Kindly  suggest me how to separate open Purchase order from Item Order Qty.if i have 2 WH with different Order qty.in report it will be shown total order qty of both WH's.like
    Item            WH              Order Qty
    A                 01               100
    A                 02                 50
                      or
    A                 01                  0
    i need like this A--150   OR A--50(order qty).
    plz look into my query and suggest me how to do this.
    select distinct t3.CardName as SuplierName,t2.[ItemCode], t2.itemname,t2.[U_pperson]as PP,((SELECT sum(T4.[OnHand])FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = '01')
    +(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = 'EWH')) as Stock,t2.MinLevel as 'Min Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = '01')
    +(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = 'EWH'))-t2.MinLevel) as balance,
    sum(t1.openqty)
    as OrderQty,
    t2.MaxLevel as 'Max Bin',(((SELECT  sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = '01')
    +(SELECT sum( T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = 'EWH'))-t2.MaxLevel)as 'Balance II' from OPOR t0 inner join POR1 t1 on t0.DocEntry=t1.DocEntry inner join OITM t2 on t2.ItemCode=t1.ItemCode inner join ocrd t3 on t3.CardCode=t2.CardCode inner join OITW t4 on t4.ItemCode=t1.ItemCode and t4.WhsCode=t1.WhsCode   where t2.validFor='y' and  t2.[U_pperson]='p1' or t2.[U_pperson]='p2'  or t2.[U_pperson]='p3' group by t3.CardName,T4.[OnHand],t2.[ItemCode], t2.itemname,t2.[U_pperson],t2.MinLevel,t2.MaxLevel,t1.OpenQty
    Thanks&Regards,
    P.Pratap

    Hi,
    Try this:
    select distinct t3.CardName as SuplierName,t2.[ItemCode], t2.itemname,t2.[U_pperson]as PP,((SELECT sum(T4.[OnHand])FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = '01')
    +(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = 'EWH')) as Stock,t2.MinLevel as 'Min Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = '01')
    +(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = 'EWH'))-t2.MinLevel) as balance,
    sum(t1.openqty)
    as OrderQty,
    t2.MaxLevel as 'Max Bin',(((SELECT  sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = '01')
    +(SELECT sum( T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND  T4.[WhsCode] = 'EWH'))-t2.MaxLevel)as 'Balance II'
    from
    OPOR t0 inner join POR1 t1 on t0.DocEntry=t1.DocEntry inner join OITM t2 on t2.ItemCode=t1.ItemCode inner join ocrd t3 on t3.CardCode=t2.CardCode inner join OITW t4 on t4.ItemCode=t1.ItemCode and t4.WhsCode=t1.WhsCode   where t2.validFor='y' and  t2.[U_pperson]='p1' or t2.[U_pperson]='p2'  or t2.[U_pperson]='p3'
    group by t3.CardName,t2.[ItemCode], t2.itemname,t2.[U_pperson],t2.MinLevel,t2.MaxLevel
    Thanks & Regards,
    Nagarajan

  • Report on daily sale,stock availability,pending order,Ageing report

    Report on
    daily sale for time period
    stock availability
    pending order
    Ageing report

    Dear Goutam
    Through VF05, you can see sales daily.
    For stock MMBE
    For Pending Order, VA05
    Thanks
    G. Lakshmipathi

  • Display  Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price  against each line number

    hello all,
    i have an ALV report requirement like this,
    on the initial screen i have displayed(for a given agreement number like in ME33K )
    in the selection screen i have taken agreement number as EKPO-EBELN.
    purchase document number        item number        short text        target quantity      net price
    5400000019                                  1                      xxx                  1.000                  304300.00
                                                        2                     xxxx                 1.000                  500000.00
    the above fields i have taken from EKPO table.....
    and on double clicking the  item number i have displayed
    line number          service number       short text           quantity    units    gross price   quantity released
    1                           swr10                   xxxx                 2.00          kg          500             2
    2                           swr11                    xxxx                5.00          EA         500             2
    the above fields i have taken from ESLL (esll-extrow, esll-srvpos, esll-ktext1 , esll-menge  etc......)
    this i have done by passing EBELN to ESLH and getting PACKNO and passed this PACKNO to ESLL.
    now my question is i need to display  Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price
    against each line number above.....
    from which table do i need to take these fields.....
    please guide me....
    thankq....

    Thanks Andra,
    The problem is the multiple invoices is for non goods receipt item so there will be no delivery.At the time of creating a PO the GR is not checked so there will be no delivery .
    Also this setting is for invoices which are comming from Vendors.But if we are genrating the invoices manually it is not blocking those invoices.Also i there is nowhere mentioned in Incomming invoice to set tolerence for incomming invoice.Are you talking about Vendor tolerences?
    Thanks in advance
    Edited by: Metroid01 on May 14, 2009 6:52 PM

  • Error message:Material document contains no items (order: 40000004 item: 00

    Good Day SAP expert,
    I have facing an error message on Material document contains no items (order: 40000004 item: 000010) & Message no. /DBM/COMMON286.
    This error happen when I want to create Good Issue with action QGIS (Create Goods Issue (DBM)).
    Steps that I create vehicle order:
    1.     Go to /dbm/order01 and select 3010 u2013 Vehicle Order based on Model
    2.     Then I create for a new customer with model sales code
    3.     I save the vehicle order in DBM.
    4.     I go to VELO to create vehicle on Peugeot model sales code and create PO, good receipt and incoming invoice.
    5.     Then I use action QDBM to enable vehicle to DBM.
    6.     I assign the vehicle (DBM) to my vehicle order (created based on model).
    7.     The assignment is successful; therefore I would like to do Good Movement (good issue). Error : Material document contains no items pop up.
    8.     I have try with create VELO, assign QDM and create 3000 u2013 vehicle order, Good Movement able to perform.
    I apply snote 1527931 - Problem with reading of document flow on nonunicode systems.
    Its doesn't work, system say still say that material document contains no items.
    is it advisable change error message to warning message?
    Please advice.
    Thanks
    regards,
    ng chong chuan

    I am not sure but this coudl be reason.
    You have created a vehicle but you have not created the purchase order and Goods Recipt for the Vehicle, means the VEHICLE IS NOT IN YOUR INVENTORY
    First check whether the vehicle is in inventory or not, if not then not possible to do Goods issue.

  • Standard Package available for DMS in EP

    Hi,
    Is there any Standard package available for DMS in EP?
    If No, then what are the alternative possibilities to access DIRs from web apart from WEB DMS.
    Regards
    sham

    Im not sure but
    you can use iViews for accessing web dms just like cFolders or cProjects....
    Niranjan

  • A JRE or JDK must be available in order to run Eclipse

    Hello Colleagues ,
    I have started with the SAP HANA Basics course offered at OpenSAP .
    I am at my first steps for Installing Eclipse .
    Please refer to the following link :-
    http://hcp.sap.com/developers/learningtutorial111.html
    After Downloading Eclipse , i tried to ran the exe file .
    "I got an error A Java Runtime Environment(JRE)  or Java Development Kit(JDK)
    must be available in order to run Eclipse .No Java Virtual Machines were found after searching the following locations".
    Please let me know if I am missing something ?
    Regards
    Nitin

    Thanks for all the Replies to my original post
    When u start Afresh to Learn SAP HANA and installing the tools on 64 -bit windows  :-
    Step 1 : Install JDK or JRE .
    I found a link to share :
    http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
    Step 2 :
    Once you are done with installation, set the env variables. Right click My Computer> properties> Advanced settings->Envoirmental Variables
    Add two system variables:
    E.g. if you have installed JDK . Its rests in the following path
    JAVA_HOME: c:/program files/java/<jdkfoldername>
    CLASSPATH: %JAVA_HOME%/bin
    In My case
    Step 3 : Download and Unzip
    sapjvm-7.1.018-windows-x64.zip
    Step 4 : Download and Unzip neo-javaee6-wp-sdk-2.34.16.1.zip
    Inside your Folder DRIVE:\<Folderpath>\eclipse-jee-juno-SR2-win32-x86_64\eclipse
    eclipse.exe file would be there run it .
    Create workspace and start using .
    Cheers
    Nitin

  • Source of supply doesnu2019t work for SC items ordered as direct material.

    Hi there.
    We are working in SRM 5.0 with classic scenario.
    We are doing a SC with material code.
    We create a SC with two identical items. The only difference between items is: one item is order as direct material and the other one not.
    The problem is that for our item order as direct material, the system doesnu2019t propose any ECC contract or any ECC info record. But for our item not order as direct material, the system propose us ECC contract and ECC info record.
    So for SC items orders as direct material, the system never proposes any source of supply.
    However, in transaction BBPSOCO01 (Carry of sourcing) the systems propose source of supply OK for SC items with and without direct material.
    Any suggest?
    Thanks and regards.
    Raúl.

    Hi,
    The issue might be because when you choose, 'order as direct', the scenario changes from classic to extended classic, hence only local contracts are proposed in this case. Since you don't have anything local, you will not see any source of supply. Try using bbp_sos_badi instead and call all backend contracts using fm meta_sourcedeter_getsos_multi.
    Regards,
    Sanjeev

  • T-Code for No. of Item Ordered vs No. of Item Invoiced

    Is there any t-code where in the system can generate a report  that could get the no. of item ordered vs no. of item invoiced?
    thanks!

    Hi,
    Check the details in t.codes: MB5S and ME80FN
    Regards,
    Biju K

  • Change item order in Muse CC Quick info widget

    Hi,
    haven´t figured out yet how to change the items order from the Muse CC "Quick Info" widget.
    When I have f.i. 5 items how do I insert one at position 2. When I click f.i. the "+" at position 2 the new item will regardless be at position #6 (at the end of the line and not at third position)
    How can I change that?
    Thanks in advance.

    Thank you for your answer.
    Actually changing the triggers position was the first thing i tried and as long as the trigger is activated by click or mouseover/rollover this solution does work unfortunately it does not with autoplay option.
    With autoplay set it plays the "old" sequence no matter where I put the trigger so for instance if I have 5 triggers and set the 5th to position #2 it´s not shown as info #2 but still as #5 so #1,#2,#3,#4 are coming first still and then comes my trigger #5 that I actually dragged to position #2 before.

  • Is it possible to change "link" context menu items' order (I want "open in new window.." be the first) ?

    I made an upgrade FF from v3.6.xx to v17.0.x and found that "Link" context menu items' order is not the same.
    v3.6 menu looks as following: 1."Open Link in new Window", 2."Open Link in new Tab",
    v17.0 menu items' order is opposit 1."Open Link in new Tab",2."Open Link in new Window",
    All other items' position are uninteresting for me.
    How to swap this two upper items in "link" context menu?

    Both ways are useful:
    * Menu Editor [https://addons.mozilla.org/en-US/firefox/addon/menu-editor/ https://addons.mozilla.org/en-US/firefox/addon/menu-editor/]
    'Drag-n-drop' in editor window is working.
    * Editing "userChrome.css" [https://support.mozilla.org/en-US/questions/791244?page=2#answer-161497 https://support.mozilla.org/en-US/questions/791244?page=2#answer-161497] .
    For my Windows XP path looks: "C:\Documents and Settings\%account%\Application Data\Mozilla\Firefox\Profiles\%random_name%\chrome\userChrome.css".

  • Is there a standard package available for JAVA for MM in Enterprise Portal

    Hi
    I would like to know if there is a standard package available for JAVA in MM for Enterprise Portal as we want to create purchase requests in the portal and send them to SAP .

    Standman--
    If you want a somewhat more powerful tool (albeit more complicated) check out TOra:
    http://sourceforge.net/projects/tora/
    As an Oracle DBA I've used this at client's sites when I can't pay for PL/SQL Developer to be installed, and it has quite a few useful things built into it. I think that it's going to see a boom in popularity now that Oracle came out with XE.
    ~Jer

  • Host Compliance Report - Available Items Grayed out

    Trying to run a host compliance report against discovered assets.
    Under 'Available Items' --> "Operating Systems" --> "Solaris" --> "Solaris 10" I have a list if my discovered systems (I can see/manage them in 'Assets') but they are grayed out and I cannot select any of them to move to 'Target List" to run the report against.
    Let me know what additional information is needed to help offer a solution.
    Thanks in advance,
    John

    Hi,
    If you aren't confident in using Terminal check out this site for help with Launch Services.
    http://www.thexlab.com/faqs/resetlaunchservices.html
    Carolyn

  • I'm trying to buy CC Photoshop/Lightroom packages. In order to complete payment, I need to change the country from the default options (United States) to Brazil, But I'm not allowed to do it. I've already changed my origin country in my account informatio

    I'm trying to buy CC Photoshop/Lightroom packages. In order to complete payment, I need to change the country from the default options (United States) to Brazil, But I'm not allowed to do it. I've already changed my origin country in my account information.How do I change the country in order to complete payment?

    These are the two links I have
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    If the above doesn't help, you will have to contact Adobe (this is an open forum, not Adobe support)
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for