Packet or Ndis2 driver for Onboard Lan on K7N2 boards

I need a Packet or Ndis2 driver for Onboard Lan on K7N2 based boards, in order to run Norton Ghost disk image program across my network. Does anyone know where I can get such driver?

Similar Messages

LabVIEW 2010 FPGA Driver for Xilinx SPARTAN 3E Starter Board

Dear Friends,
Is there any possibility to release a LabVIEW 2010 FPGA Driver for Xilinx SPARTAN 3E Starter Board?
Regards,
wedo
Solved!
Go to Solution.

Hi Brad,
So glad to get your post here!
I’m looking forward to download the new installer.
I wonder whether the new driver will support the 10/100 Ethernet Physical Layer Interface, since the last drivers aren’t support this feature!?
Also, will be any new examples included with the new driver? For instance: an example for the StartaFlash Memory; I have done an example for this but I couldn’t get it work! I don’t know why! You may check my post and the example in the following link!
http://forums.ni.com/t5/LabVIEW/Spartan-3E-StrataFlash-Memory-wrong-reading/m-p/1030898
By the way, is there any plane to develop a driver for the Spartan-3E (1600Kgate) kit? Both kits (500KGate and 1600KGate) have the sample on-board peripherals, the only difference is in the number of Gates (FPGA chip). I think all that is needed is to add the component ID (29597843---->3E1600) and revise the xc3s1600e.bsd and 3sXXXe.nph.
Thanks in advance & kindest regards,
wedo

Solaris 8 driver for 3COM LAN card

I have installed Solaris 8 on a Pansonic CF-71 toughbook laptop, and need a driver for a 3COM 10 Mbps LAN pcmcia card model 3CCE589EC. Are there any out there!!

What happens when you type "ifconfig -a" (while logged in as root to your solaris installation)?
Linux driver won't work.

Need help finding a driver for our NI A/D board

My A/D board has the following numbers: 70243 and 84-01 and 3199F. Help me find the driver

All of the NI drivers can be located on the NI Drivers and Updates page. In order to find the required driver, you will need to know what the device is called. You can find this information in several different ways. One way is to visually inspect the device. If it is an NI device then it should list the device name somewhere on the board. Also, you could locate the part number. This number usually ends in -01 or -02 and is printed near a bar code. If you can find this number, then simply type it into the search on ni.com to locate the name of the device.
When the name of the device is figured out, you should then determine the appropriate driver for the device from the Drivers and Update page linked above.
If it is not an NI device, then you will want to view the device manufacturer's webpage for available drivers.
Please do not post back to this message as I do not believe the message pertains to the NI Measure software. The question is more related to a specific piece of hardware. Thus, you should repost this question, if another exists, to the appropriate NI Hardware category.
Best of luck.
Jared A

Nigpib-linux-0.6 GPIB software driver for Linux and PXI GPIB board

My I use nigpib-linux-0.6 GPIB software driver for Linux in a Compact PCI system running linux and equipped with your PXI GPIB board ?
Thanks.
Paolo Santinelli.
[email protected]

If you alter the device ID of the device from c801 to c821 within the driver module, you should be able to use the driver with the PXI board.

Installing driver for onboard NIC

I'm new to Solaris and have a question as to how to install drivers for my onboard NIC. I found drivers that might work but I don't know what to do with them. Do I use the tar command? Will it put it in the right directory that way or do I need to move it somewhere else first.
If the drivers work, can I then set it up for DHCP? I've read a little bit about it. Will this work: ifconfig <interfacename> auto-dhcp?

Before this gets completely out of hand, like a recent thread,
let's get a few things out of the way.
What hardware do you have? Brand? Model?
What precise Ethernet chipset do you have?
Integrated to the systemboard? Add-on card ?
If this is some sort of a PC, have you checked the
Solaris Hardware Compatibility List (HCL)
http://www.sun.com/bigadmin/hcl/data/sol/
and have you compared your hardware to what's on that list ?
Generally speaking, there is no such thing as "maybe" or "might work"
when you are speaking of driver software packages.
They would be correct or they would be wrong.
What driver software are you considering?
If you downloaded it, provide the link.
There should be a README file with the software, even if it's not named "readme".

NDIS2 driver for Ghost enterprise 8.2

Hi, I have recently bought 20 K8N Neo3-F mainboards with Marvell Gigabit Lan on-board for a cyber-cafe; I use Norton ghost 8.2 enterprise edition to make image backups and deploy instalations, but the nvidia NDIS2 drivers that come in the CD instalation dont work, when I use a boot floppy with ghost, it apears that "media test failed check cable" and then the message: "unable to bind", so I cant use ghost at all, unles i use another ethernet card, if there is anyone who could help me with this issue, ill be most gratefull, thank you very much.
Syscon:
K8N Neo3-F
Athlon 64 3000+
512Mb PC3200 RAM
Nvidia 6600LE PCIe based video card

Have found a answer in topic https://forum-en.msi.com/index.php?topic=93982.0
Sorry by the post

Looking for NDIS2 driver for PXI ethernet controller.

I need to find a DOS level network driver (NDIS2) for the PXI815xb Ethernet controller. This driver does not appear to be on the driver disk or hard drive of the PXI chassis.

The file is attached below. Just unzip it to a floppy disk. You will need to modify the settings for your particular network.
Trey Hamilton
Applications Engineer
National Instruments
http://www.ni.com/support
Attachments:
dosenet.zip ‏671 KB

Lookout driver for NI PCI Timer/Counter Board NI-6601

Is there any Lookout version 5.0 driver available for the NI-6601 PCI Card? Any built in drive that works?

There is a PCI card available that works with DAQ OPC, in this case the E-series product line would apply. Many of the PCI-6040E type cards have counters. However, at this stage of development I would recommend for serious consideration using LabVIEW and NI-DAQ. Lookout is a great program for communicating with OPC items. However, for basic to advanced data acquisition, LabVIEW is the optimized solution. All other ways will require more development time.
Regards,
Robert Jackson
Application Engineer

64 bit LabVIEW FPGA 2009 driver for Xilinx SPARTAN 3E Starter Board

dear i need this module
we i install the module that i hava this appear to me
LabVIEW Support for Spartan-3E (incompatible with 64-bit platform)
is thier a version to supprt 64 bit???
best regards
hi ?Q>
Solved!
Go to Solution.

bad news
i will use Virtual machine to solve the problem
bet regads
hi ?Q>

LabVIEW FPGA driver for Xilinx SPARTAN 3E Starter Board

i need drivers for spartan 3E .

If you are at a university that has a site license for the FPGA module, the following might be of interest to you:
Using LabVIEW FPGA with the Xilinx SPARTAN-3E XUP Starter Kit
See also this discussion.
Quote from the license agreement:
...INSTALLATION AND USE OF THE LABVIEW FPGA TARGET MODULE FOR THE XILINX SPARTAN-3E STARTER BOARD (THE “TARGET MODULE”) IS LIMITED TO ACADEMIC INSTITUTIONS THAT HAVE A VALID, CURRENT “ACADEMIC TEACHING LICENSE” FROM NATIONAL INSTRUMENTS FOR THE LABVIEW FPGA MODULE. THIS TARGET MODULE MAY ONLY BE USED FOR INSTRUCTIONAL PURPOSES, SUBJECT TO THE TERMS AND CONDITIONS OF THE NATIONAL INSTRUMENTS SOFTWARE LICENSE AGREEMENT THAT ACCOMPANIES THE SOFTWARE...
LabVIEW Champion . Do more with less code and in less time .

LAN driver for Satellite Pro L20 Windows 2000

I am looking for a LAN (ethernet) drive for my Satellite Pro L20, which has Windows 2000 on it.
I have found one for the WiFi, but not for the Ethernet (cable/CAT) connection.

Hi
Well, you cant find any LAN drivers for Win2000 on the Toshiba page because this unit was delivered and tested only with Windows Xp OS.
Nevertheless I found the information that this unit has a Realtek 8100CL LAN card.
In this case I assume to visit the Realtek website. There you will find a compatible driver for this LAN card.
http://www.realtek.com.tw/downloads/downloads1-3.aspx?keyword=8100
Bye

Satellite U940-d4m - LAN driver for Windows 7 needed

Hello! I install win 7x64 on my 940-d4m laptop ( psu6sr-01m010ru ), but i cant find driver for my lan adapter. On download page only windows 8 drivers and they didnt work. Where i can find this driver?
I wish you can help me with this problem, thanks.

ok i found this driver, thx for help.

Driver for Realtek 8111c

We are using ZfD7SP1 IR1 and have new workstations with a Realtek 8111C
onboard LAN adapter. When we want to image the workstations they are
booting with PXE fine, but the linux kernel did not find a driver for
the lan adapter. I have already downloaded the
ZDM7SP1_IR1_HP2a_IMG_Resource.zip patch and burned the bootcd.iso to a
cdrom, but the lan adapter was not found.
What can I do?
On the Realtek support page, there is a driver, but only the source
code. Is it possible to make a boot cd with this driver, or better a
PXE-kernel? Who difficult is it?
Thanks
Markus Pfeffer

Markus,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Cannot install LAN driver for my "KT6 Delta Series" motherboard

I've got this motherboard (KT6 Delta Series). Bought it second hand recently and I haven't got the original MSI driver CD. I downloaded all the drivers from the MSI website (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1) but I'm not able to install the driver for my onboard LAN.
I just get a yellow dot on the ethernet controller under unknown devices in my device manager. When I try to update driver from device manager by searching the folder where I unzipped the driver, I just get a message saying something like "no driver could be found for this device in the selected folder... will you connect to Windows Update to search for a driver...?". I've also tried to install it the hard way by selecting "from floppy disc" and browse for the "b44win.inf" file inside the "WinXP" folder in the unzipped driver folder... but I stilll get an error message... saying something like "can't find any information of the hardware in the selected folder"... it's a bit difficult for me to describe the messages correctley because not English Windows version.
I've downloaded both LAN drivers for this card from MSI download site (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1). Both "Broadcom 5788 LAN Drivers" and "Broadcom 4401 LAN Drivers" and non of them will install on my system. I've also tried downloading from the Broadcom website (http://www.broadcom.com/drivers/downloaddrivers.php). NON of them will install (
I've just formated my harddrive with fresh Windows XP install... The only software already installed is drivers for my motherboard and AGP card. No other software that can make any conflicts. When I connect a network cable to the onboard LAN the yellow light goes on so it seems the card itself is working.... but where can I get a driver that will install???
I've also tried connecting another network card (realtek 10/100) and connected my ADSL internett through it... and used the MSI Live Update utility... but still no luck... the only network driver it gets is the one for my reltek card :-(
Any suggestions???
I use Windows XP Professional SP2. How do I install the drivers for my onboard LAN???
Best regard.
Tor-Atle Kindsbekken

Quote from: osnavi on 05-November-05, 20:02:09
"...so my onboard Broadcom 4401/5788 controller thinks it is a 3COM controller instead of a broadcom controller..." Think it shouldn't be possible since basic data should be written in a kind of ROM. Now, if that could happen, it should be possible to reverse it the same way you did to overwrite that data.
I belive you are right... but I can't reverse it the same way I did when overwrite the data... because I'm not able to install the driver :( I cannot install the driver at all in Windows XP. In Windows ME it's possible to force the installation of the driver... but it does not work. It moves from unknown devices to network controllers... but it gets a yellow dot... and is not working. Every time I boot Windows ME I get a message reporting that something is wrong with the broadcom ethernet controller :(
I belive the only way I can reverse it is to replace my harddrive with another... with Windows XP and drivers for my card is already installed on the harddrive... the same way as I did when overwriting the rom file(s) with data from my Asus board... but I can't make such a harddrive when the drivers won't install on my card :(
I maybe think this also has happend to the onboard Audio controller... and maybe the chipsett also :( The audio controller works perfectley eith the MSI C-Media drivers... but when I run MSI live update... I get drivers for the C-Media device... but also drivers for "VIA AC97" audio controller can be downloaded from the MSI Live Update Utility... The "VIA AC97" is the audio controller on my Asus board... so I belive it has happened here also... and maybe also to the "VIA 4in1" chipset... but this is the same "VIA KT600" chipset as on my Asus board. When updating my Via 4in1 driver, I just get an option to update the inf file. But normaly on "Via 4in1" drivers on other boards I know, there shold be installed drivers for PCI, IDE and AGP. Is it the same way for you guys with this motherboard? Is it only the "Inf file" to update for you guys also?
What I think is most frustrating here is that things like this cab happen. This can happen to everybody. Many times I've switched harddrive from one computer to another... and I've never experienced anything like this before. This time I was not planing to boot the harddrive at all... just format it... but forgot to set the right boot order... so the harddrive booten... and that's all it takes to "destroy" my board. Shouldn't these ROM files be a littlebit more difficult to overwrite, you think? Why doesn't MSI writeprotect their ROM files or anything... to make them a littlebit more difficult to destroy...?
Well... I'm still interested in advices on how to "restore" my motherboard data to the original values... and remember... clear CMOS and update BIOS is not enough :(

Packet or Ndis2 driver for Onboard Lan on K7N2 boards

Similar Messages

Maybe you are looking for