Packing into suppliers packaging materials with external HU numbers

All,
We have a scenario where we have customer packaging materials that contain a customer barcode. We consider this as an external HU number. During picking through RF, we would like to pack during picking into this customer packaging material. Tcode LM45 seems to offer some kind of logic but will not allow entering any HU number which is not yet known in the system.
Any ideas on this?
thanks,
MZ

Can you tell me how you receive the handling units ?.If you are receiving material from PO then using an idoc then in idoc function module put the logic crete the inbound delivery with external HU number for receipt.
You can use HID dummy delivery type susyem should create the delivery with customer handling unit numbers for receipt.
I think you need to develop custom program which you need to insert HU number ,material qty ,plant and storage location then system will generate packing lable in background to receipt the material.

Similar Messages

  • RMDATIND uploading problem with external material numbers

    Hi,
    I'm using LSMW direct input program RMDATIND (Object:0020 Method:0000) for creating materials.
    I have a problem with uploading materials which have two types of external material numbers.
    For example one material number is 1111-333 and then we have 10000000. The problem is that direct input won't create materials with number 1111-333 though it's possible to create them manually. It works fine with material 10000000.
    Does anyone know how fix this issue?

    Sweth123 wrote:
    Hi Guys:
    >
    > Clicked check box External number assignment without Check., When I am creating a material (mm01) with only numeric characters it is giving me an eror message saying for this material type Numeric characters are not allowed.
    >
    > i should be able to create a material with external number range and it can be numeric or alpha numeric?
    >
    >
    > Thanks
    > Sweth
    Hi,
    go to the path Define Number Ranges for Each Material Type click on maintain groups & select the materila type & select the mouse on material type & click on maintain after that maintain the number ranges.
    for ex: from 300000000 to 399999999 internal no.range
                from A                to ZZZZZZ     external no.range
    from this u can able to create a material with external number range and it can be numeric or alpha numeric
    Regards
    Raj.

  • Materials with leading zeros - consequences of changes

    Hello,
    In Trx OMSL is defined that materials will be shown with leading zeros (checkbox marked).
    My client is already using logistics functions involving materials and wants to change this material representation with leading zeros to material without leading zeros (Lexicografic).
    the config setting appears quit easy but Im not sure what the effects will be - if there any!?
    Anyone has done this kind of change and what were the consecuences?
    Thanks for any answer.
    Aart

    Thanks Guys,
    Ill Try to focus my question.
    In OMSL my customer has not marked the checkbox: Lexicographic
    in OMSL my customer has marked the checkbox: Leading zeros
    my customer uses matererials with internal and external number asignment.
    Material with internal number asignment behave like this
    MM03: 000000000050000010  (and the material number is show like this in ME23N, MIRO etc.)
    MARA: 000000000050000010
    OMCV-CONVERSION_EXIT_MATN1_INPUT :  
    50000010  -> 000000000050000010
    MAterial with external number asignment behave like this
    MM03:    5101377600TF
    MARA:   5101377600TF
    OMCV-CONVERSION_EXIT_MATN1_INPUT :  
    5101377600TF  -> 5101377600TF
    The behaviour of the leading zeros is especialy a problem in trx like ME23N and MIRO.
    My question is:
    If I change in OMSL and unmark the checkbox "leading zeros" , what consecuences will this have for the materials with external number asignment - if there are any?
    Can I try this out in DEV and after this reset the flag "leading zeros"?
    Thanks for any answers.
    Aart

  • In Supplier View SNC Packaging Materials F4 help has no values

    Dear Friends,
    While creating ASN and subsequent HU: In Supplier View SNC Packaging Materials F4 help has no values. Although this material/ product exists in customer location.
    Thanks and Best Regards, Manoj

    Hi Manoj,
    Click below link this may help you
    http://help.sap.com/saphelp_snc70/helpdata/EN/46/7542dd6d8c69dfe10000000a11466f/frameset.htm
    In our system i am able get packaging material when i press F4 after maintaing data in packaging tab.
    When i create ASN then click on package button then click on Create HU and then go to Packaging material field and press F4 i am able to view packaging material data.
    I am sure you have assign this material location to model 000 but just check.
    Let me know if your issue is resolved.
    Thanks,
    Nikhil

  • Error when transfer 2 oil materials with different UoMs into 1

    Hi experts,
    I have an urgent & tough issue like this:
    Our customer have a process of transferring 2 materials with 2 different base-unit-of-measure into one single material. See the following example for better understanding.
    Material 1: Mazut measured in Kg
    Material 1: Diesel measured in L15
    Some time Mazut seem to have very bad quality and need to be qualified before selling out, so our customer merge Mazut and Diesel together to improve the quality of Mazut. But it seems to be impossible in SAP.
    I've asked SAP support but no luck, it's been designed that way.
    I want to know whether other Oil projects encountered this before and what was the solution? Otherwise can you tell me how do they manage these 2 kinds of materials?
    Thank you very much,
    Best regards,

    Hi,
    I just one to know: What is the based unit of Diesel (Mazut) in other oil&gas company in the would?
    If you have any information of based unit of Diesel that is difference with DiepDH case. Please let us know.
    Thank so much,
    Huyen

  • Packing into a HU which already exists with an IDOC

    Hi,
    I am using DELVRY03 with SHPCON idocs.
    I can pack into new HU's using E1EDL37/E1EDL44.
    But when I try to pack into a pre-existing, empty HU, it fails as it is trying to create the HU. Anybody do this?
    Thanks

    anyone?

  • Packing instructions - problem with external number range

    Hi Gurus:
    I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
    The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
    I appreciate your valuable input
    Tamas

    For further records:
    we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

  • Using Supplier Scheduling along with eCommerce; how does this fit into ASCP

    Hi,
    In Oracle 11i we are using Supplier Scheduling along with eCommerce to publish our MRP forecast via EDI 830/DELFOR. We use autoScheduling which requires MRP and in 11i we run MRP, so it all works well.
    Now we are moving to 12i and using ASCP (Advanced supply chain planning) and I understand that we do not need to run MRP any more. ASCP in conjunction with PS (Production Scheduling) will do the trick.
    Given this situation how can I use Supplier Scheduling / eCommerce to publish EDI 830/DELFOR?
    Appreciate any input in the right direction.
    Thanks!!!

    any body...some body...please help!!!

  • External HU Numbers for Packaging - Numerics have issues

    Hi,
    We pack our raw materials into packing materials as per customer requirement .
    We have created the packaging material and had it assigned to use -- "Any external number can be entered (no HU functionality)"
    The total needed is 20 digits,.
    Issue:
    if we enter the HU id as --> 0001234556 --> Sap takes it as 123456 by truncating zeros.
    if we have atleast one alphabet in the ID entered then it works fine.SAP doesnt truncate the id.
    Is there a possible solution to acheive this !!!
    We want SAP to keeep all the numerics as entered, it should not truncate any digits eventhough its numeric !!!
    Thanks,
    Srikanth.

    Can you tell me how you receive the handling units ?.If you are receiving material from PO then using an idoc then in idoc function module put the logic crete the inbound delivery with external HU number for receipt.
    You can use HID dummy delivery type susyem should create the delivery with customer handling unit numbers for receipt.
    I think you need to develop custom program which you need to insert HU number ,material qty ,plant and storage location then system will generate packing lable in background to receipt the material.

  • Hu_packing_and_unpacking of auxiliary packaging materials

    Hello Gurus!
    I am trying to add auxiliary packaging materials to HU with HU_PACKING_AND_UNPACKING and this one works fine (I can see material and quantity added to VL32N->Pack screen, and relevant entry in table VEPO is created). The problem is, that when I do it with VL32N and I provide the transaction with PSTYV (Item Category), WERKS (Plant) and LGORT (Stor. Location) a new position in delivery is created and POSNR_GEN is filled with its value.
    I am unable to do the same with HU_PACKING_AND_UNPACKING. I provide FM with is_packing_request-werks, -lgort and -pstyv but the delivery positions are not automatically generated and assigned. Only LGORT gets filled with supplied data ... other fields (WERKS, PSTYV) not and of course POSNR_GEN stays empty
    Any ideas how to make it work from FM as it works from T-Code?
    Regards,
    FS

    I have tried HU_PACKING_REFRESH ... but it is not working as supposed

  • Creation of Server Proxy for  Message interface with External Defination

    Dear All,
    I am getting a problem while generating a server proxy for the inbound interface . The request message used in the inbound interface is a external definition which is uploaded using a XSD file. The XSD file was supplied by a third party which is having very high complex strucuture and used lot of abstract data types in the design. When i tried to generate the proxy in the R/3 system (Transaction SPROXY) for the inbound interface i am getting following error.
    Interface uses external and internal message definitions
    Message no. SPRX122 *
    Diagnosis
    In a message interface you can use messages from different sources:
    Message types and fault message types edited in the Enterprise Services Repository
    Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
    In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
    System Response
    The interface cannot be generated.
    Procedure
    Change the interface definition accordingly in the Enterprise Services Repository.
    Please guide me, how to generate the proxy for the interface with external defination message. I could nt geneate manullay, because it is having very high complexity and its a big structure.
    Is there is any way to generate the proxy for interface with external definition
    Regards
    Vijayanand

    Hi,
    i.       Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
    ii.       Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
    Check this, it may help you
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
    REgards
    Seshagiri

  • Generate delivery items for packaging materials but aggregate in one line

    Hy, we have a requirement for delivery process, we have WM and we make picking by RF, and automatic generate items for packaging materials, but one line per pallet and the deliveries have a lot of line items that we want to aggregate in only one line item, instead of having for e.g. 30 lines with one pallet we need to have one line item with quantity 30.
    can you help us,
    Thanks in advance.
    jonh

    Hi,
    You can very well achieve this by usinh a spilt routine in your copy control from sales document to delivery document.
    Goto tcode: VOFM - Data transfer - deliveries.
    For this you need to write a routine with the help of  your ABAPer & to include logic something like this:
    You have to identify some unique feild in the two material or even the material code itself.
    Then in the routine logic, you pass this feilds in the combination criterai field in delivery that is "ZUKRL"
    Then in copy control sales doc to delivery: you attach this routine in header details in data transfer "Header Data"
    See the code below for your help:
    SELECT SINGLE PRAT1 PRAT2 PRAT3 PRAT4 PRAT5 INTO (MVKE-PRAT1,MVKE-PRAT2,MVKE-PRAT3,MVKE-PRAT4,MVKE-PRAT5) FROM MVKE
                      WHERE MATNR = CVBAP-MATNR
                      AND   VKORG = CVBAK-VKORG
                      AND   VTWEG = CVBAK-VTWEG.
    IF NOT MVKE-PRAT1 IS INITIAL.
    ZUK1-C+0(1) = 'O'.  "FOR OIL
    *LIKP-ZUKRL = ZUK1.
    ENDIF.
    IF NOT MVKE-PRAT2 IS INITIAL.
    ZUK1-C+0(1) = '1'.  " FOR FRAGILE 1
    *LIKP-ZUKRL = ZUK1.
    ENDIF.
    IF NOT MVKE-PRAT3 IS INITIAL.
    ZUK1-C+0(1) = 'N'.  " FOR NON FRAGILE
    LIKP-ZUKRL = ZUK1.
    ENDIF.
    IF NOT MVKE-PRAT4 IS INITIAL.
    ZUK1-C+0(1) = '2'.  " FOR FRAGILE 2
    LIKP-ZUKRL = ZUK1.
    ENDIF.
    IF NOT MVKE-PRAT5 IS INITIAL.
    ZUK1-C+0(1) = 'B'.  " FOR BULK / OVERWEIGHT
    LIKP-ZUKRL = ZUK1.
    ENDIF.
       LIKP-ZUKRL = ZUK1.
    CONDENSE LIKP-ZUKRL NO-GAPS.
    endif.
    Hope this helps you
    Regards,
    Dhananjay

  • Handling Unit packing into shipment

    Hi experts,
    At our client, we are developing a new packing function similar to HUPAST, but which is capable of packing at the shipment level.
    Our requirement is that, packing will be done directly at the shipment level. Products are NOT packed into deliveries first. For this, we made packing not mandatory in the configuration which allows us to pack directly at the shipment without packing at the delivery. We tried using VT02N and pack the materials of different deliveries into different HUs. But this VT02N screen is not user-friendly (scanner friendly) and we want to develop something similar to HUPAST, but at the shipment level.
    Is there a FM which will create HU and associate it with the shipment? BAPI_HU_CREATE will create HU, but can we link that to shipment using BAPI_HU_CHANGE_HEADER or is there any FM for this
    Please help me
    Thanks
    Challa

    Hi,
    I hope you can use below FM's for packing.
    BAPI_HU_CREATE
    HU_PACKING_AND_UNPACKING
    HU_GET_HUS
    HU_POST
    WS_DELIVERY_UPDATE
    Hope this helps you....
    Rgds,
    Kris.

  • Subcontracting of Packaging Materials

    Hi Gurus.
    1) What are the essential and characteristic views and fields of packaging material in Material Master?
    2) If Subcontracting of Packaging Materials is involved, then is handling unit invloved? if yes, can you please explain in details how is handling unit involved in this case?
    3)Is GR an internal or external document? I mean when truck comes with the goods, what document does truck driver bring with him?
    Itls urgent!! Please help
    Thanks,
    Kumar

    Hi,
         The GR is an internal document....Whenever the truck driver comes....he has the paper described details about invoice price for the given delivery of the material...which is provided to you for checking....pls do insert these details only if you have full faith on the vendor ie. abt delievered qty...price charged etc....
    Your answer to first question is :
    VERP (packaging materials)
    Packaging materials are used to transport goods and come with the goods free of charge. A material master record of this material type is managed both on a quantity basis and by value.
    Hope it helps....
    Regards,
    Priyanka.P
    Further answers will be updated....
    AWARD IF HELPFULL

  • ESS/MSS business packages "Deployed with Warning"

    Hello All,
       We are on NW04s SP10 on MS SQL server and Windows server. The Database and portal installations or on different machines. I installed the business packages ESS 1.0, MSS 1.0 and the XSS components - 600 using the JSPM.
    After I deploy, I get the message<b> "Deployed with Warning"</b>
    When I opened the log files and checked for errors, I found errors in deployment on these SDAs
    sap.com/essfiaddr  - WEBDYNPRO
    sap.com/essinaddr  - WEBDYNPRO
    sap.com/essinpdata  - WEBDYNPRO
    sap.com/mssexpdyn  - WEBDYNPRO
    sap.com/mssexpssa  - WEBDYNPRO
    sap.com/mssoprogeneraldescription  - WEBDYNPRO
    And I get the following exceptions for all the SDAs above.
    <b>07/01/11 09:54:10 -    sap.com/essfiaddr  - WEBDYNPRO
    07/01/11 09:54:10 -  ***********************************************************
    Jan 11, 2007 9:54:11 AM  Info: End of log messages of the target system.
    Jan 11, 2007 9:54:11 AM  Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Jan 11, 2007 9:54:11 AM  Warning: Finished with warnings: development component 'ess/fi/addr'/'sap.com'/'MAIN_ERP05PAT_C'/'795293':
    Caught exception during application startup from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Error occurred while starting application sap.com/ess/fi/addr and wait.
    Reason: Clusterwide exception: server ID 11376250:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''sap.com/essfiaddr'' for startup. Reason=
    Clusterwide exception: Failed to start application ''sap.com/essfiaddr'': The referenced application ''sap.com/ess~per'' can''t be started. Check the causing exception for details. Hint: Is the referenced application deployed correctly on the server?
         at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:317)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:227)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4684)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4589)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4562)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)</b>
    Now, after this, when I log into the portal and see the MSS role, the links are all missing. I see only Overview and its worksets and pages and Reports and its worksets. Everything else is missing. The warning that I see is<b> "Linked object is unavailable"</b>
    Could anyone please suggest me what could be wrong?
    Thanks,
    Sunitha<b></b>

    Hi Sunitha,
    First of all I was not able to find if your backend is ERP 2004 or ERP 2005. It should be ERP 2005 if you want to user ESS 1.0 and MSS 1.0 BP
    Please check in Content Administrator if you can locate these applications and test the same. If yes then you can ignore this warning. If No, in that case you have to redeploy XSS, ESS and MSS using SDM again.
    The links in portal comes from your backend Area Page Customizing. To verify if the problem is with your Portal Business Package or with your backend customizing run your ESS applications using
    http://<portal>:<port>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenuArea?sap.xss.menuhdr=SAPDEFAULT&sap.xss.menuargrp=SAPDEFAULTESS
    and MSS using
    http://<portal>:<port>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenuArea?sap.xss.menuhdr=SAPDEFAULT&sap.xss.menuargrp=SAPDEFAULTMSS
    If you can see all the links correctly here, your backend customization is fine and there is a problem with your BP of ESS and MSS. So you will have to import the same again in the portal. However if you are not able to view the links in the page, then there is a problem with you Area Page Customization. You will need to check your config with the Client 000 configuration to find out the missing config.
    Hope this helps.
    Regards,
    Shubham

Maybe you are looking for