Pacman/wget through ftp proxy with user@site auth(tis fwtk?)

hi
i'm trying to upgrade arch at work.
in debian i had to configure apt like this:
ftp
Proxy "ftp://<user>:<pass>@proxy_ip";
/* Required script to perform proxy login. This example should work
for tisfwtk */
ProxyLogin
"user $(PROXY_USER)";
"pass $(PROXY_PASS)";
"user $(SITE_USER)@$(SITE)";
"pass $(SITE_PASS)";
Timeout "120";
/* Passive mode control, proxy, non-proxy and per-host. Pasv mode
is prefered if possible */
Passive "false";
i exported http_proxy and ftp_proxy env. vars.
and told pacman to use wget (the default XferCommand in pacman.conf)
of course pacman/wget can't get anything through the proxy because of the missing user@site auth.
any chance i can get something similar to work with pacman/wget?
TIA

sry, i forgot to mention. normal http proxy-ing is working. but there is some kind of pop-up virus scanner implemented, i only get the pop-up HTML code when i try to use it with wget.
the ftp proxy is more like a a gateway i guess.

Similar Messages

Secure Proxy with user name and password.

I'm trying to develop a tool that can go out to the internet through a secure proxy with username and password, and download a file from a secured site, (https). Anyone have any experince with this, I've looked at a few things but nothing has really been helpful.

Do you have an http proxy that requires authentication? If so, what type of authentication? Basic? Digest? NTLM if your proxy is on IIS?

Jpublisher - Consuming a Web service through a proxy with authentifiaction

Hello,
I use the command jpub to create packages in my DB for access the Web service. The Web service is accessible only behind a proxy server with authentication. I can not find options to specify the parameters jpub authentication proxy server.
Command example :
pub -u scott/tiger -sysuser sys/welcome1 -proxywsdl=http://webservices...?WSDL -endpoint=http://webservices.. -httpproxy=myproxy.com:80
In this case, jpub unable to generate packages since it can not pass the proxy server.
thank you for your help

chrispi wrote:
I use the command jpub to create packages in my DB for access the Web service. The Web service is accessible only behind a proxy server with authentication. I can not find options to specify the parameters jpub authentication proxy server.I do not see JPub in the topic that describes the subject matter of this forum. It says SQL and PL/SQL. Not JPub (whatever that may be)... And no - why should I use JPub to "generate" database packages when I have a keyboard, a brain, programming language manuals, and am perfectly capable of designing and writing code...?
Command example :
pub -u scott/tiger -sysuser sys/welcome1 -proxywsdl=http://webservices...?WSDL -endpoint=http://webservices.. -httpproxy=myproxy.com:80
Standard http proxy syntax (supported by Linux o/s and others) is as follows:
+http://[username:password@]proxy[:port]+
E.g. (setting Linux shell environment variable for proxy access)
export http_proxy=http://scott:[email protected]:80

Applet does not load using java 1.5 through reverse proxy with certific...

Hi,
we have the following problem:
When using java 1.5 in our browser, our applet does not load. Using java 1.4.2 it works. It also works using java 1.5.0 using another reverse proxy.
The differences between the 2 reverse proxies (one works, one works not) we use is that the one through which the applet does not load has a certificate installed that is not for its hostname. Can this be the reason the applet does not load? Where can I find information about the sandbox of java 1.5.0 concerning these issues. Are there any docs of the security restrictions imposed by java 1.5.0 sandbox?
Greetings,
Tim

Ok,
the solution to this specific problem was a misconfigured reverse dns lookup.
Greets,
Tim

How to use the option "Use FTP Proxy" within file adapter for FTP-Proxy

Hello there,
I'm currently dealing with a problem regarding PI 7.40 file adapter and our proxy server. We have installed our pi system within our LAN behind two DMZ's. So we need to use the ftp-proxy function. But when I try to send a file useing this communication channel I'll geht the following error:
If have asked my system colleagues and they told me to use the ftp-proxy string as used in filezilla:
Is there anyway to use this type of ftp-proxy string within the pi configuration:

Hi Harrish,
I have already found this note but I also found the note
1803398 - File Adapter - FTP Proxy type USER@HOST:PORT support
But as I alread tried the solution I think it's not working
regards
Christian

SSH through http proxy

Hi,
Currently I have to pass all traffic through a http proxy that only lets ports 25, 80 and 443 through.
I'd like to ssh to a machine in our office outside of the above network and using Putty on Windows I can set the proxy details with username and password and it works fine as I have set my listing machine to use port 443.
How can I achieve the same access through the proxy with ssh on Mac? I have tested that ssh with port 443 works when not using the proxy so it seems the proxy is the issue.

You could use Corkscrew
<http://wiki.kartbuilding.net/index.php/Corkscrew-_ssh_overhttps>
You might also look into Hamachi (VPN)
<http://www.macupdate.com/app/mac/36286/logmein-hamachi>
Message was edited by: BobHarris

Since installation of last 4.0b12 version, I'm unable to connect to any https site through a proxy. Connection works if no proxy is involved, with proxy I receive a message like "proxy refuses the connection". Thank you for your answer

I'm connected to a customer's network and I have to use a proxy.
I correctly authenticate myself to the proxy and I try to access https://mail.google.com.
I receive a message that the proxy refuses the connection.
I noticed that this happens with all the https sites.
If I connect with my mobile internet key without proxy, I'm able to connect: the combination of proxy and https is failing.
Other computers on the same network with different browsers can connect to https through the proxy.

I'm working with the Firefox development team on this one. As far as I can tell, they seem to think that there are 2-3 different problems with the same/very similar symptoms, all involving proxies. They think they've fixed them all for RC1.
Right now, it looks like we just want people to test an early build.
You can get that here:
[http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/2011-03-03-12-mozilla-central/firefox-4.0b13pre.en-US.win32.installer.exe]
Install that somewhere (not in your current install directory), quit all open Firefox instances and try it. Let me know if it works.

Can I Use Dreamwever Site manager with Edge Code? Or at least have the ability to upload through FTP

Hi There
I develop all day in Dreameaver CC.
I Use DW Site manager to upload files to the site.
Unfortunately - DW code view is really laggy recently and it's really hard to work with.
I wonder whether I can use Edge code on a live site so I can upload my files to an online site like I do with DW site manager.
Thanks A LOT
Guy Lev
Adobe ACE, ACI
IDUG chapter representative
Israel

There's no integration between the 2 programs, but you should be able to use them at the same time. Be careful to:
1. Save all of your files in EC before jumping to DW to use FTP
2. Don't edit any files in a EC that are being FTPed by DW
Randy

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

What version of Muse are you using? If it's not 2014.2, please go to the Creative Cloud Desktop App or creative.adobe.com and update.
The FTP login failure is most likely due to your host not supporting FTP Extended Passive Mode. In Muse 2014.2 switch to "Passive (PASV)" in the Connect to FTP Server dialog.
Regarding performance, how large is your site (in pages and megabytes)? How many Design view tabs are open? What specific operations are slow?
If you'd like to send your .muse file, I'll take a look and attempt to isolate the cause of slow performance. Please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. Thanks.

How to read a ftp file with a specified file name in Proxy-XI-File scenario

Dear all,
I have the following requirement:
The end user send a request via the proxy to XI, within the request parameters there is a file name, and the XI need to retrieve the file content from a ftp server with this specified file name, how can I achieve this?
According to my understanding, the file receiver adapter can only write the files to the server.
Thanks and regards,
Bean

Dear Bean,
This can be achieved using a BPM...
you will have to use Two parallel receive steps within a fork...
1. 1st receive step :This will bring the data from the proxy
2. 2nd receive step :according to pipeline step before this step would be executed interface determination would be called withini that you can put a mapping wherin the source and target message type would be as follows
a. source message type ; the file structure that is going to be picked from ftp structure
b.target message type : same structure as source except at top you will add "filename" field
(you cna find on forum how we can get a fielname in the mapping ..in case you dont knw )
3. now you can define correlation on the field "fielname" in both the receive steps provide the hirearchy and structure of data coming from both file and procy are same...
4.. after corelation you can put any steps like transformation ( as you want)
Hope this helps

ASA cut through proxy with RADIUS challenge response?

Have this working for IPSEC VPN on same box (tested on 8.2.1 and 8.2.3)
Want to do cut through proxy with challenge response - same ASA and same RADUIS server but using aaa authentication match command and this is what happens...
It looks like the ASA sends a completely different radius authentication request than with VPN authentication request. Is there any way to specify what request is sent?
What the RADIUS Server sees with ASA VPN auth - THIS WORKS OK (included for comparison)
Date: 15/11/2010
Time: 3:53:57 PM
Type: Information
Source: Server
Category: RADIUS
Code: I-006001
Description: A RADIUS Access-Request has been received.
AMID: 0xC8500B80B3D8F49C6CB37E5D32DA6682
Details:
Source Location : 10.xx.21.24
Client Location : 10.xx.21.230:1025
Request ID : 31
Password Protocol : PAP
Input Details : RADIUS Code:1, RADIUS Id:31, , User-Name:xxxx, User-Password:******, NAS-IP-Address:10.xx.21.230, NAS-Port:31, NAS-Port-Type:Virtual, vendor(9):attrib(1):0x1A2000000009011A69703A736F757263652D69703D31302E32312E352E313137, Calling-Station-Id:ip:source-ip=10.21.5.117
Action : Process
What the RADIUS Server sees with ASA cut thru - THIS FAILS (any help V welcome)
Date: 17/11/2010
Time: 2:29:31 PM
Type: Warning
Source: Server
Category: RADIUS
Code: W-006001
Description: An invalid RADIUS packet has been received.
AMID: 0xC19D988F83365F20151C3F6339DEC74B
Details:
Source Location : 10.xx.21.24:1812 (Authentication)
Client Location : 10.xx.21.230:1025
Reason : The sub-protocol of the received RADIUS packet cannot be determined
Request ID : 33
Input Details : 0x01210066055A8B6881266714BDB20380B9FE5FAC01066962333504060AC815E60506000000203D06000000051A2000000009011A69703A736F757263652D69703D31302E34302E352E3131311F1A69703A736F757263652D69703D31302E34302E352E313131
Request Type : Access-Request
Thanks in advance
IB

Hi Ian,
sorry for the late reaction - do you still need help with this?
The difference between the working (VPN) auth and the failing (CTP) auth seems to be that VPN is using PAP (so no challenge-response!) while the CTP is using MS-Chapv2
So my guess is that your Radius server does not support MS-Chapv2. If that is the case then you may want to try this:
aaa-server () host
no mschapv2-capable
Although this command is not really meant to be used in this scenario, so I'm not sure if it will work but I'm hoping it will make the ASA revert to PAP for all auth requests to this host.
Note that you won't be doing challenge/response, so your passwords will be transmitted over the wire (encrypted).
hth
Herbert

Sending files via File Adapter through FTP having a HTTP proxy as firewall

Dear experts,
I am having a issue trying to send a file via FTP with the File Adapter. My client has a HTTP proxy with authentification required as firewall in order to send files via FTP.
I've tried several solutions but I cannot find a way to add the proxy name, user and password in the communication channel.
Any ideas?
Thanks in advance.
Best Regards

Hi,
Unfortunately those changes didn't work. The adapter is not able to establish a connection within the FTP server. These are the parameters I added:
-Dhttp.proxy.user=<usename>
-Dhttp.proxy.password=<userpassword>
-Dhttp.proxyHost=<proxy.domain...>
-Dhttp.proxyPort=80
-Dhttp.nonProxyHost="*domain1.com domain2com"
-Dhttps.proxy.user=<usename>
-Dhttps.proxy.password=<userpassword>
-Dhttps.proxyHost=<proxy.domain...>
-Dhttps.proxyPort=80
-Dhttps.nonProxyHost="*domain1.com domain2com"
And just in case, we tried with these other parameters at the same time.
-Dftp.proxy.user=<usename>
-Dftp.proxy.password=<userpassword>
-Dftp.proxyHost=<proxy.domain...>
-Ddftp.proxyPort=80
-Dftp.nonProxyHost="*domain1.com domain2com"
The errors in the adapter engine's log are:
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Socket connection timed out: <ftp ip address>
Error Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Socket connection timed out: <ftp ip address>
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Socket connection timed out: <ftp ip address>
By the way, we are using PI 7.0.
Thanks in advance
Edited by: SAPIMSA . on Apr 20, 2011 4:08 PM

Site not working through Transparent Proxy

I have a site that will not load through transparent proxy at one of my buildings.
I have 2 buildings with same BM setup (3.9SP2 on NW6.5 SP7). At one location, I can not resolve a web site when running through transparent proxy.
At the other location, it works just fine.
Also, if I set the proxy to either BM server, the site loads without incident.
As another note, both locations use the same internal DNS server which is located in the building where transparent proxy works for this site.
What am I missing?
Any ideas as to what to try next is greatly appreciated.

On 03/16/2010 03:26 PM, sjdimare wrote:
>
> Thanks for the reply. Both BM servers are using the same proxy.cfg file
> - Craig Johnson's - revision 30.
>
> I ran a lan trace on 2 separate PCs from the different networks.
>
> On the working network, you can see the DNS lookup in the wireshark
> log.
>
> In the network where it is not working, there is no DNS entry even
> showing that it is trying to resolve the domain name. Other sites are
> working just fine and you can see the DNS entry going to our internal
> DNS server.
>
> In the non-working segment, if I hard set the proxy, you see an HTTP
> entry going to the proxy server and resolving the domain in question.
>
> Very strange.
>
> Any new ideas are greatly appreciated.
>
> Steve D.
>
>
Then the pc failing has problem to resolve the entry. When you force the
browser, pc does not resolve anything, just send the url to bm and bm
resolve it. With TP, it is the PC who makes it. It could be that this pc
has already cached this site. But then you should see the reqesut goign
to the bm server. Without seeing the traces ( i do not understand your
there is no DNS entry even
showing that it is trying to resolve the domain name,) i can not comment
in more detail other that you've got a PC or network problem or dns
problem with this particular site, but not a bm.
if trace shows dns query from the pc and no answer, but is really
strange, do the same step but this time take a lan trace on the dns
server to confirm that request is received and what it does with it.

Issues with cross-site CAS redirect of OWA users

Hi,
I am having an issue with our CAS servers, possibly since upgrading to SP3 (I am not 100% if the upgrade caused it). We are currently on Exchange 2010 SP3 RU4.
I have tested logging into OWA on each CAS server with a mailbox from the same site as the CAS, and it works fine.
But if I am using a mailbox from the opposing site, I get this scenario:
1. User reaches site 1 CAS server
2. User logs into site 1 CAS server with a site 2 mailbox
3. Site 1 CAS server redirects the user to another form authentication on a site 2 CAS with this URL:
https://Site2CAS.domain.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fSite2CAS.domain.com%2fowa%2fping.owa
4. User again fills out the form to log in
5. User gets a blank page with this URL:
https://Site2CAS.domain.com/owa/ping.owa
The workaround is that the user then can get their inbox page to load by deleting out the "ping.owa" from the URL. But obviously this is not the intended user experience.
The redirect would apparently work fine if it wasn't for the addition of this "ping.owa" to the URL. Although I would prefer the user only have to fill the forms authentication out once, the main problem is the blank page.
Thanks

Rule of the GAME
For scenario:
CAS Array in Internet Facing AD Site and CAS Array in non Internet facing AD site
It will be CAS Proxy and NOT Redirection
TO force exchange to use Redirection only, set external URL in non Internet facing site CAS as $Null
Internet Facing Site
Internal URL= CAS NLB internal FQDN for that site CAS Array
External URL= CAS NLB Alias published in external DNS
Authentication= Form Based with Basic Auth
Non Internet Facing Site
Internal URL= CAS NLB internal FQDN for that site CAS array
External URL= Null
Authentication= NON Form Based (Integrated Windows Auth)
Thats All
Understanding Proxying and Redirection
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Thanks,
Soumen
Soumen Ghosh

Working with remote site via FTP - getting html only

I''m using DW to remotely work with the website via FTP. Is
it possible to make it NOT download all the assosiated files with
the html, that I'm edtiting? I switched on the prompts in getting
and putting stuff, but it still tries to download or upload
additional stuff. I need it to deal only with html.
Thanks for any clues.

> It works good, it is just disturbing, that it is trying
to upload
> everything
> besides pages.
Works good? Make one silly mistake and you are toast.
Use a version control system instead. DW has a primitive one
in
Checkin/Checkout, but it may be all you need.
I would NEVER do what you are doing in a multi-user
environment....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"simterra" <[email protected]> wrote in
message
news:fpki1l$2ci$[email protected]..
> hmm, because several people work with my site on the
same documents, it
> generates a mess if they deal with editing local pages
and uploading them
> to
> the server. Working directly with pages from the server
solve this
> problem -
> they're always getting the last version (given that time
they work with
> them is
> largely different).
>
> It works good, it is just disturbing, that it is trying
to upload
> everything
> besides pages.
>

Pacman/wget through ftp proxy with user@site auth(tis fwtk?)

Similar Messages

Maybe you are looking for