Page break doesn't work in my BI Publisher template

Hi!
I have been to build a RTF template in Word.
My BI Publisher version is 10.1.3.4.
In my template I have three conditional groups (for-each-group) and I would like to do a page break in each of them.
My template is something like this:
group ROW by MONTH
group by WEEK
group by HOURpage break
*Month: MONTH*
*Week: Week*
*Hour: Hour*
group by GROUP
F
Eend by GROUP
page breakend by HOUR
page breakend by WEEK
end ROW by MONTH
If I put the "page break" before of the "end ROW by MONTH" it doesn't the page break.
My template does the "page break" between different months and weeks, but it doesn't work between different hours.
Can someone help me?
Thanks in advance.
Edited by: SFONS on 31-Oct-2011 04:56

Pages has never been able to split rows across a page boundary & as far as I can tell that has not changed in the new version. You will need to manually split the row into two rows to fit.

Similar Messages

Page break doesn't work for the detail group

I have this report created for Quotations which spreads in 3 logic panels.The report comprises 1 parent group and 6 child groups.Now I want the last child group to appear in a seperate page under the heading 'Annexure'.For this, I set the 'Page break after' for the repeating frame of another group positioned just above this detail group in question. But in the new page not only does the child group get printed but also the master group members and some boiler plate objects i created there.How can i get rid of this problem?
Thanks
Jay

Jay,
Seems something wrong in your reports layout which is a bit harder to underdtand from your description. You can post with a graphical representation of your reports layout model.
BTW, why don' you try the page you want as annexure in trailer section?
Thanks
The Oracle Reports Team

Help - Page break won't work

Report in production and my page break isn't working. OM report and should break at every new order. Can anyone review my template?
I took version where it worked, added some data to report and now it doesn't work.
Nancy Hoye

Hi Nancy ,
<ROOT>
<DATA>
<ORDER_NUMMER> </ORDER_NUMMER>
</DATA>
<DATA>
<ORDER_NUMMER> </ORDER_NUMMER>
</DATA>
<DATA>
<ORDER_NUMMER> </ORDER_NUMMER>
</DATA>
</ROOT>
if this was the data , that code would work :)

Page naviagation doesn't work after deploy ADF application to Weblogic

After deploy my ADF application (ear) to Weblogic Server, the page navigation doesn't work. When running the ear on weblogic, I got following warnings:
<2010-11-5 下午05时06分01秒 CST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HwtOrder is not versioned.>
<2010-11-5 下午05时06分38秒 CST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DHwtOrder%2CType%3DAppDeployment%22%29.>
<2010-11-5 下午05时07分33秒 CST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=DiagnosticsViewDomainLogTablePage&DiagnosticsViewDomainLogTablePortlethandle=com.bea.console.handles.LogDispatchHandle%28%22DefaultServer%3BDomainLog%22%29.>
I can run the application correctly in jdeveloper 11g environment. I think there is something wrong with deployment. Can anyone help me?

When you target url with .jspx, you are running the page itself, not in the task flow context, so navigation doesn't work.
In the task flow, your page has 'Activity ID' (which is, for example, 'mainPage' for mainPage.jspx) and the navigation is defined for activity IDs, not pages.
Pedja

Google page translate doesn't work

Hi,
Google translate page translate doesn't work in firefox 29.0.1 (mac osx).
Translate.google.com -> type in url in the box and then translate gives me
"This page was not retrieved from its original location over a secure connection."
and then nothing happens. I cleared caches and cookies, also did safe mode to disable all add-ons, still doesn't work.
Google translate does work in other browsers (Opera 12.16).
Can someone tell me how to fix this?
Thanks

You can look at an extension like one of these.
*FoxLingo: https://addons.mozilla.org/firefox/addon/foxlingo-translator-dictionary/
*ImTranslator: https://addons.mozilla.org/firefox/addon/imtranslator/

When I want to DL an app and after I enter my ID and password , DL starts . But then a message shows up and want me to verify my payment info. And redirects me to that page . Every thing I do on that page it doesn't work and then I can't DL.

When I want to DL an app and after I enter my ID and password , DL starts . But then a message shows up and want me to verify my payment info. And redirects me to that page . Every thing I do on that page it doesn't work and then I can't DL.

Do this on your iTunes program on the computer instead. Your Credit Card used on the profile is probably maxed.

CTRL+break doesn't work, cannot boot on Rommon.

GoodDay to All,
Im using a 1750 router, and then i upgrade it to higher version, after
then i reload it, the problem it does not goes to start-up mode or
even the rommon mode,not enough memory to load the image, it always
rebooted after the self-decompressing image,
I try to stop it using the CTRL+Break, but it doesn't work.
Here are the error message.
Smart Init is disabled. IOMEM set to: 20
Memory required: 31637548 bytes, Memory available: 25165824 bytes
INSUFFICIENT MEMORY TO LOAD IMAGE!
The difference between Memory required and Memory available is the additional
memory you need to run the router. Alternately, use a smaller image; this
may cause the memory requirement to decrease, and may allow you to at least
use the router with reduced functionality until you get more memory.
*** System received a Software forced crash ***
signal= 0x17, code= 0x200, context= 0x8000620c
PC = 0xffffffff, Vector = 0x200, SP = 0xffffffff
System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C1700 platform with 24576 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x6b4628
Self decompressing the image : #################################
################# [OK]
Smart Init is disabled. IOMEM set to: 20
Thanks,
Lester

Hi Lester,
After trying all the above suggestions, if you still are facing issues then open the router's box and take out the Flash SIMM... it will try to look for an IOS file thrice and then will fall into rommon automatically
You can use the following link for hardware installation:
http://www.cisco.com/en/US/customer/products/hw/routers/ps221/prod_configuration_guide09186a0080099429.html#wp1077820
After you are in rommon, issue the command "confreg 0x2100" and "reset" the router, you will again go into rommon
Then insert the FLash once again in the chassis and then bootup again, because of config-register 0x2100, the router will go to rommon and then you should check the new IOS that you are trying to install.
Your router should have sufficient amount of DRAM to load that IOS, infact it'll help if you post the exact file names of the previous IOS and the new IOS along with your routers DRAM and Flash Capacity (But this is a secondary task which we can think of once you are able to go into rommon)
Regards,
Neeraj

Custom Page Sizes doesn't work

I have set up a few custom page sizes but when I try to used them, it doesn't work. Well once in blue moon it does.
I can't find a consistent way that it does. I have read all the online help and followed the process to the letter, but when I select the page size under Paper Size it doesn't change the paper size.

J,
There definitely are problems with Custom Page sizes. I don't have enough specifics to formulate what I would consider good feedback to Apple, something that they could easily act on.
I can tell you that if you set your System Preferences > International > Formats > Measurement Units: US and Set your Pages > Preferences... > Rulers > Ruler Units: Inches, you can create the size you want and it will stay selected and not pop back to the default. Here's what I have:
Again, I know that there's a problem. If you wish, you can use the setup I outlined and get the job done and later take up the cause of fixing whatever is going on with the CM units.
To Fruhulda, you noted that 9 cm by 6 cm is a size that fails as J described - and I confirmed here. However to get a successful size I found that I could use 3.53" X 2.35" (8.97CM X 5.97CM), a very close compromise. There clearly are problems with measurement units in Page Setup.
Regards,
Jerry

Stop sending us to the troubleshooting page, it doesn't work!!

You can't keep sending thousands of people to the troubleshooting page because you
know darn good and well it DOESN'T WORK! How about sending us a real fix???

"we" send you an article because it is a starting point of reference to begin trial and error
if manual and auto install of all Apple software does not work then heavier artillary.
error messages etc
And having been in the same boat, and I was using "Mint" for my iPod and their service is totally screwed up and that is my financial instution and I just don't want anything to do with Mint at this point.. I got boiling mad at them.... so I do know what it feels like.
Okay. I can say that I had trouble with iOS and new iPod and found a PC hadn't used much that worked. I also tried clean installs on Windows 8 Preview just to see, and that works.
apple is doing better but their 64-bit support and drivers/apps have not been that good even after 5 yrs? with Vista and counting, it now puts things "where they belong" better but the normal uninstall leaves behind old versions and files, so takes manual labor.
And want to make sure you have been down that path.
I spent a day on a new OS, pulled the old OS drive, been two years no real issues with Windows 7 until now, this and iOS.
iTunes 10.5 does run better under Windows 8 Dev Preview than it ever did more me under 10.4 and Windows 7 (64-bit Pro SP1).
Even a normal uninstall does not remove everything, and some things are in wrong location directories. Normally Apple leaves older versions around which never made sense and can interfere.
Not just iTunes but ALL Apple software needs to be uninstalled and removed. Look for any Apple related and look for "Lockdown" and WOW64 if needed to find "Quicktime" remnants.
https://support.apple.com/kb/HT1923

Page Link Doesn't Work

Hey Everyone,
I have built a page in iWeb and everything worked fine. I came back to it today and now when I publish it the "Home" link that is automatically generated on the top of every page doesn't work on one of the pages. It works fine on all of the other pages but not on that one. What gives? I've tried it locally, from a server, and on several browsers. The curser doesn't even recognize it as a link.
Any suggestions would be appreciated. Thanks!!

http://www.ryan-mccambridge.com/test/AV_Website/technicians.html
click on home and hold the click, move the cursor around and you will see that "Marcus Wichert" moves around with your cursor...
Go to iWeb and hit ShiftCommand(Apple)L you will se the border lines of the objects appearing and you will see that it is over the menu, move it downwards.
Regards,
Cédric

RSS Viewer doesn't work in SP 2013 publishing pages

Hi,
I have SharePoint 2013 site with Publishing enabled. When I add RSS Viewer to a page and save, it works well (still unpublished). When I publish the page it doesn't load the RSS Viewer. Progress bar is moving continuously but no outcome.
I have dug out the internet for a proper solution but couldn't find any. A proper solution or reason from the community is much appreciated.
Thanks.
LK

Hi,
According to your post, my understanding is that the RSS viewer web part progress bar was still loading while the page publshed.
The issue may be related to the browser, you can check with the following steps.
Use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
Or add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can use other browsers to check whether it works, such as Firefox, Chrome
Best Regards,
Jason
Jason Guo
TechNet Community Support

Page Break does not work in PDF report when deployed to App Server

I have a report with a PAGE Break before on a repeating frame that holds a matrix report. In reports designer on the PC, the report correctly shows the page break. When deployed to the app server, the report shows the page after the break superimposed on top of the page before the break.
The report has a repeating frame that spans both pages and holds the header information (page 1), and the matrix report (page 2).
Any suggestions on how to fix this would be greatly appreciated.
Deb

Crystal Reports Designer 2008 and Business Objects Enterprise XI release 2 are not in the same suite release. You should use Crystal Reports Designer XI release 2 to connect BOE XIr2.

The "add page" function doesn't work

I'm creating a photo book in iPhoto but the "add page" / "delete page" function is not working.
Please advise of an other way to add a page. There are only 23 of them.
Thanks for your help !

There is only one way - what version of iphoto and of the OS do you have? What does happen? What has recently changed?
for iPhoto '11: Add, remove, and reorder book pages
LN

Before Part Page Break Does Not Work

In my database I've defined a sum-summary part. When I check the "Page break before part" checkbox, no page break appears. When I check the "Page break after part" checkbox a page break does appear but of course this is not where I need the page break.
Is this a known bug? If so, is there a workaround? If not, what might I be doing wrong?
TIA
-eileen

It is there but you don't see page breaks within the Outline View.
Outline View is not a way of looking at the layout but at the order of the content and its hierarchy ie its 'Outline'. This is the view that lets you fold up subsiduary sections and grab titles with all the underlying text and drag them from one location to another.
Save inserting the breaks to the normal view.
Peter

How to add a page break after 40 records in a BI Publisher word template

I have a report with one Group and sub total for each group. I want to check before the start of a new group if the # of rows displayed per page is > 40. If it is >40 I would rather start the new Group on a new page instead of starting at the bottom of the page.
I have tried something like this but it is not working:
<?if:position() mod 40 = 0?>PAGE BREAK APPLIED<?split-by-page-break:?><?end if?><?end for-each-group?>
Anyone has any ideas ?
Thanks in advance for any assistance you can provide

Please do not post same questions repeatedly.
GENERATION OF REPORT USING SQL OR PL/SQL
See PAGESIZE,NEWPAGE SQL*PLUS commands.

Page break doesn't work in my BI Publisher template

Similar Messages

Maybe you are looking for