Page redirect based on data

Page 1 has the link with empid 1;2;3. when i clik on this link redirect to page2
if the data in empid only 1 then do not redirect to page2 just skip that page and redirect to page3
How can i acheive this

There are a number of ways to solve this
In your SQL, create a column that decides the page number, eg:
decode(emp_id,1,3,2) destThen in your action link definition, use column value as the page number #DEST#
Or generate your entire URL within the SQL.
Scott

Similar Messages

How to schedule the webi report based on data changes in the report data

Hello,
I want to schedule a webi report based on data change in a column in the report.
The scenario is something like below:
1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
Anybody done this before.
Thanks
Gaurav

Hi,
May be these links can help you:
http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
SEM-BCS: Load from data stream schedule
Attribute Change Run

How to display data from a recordset based on data from another recordset

How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.

Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
>

Hide Repeating Frames based on data value

Hello,
Wonderful forum. Hope someone out there can give us input on this one. We have a report where we would like to show a different layout depending on the data value from the master query. One layout occupies a full 8X11 page and the second layout occupies 1/3rd of a page. Is it possible to hide one reapeating frame and show the other based on data value? This would be a multiple page report and each page will have to take the correct payout depending on the value of the data in the row.
I appreciate any input on this. Thanks
Ravi

Thanks for you input. I appreciate it.
I am having a problem doing this. Let us say i have 2 differnt paper layouts. I want to show or hide one of the layouts based on a data value.
The problem i am facing is that the 2nd instance of true value for showing the 1st layout is over lapping the 1st instance of the 2nd layout thus showing 2 layouts overlapping each other on the same page. I know this is confusing but i will attempt to give an example:
page 1 shows - layout #1 only is showing based on result of data value. This is good.
page 2 shows - layout #2 shows based on data value, but also the 2nd instace of layout #1 (what ever data record satisfies layout #1 rule) is also showing over layout #2. So both the layouts are jumbled up on 1 page.
Essentially conditional formatting on layout #1 is not able to recognize that there is a 2nd layout taking its place and thus showing the layout #1 whenever it finds data which satisfies the condition on the 2nd page and so on..
Any help is greatly appreciated.
Thanks..

Changing JFMAIN based on data

Hi,
I've been really struggling to get this working for a few days and near the point of giving up!!
I'm using output designer 5.4 and I'm trying to change jfmain for the whole document based on data in the file, so if the field type is A, then set it to JFMAIN_A and if it's B, set it to JFMAIN_B. I've nearly got it working by at the top of JFPREAMBLE (just below ^FILE DOCVAR:JFPREAMBLE_1 DICTIONARY) putting the following two lines.
^page JFMAIN_A
^define group:SWITCHPAGE @_$_.@(IF("@TYPE."=="A","\pageJFMAIN_A\field$POSITION\subformHEADER.","\pageJFMAIN_B\fiel d$POSITION\subformHEADER.")).
The only problem with this is that it always prints a page with just the elements (two graphics logos) of JFMAIN_A then prints the report with the correct JFMAIN, either A or B.
If I don't do the
^page JFMAIN_A
It never changes the JFMAIN.
I've tried loads and loads of different permutations of this but nothing works.
Any help would be massively appreciated.
Mike

Hi there,
Not sure if this will help.
Keep the two foundation pages as JFMain and JFMain_B. By default the central server looks for JFMain for the first page.

Selected page item has no data

1) After I create the new data model, and start the EP_LOAD_MAIN how can I see the sales history table in the colaborator workbench? I only see the hierarchy of levels ,and in the right of the page, I have the message "Selected page item has no data" and an empty graphic background. Is there something with the Analytical Engine?
2) There are several errors in the Engine Administrator after i start it:
08:59:51:234 ERROR INSERT INTO SQL_DEF (COMMENTT, LINE_NO, SQL_ID, SQL_TEXT) VALUES ('Aggri Level 201',1,201,'SELECT min(sales_date) datett, round(NVL (sum(#quantity#),sum(#fore#))')
08:59:51:234 ERROR - ErrorDescription: ORA-00001: unique constraint (DEMANTRA.SQLD_PK) violated
In the PL/SQL developer the SQLD_PK doesn't exist

Hi DCRO,
1) After I create the new data model, and start the EP_LOAD_MAIN how can I see the sales history table in the colaborator workbench? I only see the hierarchy of levels ,and in the right of the page, I have the message "Selected page item has no data" and an empty graphic background. Is there something with the Analytical Engine?
I am assuming that before starting EP_LOAD_MAIN, data is present in the staging tables (T_SRC_XXX). So once EP LoAD MAIN completes data should be available in Items, Location and Sales_data tables. Then whenever you try viewing data on the worksheet through the collaborator Workbench (Contains links of the worksheets) based on the aggregation levels(item,location and time) selected in the worksheet definition, the data is displayed on the right side of the worksheet.So in your case, check for the levels and the members under the levels that have been selected in the worksheet. Analytical engine is for generation of forecast (either by Batch / Simulation / Other profiles) and has got nothing to do with the empty graphical background of the worksheet.
2) There are several errors in the Engine Administrator after i start it:
08:59:51:234 ERROR INSERT INTO SQL_DEF (COMMENTT, LINE_NO, SQL_ID, SQL_TEXT) VALUES ('Aggri Level 201',1,201,'SELECT min(sales_date) datett, round(NVL (sum(#quantity#),sum(#fore#))')
08:59:51:234 ERROR - ErrorDescription: ORA-00001: unique constraint (DEMANTRA.SQLD_PK) violated
In the PL/SQL developer the SQLD_PK doesn't exist
The error message itself points to some Constraint violation in the procedure. Check the procedures that have errors after the rebuilding of Data model. Recompile them and then try running the Engine Administrator.
Also, I would suggest you to go through the Oracle Discussion Forums FAQ so that your queries are answered effectively and efficiently.
Thanks and regards,
Shekhar

HTTP Redirect based upon SRC IP Address

Is there a way to perform an http redirect based upon user's source IP address on the CSM/GSS environment?
Logic:
IF < src ip address is within exception list > THEN
http redirect to URL2
ELSE
http to URL1
END

Is there a version of this solution (redirect by client source IP) for the CSS?
I'm attempting to redirect clients from a few specific networks (source IP's) to the VIP of a second CSS using a service-type redirect and "prefer " ACL commands:
clause 10 permit any 1.1.1.0 255.255.252.0 destination content owner/content-rule prefer service-type-redirect
There is an "any any destination any" last clause in the ACL for the remaining source IPs. The ACL is applied to the incoming circuits leading to the webservers.
A show of the ACL's shows all responses - no matter the client source IP - being caught by the permit any clause at the end of the ACL.
Extra points: this is a one-arm design with source group destination applied (to return server traffic to the CSS) and traffic is https with SSL terminating at the servers (no SSL module). Content rules are set to be sticky for srcip. Both CSSs are answering content-based DNS queries for the same URL with their local VIP address (but controlling which DNS server clients query isn't readily possible, so static proximity using DNS didn't provide the answer).
Each CSS is in a different data center: the idea is to keep traffic local by redirecting non-local traffic to its "local" (the other) CSS if services are active (and to keep traffic on the first CSS if the services at the redirected-to CSS are down).
Don't want too much, do I? ;-)
Thanks for everyone's time -
-K.

How to get fiscal period based on date and Fiscal year?

Hi Guys,
           Can anybody tell me how to get Fiscal period based on date and Fiscal Year or fiscal year variant?
Thanks,
Gopi.

Hi,
Please refer the code below:
*: Report: ZFISCALYR                                                  :
*: Date : 2004                                                       :
*: Description: Demonstrates how to return the corresponding fiscal    :
*:              year and posting period for a company code and posting :
*:              date or posting date and fiscal year variant.          :
REPORT zfiscalyr NO STANDARD PAGE HEADING.
TABLES: ekko.
PARAMETERS:     p_bukrs TYPE ekko-bukrs,
                p_bedat TYPE ekko-bedat.
DATA: gd_fiscalyr TYPE bapi0002_4-fiscal_year,
      gd_fiscalp   TYPE bapi0002_4-fiscal_period.
DATA: gd_fiscalyr2 TYPE T009B-BDATJ,
      gd_fiscalp2 TYPE bapi0002_4-fiscal_period.
DATA: gd_periv     TYPE t009-periv.
*START-OF-SELECTION.
START-OF-SELECTION.
* get fiscal year and period - (requires date and company code)
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
    EXPORTING
      companycodeid = p_bukrs
      posting_date = p_bedat
    IMPORTING
      fiscal_year   = gd_fiscalyr
      fiscal_period = gd_fiscalp.
* Alternative fiscal year function module
* - (requires date and fiscal year variant code from T009 table)
* gets first entry in fiscal year variant table (will need to choose
* correct one from table rather than just using first entry)
SELECT SINGLE periv
    FROM t009
    INTO gd_periv.
* get fiscal year and period
CALL FUNCTION 'DETERMINE_PERIOD'
    EXPORTING
      date                      = p_bedat
*    PERIOD_IN                 = '000'
      version                   = gd_periv
   IMPORTING
      period                    = gd_fiscalp2
      year                      = gd_fiscalyr2
   EXCEPTIONS
      period_in_not_valid       = 1
      period_not_assigned       = 2
      version_undefined         = 3
      OTHERS                    = 4.
*END-OF-SELECTION.
END-OF-SELECTION.
WRITE:/ 'From function module: BAPI_COMPANYCODE_GET_PERIOD',
        / 'Fiscal year is:', gd_fiscalyr,
        / 'Fiscal period is:', gd_fiscalp.
SKIP.
WRITE:/ 'From function module: DETERMINE_PERIOD',
        / 'Fiscal year is:', gd_fiscalyr2,
        / 'Fiscal period is:', gd_fiscalp2.
Thanks,
Sriram Ponna.
Edited by: Sriram Ponna on Apr 17, 2008 8:59 PM

Create a page redirection

Hi All,
Oracle Portal 10.1.4.2.0 (Build: 197)
I have a user that is moving a substantial chunk of pages around on our company portal (example moving http://companyportal/portal/page/portal/pageGroupA/path/to/sectionA to http://companyportal/portal/page/portal/pageGroupA/new/structure/sectionA).
We have changed the top page of the old structure to be a notice saying "These pages are out of date. Click here to go to the new section.". However, there are a lot of pages under the "old" structure, and I want to know if I can get a redirect happening so that anyone who goes to a page under the old structure will be redirected back to the top of the old structure and thus see the out of date message and be forced to change their bookmarks etc.
SO, anyone going to http://companyportal/portal/page/portal/pageGroupA/path/to/sectionA/blah/someOtherPage will then be redirected to http://companyportal/portal/page/portal/pageGroupA/path/to/sectionA and see the "out of date" message.
Thanks for any assistance!
Rob

Thanks for your reply scott, at least someone is there to understand it :).
Well ok just forget everything and focus on it, I am using apex version Apex 3.0.1 with Oracle 9.2.0.1.0, my question is simple as i had stated above long time ago, I have added a new scheme/role 'REGIS' as same as EDIT role and changed EDIT to REGIS on that scheme/role, through this I just want to access only guest user to log in temporarily and create its account in our application and log out, and when he registered in our application, a role EDIT will assigned him automatically and he will be able connect our portal with EDIT role now.
I had created a simple HTML page and created a Navigation List on it.
there are 5 list entries on this page .
1. Administration
2. New User Registration.
3. Student schedule.
4. Student results
5. Student attendance.
-Administration
(assigned ADMIN , so only administrator can see this link and all the entries)
-New User Registration
(only guest user with REGIS role can see this link)
-3,4,5
(only registered users with EDIT role can see these links)
I have set these authorization in every list entry with authorization schemes mentioned above.
Q. But the problem in this situation is that when I assign REGIS scheme to my 2 list entry, all other entries (3,4,5) including 2nd entry are also visible to guest user who has REGIS scheme assigned.
I hope now you can understand clearly what I am trying to say and understand it.
Hoping for your prompt reply.
regards
qamarsyed

OA Tutorial Create Page pt2 - Where is data saving?

Hello!
I am working through the framework tutorials in jDeveloper. I am running 9.0.3.12.25 with OA 11i. I am currently in Chapter 2: Core Lessons, on the Create - Part 2 tutorial. Everything seems to be working ok...I can create an Employee and search for them and view them in the LOVs and the results. Here is my question - where should this data be saving? My EmployeeEO shows AK.FWK_TBX_EMPLOYEES for Schema Object. My EmployeeFullVO is based on a query that is pulling from AK.FWK_TBX_EMPLOYEES. However when I query this table, I am not seeing any new employees being created - just the original 7 that were seeded. Does anyone have any suggestions as to where else I should be looking?
Again - I am not getting any errors when I create the new employee. I can then return to my Search page and query up the Employee that I just created, as well as employees that I created yesterday. The only other odd behavior that I am seeing is that the Full Name is not being displayed, but all other fields are. Also, I am extremely new to the OAF, so please bear with me :)
Thanks!
Janel
Edited by: user468440 on Nov 17, 2009 11:16 AM
My apologies, I didn't notice until after I posted that this was under the incorrect user.
OA Tutorial Create Page pt2 - Where is data saving?

Hi
Please check with the DBC file ,and the database u connected to ,verify that u are quering the database from backend and entry in dbc file is same .
thanx
Pratap

Process Chain - How to make decision based on data in PSA and execute DTP

Need to create process in Process Chain, which will execute the DTP based on data in PSA.
Say we have two DSO A & B, both getting data from same datasource.
In process chain, we need to read data in one of the date field in PSA and make a decision, which DTP to get execute in process chain.
Say if date field contains year = 2000, than load to DSO A, if year is 2001, load data to DSO B.
Suggest the solution. ...

Hi,
Tyr this steps.
1) Develop ABAP process types
ABAP report to read PSA data using function module
Trigger events based on year
event1 -> for even year data
event2 -> for add year data
2) Develop local process chains for each DTPs and schdule it with events mentioned above.
Do reply with comments.

Batch Determination based on date of consig recieve

Hi,
I am getting problem when i am trying to do manual batch determination in the outbound delivery.
I have created a record in VCH1 based on customer/Material/Plant. In this i have maintained a sort rule also. what characteristaics i must use to make my batch determination based on customer consignment recieving date?
If i go in MSC3n with Material, Plant and batch data then in the screen ( table MCHA, MCH1) onlt data available is for ERSDA, LAEDA and LWEDT.
In delivery when i click on batch determination button. my Sort rule is not automatically determined. So i have to maunally entered my soirt rule but at the same time my qty proposal in the same screen is 1 which is nothing but
FORM CHMVS_001.
DATA: lv_line TYPE kondh-chasp VALUE '1'.
LOOP AT disqty.
 CHECK lv_line <= no_of_split.
 IF QUAN_TO_DIS > 0.
 IF DISQTY-AVAL_QUAN > QUAN_TO_DIS.
 DISQTY-QUANTITY = QUAN_TO_DIS.
 ELSEIF disqty-aval_quan > 0.
 DISQTY-QUANTITY = DISQTY-AVAL_QUAN.
 ENDIF.
 IF disqty-quantity > 0.
 quan_to_dis = quan_to_dis - disqty-quantity.
 MODIFY disqty TRANSPORTING quantity.
 ADD 1 TO lv_line.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDFORM
When i am taking characteristics LOBM_VFDAT for sort rule in Cu70 then i am not getting batch determination as i required even if i maintained Shelf expiry date in MSC3n.
Please suggest where i must look into so that my batch determination would be based on date of consignment recieved.. currently if it s taking based on max qty available in MMBE.
Regards
Nitin

I have already assigned sort rule in VCH1 but dont know which Characteristics i must assign for customer consignment stock on FIFO basis. Could you please tell me the characteristics for it which i must consider?
LOMB_VFDAT i have already tried but its not working for me.
Edited by: Nitin Agarwal on Oct 30, 2008 8:14 AM

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How to remove a text in browser: Some plug ins used by this page are out of date

How to remove a text in browser: Some plug ins used by this page are out of date. It occur in every page when I surfing. I am aware that is a threat but when I tried to install an update of flash the userinit.dll file from windows registry had gone and I had to reset everything.

a error during the flash update might be itself an indication of malware active on the pc. the browser is your door to the web - therefore it's very important to keep it and all plugins up to date in order to keep your pc & the integrity of your personal data safe.
[https://www.mozilla.org/plugincheck/]

MDX calculation based on date logic for the Jan 1 of current year through the 15th of the previous month

Hello,
We need some help with an SSAS MDX query based on date logic. One of the problems is that I don't have access to the Cube but have been given a query example with the logic needed for the calculation. Here's the scenario;
The ETL process will run on the first Tuesday after the 15th of a given month. The Analysis Cube data queried should include the current year up to the end of the previous month. For example, on May 19th
(the first Tuesday on or after the 15th) the query should include data from January 1st through April 30th.
The 15th of the month is not part of the query, it is a factor in when the query is run. The query will always be in terms of complete months.
SELECT
 NON EMPTY { [Measures].[Revenue Amount],
 [Measures].[Utilization],
 [Measures].[AVG Revenue Rate],
 [Measures].[Actual Hours] }
ON
 COLUMNS,
 NON EMPTY { ([dimConsultant].[User Id TT].[User Id TT].ALLMEMBERS * [dimConsultant].[Full Name].[Full Name].ALLMEMBERS * [dimConsultant].[Employee
Type].[Employee Type].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION,
 MEMBER_UNIQUE_NAME
ON
 ROWS
FROM
 ( SELECT
( { [dimDate].[Week Date].[1/4/2015], [dimDate].[Week Date].[1/11/2015], [dimDate].[Week Date].[1/18/2015], [dimDate].[Week Date].[1/25/2015], [dimDate].[Week Date].[2/1/2015] } )
 ON
 COLUMNS
 FROM
 ( SELECT
( { [dimIsBillable].[Is Billable].&[True] } )
 ON
COLUMNS
 FROM
[SSASRBA]
WHERE
 ( [dimIsBillable].[Is Billable].&[True], [dimDate].[Week Date].CurrentMember ) CELL PROPERTIES VALUE,
 BACK_COLOR,
 FORE_COLOR,
 FORMATTED_VALUE,
 FORMAT_STRING,
 FONT_NAME,
 FONT_SIZE,
 FONT_FLAGS

Hi Hans,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Simon Hou
TechNet Community Support

Page redirect based on data

Similar Messages

Maybe you are looking for