Page that resize automatically to adjust to  any resolution (like google)

Hello all :\
I'm doing a webpage using both photoshop (+sitegrinder) and dreameaver. The problem is that the resolution of my PC  in kinda different from other PC's resolution  (1280x1024) and when it doesn't  dispalys correctly in other monitor (the site becomes  big  with scroll bars). I would like to know if there's a way to adjust the resolution automatically fitting the resolution of the user monitor (like the google site) -> In any monitor resolution  the scroll bar doesn't appear.  For you to understand better please see my site:
http://resumaovestibular.com
[]'s
John

The way they did it is with PNG images. Just use a graphics editor like Photoshop or Fireworks and set the transparency.  If it will be a solid color you can just create a small 1x1 or 5x5 image with a background color.  Change the opacity and then save as PNG.  For Photoshop specifically you have to save as PNG-24 because the PNG-8 in Photoshop does not support transparency.  Then use that as your background.  If you look at the source of that page they use the #wrapper ID to do this and the code is:
#wrapper {
     width: 500px;
     margin-left: 50px;
     background: url('../image/trans_reverse.png');
     min-height: 100%;
     padding: 20px 50px;

Similar Messages

  • My computer broke and I got it fixed. It doesn't say that the hard-drive was replaced, but I can tell my data is gone, including Pages that I bought. Is there any way of getting that without paying for it again?

    My computer broke and I got it fixed. It doesn't say that the hard-drive was replaced, but I can tell my data is gone, including Pages that I bought. Is there any way of getting that without paying for it again?

    Or if you purchased Pages as part of iWork on a disk, reinstall from the same disk.
    Best of luck.

  • How do I create a newsletter with facing pages that have the margins adjusted for stapling the pages on the left side? ...Like a book.I hate the new pages.

    Can anyone recommend a program for newsletters that makes sense.  I used AppleWorks and the old page without any problem. Facing pages, two columns, text boxes, photos, mastheads.   The new pages *****! I can't adjust spacing between lines as needed, I can't adjust the margins for facing pages. Inspector is not what it used to be.  If I use Pages '09 v. 4.3 (1048), I am not allowed to make corrections. My choice is cancel, update, or correct a copy which is no longer '09.
    iMac OS X Yosemite 10.10.1
    Pages 5.5.1 (2111)

    How are you "not allowed to make corrections"?
    Peter

  • Everytime I open Firefox, I either get a not responding page or a new tab page that won't let me open any website.

    I am starting to get tired of not being able to use my Firefox web browser because everytime I do, it either opens and doesn't respond or it opens but it doesn't let me access any website or even my bookmarks.
    I am having to use Google Chrome (which I do not like) but I can't update anything because I am not using Firefox or Internet Explorer.

    Hi akadeejay,
    probably your Internet security software (firewall or/and antivirus, antispyware) preventing Firefox from connecting to internet, see:
    [https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating Fix problems connecting to websites after updating Firefox]
    thank you

  • I have macbook pro and when I typing on any tabs like google search on writting an email it bugs

    My typing process block instantly when I fill the google search or when I writing an email and it warns me by the mac book pro bug sound. The only solution I found, is to select a zone outside of the writing area then select back the last letter I was typing.... This occur more often when I use deleted button (to correct a word writing) or when I want to move into the text writing.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Center website for any resolution

    hi all, i'm havig problems, centering my site to be viewed in
    any resolutio, i'm using frames and it's driving me crazy cuz i
    need that this site be centered for any resolution, is there an
    option in dreamweaver to do this?, can anyone give me a solution?,
    should i need to get rid of the frames?? please help
    www.xxasociados.com

    > Your original question - your layers are using absolute
    positioning
    > (specific number of pixels down from the top and over
    from the left), so
    > you can't center your content (as it is now) in a
    browser window without
    > some fancy javascript.
    That's wrong. It couldn't be simpler. Wrap the whole page in
    a centering,
    relatively positioned div. Now everything will center.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Alec Fehl" <[email protected]> wrote in message
    news:[email protected]...
    > I'd start by losing the Shockwave/Flash! After the
    "intro" page redirected
    > to the second page, Firefox crashed.
    >
    > Those "intro" Flash movies are "not cool" anymore ;-)
    Neither search
    > engines nor people like them very much.
    >
    > Your code is pretty bloated. You have the same
    Javascript functions
    > repeated MANY MANY MANY times in the HEAD.
    >
    > Your page will be very difficult to manage/maintain as
    your DIVs have IDs
    > like Layer1, Layer2, Layer3. You'll have no idea which
    is which if you
    > need to edit one.
    >
    > Your original question - your layers are using absolute
    positioning
    > (specific number of pixels down from the top and over
    from the left), so
    > you can't center your content (as it is now) in a
    browser window without
    > some fancy javascript.
    >
    >
    > --
    > Alec Fehl, MCSE, A+, ACE, ACI
    > Adobe Community Expert
    >
    > AUTHOR:
    > Microsoft Office 2007 PowerPoint: Comprehensive Course
    (Labyrinth
    > Publications)
    > Welcome to Web Design and HTML (Labyrinth Publications)
    >
    > CO-AUTHOR:
    > Microsoft Office 2007: Essentials (Labyrinth
    Publications)
    > Computer Concepts and Vista (Labyrinth Publications)
    > Mike Meyers' A+ Guide to Managing and Troubleshooting
    PCs (McGraw-Hill)
    > Internet Systems and Applications (EMC Paradigm)

  • How do I get new tabs/windows to open automatically such that I can see the entire page width without having to adjust the zoom?

    I cannot see much of the page when it automatically opens so zoomed in ...

    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  • Is there anyway to create a template that has automatic page numbering

    We have a template that we have to create, each page on the template has to have a page number.  We do a lot of edits and the pages change for example the page may start out as page 1 and after editing it is page 10.  Are there any codes I could use that would automatically number and renumber the pages.

    I don't think there is any property of templates that would give you that capability.  Sorry.  You can certainly suggest it to the dev team, though -
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Fireworks CS4 to CS6 - is there a setting that needs to be adjusted so that web pages look right in

    Fireworks CS4 to CS6 - is there a setting that needs to be adjusted so that web pages look right in Internet Explorer?  I was in the middle of creating pages with Fireworks CS4 and exporting them to Dreamweaver CS4 and publishing them to the website. Those pages looked fine. Then I upgraded to CS6 and the pages  look fine in  Fireworks, Dreamweaver and when I preview them "live" in Chrome but not Internet Explorer. Anyone know why?  Also, with upgrading the software I upgraded to a new computer.  Any and all suggestions are welcomed.  Thanks!

    Most likely caused by a missing document type declaration (DTD).  Truth is, the HTML code generated by graphics apps is not web worthy.  It's really only intended for quick mock-ups to show a client before you rebuild everything with CSS & HTML code in Dreamweaver. 
    This 3-part tutorial describes how to take your Design from Fireworks or Photoshop to a CSS Layout in Dreamweaver.
    Part 1 - Initial Design
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
    Part 2 - Markup preparation
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
    Part 3 - Layout and CSS
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
    Nancy O.

  • On Firefox v.21, when I visit a web page that has an embedded video, I do NOT want it to play automatically. How do I turn this OFF?

    I checked my options settings for applications, and all of the known apps that play various formats of video files appear to be set to 'Always ask'. This does not resolve this problem, however. What I want to do is to set Firefox to NEVER automatically play ANY video that is part of a web page that I visit.
    How can I do this?

    If I am seeing it correctly, the message in the video box
    is reporting that the player has crashed. Reloading the
    page should fix it. If your player still does not work
    after reloading the page, you can go to the web page
    for the player and download the player again.

  • I could not exit Safari so had to Force Quit but when I open it goes right back to the Yahoo home page that would not close. There was a little light under the Safari icon which told me that Safari was still running. Any ideas??

    I could not get out of my Yahoo home page in Safari on my Imac. I had to force quit but when i opened back up the little light under the Safari icon was still on and when i tapped icon I was right back to the Yahoo page which would not close. Any ideas???

    Quit Safari (by force if necessary.) Relaunch it by holding down the shift key and clicking its icon in the Dock. That will stop the page from reloading automatically.

  • I get Singed out of eBay when I bid and when I go to a other item.. I can be on "my eBay" and just click on any other item and boom I'm on a page that says I need to sing in.

    I get Singed out of eBay.com when I bid and when I go to a other item.. I can be on "my eBay" and just click on any other item and boom I'm on a page that says I need to sing in..if I click back it brings me back to "my eBay" and I am still singed in but if I was not to click back and I click on sing in I have a page saying I singed out.. sooo I do the obvious and clean out the cache and so on, disable all and then just some addons and try again and just to be sure I opened IE9 for the first time ever on this year old pc and it works fine so I know the problem is with FF4 but I'm out of ideas so what are my options? I dont wanna have to use IE9 but I need basic stability!!
    I give a A- on the rest of FF4 & that makes this even more annoying because I want to use FF4!! I make my butta on eBay.com so I'm on all day buying & selling so I really need a quick fix or I'll have to make a quick move to Opera or IE9..PLEASE DON'T LET THAT HAPPEN...LOL!!
    Please help me on this one & Thank you in advance to anyone who helps me I appreciate it allot!

    The Get Info. fields show up gray if the files is locked and iTunes knows it can't edit the file. Make sure the files are not marked as read only and, if necessary grant both your account and system full access to all files and subfolders of your media folder.
    You can set Part of a Compilation for multiple tracks from the Options tab of Get Info.
    See Grouping tracks into albums for tips on getting iTunes organized.
    tt2

  • My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files).

    My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files in it at all - not sure what it would be useful for then).
    Any suggestions?

    Question asked and answered several times.
    If you didn't save, nothing is recoverable.
    iWork apps don't create temp files so, as far as you on't save something, Time Machine can't archive it.
    Yvan KOENIG (VALLAURIS, France) mardi 5 juillet 2011 12:25:31
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own
    before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • When I go to a web page that page appears upper left, filling half of the screen. I have to manually go to View in the menu bar to get it to fill the page each time.  How can I get my Mac Mini to go to full page automatically when I visit a web page?

    When I go to a web page, that page appears upper left, filling only half of my screen top and bottom.  Each time I have to go to the menu bar View and go to full page.  How can I get the web pages to display in the full screen automatically??? This just started happening.

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
    LN

Maybe you are looking for

  • Can an iPhoto library be used/shared on multiple macs?

    I have a MacBook Pro and a MacMini and I want both to have the same iPhoto library so I do not have to identify faces and geo-tag the same pictures again.  Is this possible?

  • Time Machine to back up an external HD.

    My iTunes library is on an external hard drive. I would like Time Machine to include it in its backups. Can this be done? If not, is there other backup software I should consider? -Ron.

  • Getting error of CALL FUNCTION in coding

    hi all, i have wrtie a code for calling SMART FORM.In the coding START OF SELECTION,i got error at f_display_report This the code: FORM f_display_report .   DATA: fname(30) TYPE c.   CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'     EXPORTING       formna

  • KEND - restrict realignment run for a period only

    Hi All, I would like to restrict my realignment run using KEND for particular period only. 1) Is this possible by creating new characteristic? Or through any development activity? If possible which table or field is to be considered for creating char

  • Unable to renew developer license from vs2013

    this is what i get whenever i tried to renew my license . though it was working before installing vs2013 update 4 . whats wrong? ive also reset all vs settings and uninstall and installed again but not working.:( can anyone there to help me. binodtam