Page with one dynamic side

Hello
How can I create a page with a menu (based on a list) on the left side and in the right side a dynamic content, something similar to [Denes Kubicek: ApEx Demo Application|http://apex.oracle.com/pls/otn/f?p=31517:1:2889345291421940::NO:::]
Thanks in advance
Ownr

Hi,
I know - the styles are wonderful, aren't they!!
Yes, you can identify the "current" list items.
On the list entry definition, you should see two settings:
List Entry Current for Pages Type - set this to Colon Delimited Page List
List Entry Current for Condition - enter in the page number (should be the same as for the target page).
For the "parent" list items, for the second setting, you can use a colon-delimited list of all the pages that it is the parent for.
Then you may need to adjust the List Template that you are using (you're probably doing this anyway to improve the existing style!!).
In the template definition, there are several settings called ".... Current ...." - these need to be updated with your styles.
I have done an example app ([http://htmldb.oracle.com/pls/otn/f?p=28071:1]) with a multi-level list using the Tree List template (actually, I created a copy called Tree List Menu). This has the following settings:
List Template Before Rows:
<div style="width:150px;">
<ul class="htmlTree">List Template Current (This is also used for List Template Current with Sub List Items):
<li><a href="#LINK#"><span style="background-color:yellow;">#TEXT#</span></a></li>List Template Noncurrent (and .... with Sub List Items):
<li><a href="#LINK#">#TEXT#</a></li>Sub List Template Current (and ... with Sub List Items):
<li><a href="#LINK#"><span style="background-color:pink;">#TEXT#</span></a></li>Sub List Template Noncurrent (and ... with Sub List Items):
<li><a href="#LINK#">#TEXT#</a></li>After List Entry:
</ul><br style="clear:both;"/><br style="clear:both;"/>
</div>These are the ones that I've updated - any others, just leave as their defaults. It's not pretty - but I've done this just to show that it can be done!
Andy

Similar Messages

  • Magic Mouse  question. I have set this in Preferences by ticking Swipe between pages with  one finger and also Swipe between full-screen apps with two fingers,  however when I try to do the latter, the 2 finger swipe will take me only to the dashboard and

    It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers,  however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
    I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
    How can I correct this please?

    Just figured out it also does not work with the Mail app.

  • How to insert into 2 tables from the same page (with one button  link)

    Hi,
    I have the following 2 tables....
    Employees
    emp_id number not null
    name varchar2(30) not null
    email varchar2(50)
    hire_date date
    dept_id number
    PK = emp_id
    FK = dept_id
    Notes
    note_id number not null
    added_on date not null
    added_by varchar2(30) not null
    note varchar2(4000)
    emp_id number not null
    PK = note_id
    FK = emp_id
    I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
    Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
    In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
    How do I go about doing this?
    Thanks.

    Hi,
    These are my After Submit Processes...
    After Submit
    30     Process Row of NOTES     Automatic Row Processing (DML)     Unconditional
    30     Process Row of EMPLOYEES     Automatic Row Processing (DML)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    50     Insert into Tables     PL/SQL anonymous block     Conditional
    My pl/sql code is the same as posted earlier.
    Upon inserting data into the forms and clicking the add button, I get this error...
    ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
         Error      Unable to process row of table EMPLOYEES.
    Is there something wrong with the pl/sql code or is it something else?

  • Fill The Page with ONE Picture

    I would like to figure a way to fill the whole page with just one picture for my Home Page other than the various page links at the top. iWeb will only allow me to size the pic to about 50% of the page give or take. Does anyone know how I can get it to fill the entire screen?

    Create and publish your page.
    Open the page in a HTML Editor of your choice and paste this line at the top of the <body>.
    +<object width="100%" height="100%" data="url/to/your/picture.jpg" type="image/jpeg" style="position: fixed; top: 0px; left: 0px;"></object>+
    The image will scale when you resize the browser window.
    To get the idea, see this page:
    http://web.mac.com/wyodor/helloworld/helloworld.html
    It's not made in iWeb, but it will work there too.

  • Using Multiple FLV files on one page with one Flash Player

    I have a web site with 6 videos.  I am hoping to find help figuring out how best to develop the web page that will allow me to associate several FLV files with one Flash Player.  And to have each of the videos "launch" when triggered by a link containing the title.
    I have the video titles as links that will launch the associated FLV file when clicked.  It is a selection menu with the Flash player on the same page.

    I don't know which player you're using, but this is usually done with XML or Javascript files (playlists) because you can't directly link to FLVs and have them play in browsers.
    That said, Flash is dead as a web technology now because it isn't supported by all the latest and most popular web devices (iPhone, iTouch, iPads).  If you want to reach the widest possible audience with your videos, I would suggest using MP4 videos with an HTML5 player that supports playlists. 
    See Pickle Player
    http://www.pickleplayer.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • Merging  Pages with Detailed & Dynamic navigation

    Hello experts,
    We are in an Federated Portal senario with a main portal (consumer) and two producer portal (Bi & xRPM).
    What I need to know is if it is possible to merge in a same page an xRPM page with dynamic navigation and a BI page with detailed navigation.
    Thanks in advance for your response.
    David Burlin
    SAP Consultant
    http://www.hegedan.com

    Hi David,
    Did you ever find an answer to this?
    We're currently trying to use the Remote Role Assignment with XRPM Portfolio Management.  It works fine if we just use the out of the box Portfolio Management Role.  
    However, we're trying to use a custom role created on the producer and then merge it with another custom role on the consumer.  It starts out working fine until it attempts to redirect to content on the Portfolio Hidden workset.  Then it gives a runtime error.  Any help you could give would be great!
    Thanks,
    Ken

  • Cisco ASA 5505 L2L VPN Tunnel with one Dynamic IP

    Hi Rizwan,
    Thanks for your response.  I updated the configuration per your response below... It still doesn't work.  please see my new config files below.  Please help.  Thanks in advance for your help....
    Hi Pinesh,
    Please make follow changes on host: officeasa
    remove this line below highlighted.
    crypto dynamic-map L2LMap 1 match address Crypto_L2L
    It is only because group1 is weak, so please change it to group2
    crypto dynamic-map L2LMap 1 set pfs group1
    route outside 10.10.6.0 255.255.255.0 96.xxx.xxx.117
    Please make follow changes on host: homeasa
    It is only because group1 is weak, so please change it to group2
    crypto map L2Lmap 1 set pfs group1
    route outside 10.10.5.0 255.255.255.0 xxx.xxx.xxx.xxx default gateway on homeasa.
    Hope that helps, if not please open a new thread.
    Thanks
    Rizwan Rafeek
    New config files..
    Site-A:   (Office):
    Hostname: asaoffice
    Inside: 10.10.5.0/254
    Outside e0/0: Static IP 96.xxx.xxx.118/30
    Site-B:   (Home):
    Hostname: asahome
    Inside: 10.10.6.0/254
    Outside e0/0: Dynamic IP (DG: 66.xxx.xxx.1)
    SIte-A:
    officeasa(config)# sh config
    : Saved
    : Written by enable_15 at 15:34:23.899 UTC Sat Mar 3 2012
    ASA Version 8.2(5)
    hostname officeasa
    enable password xyz encrypted
    passwd xyz encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    switchport access vlan 3
    interface Ethernet0/2
    switchport access vlan 3
    interface Ethernet0/3
    switchport access vlan 3
    interface Ethernet0/4
    switchport access vlan 3
    interface Ethernet0/5
    switchport access vlan 3
    interface Ethernet0/6
    switchport access vlan 3
    interface Ethernet0/7
    switchport access vlan 3
    interface Vlan2
    nameif outside
    security-level 0
    ip address 96.xxx.xxx.118 255.255.255.252
    interface Vlan3
    nameif inside
    security-level 100
    ip address 10.10.5.254 255.255.255.0
    ftp mode passive
    same-security-traffic permit inter-interface
    access-list NONAT extended permit ip 10.10.5.0 255.255.255.0 192.168.100.0 255.2
    access-list NONAT extended permit ip 10.10.5.0 255.255.255.0 10.10.6.0 255.255.2
    access-list ormtST standard permit 10.10.5.0 255.255.255.0
    access-list OCrypto_L2L extended permit ip 10.10.5.0 255.255.255.0 10.10.6.0 255
    pager lines 24
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    ip local pool ormtIPP 192.168.100.100-192.168.100.110 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list NONAT
    nat (inside) 1 0.0.0.0 0.0.0.0
    route outside 0.0.0.0 0.0.0.0 96.xxx.xxx.117 1
    route outside 10.10.6.0 255.255.255.0 96.xxx.xxx.117 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 10.10.5.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set OSite2Site esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map OL2LMap 1 set pfs
    crypto dynamic-map OL2LMap 1 set transform-set OSite2Site
    crypto dynamic-map OL2LMap 1 set reverse-route
    crypto map out_L2lMap 65535 ipsec-isakmp dynamic OL2LMap
    crypto map out_L2LMap interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    client-update enable
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 10.10.5.101-10.10.5.132 inside
    dhcpd dns 8.8.8.8 8.8.4.4 interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    enable outside
    svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
    svc image disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 2
    svc enable
    tunnel-group-list enable
    group-policy ormtGP internal
    group-policy ormtGP attributes
    dns-server value 8.8.8.8
    vpn-tunnel-protocol svc webvpn
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value ormtST
    address-pools value ormtIPP
    webvpn
    svc keep-installer installed
    svc rekey time 30
    svc rekey method ssl
    svc ask enable default svc timeout 20
    username user1 password abcxyz encrypted
    username user1 attributes
    service-type remote-access
    tunnel-group ormtProfile type remote-access
    tunnel-group ormtProfile general-attributes
    default-group-policy ormtGP
    tunnel-group ormtProfile webvpn-attributes
    group-alias OFFICE enable
    tunnel-group defaultL2LGroup type ipsec-l2l
    tunnel-group defaultL2LGroup ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
    message-length maximum client auto
    message-length maximum 512
    policy-map global_policy
    class inspection_default
    inspect dns preset_dns_map
    inspect ftp
    inspect h323 h225
    inspect h323 ras
    inspect rsh
    inspect rtsp
    inspect esmtp
    inspect sqlnet
    inspect skinny
    inspect sunrpc
    inspect xdmcp
    inspect sip
    inspect netbios
    inspect tftp
    inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:46d5c2e1ac91d73293f2fb1a0045180c
    officeasa(config)#
    Site-B:
    Home ASA Configuration:
    homeasa# sh config
    : Saved
    : Written by enable_15 at 15:48:42.479 UTC Sat Mar 3 2012
    ASA Version 8.2(5)
    hostname homeasa
    enable password xyz encrypted
    passwd xyz encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    switchport access vlan 3
    interface Ethernet0/2
    switchport access vlan 3
    interface Ethernet0/3
    switchport access vlan 3
    interface Ethernet0/4
    switchport access vlan 3
    interface Ethernet0/5
    switchport access vlan 3
    interface Ethernet0/6
    switchport access vlan 3
    interface Ethernet0/7
    switchport access vlan 3
    interface Vlan2
    nameif outside
    security-level 0
    ip address dhcp setroute
    interface Vlan3
    nameif inside
    security-level 100
    ip address 10.10.6.254 255.255.255.0
    ftp mode passive
    same-security-traffic permit inter-interface
    access-list NONAT extended permit ip 10.10.6.0 255.255.255.0 192.168.101.0 255.255.255.0
    access-list NONAT extended permit ip 10.10.6.0 255.255.255.0 10.10.5.0 255.255.255.0
    access-list hrmtST standard permit 10.10.6.0 255.255.255.0
    access-list Crypto_L2L extended permit ip 10.10.6.0 255.255.255.0 10.10.5.0 255.255.255.0
    pager lines 24
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    ip local pool hrmtIPP 192.168.101.100-192.168.101.110 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list NONAT
    nat (inside) 1 0.0.0.0 0.0.0.0
    route outside 10.10.5.0 255.255.255.0 66.xxx.xxx.1 1   (IP address of the Dynamic IP from ISP)
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 10.10.6.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set Site2Site esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto map L2Lmap 1 match address Crypto_L2L
    crypto map L2Lmap 1 set peer 96.xxx.xxx.118
    crypto map L2Lmap 1 set transform-set Site2Site
    crypto map L2LMap 1 set pfs
    crypto map L2LMap interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 10.10.6.101-10.10.6.132 inside
    dhcpd dns 8.8.8.8 8.8.4.4 interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    enable outside
    svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
    svc image disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 2
    svc enable
    tunnel-group-list enable
    group-policy hrmtGP internal
    group-policy hrmtGP attributes
    dns-server value 8.8.8.8
    vpn-tunnel-protocol svc webvpn
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value hrmtST
    address-pools value hrmtIPP
    webvpn
    svc keep-installer installed
    svc rekey time 30
    svc rekey method ssl
    svc ask enable default svc timeout 20
    username user1 password abcxyz encrypted
    username user1 attributes
    service-type admin
    tunnel-group hrmtProfile type remote-access
    tunnel-group hrmtProfile general-attributes
    default-group-policy hrmtGP
    tunnel-group hrmtProfile webvpn-attributes
    group-alias hrmtCGA enable
    tunnel-group 96.xxx.xxx.118 type ipsec-l2l
    tunnel-group 96.xxx.xxx.118 ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
    message-length maximum client auto
    message-length maximum 512
    policy-map global_policy
    class inspection_default
    inspect dns preset_dns_map
    inspect ftp
    inspect h323 h225
    inspect h323 ras
    inspect rsh
    inspect rtsp
    inspect esmtp
    inspect sqlnet
    inspect skinny
    inspect sunrpc
    inspect xdmcp
    inspect sip
    inspect netbios
    inspect tftp
    inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:d16a0d49f275612dff7e404f49bcc499
    homeasa#

    Thanks Rizwan,
    Still no luck.  I can't even ping the otherside (office)..  I am not sure if i'm running the debug rightway.   Here are my results...
    homeasa(config)# ping inside 10.10.5.254............. (Office CIsco ASA5505 IP on local side.  I also tried pinging the server on other side (office) whic is @10.10.5.10 and got the same result)
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 10.10.5.254, timeout is 2 seconds:
    Success rate is 0
    homeasa(config)# debug crypto isakmp 7
    homeasa(config)# debug crypto ipsec 7
    homeasa(config)# sho crypto isakmp 7
                                       ^
    ERROR: % Invalid input detected at '^' marker.
    homeasa(config)# sho crypto isakmp
    There are no isakmp sas
    Global IKE Statistics
    Active Tunnels: 0
    Previous Tunnels: 0
    In Octets: 0
    In Packets: 0
    In Drop Packets: 0
    In Notifys: 0
    In P2 Exchanges: 0
    In P2 Exchange Invalids: 0
    In P2 Exchange Rejects: 0
    In P2 Sa Delete Requests: 0
    Out Octets: 0
    Out Packets: 0
    Out Drop Packets: 0
    Out Notifys: 0
    Out P2 Exchanges: 0
    Out P2 Exchange Invalids: 0
    Out P2 Exchange Rejects: 0
    Out P2 Sa Delete Requests: 0
    Initiator Tunnels: 0
    Initiator Fails: 0
    Responder Fails: 0
    System Capacity Fails: 0
    Auth Fails: 0
    Decrypt Fails: 0
    Hash Valid Fails: 0
    No Sa Fails: 0
    Global IPSec over TCP Statistics
    Embryonic connections: 0
    Active connections: 0
    Previous connections: 0
    Inbound packets: 0
    Inbound dropped packets: 0
    Outbound packets: 0
    Outbound dropped packets: 0
    RST packets: 0
    Recevied ACK heart-beat packets: 0
    Bad headers: 0
    Bad trailers: 0
    Timer failures: 0
    Checksum errors: 0
    Internal errors: 0
    hjnavasa(config)# sh crypto ipsec sa peer 96.xxx.xxx.118
    There are no ipsec sas
    homeasa(config)#

  • More effective way to do this page with one recordset instead of four?

    I just created a homepage for a client that is supposed to display real estate properties from four different categories sorted by the most expensive rent. Only way it seemed I could do it was to create a Query using QuB and then from that creating four recordsets. One for each category: Single/Studio Apartments, One Bedroom Apartments, Two Bedroom Apartments and Three Bedroom Apartments. Resulting page is here:
    http://209.62.4.98/~parishpr/index.php
    So yes, it does work and display nicely. But I'm wondering if there's a more effective way to do this using ADDT with just one recordset since I'm still kind of new to all this. The PHP code is posted here if you want to peek at what I did:
    http://209.62.4.98/~parishpr/index.txt

    Hello Adam
    i am afraid that there is no way to accomplish that cause you need in your case to view the four categories in the same page without any link points to them.
    so the best way that what you did four record sets will do it fine.
    i made such project before and you can have a look:
    http://www.amlakweb.com
    i hope it helps
    Waleed barakat

  • Can we use WDJ and WDA page with one process together ?

    Hi All,
    Thank you for your answer.
    Thanks and Regards

    Hi Zhiqiang,
    You can run a WDA and WDJ together on a single page using the portal. Communication between them is possible using portal eventing. Nonetheless, both will be different applications running on different platforms. Hence, it is not possible to i.e. define a component use to a WDA component from within a WDJ one and vice versa. That's similiar to not being able to integrate ABAP/Java coding directly within Java/ABAP.
    Best regards,
    Thomas

  • How do I create multiple TEBs with one submit button on one page in Captivate 7

    I've read other posts on this topic (which refer primarily to earlier versions of Captivate) and am still at a loss as to how to put multiple text entry boxes on a page with one submit button. Here's my scenario:
    I am creating test questions.
    Each test question has multiple text entry boxes (for numbers only).
    Student should be able to enter numbers into the textboxes in any order.
    Then there is one Submit button that should initiate validating all the text entries, and move to a scoring page (so I can test it). (What would be best is if this button not only did the above, but also submitted scores to the LMS.  But that is not my question at this time.)
    I'd like this question to be set up as a template so that I can duplicate it, be able to add or delete text boxes and change the values required in the text boxes.  
    Here is an image of a sample question page with multiple TEBs. The yellow boxes tell the student where they need to enter text:
    Any help or direction to help is appreciated!!

    I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz.  Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
    If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it.  But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
    You can learn more about the Master widget here:
    http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
    http://www.infosemantics.com.au/interactivemaster/help
    You can download a free trial version of the widget here:
    http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
    One caveat you should be aware of is that this widget is not HTML5 compatible.

  • In the new version there's no little arrow with back or forward so you can go back several pages in one click. I use that a lot. How can I get it back?

    I've just upgraded Firefox and no longer have little arrows by the back and forward buttons on the toolbar. This means I can only click back or forward one page at a time. I used to be able to click on the arrow, see a list of previous pages and then go back (or forward) several pages with one click. I looked at adding the History button to the tool bar but that's not as convenient.

    You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
    If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

  • Server errors result in blank pages with security enabled

    I have been working to security-enable my ADF 11 application using JDeveloper 11.1.1.0.0. Users, roles and grants all appear to be working as expected. However, I have discovered that server errors no longer appear once I put security in place.
    For example, take a simple JSPX page with one button, and attach an actionListener to the button. In the actionListener, throw an exception. When no ADF security is in place, this results in a 500 server error page, and the exception stack trace (or part of it) is written to the Weblogic console inside JDeveloper. Once ADF security is in place, the behavior changes. The result is a blank page (absolutely no content). Even worse, the exception stack trace is no longer written to the Weblogic console.
    I have tried to work around this by setting an <error-page> in web.xml, but it doesn't seem to make a difference. I do know that my <error-page> configuration works in general, because I have a "not authorized" error page set up to catch the ADF AuthorizationException, and that is displayed properly. I have also seen the error page invoked for errors that happen earlier in the rendering process (for instance, if I forget to set a default page in my bounded task flow).
    I don't have any idea where to start on this. Google hasn't been much help, possibly I don't know what I'm looking for.
    Anyone have any suggestions?
    Thanks,
    KEN

    We have found a solution to this problem, which we are going to go with until something better pops up.
    In the main unbounded task flow (adfc-config), we added a method call marked as the error-handler. In the method call, we log the exception, something like this:
        public void handleException() {
            Exception e = ControllerContextImpl.getInstance().getCurrentViewPort().getExceptionData();
            e.printStackTrace(System.err);
        }Then, the method call forwards to a JSP to display the error:
    <af:inputText label="Error" value="#{controllerContext.currentViewPort.exceptionData.message}"/>That gets us the equivalent of the old behavior.
    I still find it kind of strange that errors aren't displayed once security is enabled, but at least there is a workaround.
    KEN

  • In Pages, how can I make one page have one column on part of the page and two columns on part of the page?

    What I am trying to achieve is a page with one column for all the text I write, but I also want to show two tables (one placed beside the other, not underneath the other) so on the part of the page where I am showing these tables, I would like to have two columns. Is this possible? Underneath the tables, there is more text that should be in one column only.

    Use a layout break.

  • In the vertical page with scrollable content, i can´t swipe to next article. why?

    in the vertical version of the page with one scrollable content frame, i can´t swipe to next article. the scrollable content frame has in both versions the exact size of the page. in the horizontal version this works perfectly. Used folio builder v22, pdf and smothscrolling off.
    Message was edited by: lost in dps

    Thanks for the answer. But i found out, that it was my fault. A status of an object was outside the scrolling content frame. But thank you for the possibilty to ask questions.

  • How to print two sides with one page?

    I have a PDF that is one page long and I'd like to print the same thing twice (front and back) on one page. Can I do that?
    I've tried printing two copies with the printer set to double-sided, but it just printed two sheets with one side on each sheet.

    Well sure; Go back to the authoring application that created the documents and do a 2-UP page. Make the existingg page large enough to accomodate the extra content. Is that what you're asking or do you really mean print to a printer with a back up ? In that case just flip the page over and print page 2 on the other side.
    Or are we missing something ?

Maybe you are looking for

  • Taxes are not getting updated in PO

    Dear All, I have done some changes in pricng and tax calculation procedure. But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.

  • How to generate current time in the format yyyy-mm-ddThh:mm:ssZ in the xslt

    Hello, i am tring to generate current time in the format yyyy-mm-ddThh:mm:ssZ in my xlst file. the following info are necessary, <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:java="

  • Flash Chartin page 101

    Hi! I have a problem with      Flash Chart. When i created a Flash Chart in page 101, then i have an error: an end-tag was an encountered without a matching start-tag If i copy the page 101 as 102, then it's all right in page 102. In my opinion the p

  • Massive problem with audio interface

    Hi there. I recently bought a brandnew iMac 27" Haswell i7. I encountered problems with my Focusrite Scarlett 18i8 audio interface. These are buzzing, clicking and noise immediately or after 3 minutes or so. I tried everything, re-installed the drive

  • Title-blurry but Title 3D Crisp

    Hello again, after just returning from Macworld, I met with my client and showed the movie we're working on, and while they were overall pleased, the plain text titles were blocky and pixelated. We were watching the video off a dvd, and the metallic