Pages 5.0.1 documents are banned from transmission with gmail. Why?

First time this has happened to me with an Apple document. Pages 5.0.1 documents cannot be attached to an email using gmail. Gmail claims it is a banned document for virus worries. Can Apple please register their new Pages with those in charge so documents can be transmitted?

I used Pages 5.0.1 to export the document to "Pages '09" (format, not the software, which I no longer have) and I was then able to send it in Mail 7.1 as an attachment. Gmail did not object. Not pretty, but less of a mess than the other solutions I've seen or imagined so far.

Similar Messages

EDI documents are posted to SAP with BAPI ...How?

how is that EDI documents are posted to SAP with BAPI....is there some step by step doc to do that.....

Hi,
There are couple of EDI subsystems like Meractor from where you can fire a BAPI to post a document into our SAP system.
First the EDI subsystem receives the EDI document and from there are going to fill all the internal tables of the BAPI and call that BAPI from the EDI subsystem itself, if the BAPI is successfully executed then it will return the document number and if it fails then it will throw the error why it has failed.
If it has failed then the EDI team will look into the reason and work on it, if it is a data related then they will take care and it is a problem with the config then they are going to intimate the SAP team to make the necessary config and they will refire the BAPI again.
Thanks,
Mahesh.

Not receiving mail from people with gmail accounts

Has anyone run into a situation where they stopped receiving e-mails from contacts with gmail accounts? I seem to get mail from all other mail providers, just not gmail - sending messages to gmail contacts also doesn't seem to be working. All was fine up until about 2 weeks ago.
Any ideas?

If IMAP for your GMail is still not working correctly, then setup a new email account under Settings > Mail,.... > Add Account > Microsoft Exchange.
Then enter the following
Email: your GMail address
Domain: Leave blank
Username: your GMail address
Password: your GMail password
Description: Up to you what you enter here.
Click Next
Server: m.google.com
Click Next and now you can select what services you wish to sync with your iPod.
Mail: On
Contacts: Up to you
Calendars: Up to you.
You should have your GMail account backup and running, on your iPod.

Office365 - Word Document .docx banned from Mailer if you edit properties online. Bug ?

Hi,
I'm working on office365 (SharePoint 2013) solution with documents created on SharePoint Library.
We create new document in library with a simple custom template (in .docx format), I use a quick part in document.
I attach new document and send to customer mail, but I get "banned" result from recipient mailer cause of Dangerous attachment.. the docx file..!
Message from postmailer referres to a "0000.dat" file contained in docx that it recognized as exe file, so Dangerous.
I tested 2 behaviors:
Test 1
1) Create New Document (.docx) in SharePoint library
2) Download the new document on PC and Sent to GMAIL address
3) In Gmail arrives mail, then I forward this mail (with attached docx) to customer enterprise mail
4) I receive this mail, it work
Test 2
1) Create New Document (.docx) in SharePoint library
2) IMPORTANT: Edit Properties in browser (without open docx), i.e. change title, any property, or filename
3) then Download document on PC and Sent to GMAIL address
4) In Gmail arrives mail, then forward this mail (with attached docx) to customer enterprise mail
5) Gmail receive mail from postmaster of customer enterprise with error "banned attachment" for .dat file into file..
6) I receive no mail
I check docx from SharePoint.
I change extension of .docx file (from test 2) into .zip extension and extract these files.
In folder, I see a "[trash]" folder, with 0000.dat file..
I do the same with first file .docx (from test 1) and no "[trash]" folder into zip file.
Result: edit properties on SharePoint, change structure of file, creating folder "[trash]" and save into folder file 0000.dat.
This files is banned from postmaster and mail not received...
Can you help me?
Is it a issue/bug of office365/SP2013?
I'll try to test other scenarios (with .dot template, without quick parts, with file uploaded).
Thanks!

It is part of the OOXML specification: http://www.ecma-international.org/news/TC45_current_work/Office%20Open%20XML%20Part%201%20-%20Fundamentals_final.docx
9.1.7 Trash Items
Trash items represent parts that have been discarded or are no longer in use. Trash items shall not conform to OPC part naming guidelines as defined in Part 2 and shall not be associated with a content type. All trash items
shall follow the naming scheme: [trash]/hhhh.dat where h represents a hexadecimal value.
[Example: A package has two parts that must be updated in-place but both parts have grown beyond their growth hints. The newer updated parts are added as new ZIP items while the original parts are renamed to:
[trash]/0000.dat [trash]/0001.dat
end example]
So perfectly normal part of the specification that the spam filter needs to take into account. Now the spam filters I've dealt with (Microsoft's in O365, McAfee MailMarshal, Websense) certainly don't do this with up-to-date definitions.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

After installing ios8 my iCloud setting is stuck in the upgrading mode, and some documents are missing from my pages app.

After installing the IOS8 on my ipad2, the iCloud drive is stuck in the upgrading mide. I am also missing some documents that were in my Pages app. Can anyone help my fix this issue?

I have just encountered a similar issue and I think it might have been the same as one you are getting. Turns out, I accidentally switched from my local store to US Store (App Store gives you a pop-up offering that), and purchases are tracked separately between those, causing all your purchases to become invisible.
Go to Settings, log out of App Store, log in again, and you should receive a pop-up saying that your account is associated with a different store, offering to switch back. Now all apps are back and available for download.

Pages for iPod Touch--documents are backwards!

Is there a place I can leave feedback about Pages for iPod Touch to Apple? I've had a very bizarre bug pop up...
I've been creating docs on my iPod and then (attempting) to upload them to my computer via Dropbox. I've had a heck of a time getting docs across formats as it is... but last night, after transferring a doc in .docx format, when I accessed the file on my computer, the format ended up backwards! The "ruler" at the top of page measured right to left instead of left to right. Also, the justification was to the right instead of the left. And the weirdest thing... the punctuation marks at the end of paragraphs ended up at the beginning of the line, like this:
.The lazy brown dog chased the fox
!Crazy
?Does it make sense
It didn't matter which app I used to open the doc with on my computer, the format was still messed up. So I know it was Pages that was the problem. The only way I could fix the problem was by selecting "normal" in the preset styles in the various writing apps.
I currently don't have Pages on my computer--the computer and OS are too old for me to use it. (Mac Mini duo core with 10.6.)

You can contact Apple here. http://www.apple.com/feedback/pages_ios.html
There may be a bug update soon though!

IOS 8.0.2 pages is empty my documents are on iCloud, how do I download them to my ipad2?

TThanks

Welcome to Apple Support Communities
Use the Music app to download your songs: open it, look for the song you want to download and press the cloud icon. See -> Download past purchases - Apple Support

My iPad are synkronised from before, with my old computer.

How do I get all the apps I`ve paid for from before at the same time with synkronising my iPad with another computer? some apps were unable to download because of the settings on my computer. These missing settings or something, make it unable using the apps on this computer, but I only want them as a copy so that I can get them on my iPad also after synkronising with this new PC. I made "sikkerhetskopier", ("safety copies"), will I then have this hundered apps still even if they dont show up together with the rest of my programs in iTunes library? So that I can saftely synkronise the iPad and delete everything and then put the apps back in? Will this apps be gone forever from my pad and computer if and after I synkronise? They dont show up together with all the other programs in library....

The following was copied from this thread. This is essentially what you want to accomplish.
https://discussions.apple.com/message/11527071#11527071
Read King Penguin's advice from this thread as well. You should be in pretty good shape if you follow all of the instructions.
https://discussions.apple.com/thread/3305461
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your PC. Look at Photo Transfer App in the App store and you can search for others as well.
https://discussions.apple.com/message/13016026#13016026
This support site will help you with transferring iTunes music to your new computer.
http://support.apple.com/kb/HT4527
This site will show you all of the HP printers that are AirPrint compatible.
http://www.apple.com/ipad/features/airprint.html

Not getting all resolutions from webcam with getFormats() - why?

Hey fellow Java geeks!
I own a Philips SPC1300NC/00 which is a kick-ass webcam that can take up to 1.3 megapixel video/snapshots.
Using Owen's code from http://forum.java.sun.com/thread.jspa?forumID=28&threadID=570463 it gives you a list of all available formats from CaptureDeviceInfo.getFormats(). Doing this on the Philips camera i got (only listing the RGB formats):
320x240
160x120
176x144
352x288
640x480
And as you can see none were 1280x1024 which equals 1.3 megapixel.
So my question is, how do i select the 1280x1024 video resolution for my Philips if it's not even in the list?
Thanks for reading and sincerly,
Christoffer

Hi Christoffer,
I get the same thing on my webcams. ( cheaper eBay ones )
Not sure if it's
a) requires a USB 2 port to access the better resolutions
b) the webcam drivers aren't returning the full list of resolutions
c) jmf performance pack binary files aren't returning the full list of resolutions
d) jmf java code not returning the full list of resolutions
But as an experiment, you could try calling setFormat() with your own constructed VideoFormat, eg.
VideoFormat videoFormat =
            new RGBFormat(new Dimension(1280, 1024),
                          Format.NOT_SPECIFIED,
                          Format.byteArray,
                          frameRate,
                          24,
                          1,
                          2,
                          3);regards,
Owen

Change view in document area from CSS

I don't know how my Design document area changed from WYSIWYG
to CSS. I don't know what I did to have this happen. How do I
change it back? Thanks

> My problem is that in Design mode, it has a CSS
appearance.
What do you mean by that? What is a "css appearance" ??
Is the css in effect, styling and positioning things?
Or is it not, and all the content is hugging the left margin
in the order it
is in the code?
or do you mean something else..
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Looking for a way to re-organize pages within a PDF document....

Hello All.....
First time posting here and a new user to Acrobat X Pro so bear with me as I try too explain my issue. I receive via email, a weekly PDF report for work that contains up to 200 pages in each file. Each page is basically a "Lead" that contains, in order of importance as they relate to me; an upcoming date in time and Trustee information. When I open up this file the pages are listed in chronological order by date only and cover a time-period of about 5 days. The trustees information is randomly placed through-out the document, so pages 1, 3, 5, and 10 may be one trustee and pages 2, 4, 6, and 9 may be another trustee. Complicating matters is there are upwards of 12 trustees information spread through-out every report. So..... if the 1st 50 pages of this PDF document are for 3/6/2012, all of the trustee's information is randomly scattered through-out these 50 pages. Make sense?? Here is what I am attempting to do.....
First, I am extracting all of the pages of this report that have the SAME DATE and creating a new file. When this is done the extracted pages are then deleted out of the original file. If the original report contained information covering 4 days, at the end of this step I have 4 new files; and this is where I am getting hung up. What I was hoping to do now, is go into each file and rearrange the pages to be in order of the Trustees information. I have tried the "Advanced Search" function which will allow me to search the entire file for a trustees information, which works. I just can't figure out if there is something I can do after that. I would't even mind creating another file similiar to what I am doing above for each trustee, but unfortunately that extraction only works if the pages are in 1,2,3... chronological order. Going through and extracting each page one-at-a-time would be cumbersome and time consuming at best, so that is not an option. Does anyone have any thoughts?? And please feel free to ask me for more information. I was hoping to be able to upload a sample page of this report for you all to see, but it appears that you can't upload a PDF file... Go figure!! Thank you for your time.....
Justin

There are several ways to handle a task like this, and a custom script is certainly one of them. It looks like you are using a Mac, though, so that will limit your options somewhat. As a result, I'll stick with Acrobat's native features for a solution. I am going to assume that you have Excel, though, as it's the real key to solving this problem. Notepad can be substituted for any text editor.
My understanding is that you want to end up with a document that contains the entries for each particular Trustee, listed in chronological order. It's not clear to me what specific form your output document should take, but I'll give you enough information to solve the problem, and you can adjust from there.
First, rather than deal with the problem by date, I would do it by the Trustee's name, instead. They're already in chronological order, so no need to reinvent the wheel. Someone did that work for you! So, in the advanced search function you're already using, search for all of the Trustees at the same time with a multi-term search. You can create this in a text file that you can re-use in the future. Next, save the results to a CSV file. Open the CSV in Excel, and delete all of the extraneous content except for the "page" and "seach instance" columns, which should ultimately occupy columns A and B, starting at row 1. Next, sort the search instance column (Trustee names) either A to Z or Z to A (however you want them grouped for output), and then by page number, in asecnding order. This will leave you with a new page order from which you can extract the pages that contain your Trustee names, which will inherently be in chronological order.
Next, take the column of page numbers, copy, and paste special, transposing the data into a single row on a new worksheet in Excel. Delete the initial worksheet, then save the CSV. Finally, open the CSV file with Notepad, and you'll see that you now have a row of page numbers, separated by commas. Copy that data and paste it into the pages field of the print dialogue in Acrobat, which will allow you to print those specific pages, in that specific order, to a new PDF. If you had a page splitter script (like the kind try67 makes) or plug-in, that would be a little more efficient, but either way take you to the same place.
In the end, you'll have a subset of the pages in your original, 200 page PDF, "sorted" by Trustee, with each Trustee's data sorted chronologically. If you want to break them out by Trustee, just create a bookmark at the first page of each Trustee's data (perhaps referring back to the CSV in Excel) and split the file out by bookmark with Acrobat.
I have used similar methods to complete tasks that range from impractical to impossible in my book, "The PDF Litigation Guide." Hope that helps!
Jason Covey
PDF Litigation Solutions, LLC
http://www.pdflitigationguide.com

Documents are not visible with layoutset AppBulletinBoardExplorer

Hi experts,
I created a km navigation iview with layoutset AppBulletinBoardExplorer. I created a new networklocation on my PC to the portal repository and upload a lot of documents (becasue a multiple upload from the portal is not possible). The documents are not visible in the iview. When Is change the layout set to ConsumerExplorer the documents are visible. A reboot did not help. If the documents are saved from the portal again, they are visible. Another layoutset or to upload file by file is also not an option.
How to solve this problem? .
gr
Joeri

Hi Simon,
thanks for your reply!
1. Have you tried mass upload via explorer into one KM folder then move the documents you uploaded into another area using the standard UI?
I have moved the content via KM content option, but problem still exist.
2. Have you checked the trace files on the portal to see if there is some error being logged that is not showing in the UI, but might give you a clue as to what is going on?
In the log there is a warning: user | ACCESS.ERROR"| /KM path | node_create_child. Everyone has read permissions.
3. Have you raised an support message with SAP?
not yet
4. Have you tried using the Portal Drive rather then just windows explorer? (probably won't make a different as I think it uses webdav anyway)
With the portal drive the same issue :-(.
It's something with the layoutset in combination with upload via webdav or explore. The documents are also available with a search
gr
Joeri

How dunning area derived from sales area

Dear Guru,
When you press F1 on dunning area, you will get the following:
Dependencies
The dunning area must be noted in the line items. As long as documents are copied from preliminary work areas (billing documents), the dunning area can be derived from details such as division or sales area, if necessary.
Here i want to know any IMG setting to set dunnign area derived from sales area?
The reason is that I noticed that in BSEG table, those Sale billing document with dunning area = blank. could anybody tell me the following
1) any duning area derivation in IMG need to set, eg, dunning are derived from division/sales area
2) which table, the dunning are is noted for billing document from sales side.
Thanks,
Kick

Hiya,
One assigns the Dunning Area to the Sales Area in table TVTA.
In IMG, follow the path:
Sales & Distribution --> Basic Functions --> Account Assignment/Costing --> Assign Dunning Areas
This is again based on requirement. You normally assign Dunning Areas to the Company Code.
Hope this helps.
Cheers.

SAP Easy DMS - Link between Document Area and Document Types

Deat Friends,
Is there a transaction code or a customizing available to link the Document Area and Document Types??
For example: Document Area (DMS) is linked with Document Type (DRW)
Thank you,
Sri

Hello Chandu,
We are trying to create a documents via TCODE: CVO1N
One of the entry we need to populate is the "DOCUMENT TYPE" to create a document. If, we enter the Document Type = DRW, we are not able to see our custom Storage Category while attaching/Check-in a document.
Where as, If, we enter the Document Type = DMO, we are able to see our custom Storage Category while attaching/Check-in a document.
I see that the Document Type = DRW is linked to Document Area = DMS
Similarly, the Document Type = DMO is linked to Document Area = FILESYSTEM
My question is, Is there a transaction code or a customizing option available to link the Document Area and Document Type?
Thank you,
Sri

PR's from APO with Firmed Tick

Dear All,
PR's are coming from APO with "Firmed Tick".
I want to remove this tick.
Please help me or any workaround for this
Regards
Amey Kulkarni

any change in a requisition leads to firming of the requisition.
so it is impossible to remove the firming indicator, as this is a change, and it firms the requisitions.
Why do you need to remove it? Was there a wrong setting and this removal is just a cleansing activity?

Pages 5.0.1 documents are banned from transmission with gmail. Why?

Similar Messages

Maybe you are looking for