Pages find function

The find function in Pages has stopped working - any suggestions?

I tried deleting the Pages application and the Pages files in the library and reinstalled Pages. Now, instead of starting I get an very long error message that essentially says:
Dyld Error Message:
Library not loaded: @rpath/MobileMe.framework/Versions/A/MobileMe
Referenced from: /Library/Application Support/iWork '09/*/SFApplication.framework/Versions/A/SFApplication
Reason: image not found
And, in response to your question, I purchased the DVD.

Similar Messages

Find function cntrl-f doesn't work for long pages. frustrating

find function cntrl-f doesn't work for long pages. Works find on your competitions IE, though I strongly prefer FF.
== This happened ==
Every time Firefox opened
== Several versions of FF

Hi Cb,
I did try that and it didn't work. the site in question (though I could pick any) is midwestmafia.com and I typed in capone (which is near the end of the page)
Works well on IE, though I'd like to stick with FF.

How do I export a .dwg file so the Search/Find function can be used on it?

I have some .dwg files that my co-worker exported to PDF. It is crucial for me to have the ability to use the search or "Find" function in Reader. There are 11 different .dwg files exported into an 11 page PDF, but some of the were exported with different properties. I can search on 4 of them, but the other 7 are unsearchable. I believe my co-worker user Autodesk TrueView to export the .dwg files to PDF. So my question is what program I should use (I believe that TrueView is capable of what I am trying to do, but I'm not sure) and how should I set up the the settings before I export it to PDF. Thanks.

You need to contact Autodesk, almost no one here is likely to be familiar with what Autodesk can or cannot do.

'Find' function doesn't work on some HP documents

For some pdf doc's I downloaded from HP, if I copy some characters from the text and then paste them into the Find box, the characters show up as hieroglyphs (mostly squares) in the Find box. And then actually executing the Find using those characters doesn't work, because it can't find the very word that I copied them from! On top of that, if I manually type a word into the Find box (showing normal letters), it won't find it even though I can see it within the text on the page showing on the screen. Very strange! In documents other than these old HP documents, the Find function works fine.
I looked into the document properties (menu: File >> Properties >> Fonts) and see that there are 9 fonts that have names I have never heard of before, and those fonts say "(Embedded Subset)" after the font name and "Encoding: Custom" in the font descriptions. There were a few normal fonts listed before these for that document as well.
Anyone have any idea what is going on?
- Brad

It's hard to say without seeing the actual, source content, but given what you are describing, I would venture a guess that the source content is of too poor a quality to OCR reliably and accurately. To test this theory, after running OCR, identify a term that you can confirm is present, but that the search feature cannot identify. Then, copy and paste that term into Word or Notepad. What I expect you will note is that a "0" (zero) has been identified as an "8," and other things of that nature. OCR processing is garbage in, garbage out, so the source always has to be considered. Repeat this process across the document to see if experience similar results.
You don't describe how exactly you are transferring the microfilm "images" to PDF, so it's difficult to say if that process is at issue or could be improved. I suspect that's contributing to the problem, though.
Finally, with regard to the degraded image quality, you want to make sure you are selecting "Searchable Image (Exact)" from the OCR dialogue. ClearScan or any type of downsampling will likely cause or contribute to the type of issue you are describing. In a situation with low-quality source material, you would not want to use these other options.
Hope that helps!
Jason Covey
PDF Litigation Solutions, LLC
www.pdflitigationguide.com

The Firefox find function seems to have become CAPS or non-caps specific, so that typing a word in non-caps will not find matching words with one or more capital letter.

The find function seems to have changed in Firefox. Before, when doing a (CTRL + F) find, the search was not CAPS-specific or non-caps-specific. In other words, if I typed in "firefox" (no caps), it would find the words "firefox", Firefox", or "FIREFOX", regardless of capitalization. Now, however, the find function will only match the exact same capitalization. This totally undermines the usefulness of the function, and is a major hassle. Please fix it.
== This happened ==
A few times a week
== I noticed in in the last two or so weeks.

I am having a similar problem. The following page has the word Dangerfield in several times. My browser will get to Dang and turns pink
http://www.genuki.org.uk/big/eng/HEF/ProbateRecords/WillsD.html
Is it my Browser or is there a problem with Mozilla?
I have also noted on other Google searches the same problem. Te term is listed in the page but Ctl F will not find the term

Acrobat 9 Find Function Needs to Highlight the found text

Searching existing documents for a word using "Find" sometimes results in the word being highlighted and sometimes only the cursor is placed at the found word with no highlight. This is a problem because the cursor is very hard to locate without highlighting.
The "Find" function should insure that found text is always highlighted.
Or maybe there is a setting for this?
(Also still waiting for a default View/Page Display to "Two Up Continous" as it constantly defaults to One Page which is a waste of the wide monitors.)
Thank you.

This bug has been fixed in the Acrobat 9.4.6 update:
Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5244
Mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5238

The Find function (Ctrl+F), mis-finds the desired simple text in Acrobat Standard, but works fine in Reader

Adobe Acrobat X 10.1.13, Win 7 64bit,
The Find function (Ctrl+F), mis-finds the desired simple text.
This is not a scanned document. When I search for some word that DOES exist in the document, Acrobat will highlight text that does not match at all and which does NOT contain the word. If I select the actual word, copy and past the text, I get the selected text accurately, but when I paste the same selected text into the Find box to search for it, Acrobat still mis-finds.
HOWEVER, I can open the very same .PDF file in Acrobat Reader X and do not have the same problem - Find works correctly in Reader with the same .PDF.
What is going on?! Both Acrobat standard, and Reader report that they are up to date. Please help.

Can you try rasterizing (converting the document to tiff/bmp) and then importing those image files (tiff/bmp) back in Acrobat.
This would allow document to be re-OCRed and you will be able to search text in it. You can use lossless export/import settings to preserve the quality of ducment.
For exporting the file:
1: Go to File > Save As Other > Image > Tiff.
2: Click on Settings button in the Save As Dialog and set the file settings as ZIP for Monochrome, Grayscale and Color.
Now for importing the files back:
1: Press Ctrl + K
2: In the Preferences dialog, select Convert To PDF option in Categories.
3: Choose tiff or bmp (as per the format used while exporting) and un-check Scan Optimization and OCR.
4: Set Color and Grayscale to Zip and Monochrome to CCITT G4.
5: Save the settings.
6: Now import all the pages in Acrobat.
7: You can use Combine Files feature to merge all the image files.

Page down functionality in table control BDC-CJ02 tcode

Hi Friends,
I am doing a BDC with Table control for Tcode CJ02.
When I reach certain number of records, say 13, the page down functionality doesnt work.I tried different ways like using the BDC_OKCODE as "=P" and "=P+".Also, I tried doing a recording by pressing the down key in the table contral, in SHDB, but none of them worked.
Refered a post in SDN as well, but it doesnt hold any solution.
Do throw some light on the same to achieve page down functionality for the bdc tcode CJ02.
Thanks in advance.
Shri.

Hi,
I already posted an answer to that here Re: BDC scroll down with OK_CODE '=P+':
P+ (=P+ in the BDC) is not a universal function code, but only one which is defined in ABAP lists . So, 99% of time, it doesn't work for all others situations (like yours).
Scrolling a table control is not so easy to do. When you record a page down on a table control in SHDB, you'll get probably a /00 which corresponds to Enter. When you play the recording, it won't scroll. The issue is that "page down" is processed in 2 parts, it changes the "top line" of the table control, and executes Enter. But it's not possible to record/play the "top line" information.
The solution is that the program usually implements a function code:
either "add new line"
or "position at line"
Sometimes, the function code is hidden so you must look at inside the program (or search SAP notes, like here: [SAP note 187946 (No positioning on PRT overview in routing)|https://service.sap.com/sap/support/notes/187946 ])
And sometimes, there's no function code at all, and then you're stuck ! (or use SAP GUI scripting, but it may only work in dialog).
For CJ02, I can't tell how to scroll through BDC, but anyway, there is a BAPI (don't remember the name, search the forum, it will be easy to find it), so you should always prefer them over BDC.
Sandra

The find function is not working

When I use the Find Function [CTRL +F] the word I am looking for is not found in the body of the web page - even when I know the word is there.

Sometimes the "Match case" button on the find bar gets checked, so make sure that isn't the problem. Some pages also have multiple frames and I've noticed Firefox sometimes doesn't search in all the frames. If there's a particular site where you see this, could you post the URL?

Safari's Find Function

I can't get Safari's find function to search text-fields; does anyone know of a way to do this?

Like if you go into an edit screen page for wikipedia (say http://en.wikipedia.org/w/index.php?title=Apple&action=edit ) - and you try to use the find function to find anything within the giant text box - it won't work (this does work, however, on Camino and Firefox)

"Find " function on my Tungsten E2

When I do the "Find" function for a certain word, the first page of contacts appears containing that word= No problem. Then I click "Find More", all that appears is the same group from the first page contacts? It does not go to the second page? Or third and so on?
Can you help? Thanks . . . .
DCP
Post relates to: Tungsten E2

that's the issue with find function of E2. it can only find up to 8 items when you try find something in your device. palm recommended to use the application "intelligent find" as a workaround or replacement for this function eventhough there are other several applications of similar functions available in the web for download. you only need to research them via google. you also need to understand that you can only find trial versions of these applications so if in case you wanted to use them full time, you need to purchase it.
Post relates to: Treo 680 (Unlocked GSM)

Is Safari Find function flexible? (Search for inner strings of characters?)

I'm running 10.6.8 with Safari Version 5.1.7 (6534.57.2). I see that when you search a web page using the Safari Find function, you can only search for the beginnings of words, not for character strings within the words. Is it possible to expand the Find function's capability to search for inner strings of characters?

use command F or the edit menus to make the page search box visible - click the magnify/arrow icon at the left side of it - choose "contains" or "starts with".

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

Need help in finding the root cause the error 'Could not find function:'

Hi fokls,
In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
Here are my questions ...
1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
2. If so the error I am getting is a oracle product Bug ?
And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
4. If is a custom bug , how it os not though for some other 95 transaction ?
5. Can I expect it as Data issue ? If so what kind of data issue.
Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
Thansk to all in advance
Raghu

In the error message 'Could not find function:' after colon what function name it is giving.
'FND_FUNCTION_NOT_FOUND' is a seeded message only.
As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
Please check that.
Edited by: sarojak on Nov 12, 2010 6:16 AM

Find function no longer finds files

Does anybody know why might my Find function in Finder no longer finds files and how to fix it? It finds only a limited number of files and they have nothing to do with the search term. I have selected "Computer" as the searchable entity.

Instead of using the Find function,I use the free Find Any File app http://www.macupdate.com/app/mac/30079/find-any-file Try it.
 Cheers, Tom

Pages find function

Similar Messages

Maybe you are looking for