Pages inclduing test page print totally blank

The printer I have C7280 print pages totally blank. Even test pages print blank. There is no error message. Ink is fine. Paper tray is fine. Paper comes out fine except it is blank.

I'm having the exact problem with me HP OfficeJet 5610 All in one,
any solution for this strange problem !!
I tried every possible idea to fix this problem with no success.
any ideas would be very appriciated

Similar Messages

Form prints totally blank

Hi folks,
I form I designed in Designer 8 will not print. When I try to print it, the print preview shows a blank page and the result is, sure enough, a blank page.
I can't find any settings which seem to be causing this.
Any thoughts?
E

Hi Viraylab,
Assign a text element say it is 'TEST' to that window, and try to call the write_form with that text element.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'TEST'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
ELEMENT                        = 1
FUNCTION                       = 2
TYPE                           = 3
UNOPENED                       = 4
UNSTARTED                      = 5
WINDOW                         = 6
BAD_PAGEFORMAT_FOR_PRINT       = 7
SPOOL_ERROR                    = 8
CODEPAGE                       = 9
OTHERS                         = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Then whatever u write after this text element will get displayed on that particular window.

I can print while on line and i can print a test page. but i can not print an xl page

i can't print an xl page. test page is ok

xl page?
what size is that?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

MS Word prints only blank document

I rarely use MS Word anymore. I use Mellel - except Word (10) does such an easier job with tables.
I created a two-page table.
It prints out blank. I tried 3X, it would not print to pdf even.

This forum is for questions about the Communities themselves. Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
Good luck and regards.

Can not create template based page with customized page type.

I built a customized page type (with persepective attribute) and wanted to build pages with this type. If the new pages do not based on any template, it works fine. However, if I wanted to use a template, the page type was set back to "standard"!
Steps to reproduce it:
1. create a new page type - test page type.
2. create a new template = test template.
3. create a new page - test page.
3.1 choose the page type to be "test page type"
3.2 fill in the form including the new attribute info.
3.2 choose the page template to be 'test template"
3.3 click finish
4. click the properties of "test page", it shows that the page type is "standard" and the new attribute information is gone!
If in step 3.2, no template is chosen, the properties of the new page shows the page type is "test page type".
I tried to find a workaround.
1. create a page with "test page type".
2. covert the new page to template.
I got this error message:
Error while copying page. (WWC-44262)
(WWC-00000)
Looks like customized page type and template can not coexist. Is this a bug?

How long should the upgrade take? And should it be attempted on a production (infrastructure on machine 1/middle-tier on machine 2) Windows 2000 architecture? Or should be wait for 9.0.4? Or ... should I ask this in a TAR? Thanks!
Mike

Can not build a template based page with customized page type.

I built a customized page type (with persepective attribute) and wanted to build pages with this type. If the new pages do not based on any template, it works fine. However, if I wanted to use a template, the page type was set back to "standard"!
Steps to reproduce it:
1. create a new page type - test page type.
2. create a new template = test template.
3. create a new page - test page.
3.1 choose the page type to be "test page type"
3.2 fill in the form including the new attribute info.
3.2 choose the page template to be 'test template"
3.3 click finish
4. click the properties of "test page", it shows that the page type is "standard" and the new attribute information is gone!
If in step 3.2, no template is chosen, the properties of the new page shows the page type is "test page type".
I tried to find a workaround.
1. create a page with "test page type".
2. covert the new page to template.
I got this error message:
Error while copying page. (WWC-44262)
(WWC-00000)
Looks like customized page type and template can not coexist. Is this a bug?

How long should the upgrade take? And should it be attempted on a production (infrastructure on machine 1/middle-tier on machine 2) Windows 2000 architecture? Or should be wait for 9.0.4? Or ... should I ask this in a TAR? Thanks!
Mike

PDF forms "print" as totally blank pages

I am using a Mac running Mavericks. I have created a layout in InDesign, exported a PDF, then made form fields using Acrobat Pro XI. I then save the form using the "Enable More Tools" option so that people using Reader can save and print. The problem is that when people open, fill out and save the form using Acrobat Standard X, they cannot print the file. Pages do come out of the printer, but they are totally blank. No field data, no background form layout. Nothing. Right now, we are working around it by using the advanced > print as image setting out of Acrobat X, or by installing Reader XI. While these solutions work for our internal people, these files need to be sent outside of our company where we don't know what software will be used to fill them out. As a side note, forms originally created in Acrobat Pro X print fine. This problem has appeared after I updated to Pro XI and other users ar still on Standard X.
Has anyone else experienced this issue? Are there any solutions that can be applied to the form PDF file itself, so we don't have to deal with software compatibility issues for outside users?
Thanks to anyone who may be able to provide insight on this issue.

I am having this same issue. I used photoshop to create my form layout, exported as pdf and imported into acrobat. I have tried a variety of different things (color modes, optimizing the pdf, different save modes, etc), none of them have worked. The only way to get the form to not print blank pages is setting to print in grayscale or print as image. You can't simply download the form, fill it out and press print. This solution is not viable for external people who use these forms.
I should note I have adobe acrobat 10 and the issue of printing blank pages only occurs in adobe reader 11. All other PDF reading programs (reader 10 and below and acrobat) work fine. I never had this issue before, only recently but my process for building forms hasn't changed.

Why does printe print test page ok then shoots blank paper when trying to print from MS Office word?

Why does my printer (HP Deskjet 2050 j510) print a test page ok but when I go to print a paper I typed in MS Office Wrd it shoots out blank paper? What an I do?

Hello,
How are you connected to the printer, USB or wireless?

Printer shows OK on diagnostics but ony produces blank test pages

The screen on my Officejet J6450 All in one printer is showing two symbols [?] [?]. What does this mean. Manual is no help. Test pages come out blank.

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

HP Photosmart C4585 - can't print test pages + copies are all reduced in size

I have 2 problems with an HP Photosmart C4585 All-in-one printer.
Firstly, I cannot print test prints ie 'Network Configuration Page' and the 'Run Wireless Network Test' page. It sounds as though it's printing but it produces blank sheets.
Secondly, trying to Copy A4 originals to A4 paper the printout is always reduced in size to about a quarter of the sheet (more like photo size) - no matter which setting I select. It's also printed blue.
The printer is not connected to a computer but I successfully print A4 documents in black, from an iPad using the HP ePrint app. So it is just the copy facility which is malfunctioning.
Can anyone help? Thanks.

Hi there,
Lets eliminate software interference by downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My HP LaserJet 1018 has started printing only blank pages.

My HP LaserJet 1018 has started printing only blank pages.
Help?
Using Windows XP (Home Version)
Product # CB419A

Could be a number of issues. First could be a bad or not connecting transfer rollers which moves the toner from the drum to the paper. Only way to test is a half test by putting paper on the manual tray and printing a self test. When the back edge enters the printer, open the toner door to stop printing. Remove the toner and flip back the cover over the toner drum to see if there is any image on the drum. If image is present then it could be transfer roller issues. Use the service manual and look under engine diagnostics in the index and it will direct you to a page that shows how to perform an engine test. Do the test to see if you get a sheet of paper with lines on it. If you get lines, then the issue could be the formatter. If no lines and the shutter has been removed then I would think you are having high voltage issues. You may have to bring the printer in for service.

HP C4680 does not print test page (iMac - OS Yosemite 10.10)

Recently, my C4680 has stopped printing from my iMac. It also no longer prints a copy of a page placed on the scanner. Here's some info about what I've checked and done so far.
1. The ink supply levels are fine. I am using HP's proprietary ink.
2. I deleted C4680 from the list of printers and added it back. Adding back the printer did not indicate that a new driver was needed. (The last time I used the printer was under OSX 10.9 Mavericks)
3. Under the utilities menu, I clicked on "printhead cleaning." A blank page printed under Level 1 cleaning, but Level 2 and Level 3 cleaning each produced pages printed with text and color bars. So, the ink is working.
4. Under the utilities menu, I clicked on "Align," but it only produced a blank page.
5. Under the utilities menu, I clicked on "test page," but only got a blank page.
Why isn't my printer working? As I mentioned before, the "printhead cleaning" utility produced printed text, but I get a blank page for other tasks.
Is it a HP driver issue? Is a new driver needed for OSX Yosemite? If so, where do I find it.
Help would be greatly appreciated.

Thank you for the detailed post rileyc.
I would like to help you with the printing issue you are experiencing. I understand the issue seems to be related to the ink system or potentially the driver. The best plan of attack is to narrow down the root cause.
Can you please perform a colour copy that contains black spots too? I would like to see if the printer hardware can duplicate a page without any quality issues. Please let me know the outcome of the copy and we can go from there. Thanks
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of page

My HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of each printed page. It appears to happen in the same parts of each page printed.
- I installed new ink cartridges
- I verified that the paper I’m using is the standard inkjet paper that I always use
- In the tools section of the printer setup menu, I ran the “Clean Printhead”, “Align Printer”, and “Calibrate Linefeed” options
- In reading the printer’s manual, it seems to imply that the printheads could be the problem.
- So, I manually cleaned the printhead contacts
- When I print the self-test diagnostics page, it shows printhead health to be “Good” for both. One of them was installed in January of 2009, and the other was installed March of 2008.
- With a Q-tip, I even cleaned the clear plastic band that runs parallel to the carriage rod. (It was pretty dirty.)
Here's a scan of the printed output.
Thanks for your help!

After a 2hr phone call with tech support, here is the solution; the L7600 Series printer have a firmware update (file name: OfficejetProK7600_R2011PxN.exe) my printer was bought in 2008 thus my print head is a 2008 model, and new print heads are a 2011 modem, they don’t work right in a 2008 model this is PER the tech rep and his name was John unless you upgrade the firmware.
So I upgraded the firmware from a 2004NxN to the 2011PxN and now my printer says damaged or missing print head, I place the original print head from 2008 back in the machine and it’s fine, so I bought a 3rd print head for 2011 and it says the print head is damaged.
After another 30min or so I was told I have a bad printer and sorry the warranty is out, but the old print head works but any new print heads do not, this sounds like a HP Error firmware / hardware compatibility issue, not my issue, but HP will not repair.
HP has no fix nor will they repair the printer.

New laserjet pro cp1525 ejecting extra, blank, page at end of print request. how do you stop?

Just installed a new Laserjet Pro CP 1525nw. It wants to expel a blank sheet after every print request. How do I stop it from ejecting the blank sheety at the end of the print request.

Is this only on a certain app? What about printing a windows test page or even from notepad? If these are ok then this would suggest its the page setups in the program you ate using rather than driver / printer.
If its all apps try the reports from the printer direct, if this is ok then it's probably drivers. Remove from safe mode and download updated.

LaserWriter 630 only prints the vertical lines test page

I have resurrected a LaserWriter 630 pro that hasn't been used for a year or so, which starts up and the green ready light comes on. When I print to it, the pages come out blank. I have tried printing a simple text file, which was blank, and a one page PDF (simple text also). In the end the PDF took so long to process I cancelled it. Should it take this long?
The only ink I can get it to leave on the page is the first page of the paperclip-in-hole test page. It then prints a second page which is blank. Any ideas?
I have a copy of the Apple Printer Utility, and have printed it's font test page, which is blank also.
Any ideas?
James

Dear Grant,
Thank you for the info, I hadnt found that detail anywhere. I will try it when I get home.
I think the laserwriter is a great printer, and wouldnt swap it for a brand new one unless it caught fire!
I gave it to my mother 2 years ago who used it for a while, then bought a colour inkjet and it ended up unused for a year or so. I have just taken it back to replace a much newer but much more irritating colour laser I found at the dump. I believe the last time it was used it worked perfectly. I gave it a new set of rollers about two years ago.
I am not afraid of a bit of multimeter probing!
Thanks,
James

Pages inclduing test page print totally blank

Similar Messages

Maybe you are looking for