Pages Merging from Multiple Numbers Tables

I'm trying to merge data into a Pages document from a Numbers document.
My Numbers document has 2 tables.
When I select a location in my Pages document where I want some data from Numbers to appear, and then select the Link button in the Pages Inspector, and then select Choose, and then select Numbers Document in the "Select Mail Merge Source" window, only 1 of the 2 Tables inside Numbers is offered as a choice from which to merge data from Numbers.
What do I have to do so that in the "Select Mail Merge Source" window, both Tables appear as choices from which to pull data?
Thanks.
Neil

Here are some link that will give you information
http://discussions.apple.com/thread.jspa?messageID=10161846&#10161846
http://discussions.apple.com/thread.jspa?messageID=9788717&#9788717
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=142

Similar Messages

How do I mail merge from multiple Numbers sheets into a single Pages doc?

I am trying to mail merge in a Pages doc with more than one Numbers file as a source.
I am unable to do this, because the target fields only reference a single Numbers sheet. Fields needed from other Numbers sheets to populate my Pages doc show up as 'untargeted' and the merge attempt fails.
Can anyone help?
Thanks!

shefletch wrote:
I am trying to mail merge in a Pages doc with more than one Numbers file as a source.
I am unable to do this, because the target fields only reference a single Numbers sheet. Fields needed from other Numbers sheets to populate my Pages doc show up as 'untargeted' and the merge attempt fails.
The User Guide is clear: we may merge from ONE Numbers table.
Reorganize your datas so that they are available to the merge process from the first table of the first sheet of the used document.
External references are your friends to do that.
Yvan KOENIG (VALLAURIS, France) mercredi 9 septembre 2009 18:01:34

How to create a Pages document from a Numbers table

I need to generate a number of Pages documents, extracting entries from a Numbers table. Does anyone have an applescript to do this?
Best
Paolo ([email protected])

Your question is not very descriptive of what you are trying to do. You might get better assistance if you provided a bit more information. I think even I, as an AppleScript novice, could write an AppleScript that would "extract entries from a Numbers table" and write them to a Pages document but I'm sure you have more in mind than that simple action.

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Merging data from multiple BAPI tables

Hello,
I'm executing a BAPI_XX_GETLIST with multiple "Tables" selected with the REQUESTEDTABLESX import parameter. What is the best way to combine/merge data from multiple "Tables" and bind them into a single webdynpro UI Table?
Thanks.

Hi,
Lets say the BAPI name is BAPI_XX_GETLIST and the table names are ET_TABLE1(Field1, Field2, Field3) and ET_TABLE2 (FieldA, FieldB). You have display the fields of ET_TABLE1 (Field1, Field2, Field3) and one field from ET_TABLE2 (FieldB). "FieldA" id the key field.
Create a value node (vnField) under the model node table ET_TABLE1 with cardinality 1:1. Create a value attribute (vaFieldB). For "vnField" create a supply function (supplyfunction). If you goto the implementation you can see a method "supplyVnField(IPrivateCO_ComponentName.IVnFieldNode node, IPrivateCO_ComponentName.IET_Table1Element parentElement)".
Write the following code in the implementation.
IPrivateCO_ComponentName.IVnFieldNode nodeX = node.createValueFieldElement();
for(int i=0;i<wdContext.nodeET_Table2().size();i++){
if(parentElement.getField3Value().equals(wdContext.nodeET_Table2().getET_Table2ElementAt(i).getFieldA())){
nodeX.setValuAttributeValue(wdContext.nodeET_Table2().getET_Table2ElementAt(i).getFieldB());
node.bind(nodeX);
Hope this solves your problem.
Regards,
Santhosh.C

Creating an XML file from multiple sql tables

I have very little xml experience, but need to generate an xml file from multiple table. I know what the output needs to look like, but do not know how to setup the code. Any help would be appreciated.
- <Practice SourceID="EPIC" ExternalPracticeID="PPAWB">
- <Provider ExternalProviderID="TB2" FirstName="THOMAS G" LastName="BREWSTER">
- <Patient ExternalPatientID="99999" OldExternalPatID="" FirstName="test" MiddleName="J" LastName="test" Gender="M" DateOfBirth="2005-08-12" SocSecNumber="000-00-0000" LanguageID="22" AddressOne="test" AddressTwo="" City="test" StateID="20" ZipCode="99999" DayPhone="" EveningPhone="207-999-9999" StatusID="">
<Measure MeasureID="2" MeasureValue="5" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="2" MeasureValue="5" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="3" MeasureValue="1" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="3" MeasureValue="1" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="32" MeasureValue="3" MeasureDate="2008-10-24 13:51:00" />
<Measure MeasureID="33" MeasureValue="1" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="33" MeasureValue="1" MeasureDate="2009-02-09 10:09:00" />
<Measure MeasureID="4" MeasureValue="5" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="4" MeasureValue="5" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="40" MeasureValue="2008-10-24 13:43:00" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="40" MeasureValue="2008-10-24 14:23:00" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="41" MeasureValue="2008-10-24 13:43:00" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="41" MeasureValue="2008-10-24 13:51:00" MeasureDate="2008-10-24 13:51:00" />
</Patient>
</Provider>
</Practice>

You are interested in XMLElement and probably XMLAgg. Since you didn't list a version, I can't provide links to the corresponding documentation. I cringe at all the attributes on the Patient element as that info should really be elements.
To create the Measure node, your overall SQL statement may look something like (not tested)
SELECT XMLElement....
          XMLAgg(SELECT XMLElement
                   FROM measures_table
                  WHERE join condition to parent)
FROM patient,
       provider,
       practice
WHERE join conditionsFor additional help, please include your version (4 digits), some sample data, and what you have tried.

Create view from multiple days tables

Hi,
I'm having existing oracle db with daily stat data, tables strangely named data_mon, data_tue, data_wed.. For my batch processing I plan to use view with multiple day data, let say for last 5 days.
Not sure how better implement my sql statement, with those _mon suffixes to make it more or less dynamic.
I also never create View from multiple tables, so probably I can do something that will add fresh daily data and delete 5 days old data?
Will appreciate you comments on details and whole concept. I have prev sql server experience.
Thanks
T

user12943718 wrote:
Hi,
I'm having existing oracle db with daily stat data, tables strangely named data_mon, data_tue, data_wed.. For my batch processing I plan to use view with multiple day data, let say for last 5 days.
Not sure how better implement my sql statement, with those _mon suffixes to make it more or less dynamic.
I also never create View from multiple tables, so probably I can do something that will add fresh daily data and delete 5 days old data?
Will appreciate you comments on details and whole concept. I have prev sql server experience.
Thanks
TChange the data model so you don't have 1 table for a day.
You just have a DATA table, and a column to denote the day of applicability.
Then you don't need a view, don't need anything dynamic, don't need to smash your head against a wall for a simple query ... etc.

Create XML (using DTD) from multiple relation tables

Hello and thank you in advanced.
I'm trying to create an XML document, based on a specific DTD, by selecting information from multiple tables in the database.
Is there a tool (in XDK maybe?) that will allow me to map my relational tables to a specific DTD?
I could build the XML manually, but I was hoping that Oracle has already solved this problem with an automated tool.
Thanks again,
Sean Cloutier

Is that the same thing as me writing an XSQL document which contains all of my queries (or views).
In other words, do I have to map everything by hand or is there a tool to do that for me?
thanks again,
Sean
null

To fetch Data from multiple database tables!

How to fetch Data from fields of multiple database tables!
Give me one example!

use <b>join....</b>
c the SAPHELP docs...
FROM tabref1 [INNER] JOIN tabref2 ON cond
Effect
The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.
In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.
Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:
Table 1                      Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
    Inner Join
    |--||||||||--|
    | A | B | C | D | D | E | F | G | H |
    |--||||||||--|
    | a1 | b1 | c1 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a2 | b2 | c2 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a4 | b4 | c4 | 3 | 3 | e2 | f2 | g2 | h2 |
    |--||||||||--|
Example
Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE   LIKE SFLIGHT-FLDATE,
      CARRID LIKE SFLIGHT-CARRID,
      CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
    INTO (CARRID, CONNID, DATE)
    FROM SFLIGHT AS F INNER JOIN SPFLI AS P
           ON FCARRID = PCARRID AND
              FCONNID = PCONNID
    WHERE P~CITYFROM = 'FRANKFURT'
      AND P~CITYTO   = 'NEW YORK'
      AND F~FLDATE BETWEEN '20010910' AND '20010920'
      AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.

Is it possible to select a subset of rows from a Numbers table?

I know I can use the COUNTIF, SUMIF, AVERAGEIF functions to operate on a subset of rows in a Numbers table based on a condition. What I would like is to be able to use other functions, for example the MAX and MIN functions.
For example, give a table like this:
A
B
1
Fred
20
2
George
30
3
Fred
25
4
Bob
15
5
Bob
20
6
Fred
10
7
George
9
8
George
25
9
Fred
12
10
Bob
13
What I want could be expressed as =MAX( SELECTIF(A1:A10, "=Fred", B1:B10) )
Where the SELECTIF function would return a range containing B1,B3, B6 and B9 that could be operated on by the MAX function.

There is no single function to do what you want. Here is a way you can achive your goal:
This is a down-and -dirty solution because I am not sure how you want to use the informtion (so I kept it all in one table):
E1=IFERROR(MATCH($D$1, B, 0), "")
F1=IFERROR(VLOOKUP(E1-1,$A$2:$C$11, 3), "")
E2=IFERROR(E1+MATCH($D$1, INDIRECT("B"&E1+1&":B"&ROWS(Table 11)), 0), "")
F2=IFERROR(VLOOKUP(E2-1,$A$2:$C$11, 3), "")
select E2 and F2, then fill down
Now find the max:
D2=MAX(F)

How to calculate SUM from multiple numbers in one cell

Is it possible to calculate SUM if I want to put multiple numbers in one cell?
Many thanks in advance

you can sum cell by using the sum() function.
you can sum a row:
=sum(1:1)
will sum ALL cells in row 1
you can sum a column:
=sum(C)
will sum all cells in column C
you can sum a list of cells:
=sum(A1, C5, E76, B1:5)
will add together cells A1, C5, E76, B1, B2, B3, B4, and B5

Need an applecript to copy filtered cells from a Numbers table to another Numbers file

Hi,
I would like to be able to build a new table in an existing file based on a filtered selection.
My file covers the whole year and have many more columns but let's make a short example:
Starting table: Table 1 Sheet 1 file 1
Date
Quantity
Price
Action
Port
10/3/2014
1050
100
IN
Venice
11/3/2014
35
104
CES
Venice
16/3/2014
2045
90
IN
Barcelona
21/3/2014
545
9
CUS
Barcelona
25/3/2014
50
123
CES
Venice
28/3/2014
50
21
CUS
Rome
I would like to have on a separte file(table 1 Sheet 3 File 2) a table like this (filtered by Action: IN + CUS and Port: Venice + Barcelona)
Date
Quantity
Price
Action
Port
10/3/2014
1050
100
IN
Venice
16/3/2014
2045
90
IN
Barcelona
21/3/2014
545
9
CUS
Barcelona
Any help?

Although I would have preferred to have a script beacuse the data origin file - let's call it STORAGE - is already quite heavy and I would like to use the filtered data on a separate file - let's call it MANAGEMENT - for further analysis and integration with other data coming from other STORAGE files and from other company areas.
Hi Paolo,
Below is a script that should do what you want. (Tested in Numbers 3.2). Copy into AppleScript Editor, set up the Numbers documents as indicated (or change the script to match your document setup), and click the green triangle 'Run' button.
It assumes you have both the source document ("Storage.numbers") and target document ("Management.numbers") open and that you have already set up the target table with 1 header row. You can change your filter columns and values and filter logic where indicated.
For simplicity (and also to avoid apparent Numbers bugs in removing rows via AppleScript) I assumed the user will manually check to make sure that the target table does not contain too many rows. It needs at least 2 rows to work properly as the results are inserted starting in cell A2 (which can be changed as needed).
SG
--filters a table and passes the results to an existing table in the same or different document
--set filter column and values to filter for here:
property filter1 : {colNum:4, filterFor:{"CUS", "IN"}}
property filter2 : {colNum:5, filterFor:{"Barcelona", "Venice"}}
--set properties of source's and target's document, sheet, table here:
property source : {d:"Storage.numbers", s:"Sheet 1", t:"Table 1"}
property target : {d:"Management.numbers", s:"Sheet 1", t:"Table 1"}
tell application "Numbers"
          activate
          set filteredList to {}
           --load source table's values into a list of lists
          try
                    set valuesList to value of document (source's d as string)'s ¬
                              sheet (source's s as string)'s table (source's t as string)'s ¬
                             rows's cells
          on error
                    display dialog "Having trouble. Does your source document, sheet, and table exist?"
          end try
           --create filtered list of lists
          tell valuesList to repeat with anItem in items
                    --if needed, logic can be changed to 'not in', etc.
                    set satisfiesFilter1 to anItem's item (filter1's colNum) is in filter1's filterFor
                    set satisfiesFilter2 to anItem's item (filter2's colNum) is in filter2's filterFor
                    --if needed, logic can be changed here to 'or', etc.
                    if satisfiesFilter1 and satisfiesFilter2 then ¬
                              copy anItem's items to end of filteredList
          end repeat
          if (count filteredList) = 0 then display dialog "No rows meet your criteria" buttons "Cancel"
           --load values into target table (in this or another document, as specified in properties above)
          try
                    tell document (target's d as string)'s sheet (target's s as string)'s ¬
                              table (target's t as string)
                             --load the values into the cells starting at cell A2:
                              set pasteStr to ""
                              set {oTid, AppleScript's text item delimiters} to {AppleScript's text item delimiters, tab}
                              repeat with anItem in filteredList's items
                                        set pasteStr to (pasteStr & anItem as string) & return
                              end repeat
                              set the clipboard to pasteStr
                              set the selection range to cell "A2" --assumes 1 header row
                              tell application "System Events" to keystroke "v" using {option down, shift down, command down}
                    end tell
          on error
                    display dialog "Having trouble. Does your target (destination) document, sheet, and table exist?"
          end try
end tell
--end of script

How to select from multiple output tables in the SAP Data Source

Hi,
We're using the SAP Data Source to display SAP data in our portal from the Bapi: BAPI_INFORECORD_GETLIST. When defining the Bapi Meta Data we can select data from one of the two output tables (INFORECORD_GENERAL and INFORECORD_PURCHORG). But we want to select data from both tables (some columns we want to show are in INFORECORD_GENERAL and some are in INFORECORD_PURCHORG) .
How can we do this ?
With regards,
Ramon van der Weiden

You can query multiple TimesTen databases, but your original question was about joining tables from two databases, which is not supported.
Using Cache Connect to Oracle to query an Oracle database is not distributed. It's still one single Oracle database you are querying. You cannot join a table in the TimesTen database with a table in the Oracle database, this is not allowed.
If you are willing to share your business requiremens, we can take a look and see what solution might work for you. Would you like to discuss this offline?
Susan

Moving the data from multiple internal tables into a single one

Hello everyone,
I am creating a classical report which uses the following tables.
tables : ekko, ekpo, mara, makt,lfa1.
my input parameter is
Select-options Purchase Order number
Following fields are getting used.
Doc no                  EKKO-EBELN
Material              EKPO-MATNR
Item number          EKPO-EBELP
Quantity             EKPO-MENGE
Material Group          MARA-MATKL
Vendor                  EKKO-LIFNR
Old Material code   MARA-BISMT
Material Desc.           MAKT-MAKTX
Vendor name         LFA1-NAME1
Now i need to do the following task.
1 Select record from EKKO Using document number.
2 Select record from EKPO using EKKO record using Document no as key.
3 Find out Old Material code of each and every material from Material master.
4 Find out Material description for each and every material from MAKT.
5 Sort record on Vendor, Purchase Order number and Material.
I have defined seperate internal tables for these operation.
Once i have fetched records into these individual internal tables from the corresponding DB tables i need to move these values into a new internal tables which has all the above fields mentioned
I need to move these values into a new internal table because to display the values on the report.
Any idea for the above ? Plz help with a sample example or some relevant.
Regards,
Ranjith Nambiar

Hi
1 Select record from EKKO Using document number.
2 Select record from EKPO using EKKO record using Document no as key.
Use inner join and retrive data into one internal table.for Ex ITAB1
3 Find out Old Material code of each and every material from Material master.
Use ITAB1 with for allentries in MARA table to get the onl materil number populate in to one table.
4 Find out Material description for each and every material from MAKT.
Get the Material desc with the same manner as above,
5 Sort record on Vendor, Purchase Order number and Material.
now sort the ITAB1 as you req.
now Loop on the ITAB1.
and read above 2 tables for old matnr and matner deac and append into another table as you want.
Hope this will help.
Regards,
Hiren Patel

Loading to target table from multiple source table

Hi forum,
I have some doubts regarding selecting data by joining 2 or 3 tables and populate the target table in same schema(ora 10g).The way i need to load is first extract the data and do some some transformations(like derive new value based on existing column value ,eg: arithmetic operations) and then load data to target table in same schema...
GIve me a suggestion to do the same in best possible way..since the entire activity to be finished in 3 hrs and volume in each table is 377 million , 122 million and 120 million.
Thanks ,
Aneesh A

It is Rob who spend his freetime in answering you - not "bob".
> Can u explain me the time-lines for the mentioned volume...?
You mean "you" and not "u"? This is not a MXIT forum where IM SPEAK is the norm.
As for time-lines.. it is silly to expect anyone to give you estimated run times when the hardware platform, types of disks, o/s configuration, Oracle configuration, average loads and so on are unknown.
What Rob showed you is the most optimal way to write SQL to transform data from one or more source tables and insert these results into a destination table - using direct path inserts and parallel query. The only faster method would be a CTAS - Create Table As Select as oppose to an Insert Table with select.

Pages Merging from Multiple Numbers Tables

Similar Messages

Maybe you are looking for