Pages that are published stay "Red" and don't turn "Blue"

I had iWeb 08. Whenever I updated it would turn the pages in the sidebar from "Red" to "Blue". So whenever I made a change iWeb would know just to publish the pages that were changed. BUT NOW WITH IWEB 09... Whenever I click publish... ALL THE PAGES STAY "RED" AND DON'T TURN "BLUE"!!! So if i see a small spelling mistake it WILL PUBLISH THE WHOLE SITE THAT IS 9.0GB AND IT TAKES 6 HOURS. When the change should at tops take only 3 MINUTES!!! It is making me mad and when i need to make little changes it takes six hours to update. And keeps republishing the entire site... I even tried clicking publish entire site to see if that would change it blue and it still didn't work. PLEASE HELP ME!!!!

When you publish to a local folder, all the pages do indeed turn blue. When you relaunch the site in iWeb they are all red again.
I gave up publishing to MobileMe a long time ago and, by introducing the new and exciting but almost useless FTP, Apple seem to have noticed that others are less than satisfied with this service.
If you want anybody outside of the Mac community to see your website then you are going to have to rethink your publishing arrangements.
A 9.0 GB site is very small. If it didn't upload in 6 minutes I would be unhappy!
I publish to a local folder and optimize and upload my files to Host Excellence using the application Web Site Maestro. This application doesn't need iWeb to tell it what files have changed. It figures it out all on its own and only optimizes and uploads these.
Even a fairly simple iWeb built site will struggle to load on a PC running Internet Explorer if you don't optimize your images before loading into iWeb and optimize all the files before upload.

Similar Messages

Help! New Blog Summary Page titles are publishing in red!

Hi. All of a sudden, for no apparent reason, my new Blog titles, and the "Read more..." link on the cover/summary page, are publishing in red rather than black to the folder. The older ones still publish in black. It's doing it on two separate Blog pages. Does anyone know how to fix this? Please

Hi, thanks for your reply. I don't see anything signifying a default color in the hyperlink section of the inspector. The titles have always shown as black on the blog entry page in iweb, and in the blog summary page the titles and "Read more..." have always shown as red, with the rest of the text in the entry being black. And then all the text has always gone to black after publishing until now. As an experiment I changed the color of one of the titles to green, and it still published in red.

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

this is a perfect question for the users in the iWeb forum. https://discussions.apple.com/community/ilife/iweb. Good luck.

I've got a mid 2009 MacBook Pro. Today, I updated to Yosemite 10.10.1. I also updated Safari to 8.0.2. Now, anytime I open Safari, it immediately quits and give me an error page that says, Safari unexpectedly quit and suggest that I can click on a

I’ve got a mid 2009 MacBook Pro. Today, I updated to Yosemite 10.10.1. I also updated Safari to 8.0.2. Now, anytime I open Safari, it immediately quits and give me an error page that says, Safari unexpectedly quit and suggest that I can click on a Reopen button and restart it, but it just does it again.
I read some of the questions and responses here and went to ~/Library/Safari and threw out the webpages.db file and emptied the trash and rebooted.
No luck; same problem.
BTW: Mail works
Any ideas how to get around this?

There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry

Can't see iPhoto pics that are edited in PS and saved back to iPhoto

Photos that are edited in Photoshop and saved back into iPhoto don't show up in the iPhoto window. Only the originals show up. When I do a search, I see that they are saved in a "modified" folder inside iPhoto. How can I see them in the iPhoto window? I would like to "trash" some of them. Can I just drag them to the trash from the "modified" folder or will that foul up the iPhoto database?
Rick

Maybe this will help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full sizes
I also suggest the Maximize PSD File Compatabilty be set to Always.
In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
OT

Using hyper-links in a jsp pages that are in a Session

Hi i am trying to include a hyper-links in my jsp pages that are in a Session, however when i use the links to navigate throughout the pages i get a java.lang.NullPointerException. The Session begins after the user has been validated i.e
String cid= request.getParameter("counsellorID")
session.setAttribute("counsellorID",cid);
All the pages included within the session have a session scope=session
; and they call the attributes that have been set when the session first begins i.e
String counsID= (String) (session.getAttribute("counsellorID"));
Any advice on this problem would be most appreciated!
Many Thanks
Stephen

check if you borwser have cookies enabled

Print only pages that are checked on page one??? Hidden is possible?

Please help. I know a little about java and acrobat but not enough to do everything I want.
I am making a form that has many pages but not all the pages apply to every event. So what I want to do is put a number of check boxes near the top of the form. When I print I only want the pages that are represented by the checked boxes to print. Even better, I would like those pages not visible at all just print. For example: Page one is a form that one would fill out: name, address, phone number, etc. Near the bottom that person would check all that apply: page A, page B, etc. That’s all he would see but when printed, it prints out the form and any of the pages that are checked.
Am I asking too much?
Thank you for any and all help.

It's possible to use a script to print only certain pages, but any contiguous page ranges have to be sent as a single print job. For example, to print pages 1-5, 10-20, and the single page 50, you would have to issue 3 separate print statements.
It's possible to have non-visible pages (templates), but it's not possible to print them until they are displayed. Since Reader 11 now supports templates, it would be possible to display the selected pages in the order that you want, which would presumably be a single continous range of pages, which would then require just a single print statement, as opposed to multiple ones as described above.

HT5557 Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

To enable the form to be signed in Reader you will need to open the form in Acrobat; goto Advanced>Enable Usage Rights and then save this copy of the form for sending out to the users.
The user should then be able to edit and digitally sign the form. They can then email the signed/saved pdf as a browsed for attachment or via the email icon in the toolbar. Note - if you have created an email submit button on the form, then unless they have Acrobat they could only return an xml file.
The other way to do this however is to create a dataset by 'distributing' the form. This time the Email Return button will send back a full version of the form. During the distribution setup you will have the option to email the form directly or to save it and send it later,so you can send to users as and when or even post it to a website or intranet.
When you receive and open the returned form it will ask whether you want to add it to the predetermined dataset (or if you want to categorise the returns into geographical areas for example, you could create new additional datasets at this point). If the form is data heavy however, the dataset will become very large and unwieldy pretty quickly, but you can export the data from it (including signatures) in xml format and import this into an Excel spreadsheet.
To simplify the Excel xml import process I'd recommend you carefully structure your form in the hierarchy (LiveCycle) into the order you would want the data items to appear in your spreadsheet and switch off those data items that you will not need by setting the default binding for the irrelevant fields to "None".
Clear as mud? Hope this helps.

Good morning. I returned to live in Brazil and I need to use my iPhone4s here but that are blocked by verizon and I will would like to request the unlock of this. Does someone know how to do this?

Good morning. I returned to live in Brazil and I need to use my iPhone4s here but that are blocked by verizon and I will would like to request the unlock of this. Does someone know how to do this?

I don't have my account anymore ttipgem.....

Filter out pages that are marked with hideInNav true in the SimpleSearch

How do I create a SimpleSearch that would not return pages that are marked to be hidden in navigation?

AFAIK SimpleSearch implementation is for simple fulltext search and can't use it, you need to use either with sql or xpath
[1] //element(*, cq:Page)[jcr:content/@hideInNav = 'true']
[2] http://<host>:<port>/bin/querybuilder.json?property=jcr%3acontent%2f%40hideInNav&property.value=t rue&type=cq%3aPage

I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there. Will my iphone sync the dates that are on the phone and add them to the ical? Or will it delete everything

I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there. Will my iphone sync the dates that are on the phone and add them to the ical? Or will it delete everything

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

Books I have purchased have pages that are duplicated at the end of chapters. It also appears that as a result content has been lost

Books I have purchased have pages that are duplicated at the end of chapters. It also appears that as a result content has been lost

Have you tried deleting the book and re-downloading it ? If that downloads in the same state then try the 'report a problem' from your purchase history :http://support.apple.com/kb/HT1933

Pro X Logic why does record window stay red and pre roll?

why does record window stay red and pre roll?

Additional:
Please do not make the subject header of your post so long in future...
There is a bug in the forum software that often prevents posts to threads that have abnormally long subjects....
Keep them short and to the point and then put the full question in the body of the post..
In your case, the bug has not struck so far but it can at any time so please be aware of this issue...
Thanks!
Nigel

Pages that are published stay "Red" and don't turn "Blue"

Similar Messages

Maybe you are looking for