Pagination parameters affect breaks display parameters?!

When I change the pagination display position to 'Top - Right', then - instead of 'Default Break Formatting', the behavior is 'Report Headings on Break'.
I want the regular default. Is this a bug or is this the way the template is set up? Can I change this?
I am using Apex 2.1.00.00.39 on Oracle 10GXE Universal.
Thanks,
David

I am getting much closer. I have dropped the page and re-added it and have had some success. Here is what I have found.
I have a given page and have added it to Bounded Task Flow (BTF) 1. BTF1 has been dropped onto my application home page as a dynamic region. The table renders all (Several thousand) of my records successfully and I can scroll up and down trough them.
I have added that exact same page to BTF2. I dropped BDF2 onto my home page as a dynamic region link. When I go to that link, the table doesn't render all of the data. Rather it renders the row count matching my fetch and range sizes which is 25 in my case. What is really wierd is that the table does have a scroll bar in which I can use to scroll down. As I scroll down, it says it is going to row xxx and I can scroll all the way to the bottom in the scroll bar and it thinks it finds the last row however the table never shows more than the first 25 rows and it never moves.
Is there something that I should try different to get the table to work in BTF2?

Similar Messages

  • I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

    I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
    David.

    Paragraph breaks are good for readability. ;-)
    Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
    You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
    * Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

  • How do you have more than one parameterized Query to display "All"?

    hi,
    I am using:
    Jdeveloper 9.0.5.2
    Oracle Database 9.2.0.1
    Toplink
    Struts
    I have been able to create a parameterized query to display an html read only table.
    I populated a dropdown list with values from the database
    and the values I select will be the parameters to my read only table.
    The drop down list is on the same page as the read only table.
    I have all this working but I also need to hard code an option in the Drop down to "All"
    to represent all values of this parameter.
    I was able to trick the jsp page using two read only tables
    and displaying the one with the parameterized query when a parameter other than "All" was chosen
    and then display the other only when "All" was chosen.
    This does not seem the best way to do it.
    What if I had more than one parameter and I wanted to show "All"
    the values of one and a certain values for another.
    I would then need at least 4 read only tables.
    How do I accomplish this in an easier way?
    Thanks in advance.

    I am not exactly sure what you are asking... Are you having trouble with TopLink, or another part of your application?
    Peter Krogh

  • Exits with parameters are not displaying in CO Substitution

    Hi there...
    I am having this problem...I´ve created a CO substitution following all the steps involved, works fine when I define the parameter:
      exits-param = c_exit_param_none in form GET_EXIT_TITLES
    The transaction code OKC9 displays the exit with the field:
    parameters = "No change"
    but when I changed the parameters in my exit for use parameters:
    exits-param = c_exit_param_field
    After the activating and generating with RGUGBR00, the exit doesn´t display in exits availables in OKC9 in fact all the exits with using parameters are not displaying in OKC9.
    What am I doing wrong here?
    Thanks in advance!!!
    Alfredo
    Amber

    Calibrate your monitor.

  • BI Publisher- Display Parameters?

    How do I display parameters in a report?
    I do a
    select *
    from table_name
    where vendor_name = :parameter1
    and start_date = :parameter2
    and end_date = :parameter3
    I can display all the * but the parameters...how do I show them?

    If you go into your RTF template, you first need to declare the parameters by using:
    <?param@begin:parameter1?>
    <?param@begin:parameter2?>
    <?param@begin:parameter3?>
    etc..
    then you can reference the value of the parameter by using <?$parameter1?>

  • Change - Display Parameters (ABAP)

    Hello everyone ^^.
    Is this possible? To have the parameters initialize in display mode an when i want put in change mode? ABAP of course LOL!
    Thx in advance, regards to all

    HI,
    Yes it is possible. You can do it using AT SELECTION SCREEN OUTPUT event. Just search forum and SAP help lots of sample code and help available on the same.
    Regards,
    Atish

  • Display parameters in header

    Hi All,
    i want to display parameter in header with if else condition and nested if condition is it possible
    if yes can you please provide code for this
    and also case statement
    if possible please provide any link for coding to display parameters in header
    please help this requirement is needed for me
    thanks and regards,
    jell

    Do you have these parameter values in your data set? If that is the case, then you can simply type the code for these fields in the MS header area like <?Parameter_1?>
    Take a look at this blog: http://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
    You could use statements like this: <?xdoxslt:ifelse(.//WM_FLAG='C?,'Canceled','Approved')?>
    You can use choose statement:
    <?choose:?>
    <?when:STATUS = 'Open'?>
    <?...action?>
    <?end when?>
    <?when:STATUS='Closed'?>
    <?take action?>
    <?end when?>
    <?otherwise?>
    <?..?>
    <?end otherwise?>
    <?end choose?>
    Hope that helps.
    Bipuser

  • Pass BODS job parameters as HAVA View parameters

    Hi experts,
    I use HANA Calculation View as Data Source and need to pass BODS job's parameters into Calculation View parameters. I have tried to use SQL Transformation with code like this (see below) but it doesn't work.
    select RRCTY, RYEAR, FISCAL_PERIOD as POPER, FISCAL_YEAR_PERIOD, RBUKRS, RACCT, RCNTR, WBS, RZZPERNR, PLEVEL, ROW, MEASURE, REP_ID
         from SOURCE_1.DIM_EMPLOYEE as emp
         inner join "_SYS_BIC"."packeage/CalcView" (PLACEHOLDER."$$IP_SNAPSHOT_TIMESTAMP$$" => {$IP_SNAPSHOT_TIMESTAMP}, PLACEHOLDER."$$IP_REP_ID$$" => {$IP_REP_ID}) as mce1
         on emp.EMPLOYEE_CHAR = mce1.RZZPERNR
    How can I pass job parameters into HANA Calculation View from BODS?
    Thank you!
    With best regards,
    Sergey

    Hello
    There's nothing wrong with your theory, it will work as all Data Services is doing is constructing an SQL string as passing it to HANA.  Which version of HANA are you using?  The PLACEHOLDER syntax changed slightly, however I suspect you are missing some single quotes around your parameter values.
    Get the SQL working succesfully via the HANA Studio (or hdbsql) then reverse engineer the parameterised statement for the SQL transform.
    Michael

  • BI publisher report does not displays parameters in dashboard

    HI to all,
    I have created a report in BI publisher with Parameters and list of values and it works as expected while running it through the BI Publisher.
    I also added it into a dashboard, the dashboard displays the report correctly but it doesn't allow me to select/choose the list of values or to prompt for other values.
    I wonder now if there is something wrong with the Publisher report and/or the dashboard or maybe OBIEE does not allows to place BI publisher report with parameters inside a dashboard.
    Thanks
    Roberto

    If you embed the Bi publisher Report, you won't be able to see the parameters. Instead bring it in as a Link and then when you click on the link you should be able to see a new window pop up with parameters showing.
    Alternatively, you can create dashboard prompts and have the publisher report filtered via those prompts.
    Thanks!

  • XML Report displays Parameters instead of variable name

    I would like the actual variable name to be displayed in the XML report instead of "Parameters".  I have tried many things to make this happen with no success.  Any ideas?
    Solved!
    Go to Solution.

    Hello kwkengineer,
    What type of step are you utilizing, and which version of TestStand are you using?  I tried reproducing this behavior in TestStand 2012 with LabVIEW 2012 using a LabVIEW action step, passing a cluster of boolean arrays, and the result was the following:
    The parameters were set up as follows:
    Please let me know more details about your particular step, and I will try to reproduce the problem on my side.
    Warm Regards,
    Daniel D.
    National Instruments
    Automated Test Software R&D

  • MBP Display Parameters for Running Soloris in Parallels

    I just got Solaris installed through Parallels. Thing is, Soloris doesn't recognize any of the video parameters through Parallels. I have to go in there and put them in manually. Currently, the res is stuck at 1600x1200 which is too big for my display.
    I've tried the following with no success:
    1. login as root run: kdmconfig
    2. choose: Xsun server
    3. Select: Change Video Device/Monitor
    4. Then start selecting the type of monitor.
    : XF86-VESA Unknown Vendor Unknown Board
    : Notebook LCD XGA 48 kHz (800x600 @56Hz and 1024x768 Interlaced)
    : 15 inch
    : 1024x768 - 65536 colors @ 60Hz
    Any success stories or suggestions?

    Parallels support is at http://forums.parallels.com/. As for Solaris I guess you need to find their support site.
    These forums only provide user-to-user technical support for Apple products.

  • I want to display  parameters when i check check box

    hi,
    i want to display select options when i check check in the selection screen .
    if the check box was not checked then those parameters should not be seen.

    hi,
    check this..
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS : S_MATNR FOR MARA-MATNR.
    parameterS: check1 as checkbox user-command US1.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME title text-001.
    parameter : p_MATNR1 like MARA-MATNR modif id PRO.
    SELECTION-SCREEN END OF BLOCK B2.
    AT SELECTION-SCREEN OUTPUT.
      IF NOT check1 IS INITIAL.
        LOOP AT SCREEN.
          IF SCREEN-GROUP1 = 'PRO'.
            SCREEN-INVISIBLE = '0'.
            SCREEN-INPUT  = '1'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN.
          IF SCREEN-GROUP1 = 'PRO'.
            SCREEN-INVISIBLE = '1'.
            SCREEN-INPUT  = '0'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    regards,
    priya.
    Message was edited by:
            Priya

  • Pass parameters to WAD displayed in a BiApplicationFrame

    Hi All,
    I am working on Web Dynpro for ABAP. I am using a "BiApplicatioFrame" UI Element to display a WAD application in my view. By setting values to properties "server" and "Templateid", the WAD application is successfully getting displayed in the BiFrame.
    However I also want to pass parameters to this WAD application. I tried following methods of interface IF_WD_BI_APPLFRAME_METHOD_HNDL.
                SET_SELECTION_STATE
                EXECUTE_COMMAND
    I am able to pass the parameters using IFrame as it has a property "source" where you can pass the whole URL. "BiApplicatioFrame" does not provide any such thing.
    Thanks in Advance
    Kunal Patil

    Hi, try this.
    attribute
    BIAPPFR
    IF_WD_BI_APPLFRAME_METHOD_HNDL
    0P_BPART is variable of query
    data: lr_bi_control type ref to cl_wd_biapplication_frame,
         lr_container  type ref to cl_wd_uielement_container.
    if first_time = abap_true.
         lr_bi_control ?= view->get_element( 'BIAPPFR' ).
         wd_this->BIAPPFR ?= lr_bi_control->_method_handler.
    endif.
    DATA: lt_parameters TYPE if_wd_bi_applframe_method_hndl=>tt_name_value,
           ls_parameters TYPE if_wd_bi_applframe_method_hndl=>t_name_value.
    DEFINE add_parameter.
       clear ls_parameters.
       ls_parameters-name = &1.
       ls_parameters-value = &2.
       append ls_parameters to lt_parameters.
    END-OF-DEFINITION.
    REFRESH lt_parameters.
    add_parameter 'CMD' 'PROCESS_VARIABLES'.
    add_parameter 'SUBCMD' 'VAR_SUBMIT'.
    add_parameter 'VAR_NAME_1' '0P_BPART'. " Name of my select-option
    add_parameter 'VAR_OPERATOR_1' 'EQ'.
    add_parameter 'VAR_SIGN_1' 'I'.
    add_parameter 'VAR_VALUE_LOW_EXT_1' '0000006009'. " Value for my select-option
    * add_parameter 'VAR_OPERATOR_1' 'BT'.
    *add_parameter 'VAR_VALUE_HIGH_EXT_1' '0000006010'. " Value for my select-option
    *add_parameter 'VAR_NAME_2' '0P_BPART'. " Name of my select-option
    *add_parameter 'VAR_OPERATOR_2' 'EQ'.
    *add_parameter 'VAR_SIGN_2' 'I'.
    *add_parameter 'VAR_VALUE_LOW_EXT_2' '0000006010'. " Value for my select-option
    wd_this->BIAPPFR->execute_command( lt_parameters ).

  • Parameters should be displayed in the "MessageTextInput" item of the page.

    Hi All,
    I am entering 2 parameters in the page,then passing them through HashMap from page 1 and these parameters has to be displayed in page 2 "MessageTextInput" field.How can I achieve this? I have used OAMessageTextInputBean.the piece of code is as below:
    String empName=(String)pageContext.getParameter("employeeName");
    String empNumber=(String)pageContext.getParameter("employeeNumber");
    OAMessageTextInputBean empNameBean=(OAMessageTextInputBean)webBean.findChildRecursive("employeeName");
    OAMessageTextInputBean empNumberBean=(OAMessageTextInputBean)webBean.findChildRecursive("employeeNumber");
    empNameBean.setValue(pageContext,empName);
    empNumberBean.setValue(pageContext,empNumber);
    Pls Help me to resolve this issue.
    Thanks,
    Akshata

    This code looks fine.
    What is the problem you are facing? Is it not populating or the parameters is having NULL values?
    Niranjana

  • Parameters with no display

    Hi,
    I have designed a report  for all contracts..
    Now the client wants to schedule this report.
    When we schedule this report it should send mail to the person who created the contract when its going to expire.
    So i want a field in the screen which should not be displayed on screen but i can pass value to the variant when i create it.
    So  can i have a parameter field with no display and in the variant pass a value to this paramater.
    And will schedule this report with this variant.

    hi swathi,
    try this code for selection screen designing and in event at selection-screen output pass the value of user name to which you want to display those parameter and for other user these field will not display......
    tables : mara,aufm,somlreci1.      
    SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: p_bukrs LIKE aufk-bukrs  OBLIGATORY.
    SELECT-OPTIONS: s_matkl FOR mara-matkl.   "Mat Group
    SELECT-OPTIONS : s_werks FOR aufm-werks OBLIGATORY NO INTERVALS.    
    PARAMETERS: p_werks LIKE aufm-werks MODIF ID ab, 
                p_budat LIKE aufm-budat.
    SELECTION-SCREEN: END   OF BLOCK b1.
    SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    SELECT-OPTIONS : s_email FOR somlreci1-receiver MODIF ID ee.
    SELECTION-SCREEN: END OF BLOCK b2.
    AT SELECTION-SCREEN OUTPUT.
      IF sy-uname NE '<username>'.
        LOOP AT SCREEN.
          IF screen-group1 = 'EE' OR screen-group1 = 'AB'.          
            screen-active = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    Regards
    Gagan

Maybe you are looking for