BI Publisher- Display Parameters?

How do I display parameters in a report?
I do a
select *
from table_name
where vendor_name = :parameter1
and start_date = :parameter2
and end_date = :parameter3
I can display all the * but the parameters...how do I show them?

If you go into your RTF template, you first need to declare the parameters by using:
<?param@begin:parameter1?>
<?param@begin:parameter2?>
<?param@begin:parameter3?>
etc..
then you can reference the value of the parameter by using <?$parameter1?>

Similar Messages

BI publisher report does not displays parameters in dashboard

HI to all,
I have created a report in BI publisher with Parameters and list of values and it works as expected while running it through the BI Publisher.
I also added it into a dashboard, the dashboard displays the report correctly but it doesn't allow me to select/choose the list of values or to prompt for other values.
I wonder now if there is something wrong with the Publisher report and/or the dashboard or maybe OBIEE does not allows to place BI publisher report with parameters inside a dashboard.
Thanks
Roberto

If you embed the Bi publisher Report, you won't be able to see the parameters. Instead bring it in as a Link and then when you click on the link you should be able to see a new window pop up with parameters showing.
Alternatively, you can create dashboard prompts and have the publisher report filtered via those prompts.
Thanks!

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

3201: The publisher display name FooBar, specified in the package doesn't match the publisher name, FooBar

I've updated a WP 8.0 application to WP 8.1 Silverlight. When I try to deploy a demo application I get the following error;
3201: The publisher display name, FooBar, specified in the package doesn’t match the publisher name,
FooBar, that’s associated with the developer account.
I've seen several cases with people encounter this issue and then solved by modifying WPAppManifest or the Packages file. My problem is that the
display name and publisher name is exactly the same. Both in the application xml files and in the error message displayed by windows phone store.
Any suggestions?

There is no requirement that source code files are in the correct directory structure. If you want javac to be able to automatically compile dependent files, then the source code must be in an appropriate structure and find-able from the classpath.
Also, when you use the -d option, javac will create an appropriate directory relative to the directory specified in the -d option. That's how it is supposed to work.
So it is working as designed and specified.

Display parameters in header

Hi All,
i want to display parameter in header with if else condition and nested if condition is it possible
if yes can you please provide code for this
and also case statement
if possible please provide any link for coding to display parameters in header
please help this requirement is needed for me
thanks and regards,
jell

Do you have these parameter values in your data set? If that is the case, then you can simply type the code for these fields in the MS header area like <?Parameter_1?>
Take a look at this blog: http://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
You could use statements like this: <?xdoxslt:ifelse(.//WM_FLAG='C?,'Canceled','Approved')?>
You can use choose statement:
<?choose:?>
<?when:STATUS = 'Open'?>
<?...action?>
<?end when?>
<?when:STATUS='Closed'?>
<?take action?>
<?end when?>
<?otherwise?>
<?..?>
<?end otherwise?>
<?end choose?>
Hope that helps.
Bipuser

Can I publish keyframed parameters in an FCP generator?

Hi
I'm making an FCP generator in Motion and have a layer which moves from (0,0) to (x,y) and then goes back to (0,0).
What I would like to do is publish the (x,y) position so that I can change this in FCP. I have currently keyframed the animation with a dummy value for (x,y), but when I try to publish this it works fine in the Project Publishing pane (with values and keyframes) but when I bring it into my FCP timeline I have no keyframes and a zero value.
I can go in and manually add keyframes to my position parameter, but that rather spoils the whole benefit of doing it as a template. If the keyframes carried over it would be a start. If I could isolate the (x,y) keyframe and just allow that to be changed while maintaining the (0,0) that would be awesome.
If you cannot do this is it a bug which may at some point be fixed, or is it not meant to do this? The fact that the keyframes are there in the Project Publishing pane makes me think that they should export to FCP.
Would this work if I set up a rig? Can I specify values at certain points in time and then use a slider or similar to specify where the position value will go at my mid-keyframe? I haven't used rigs before but am happy to learn how to use them if they can do what I want.
My other thought (although I think this will become an inelegant solution) was that I could use a ramp to behaviour on x-position and one on y-position, and publish these values with ramps back to (0,0). At this point that doesn't seem too complicated, but I actually have a number of layers doing a number of things [and sometimes starting at (x,y) and moving to (0,0) and then back to (x,y)] so would have quite a lot of ramp values published which would become confusing, if this would work at all.
Perhaps I would have to use a rig to combine some of these if this is my only option?
Sorry if I'm at all vague. I know very clearly what I want to do and sometimes get befuddled explaining, but if I can publish keyframed position parameters (or preferably just the mid-point) I know that would solve it quite easily.
I'll keep experimenting and update with how I get on, but any help would be greatly appreciated.
Cheers

Sorry, my mistake. I forgot to mention that this is an image movement for a slideshow and will be repeated (with the variable (x,y) values) multiple times in the timeline.
Yes, if it was a single instance then keyframing in FCP would be fine. For the thirty or so occasions I will need to keyframe it makes more sense to automate if possible.
I tried rigs but the same thing happens.
Then I managed to make something work whereby I keyframed the rig to go from 0 to 100 to 0 and set the corresponding x positions as 0 and 100. Publishing this makes the layer move to (0,100) and back to (0,0) when the slider is set at 100 and lowering the slider lowers the x position reached.
This only works in one direction (can't move left and right) so isn't ideal.
Then I changed the keyframed animation to two ramps on the x position and it's actually more elegant than I thought. One ramp goes from 0 to x and stops with an end offset. Then the second ramp kicks straight in taking it from 0 to -x. Set up a rig with a slider connected to both ramps end values, one directly connected and one inversely connected. Hey presto, one slider connecting to a variable move in the x direction that also accepts negative values (I played with the max and min values of the slider).
I just need to do the same for y position. This should also work where I start at (x,y) as I will just connect to the start value and tweak the start offset to time my move.
Hope that makes sense. If anybody wants to do something similar and needs further explanation please ask. This is truly amazing. I can set up a zoom in to start and end anywhere on screen (i.e. zoom top left corner into middle of screen) and control where we zoom from within FCP... or control other parameters in a similar way.

XML Report displays Parameters instead of variable name

I would like the actual variable name to be displayed in the XML report instead of "Parameters". I have tried many things to make this happen with no success. Any ideas?
Solved!
Go to Solution.

Hello kwkengineer,
What type of step are you utilizing, and which version of TestStand are you using? I tried reproducing this behavior in TestStand 2012 with LabVIEW 2012 using a LabVIEW action step, passing a cluster of boolean arrays, and the result was the following:
The parameters were set up as follows:
Please let me know more details about your particular step, and I will try to reproduce the problem on my side.
Warm Regards,
Daniel D.
National Instruments
Automated Test Software R&D

MBP Display Parameters for Running Soloris in Parallels

I just got Solaris installed through Parallels. Thing is, Soloris doesn't recognize any of the video parameters through Parallels. I have to go in there and put them in manually. Currently, the res is stuck at 1600x1200 which is too big for my display.
I've tried the following with no success:
1. login as root run: kdmconfig
2. choose: Xsun server
3. Select: Change Video Device/Monitor
4. Then start selecting the type of monitor.
: XF86-VESA Unknown Vendor Unknown Board
: Notebook LCD XGA 48 kHz (800x600 @56Hz and 1024x768 Interlaced)
: 15 inch
: 1024x768 - 65536 colors @ 60Hz
Any success stories or suggestions?

Parallels support is at http://forums.parallels.com/. As for Solaris I guess you need to find their support site.
These forums only provide user-to-user technical support for Apple products.

Overlapping of records on bi publisher display on IE8

Hi All,
I am having a problem for Overlapping for records for BI publisher(obiee 11.1.1.5.0) report display in IE 8 . The report display looks good on firefox and chrome browser. Even, when I open display of report from RTF file on IE , there is no overlapping of records. Is there missing add on or need to update flash player on IE? Most of the clients are using IE for reporting.
Thanks,
Vishal

Great!! After putting the fields inside the table, there is no overlapping.
Thanks a lot!!

Change - Display Parameters (ABAP)

Hello everyone ^^.
Is this possible? To have the parameters initialize in display mode an when i want put in change mode? ABAP of course LOL!
Thx in advance, regards to all

HI,
Yes it is possible. You can do it using AT SELECTION SCREEN OUTPUT event. Just search forum and SAP help lots of sample code and help available on the same.
Regards,
Atish

RoboHelp 9 - Initial published display

I'm pretty new to RoboHelp used it many years ago, When I publish as FlashHelp and click View Result the item displayed is the 3rd item down in my TOC instead of the first item. How do I publish and have the first topic display?

Hi there
You need to configure the default topic.
In your Single Source Layout recipe properties, expand Content Categories and click the category you have there. Then click the Select button to browse to and choose the default topic.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

I want to display parameters when i check check box

hi,
i want to display select options when i check check in the selection screen .
if the check box was not checked then those parameters should not be seen.

hi,
check this..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR.
parameterS: check1 as checkbox user-command US1.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME title text-001.
parameter : p_MATNR1 like MARA-MATNR modif id PRO.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN OUTPUT.
IF NOT check1 IS INITIAL.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'PRO'.
        SCREEN-INVISIBLE = '0'.
        SCREEN-INPUT = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'PRO'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
regards,
priya.
Message was edited by:
        Priya

OBI Publisher display user role

Hello,
I have googled for a few hours but cant find a global variable to display the user group(s) on the OBI Publisher report.
Is that possible without setting up a session variable in the repository (because right now we use OBI without the BI Server repository). If it does not work, how
do I access a OBI Repository session variable in OBI Publisher? From somewhere I need to get the runtime session user groups.
Thanks

The LDAP is configured correctly now. I created a BIConsumer_new catalog group in the presentation services admin console. I can use that
console to set the permissions for the BI publisher report (somehow it does not work when I try to set the permissions using the bi publisher admin page - the permissions window does not open).
the question is still out there. how can I query with that catalog group OR ldap group in the BI Publisher data model?

Displaying parameterized reports in sharepoint 2013

hello experts...
i have parameterized reports in ssrs 2008 r2 and i want to deploy it on sharepoint 2013...how can i deployed it?
i have deployed the un-paremeterized reports on sp 2013.

The approach is same. All parameters displays normally like in SSRS report viewer.
I understand you are doing integration in traditional way with SharePoint.
Bala

Publishing text parameters

So I am creating a generator with (3) boxes of text. I published the generator and all of the text parameters. In FCPX when I select and change a text parameter, it also changes the other two text parameters. "Course I don't want that. What step did I miss? I will appreciate your thoughts. Thanks!

Revert to Saved lets you reopen your last saved version and erase all changes you have made since the last time you saved. It is very useful if you're experimenting and the experiment failed
Save as Template (actually: Publish Template) allows you to save your project as a Final Cut Pro generator if you created a New "Motion Project" from the startup dialog.
You can use a Motion Project to create a Final Cut Generator, or you can start a new Final Cut Generator from the beginning. They are *exactly* the same kind of project. The only difference is that the Final Cut Generator will be saved in a location specific for use in Final Cut, whereas a "plain" Motion Project can be saved anywhere on your system. The "other types" (Effects, Titles, and Transitions) will also be saved automatically in their respective locations required by Final Cut. The convenience is: you don't have to always find the appropriate path for yourself, Motion handles it.
Motion has other startup project types: Effects, which should be picked if you plan to alter the storyline images is some way (colorizing effects, for example); Titles, which should be picked if you are dealing with editable text for the storyline (your project could be developed as a Title effect); and Transitions, which should be chosen if creating an effect that moves from one scene to another. What sets these three other types of project apart from a regular project or a generator is that you get "placeholders" that represent what is in the Final Cut Storyline when used as a template in that app. The applied placeholder (which looks like a Drop Zone, but is actually a different type of entity) is an interactive object with whatever else you develop. One difference between a Title and a Generator that uses text is: A Light object can actually cast light and shadows on the Title placeholder (the storyline in FCPX) whereas the use of a Light in a generator will have absolutely no effect on the storyline media — it will only affect the other objects in the generator (if applicable).
Don't be afraid to develop in these other types even if you are just starting out. (You can do whatever you like to the placeholders, just don't plug in any media -- they are meant to be filled with the storyline media in FCPX.) Picking the right type will make your development projects a lot more easy.

BI Publisher- Display Parameters?

Similar Messages

Maybe you are looking for