Palm Centro ringtone question

I recently loaded some AAC ringtones on my Centro. I can set them as general defaults and have successfully set any of them as a "contacts" ringtone for my home number. I tried to set one of them up for my wife's mobile number under "contacts" and for some reason it will not play the ringtone that I have selected for it (neither the new ringtones or the existing ringtones). The phone will only use the "known caller" tone for her mobile number.
Any ideas on what is going one with this one?
Any help is appreciated.
Andy
Post relates to: Centro (Sprint)

Ok, try a 10 second soft reset by taking out the battery for at least 10 seconds. This allows the device to power off completely.
If that doesn't work, Try a hard reset. The hard reset will erase all data and get the Centro back to factory defaults so sync the Centro before the hard reset. If you are assigning the ringtones according to the manual and they don't work properly, then start over with the device.
Click on the link below for the hard reset procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
Here is a link for the support page for your Centro. There is a link to the user manual on that page.
http://www.palm.com/us/support/centro/centro_sprint/
Post relates to: Palm i705
Message Edited by cygnusX1 on 08-21-2008 07:08 PM

Similar Messages

  • Verizon Palm Centro ringtone issues

    I have A Verizon Wireless Palm Centro and I have some songs on Ptunes I want to use as ringtones. I'm not getting a card anytime soon so can someone just please find a FREE software for me that will turn the songs either on my computer to MIDI files or whaterever will work with my phone. thnx!
    Post relates to: Centro (Verizon)

    Songs can easily "DL" right to your phone from your computer.  It's all explained clearly in the User Guide that ships with every device (on the Installation Disk in pdf format), and is also available online at Palm.com.:
    First Open Pocket Tunes on your phone, then Windows Media Player.  When both programs are up and running, plug in your HotSync cable, but do not press the button to Hotsync!
    Windows: Open Windows Media
    Player on your computer. On the Sync
    tab, select Set Up Sync. Select Finish.
    In the Sync tab, select the files and
    playlists you want to sync manually.
    Select Start Sync. The files are
    transferred to your smartphone.
    This will send the whole library to your card.  There is an option to "Not Sync Automatically" that will then just open the library window in Windows Media Player on the right pane.  You can then drag and drop any songs you want on the card into this window.  When the songs are in the window that you want, then press the "Start Sync" button below the list in Windows Media Player.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Palm Centro Ringtones

    Hi everyone
    Was wondering if anyone could help. I just purchased the new Palm Centro from Sprint. My friend told me about a site where you can download ringtones for free and send it to your phone. The ringtone is on my phone but i'm unable to set it as one. Can anyone help?
    I appreciate it
    Post relates to: Centro (Sprint)

    Take a look at this link http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=45124
    Post relates to: Treo 800w (Sprint)

  • Palm Centro... Ringtones.. HELP PLEASE!

    okay soOoOo... ughhmm okay so i have a question...
    so i know u can set certain ringtones for certain  people when they call....
    but can u have a certain ringtone for a certain person when they text you? because i know when u go
    to your contacts and choose a ringtone for that person that ringtone will ring when that person calls you
    but what if i wanted that same ringtones 4 when they text u? cause on my palm centro i would set a certain ringtone for
    a person and itll ring that tone if they call me but it WONT ring that tone when the person texts me.. it goes to my defualt..
    how do i do that exactly??? and is there even a way for me 2 do that on a centro? bc i know people can do it on a razor soo im guess if they can do it on that... i could do it on a "smartphone" ... i just dont know how... any help? please?
    Post relates to: Palm m500

    The built in applications on the device can't do what you are wanting, but with the vast many of third party software applications that are available for the palm os, I'm sure there is a program that will. I believe this program will
    http://software.brighthand.com/product.asp?id=2000&n=LightWav---MP3-Ringtone%2BCallerID-Manager
    I however don't use it and you may want to double check with the vendor of the software, but it does say on the specs
    Set custom MP3 ringtones for sms and voicemail notifications
    Now that could mean two things to me, One it could mean you can set a custom mp3 ringtone for all sms messages, or you can set custom mp3 ringtones for individual ringtones.
    I'd also suggest taking a look at mring it also seems to do what you are looking for
    http://store.handmark.com/p/1378/mRing_for_Palm_OS?src=sc
    Post relates to: Centro (Sprint)

  • How to charge your Palm Centro via 64-bit Windows, with a USB cable

    Here is a way to recharge your Palm Centro on your 64-bit Windows computer, through a USB cable.  But first, a few brief explanatory notes...
    Note 1:  I have successfully used this method to charge my Palm Centro from my 64-bit Windows 7 computer.  This method probably works for other Palm devices and other 64-bit Windows versions (XP and Vist)...  but I haven't tested this on any other configurations.  Others may feel free to post their successes or failures with their setups.
    Note 2:  This method will NOT allow you to HotSync your Palm to the computer via USB.  All it does is let you charge your Palm via USB.  If you need to HotSync your Palm, and you have 64-bit Windows, you have to use Bluetooth or some other method.  To learn how to use Bluetooth to sync, search for "bluetooth sync 64-bit" or something like that on this forum.
    Note 3:  If you're wondering why someone would need to use this method - why not just plug the phone into a wall outlet, right? - it's because the Centro's charging jack can get messed up.  Mine has not worked properly for the last several months
    Note 4:  I will not be posting any follow-ups to this message.  This is my first (and only) post here...  I'm posting here because I am very grateful to this forum: It is here that I learned how (and why) to sync my Centro to my computer via Bluetooth, because Palm doesn't support 64-bit Windows. This is my way of saying "thank you"!  I'm not trying to be harsh by not following up...  it's just that I won't be checking this thread, and I don't want anyone to have bad feelings if they ask questions and I don't respond.  I'll be as thorough as I can in this one posting, though. 
    Note 5:  I cannot claim credit for actually discovering this solution.  I found it after HOURS of looking online... it was on some obscure website.  Unfortunately, I can't remember where I found the original solution, so I can't credit the discoverer here.  However, I have done my best to provide much more detailed instructions here.
    Note 6:  Lastly, Palm should support 64-bit Windows.  Period.  Some of you may say, "It's not Palm's fault - the company that makes the Palm OS is Access, and it's Access's fault for not supporting 64-bit Windows."  Well, this may be true, but Access has stated that Palm has not requested a 64-bit driver.  (In fact, you can call Access and ask them directly.)  And if Palm doesn't ask (and pay) for it, Access sure isn't going to create one on its own.  I used to LOVE Palm devices...  I've used Palms for 12 years now, and for most of that time, I heartily recommended Palms to all my friends.  But, between this problem and the other problems I've had with my current Centro and my previous Treo, I'm done with Palm.  No more for me.
    OK, here's how to charge your Palm (finally!)
    1)  If you haven't done so already, install the latest version of Palm Desktop / HotSync on your computer.  You can get this at palm.com, under the "support" section.  (Actually, I'm not sure if this is necessary, but I already had done this.)
    2)  As you're installing the software on your computer, toward the end of the process, do not actually sync your Palm to your computer.  Just cancel or whatever you have to do to avoid that step.  (Remember, the whole point here is that Palm does not have a driver compatible with 64-bit Windows, so you won't be able to sync via USB.)
    3)  If you don't already have it, get the PocketTunes application (also known as "pTunes") on your Palm device.  If you have to install the software, you may need to do so wirelessly or via a 32-bit Windows computer (because, again, Palm doesn't support 64-bit Windows).
    4)  Connect the Palm USB cable to your computer.  If you are using a desktop, plug into the USB ports on the BACK of your computer.  These ports are directly powered, whereas the ports on the front of your desktop may not be.  You'll want as much juice as possible to charge your Palm.
    5)  Connect the Palm USB cable to your Palm.
    6)  Turn on the Palm device, and open the PocketTunes application on your Palm.
    7)  PocketTunes will try to connect to Windows Media Player (on your desktop).  Tell your desktop to connect to Windows Media Player.  (You can save time by telling your desktop to do this automatically.)  When PocketTunes connects with Windows Media Player, you'll have a power connection via USB.
    8)  PocketTunes will eventually show that it is "Idle" on the Palm.
    9)  To confirm whether the Palm is charging, look for the charging light (on the Centro, it's on the upper left) to turn solid red.  You can also hit the home button on the Palm to see the battery / charging status.  To get the charging working, you may have to exit PocketTunes and come back into it a few times before the charging light comes on.  I have no idea why you have to do this; I just know what I wind up doing sometimes.  You don't have to unplug and replug the phone from the USB cable, or turn the phone off and on.  Just leave PocketTunes and come back to PocketTunes.
    10)  If you exit the PocketTunes application on the Palm, the Palm will still charge - but you'll get the constant and annoying "no driver" noise from Windows.  To avoid that sound, just keep the Palm on PocketTunes while you have the Palm plugged into the USB cable.
    11)  You can close Windows Media Player on the desktop once you have the Palm charging.
    12)  Once you have this set up properly, you can speed up the process by setting the HotSync cable button to PocketTunes - after all, that button no longer needs to be set up to HotSync via USB cable.
    When you have everything set up, here's what you would be doing on a regular basis:
    -- Plug USB cable (which is already plugged into your computer) into Palm
    -- Hit HotSync button on cable --> This starts PocketTunes --> PocketTunes automatically opens Windows Media Player on the computer
    -- See if charging light turns solid red --> If not, exit PocketTunes, then hit HotSync button on cable to start PocketTunes again
    -- Repeat until charging light turns solid red (success!)
    -- Once the Palm is charging, close Windows Media Player on desktop
    Best of luck to all who need this!
    Post relates to: Centro (Verizon)

    Why do you want to create your own driver instead of what comes with the device? If you go that route, you need all of the low level USB RAW protocol from the vendor. Did you get that? Yoe are wasting your time if you don't have that. Is the driver from the vendor documented? If it's a USB connection, how does that connection show up in windows device manager?

  • Windows Vista won't install device driver for Palm Centro

    My Windows Vista PC can't seem to find the device driver info to install my new Palm Centro.  I've downloaded the latest version of Palm software.  Any ideas?  Thanks!
    Post relates to: Centro (AT&T)
    This question was solved.
    View Solution.

    ch96hh wrote:
    I am having the same problem - my computer can't find the device driver (Windows Vista) but I DO have bluetooth installed and visible.  Can you help?!  I am really not very good with technical things, but I've done a tone of research and haven't been able to solve the problem.
    Thanks in advance!
    Post relates to: Centro (AT&T)
    Read through the several large threads at the top of this section concerning syncing with Vista64...
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Palm Centro / Windows Vista 64bit

    Has anyone figured out how to sync music to a Palm Centro using Windows Vista 64bit?  My understanding is that there is not a USB driver for Vista 64.  I can already HotSync my Centro using Bluetooth, that works (albeit slow) but can't sync music and as anyone with a Centro knows, removing the memory cards is inconvenient.
    Post relates to: Centro (Verizon)
    This question was solved.
    View Solution.

    Even if there was a way to sync music files to your Centro from a Vista desktop, music files tend to be large and take a long time to sync.  The best way to put music files onto your card with any operating system is by dragging & dropping onto the /audio folder on your card with a card reader.  Removal of the micro SD card from the Centro isn't all *that* inconvenient.  Not like you need to do it very often.
    Post relates to: Centro (AT&T)
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Can't sync Palm Centro and Outlook 2007/Windows 7 - please help!

    Hello,
    I've never posted on a forum, but I'm at my wits end...!  I've been trying to get my Palm Centro to sync Contacts/Calendar/Memos to Outlook 2007 on my new laptop for a week now with no success.  It used to sync just fine to my old computer with Windows XP and Outlook 2003.  Then that computer crashed (my Outlook files were backed up on an external harddrive).  I received my new computer with Windows 7 XP (32-bit) and Outlook 2007.  I've downloaded the Palm Desktop 6.2, Windows 2007 Conduit, and Software Update 1.03 (Windows installer) for Centro for Verizon. 
    When I sync my phone to my new Outlook, it completes all 12 steps, but does not load Contacts/Calendar/Memos to Outlook.  This is a list of the error messages:
       HotSync session started on 04/14/10 12:11:25, and completed in 100.0 seconds
     Outlook Calendar synchronization completed with messages
     Duration: 5.4 seconds
     Outlook Calendar
     Please set the option "Enable Synchronization when Outlook is offline" in UI inorder to synchronize in Offline mode
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Contacts synchronized successfully
     Duration: 0.0 seconds
     Outlook Contacts
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Tasks synchronized successfully
     Duration: 0.0 seconds
     Outlook Tasks
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Notes synchronized successfully
     Duration: 0.0 seconds
     Outlook Notes
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Media synchronized successfully Duration: 3.8 seconds
     Backed up some files successfully to Backup Folder 
     Duration: 90.0 seconds
     Backed up 9 file(s) successfully
     AddressingLibRecent-HsCh
     AddressingLibRecent-HsCi
     Messages Database
     PhoneCallDB
     Cookie Data
     AddressCompaniesDB
     psysLaunchDB
     Saved Preferences
     AddressTitlesDB
     Failed to backup 1 file(s) PmTraceDatabase Protocol Error: Handheld file could not be opened. (4004) SYNCERR_FILE_NOT_OPEN
    Can someone please help me transfer Contacts/Calendar/Memos from my Palm Centro to my computer's Outlook 2007?
    I've ready about 3rd party software in posts (Pocket Mirror), but I don't know if it applies here because the Contact/Calendar/Memo information is in my Centro - not in Outlook.  I need to get it from my Centro to Outlook 2007. 
    Any help is greatly appreciated!  Thank you!

    hat wrote:
    I have a Pre Plus and am using CompanionLink software.  If the Centro is like the Plus (which I believe it is) it will not sync with Outlook.  Here is a link to Companion Link:
    http://www.companionlink.com/index.html
    I have been using this and it works great.  On their site you can choose the phone and the particular program you need to sync with and choose which you way you want to sync.
    Hope this helps
    Sorry hat, the Centro has absolutely nothing in common with a webOS device!  It runs PalmOS.  Nice of you to reply with your suggestion though! 
    @SyncHelpPlease:  OLERR errors are covered in this Palm KB article:
    http://kb.palm.com/wps/portal/kb/common/article/31167_en.html
    Something I noticed in your post - you installed Palm 6.2.2 AND the 2007 conduit.  Palm Desktop 6.2.2. has the 2007 conduits built into it already, and the patch is not needed.  Whether this is the cause of your problems, I'm not sure, but I've fielded several posts of the same issue where the user did the same thing you did!
    I'd suggest doing a clean uninstall, and reinstall of Palm Desktop 6.2.2 only. 
    I admit, I do not use Outlook, nor Win7, so I'm giving you my best guess at a way to solve your problem.  Hopefully, this may lead to a solution! 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Setting up Bluetooth HotSync - Palm Centro, Windows 7, 64 bit

    A couple of days ago I posted on here trying to figure out how to HotSync my Palm Centro with my new computer that has Windows 7 (64 bit).  I followed the instructions - had to go and buy a Bluetooth Adapter for the computer - and went through the instructions from the sticky that was pointed out to me in my original question.  I'm to the point where I'm trying to set up the phone to do a Bluetooth HotSync but when it's searching for computers it doesn't find any...
    HELP!!!!! What do I need to do now.  It may take me a couple of days to get back if anyone answers this quickly because I have a very hectic weekend but any and all advice is appreciated.  Thanks.

    Thanks for sharing your solution andygc! 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Connecting Palm centro to the internet

    hi,
    how can i connect my palm centro with internet(wi-fi)?
    is there any vpn that i can download for centro?
    thank you.
    Post relates to: Centro (AT&T)

    skillazweb2121 wrote:
    hello, im a new comer... im trying to access the internet on my unlocked palm but it keeps telling me that the micro sd card is locked. how do i fix this problem?
    Post relates to: Centro (Unlocked GSM)
    What has a card got to do with accessing the net from your phone?  Remove it, and see if the error goes away.  You do have a Data account with your provider, correct?
    Certainly you aren't trying to use a Wifi card in a PalmOS Centro, right?    As mentioned above, if there are no Palm drivers, none will work.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • VZW palm centro w/ out data plan and want to get data

    hey all. i have a palm centro wich i love, but i want to know if i can connect to evdo rev a for free  at all, i know its wierd that i got it without a data plan, but i want to get data
    Post relates to: Centro (Verizon)

    craby1950 wrote:
    hey all. i have a palm centro wich i love, but i want to know if i can connect to evdo rev a for free  at all, i know its wierd that i got it without a data plan, but i want to get data
    Post relates to: Centro (Verizon)
    Unless you can figure out a way to distract Verizon's service from detecting you have not "paid to play", the answer is No.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • How Text Messages Are Stored on Palm Centro and possible recovery

    I come from an extensive IT and programming background with emphasise on databases.  I need some high level understanding of the text messaging system on a Plam Centro system with ATT.
    Questions are related to Recoverying Deleted Text Messages
    1.  Do all incoming and outgoing messages get written to the messages_database.pdf on a Plam Centro (ATT)?
    2.  When a message is deleted, would it be correct to say that the message is not physically deleted but just that a record pointer in the database (messages_database.pdb) is reset so the messages appears to be deleted?
    Why I ask, is that I see a many many requests for people (myself included) of wanting to recover deleted text messages. (i.e. my 16 daughter will not email now becuase we check email but she does text unknown people constantly and it makes it very hard to keep her safe).  When she syncs her phone with her computer, the messages_database.pdb file is in the backup directory and if you open it with a text editor (notepad.exe) you can see only messages that have not beeen deleted.  She usually deletes all her text messages.  There is A LOT of extra data that appears to be encrypted and is not readable.
    Is it possible that the text messages are there but just that the database record pointers hve been reset OR are Plam text messages written to RAM some how; although that does seem to be the case, since when you sync, the messages_database.pdb files has any and all messages that have not deleted.
    It woul be VERY valuable (and I think profitable) if someone very high level knowledge of the messages_database.pdb file could write a PC application that would alloow you to undelete the text messages.  I know there are programs out there that can do this on SIM cards on systems that write the text messages to the sSIM card, but it is my understanding that messages are not stored on the SIM card but in RAM.
    Can any high level technical Palm programmer shed some light on this for me and let me know if there is a way to recovery deleted Text Messages on a Palm Centro?
    Much Apreciated,
    Greg
    Post relates to: Centro (AT&T)

     I    had the same problem.
    1.Search for a program call filez.prc (give your address I can send you) copy it to a memorycard. btw [email protected]
    2. Copy it to the palm device(it works on any)  activate the program on the palm chk rom at the top and chk all message database and smstxt and also some have 0000behind em.  note the sizes as the older ones are larger and copy them to the card.
    3. to view em use microsoft word and use recover txt from any file I think it is called. You will be able to see detail but be careful as it sometime displays truncated or mixed but you will be able to see most txt clearly. 

  • Palm Centro, won't send/recieve text messages or let me go onto the web or messangers

    So, I've had my Palm Centro for about 2-3 months now. It has always worked fine and what not but today when i woke up, i tried responding to my nightly texts and sign into msn
    I tried doing so and it says
    "Attaching GPRS"
    I have no idea what that means, it has never done that before and now nothing I use DAILY is working.
    Please help me?
    Post relates to: Centro (AT&T)

    Have you tried a Soft Reset?  It's the first thing to do with any Palm "hiccup"... Pull the battery, wait 10 seconds, and replace.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Nubie with Tungsten E2 with Mac sync, now have Palm Centro... can I sync both?

    I have been using a Tungsten E2 for about 12 months, and now have a Palm Centro phone.  I need to use both, and don't know what I should do about loading both disks on my Mac OS X 10.4.11 and if I can sync both.  Any thoughts?
    Post relates to: Tungsten E2
    Message Edited by FranAnne1 on 01-26-2010 07:32 PM

    You can sync both, but it is recommended that you have two different usernames for both devices. If the Centro is to become the main device you can sync the device to the same username of the E2. But the E2 then should be hard reset and synced with a different username.
    Reason this is, is so the devices and programs that run do not have problems in the future. If you have two different devices with the same username you can risk corrupted data, programs, and OS.
    If you have any questions please post back.

  • Palm centro wont sync epocrates

    Hello,
    I am having two problems with my palm centro
    1. I am trying to download epocrates, via a mac, to my palm centro. The icon shows up but when selected the program is empty. The hotsync message says there is an error in downloading. The centro says it is unable to complete, the installer is missing
    2. I want to edit the categories on my contacts. Everytime I try to edit I can get into the edit screen, type in the edit, but the centro re-boots when I hit OK, not saving the edit.
    Kfitt
    Post relates to: Centro (Sprint)

    Did these keys ever work?
    Have you installed anything lately that corresponds with the timing of the errors?
    Since the device is still covered under warranty, I'd take it back to whomever you purchased it through, either Sprint or Palm.  
    Note:  Both of them might ask you to Hard Reset the phone to determine whether the problem is caused by software.  Have you tried this yet?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for

  • Account Assignment Group for Customer........

    Hi Experts, We have created few new account assignment groups as per our customer requirement.....now if we want to update those new AAG for the already created documents like open sales order,sale order with delivery & open billing,how to proceed wi

  • FILE_GET_NAME and FILE

    Hi Experts,       Can any one explain the use of Function moudule File_Get_name and the use of Transaction Code FILE.

  • Quality capturing with FCP & an analog converter?

    i am making VHS(PAL) -> DVD transfers using a Canopus ADVC110 analog converter with iBook G4 with Tiger. previously i was using iMovie HD in capturing which worked fine and gave me good quality DV files, but since i needed more editing possibilities

  • Auto Populate one Field Based on Another Field

    I am trying to populate the description field after the user has entered a value in the item number field and then tabs or otherwise exits the item number field. I'm sure this is in the documentation somewhere, but I'm in a big hurry. By the way, thi

  • URL filtering problem

    Hi! I'm trying to set up local url filterin in my 881 router. However I can not use the parameter-map type urlfpolicy local ... command because there is no urlfpolicy type in the cli. cisco(config)#parameter-map type ?   consent        Parameter type