PAM authentication failure when attempting to run job

I'm attempting to run a scheduled job from grid control (version 10.2.0.5.0) against a Solaris server and it keeps failing with:-
Error Log
ERROR: Invalid username and/or password
Output Log
LOG: Local Authentication Failed...Attempt PAM authentication...PAM failed with error:
Despite entering an os username and password into the preferred credentails for this server which work when I try to logon to using putty, I can't connect to the server using the preferred credentils screen either. However, the agent can upload data without any problems. Can anyone point me in the correct direction as towards a resolution for this issue.

Thanks for the information, Oracle support came up with this technical note also. Its a bit strange as it mentions using the shared object for ldap in the pam.conf even though I'm not using ldap. Out of interest, do you use grid control, Solaris and pam authentication ?

Similar Messages

Authentication failure when attempting to pair mouse

For the last couple years I've had my Iogear Bluetooth mouse paired nicely with my Powerbook via a USB Bluetooth dongle (the built-in bluetooth doesn't work). Last week I paired my mouse with a friend's MacBook for several hours. When I tried to resume using the mouse with my own Powerbook, it was no longer paired, so I made a trip to Bluetooth Mouse Setup to initiate a new pairing. Unfortunately this no longer works; it finds the mouse successfully, but shortly after it reaches the "Pairing with your Bluetooth mouse" step, it displays a message in red lettering:
The pairing attempt was unsuccessful due to authentication failure. When ready, click Continue to try again.
I've retried the process many times during the last few evenings, but to no avail. Discoverable is turned on. I even reinstalled the Mac OS X 10.5.8 Combo update - still no go. Today I took my Bluetooth USB dongle and mouse to a Windows computer at work, and pairing worked just fine there, so I know it is not a hardware issue. Has anyone encountered this pairing error, and been able to resolve it?

I've been going crazy with this issue the last two days.
I had previously been using a Targus Bluetooth Mouse for Mac, but I have had to revert to an old Powerbook G4 as my main computer. I wanted to continue using my bluetooth mouse so after two tries I finally found a bluetooth dongle that the Mac recognizes. It seems to work like a charm, and is only annoying because of its bright green LED that blinks ceaselessly.
However I was most disappointed to find that when attempting to pair with my mouse, it recognized the mouse, connected, but then stalled out on the pairing process with the same red text message mentioned here.
I tried pairing with my old Palm m515 and that worked perfectly.
I booted up to a 10.4.11 install on an external drive and found the mouse to pair up and work perfectly.
Then I installed 10.5.4 on an external drive and it too connected perfectly. I tried creating a new user on my main drive's 10.5.8 install and that did not solve the problem. At this point I thought my main drive's 10.5.8 install was corrupt for some reason. I backed up my drive via Time Machine and proceeded the 6 hour new system fresh install.
My Leopard install disc is version 10.5.4. The mouse paired and worked great after the initial install. It was all for nought, however, because upon installing the 10.5.8 update on this untouched fresh system, the mouse was no longer recognized and would stall at the pairing process. I even got a kernel panic this time.
I don't know what Apple did between 10.5.4 and 10.5.8, but whatever it is made pairing with a bluetooth mouse via a Bluetooth dongle seemingly impossible. I assume there will be no fix for this since they have moved on to Snow Leopard.
Since people are having this same problem regardless of their dongle brand or mouse brand, I suppose I can be confident that this is not a hardware issue. Especially since the hardware all works perfectly up to at least 10.5.4. I'm not sure when it breaks because I just go straight from 10.5.4 to the 10.5.8 combo update.

Error detected while attempting to run job

Hi everyone,
One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred:   Error detected while attempting to run job
When I went to Essbase, I found that when I launched the rule an error appeared:
ERROR - 1006059 - Invalid block header: Illegal block type -- Please use the IBH Locate/Fix utilities to find/fix the IBH problem.
I read that it could be an issue related to corrupted blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could provide me help?
Regards,

I have XCP files:
----- Exception Error Log Begin -----
Current Date & Time:   Thu Nov 07 13:31:38 2013
Process Type:          Application
Application Name:      HYPCOLAN
Database Name:         COSTS
Exception Log File:    c:\Hyperion\logs\essbase\app\HYPCOLAN\COSTS\log00001.xcp
Current Thread Id:     5940
Exception Code:        0xC0000005=Access Violation
Exception Flags:       0x00000000=Continuable
Exception Address:     0x603B569F
Exception Parameters: 2
Exception Parameter 0: 0x00000001=Write Violation
Exception Parameter 1: 0x57970000 (Virtual Address)
----- Machine Registers -----
General Registers:
   EAX=0x795D0E18 EBX=0x5796FFF8 ECX=0x57970038
   EDX=0x0DC0F6CC ESI=0x00000048 EDI=0xFD320000
Control Registers:
   CS =0x0000001B EIP=0x603B569F Flg=0x00010283
   SS =0x00000023 ESP=0x024ACBB0 EBP=0x024ACBCC
Segment Registers:
   DS =0x00000023 ES =0x00000023 FS =0x0000003B
   GS =0x00000000
Floating Point Registers:
   CWD=0xFFFF027F SWD=0xFFFF3920 TWD=0xFFFF3FFF
   EOF=0x603B5699 ESL=0x0505001B DOF=0x603E9B50
   DSL=0xFFFF0023 CRS=0x00000000
Register Area (Hex):
   00 B0 B0 3A F7 7C 1D 90 CE BF
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 FC 09 A0 95 26 40
   00 00 C0 C6 B2 2C 7B 91 28 40
Debug Registers:
   DR0=0x00000000 DR1=0x00000000 DR2=0x00000000
   DR3=0x00000000 DR6=0x00000000 DR7=0x00000000
----- Stack -----
Stack Trace:
    0: 0x603b569f ESSSVRD@adReqCurrencyTransBegin + 0x9c22f 0x00000000010cf0a4 0x000000000dc0f6cc 0x000000000dc0f378 0x000000004a25db00
    1: 0x603b6ba8 ESSSVRD@adReqCurrencyTransBegin + 0x9d738 0x00000000010cf0a4 0x000000000032af01 0x0000000000000004 0x000000000000198a
    2: 0x603bb76b ESSSVRD@adReqCurrencyTransBegin + 0xa22fb 0x00000000010cf0a4 0x000000004a25db00 0x000000000dc0f330 0x000000000da45d00
    3: 0x603bc2d1 ESSSVRD@adReqCurrencyTransBegin + 0xa2e61 0x00000000000003a8 0x00000000010cf0a4 0x000000004a25db00 0x00000000214e006c
    4: 0x603bc441 ESSSVRD@adReqCurrencyTransBegin + 0xa2fd1 0x000000004a25db00 0x00000000024ad2a8 0x00000000010cf0a4 0x0000000000000000
    5: 0x603bf614 ESSSVRD@adReqCurrencyTransBegin + 0xa61a4 0x00000000010cf0a4 0x000000000025db00 0x0000000000000000 0x00000000010cf0a4
    6: 0x6037dc5f ESSSVRD@adReqCurrencyTransBegin + 0x647ef 0x0000000000000002 0x0000000000000000 0x00000000010cf0a4 0x00000000024ad2a8
    7: 0x6037e28d ESSSVRD@adReqCurrencyTransBegin + 0x64e1d 0x00000000010cf0a4 0x00000000024ad2a8 0x0000000000000002 0x0000000000000000
    8: 0x60376993 ESSSVRD@adReqCurrencyTransBegin + 0x5d523 0x000000000013003a 0x0000000000000000 0x00000000010cf0a4 0x00000000004ad200
    9: 0x601c902e ESSSVRD@adCSCRConvFixMbrFromBitMap + 0x1115e 0x000000000000012c 0x00000000596ea148 0x0000000000000000 0x00000000024ad40c
   10: 0x601af5d2 ESSSVRD@adOdomInc + 0x3172 0x00000000010cf0a4 0x00000000010cc462 0x000000000dc99940 0x000000000dc48fd8
   11: 0x601af718 ESSSVRD@adOdomInc + 0x32b8 0x00000000010cf0a4 0x00000000010cc462 0x00000000588edfd8 0x0000000000000000
   12: 0x601b02c5 ESSSVRD@adOdomInc + 0x3e65 0x00000000010cf0a4 0x000000000dc2d540 0x00000000010cf0a4 0x00000000604d283d
   13: 0x6032eb72 ESSSVRD@adReqCurrencyTransBegin + 0x15702 0x00000000010cf0a4 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660
   14: 0x6032db25 ESSSVRD@adReqCurrencyTransBegin + 0x146b5 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660 0x00000000604cfbba
   15: 0x603320d8 ESSSVRD@adReqCurrencyTransBegin + 0x18c68 0x00000000010cf0a4 0x000000000000000d 0x00000000024af660 0x0000000000004650
   16: 0x602ed5ac ESSSVRD@adThreadRegister + 0x467c 0x00000000010cf0a4 0x0000000000004650 0x0000000000000000 0x0000000000000000
   17: 0x602eec17 ESSSVRD@adThreadRegister + 0x5ce7 0x00000000000cf0a4 0x0000000000000000 0x0000000000000000 0x00000000010cf0a4
   18: 0x77e6481f kernel32@GetModuleHandleA + 0xdf 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
----- Application-Wide Configuration -----
Server Name:
Application Name:      HYPCOLAN
Elapsed App Time:      00:21:23:39
Module Count:          16
Module 0:             0x00401000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
Module 1:             0x60001000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
Module 2:             0x60B31000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
Module 3:             0x60CA1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
Module 4:             0x60DC1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
Module 5:             0x60E91000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
Module 6:             0x60F41000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
Module 7:             0x60F81000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
Module 8:             0x61031000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
Module 9:             0x61061000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
Module 10:             0x61135430 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
Module 11:             0x61151000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
Module 12:             0x61171000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
Module 13:             0x61181000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
Module 14:             0x61191000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
Module 15:             0x611A1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
----- Operating System Resources -----
System Date & Time:    Thu Nov 07 13:31:39 2013
Elapsed OS Time:       13:21:34:36
OS Name & Version:     Windows NT 5.02
CPU Count:             16
CPU Type:              Pentium
Correct System Memory information currently not available
Swap Flags:
   Enabled:            Y
   Disabled:           N
   File Found:         Y
   Denied:             N
Swap file(s):          c:\pagefile.sys
Correct Swap Space information currently not available
Total Drives:          6
Current Drive:         3
Drive 3:
   Drive Name:         C
   Volume Label:       Local Disk
   Drive Type:         Fixed
   File System:        NTFS
   Total Drive Space: 142689329 KB
   Free Drive Space:   71187620 KB
   Used Drive Space:   71501709 KB
Drive 4:
   Drive Name:         D
   Volume Label:       Drive_D
   Drive Type:         Fixed
   File System:        NTFS
   Total Drive Space: 292415096 KB
   Free Drive Space:   18586252 KB
   Used Drive Space:   273828844 KB
Drive 5:
   Drive Name:         E
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
Drive 6:
   Drive Name:         F
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
Drive 7:
   Drive Name:         G
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
Drive 21:
   Drive Name:         U
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
----- System-Wide Configuration -----
Elapsed Essbase Time: 00:21:23:39
Essbase Version:       11.1.1
Essbase Description:   ESB11.1.1.3.0B126
Network Type:          Windows Sockets
Environment Variable: ARBORPATH                 = c:\Hyperion\products\Essbase\EssbaseServer
Environment Variable: ARBORMSGPATH              = c:\Hyperion\products\Essbase\EssbaseServer\bin
Module Count:          16
Module 0:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 1:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 2:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 3:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 4:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 5:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 6:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 7:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 8:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 9:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 10:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 11:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 12:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 13:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 14:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 15:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
----- ESSBASE.CFG Configuration Values -----
Configuration Value:   JvmModuleLocation         = c:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
Configuration Value:   AuthenticationModule      = CSS
Configuration Value:   PORTINC                   = 3
Configuration Value:   DataErrorLimit            = 65000
Configuration Value:   CalcCacheHigh             = 1100000000
Configuration Value:   CalcCacheDefault          = 500000000
Configuration Value:   CalcCacheLow              = 30000000
Configuration Value:   CalcLockBlockHigh         = 4000000
Configuration Value:   CalcLockBlockDefault      = 900000
Configuration Value:   CalcLockBlockLow          = 400000
Configuration Value:   UpdateCalc                = False
Configuration Value:   NetDelay                  = 3000
Configuration Value:   NetRetryCount             = 1000
Configuration Value:   MultipleBitmapMemCheck    = True
Configuration Value:   ParCalcMultipleBitmapMemOpt = True
Configuration Value:   DYNCALCCACHEWAITFORBLK    = TRUE
Configuration Value:   DYNCALCCACHEBLKRELEASE    = TRUE
Configuration Value:   DYNCALCCACHEMAXSIZE       = 600M
Configuration Value:   DYNCALCCACHECOMPRBLKBUFSIZE = 400M
Configuration Value:   CalcLimitFormulaRecursion = TRUE;
Configuration Value:   AGENTPORT                 = 1423
Configuration Value:   SERVERPORTBEGIN           = 32768
Configuration Value:   SERVERPORTEND             = 33768
Configuration Value:   AGENTDESC                 = hypservice_1
----- Client Request Activity -----
Server Name:
Application Name:      HYPCOLAN
Total Request Threads: 20
Avail Request Threads: 19
Total Requests:        220
Average Requests:      111.000000
Weighted Average:      0.007431
Statistics Per Minute:
   Current Requests:   0
   Minimum Requests:   0.000000
   Maximum Requests:   111.000000
Thread Count:          20
Thread Id 3324:
   Request Name:        GetAttributeNameSpecs
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 4060:
   Request Name:        GetMbrInfo
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1692:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 736:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5288:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 784:
   Request Name:        OtlQueryMbrs
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 220:
   Request Name:        GetSelectedMbrInfo
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 4356:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 6100:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5944:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 4880:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1128:
   Request Name:        OtlQueryMbrs
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5728:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5960:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1208:
   Request Name:        GetOtlUMC
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5240:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1768:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 3648:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1736:
   Request Name:        GetOtlInfo
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5940:
   Request Name:        MaxL: Execute
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:38 2013
   End Time:            Pending
----- Exception Error Log End -----

Error message when attempting to run aam

I am encountering error message when attempting to run aam - Please connect to the internet, then try again when I am already connected

Please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for common resolutions to these difficulties.

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

HT1222 Is there something I should be aware of when attempting to run Adobe Flash (application/x-shockwave-flash) on 10.7.4?

Is there something I should be aware of when attempting to run Adobe Flash (application/x-shockwave-flash)?
I've been on a couple websites that tell me that I should download the above mentioned plugin. BUT when I click for it to be installed, I receive the mesage "No suitable plugins were found". I remember some comments about Flashplayer (?) being a problem and I don't want to screw things up. I'm running OS X 10.7.4. Any comments will be greatly appreciated.

Only download it from a trusted site such as adobe website. It's fine.
http://get.adobe.com/flashplayer/
A little reading on the Flashback Trojan:
http://hothardware.com/News/Mac-Trojan-Masquerades-As-Adobe-Flash-Player-Install er/

Error 102 when attempting to run software update

I am getting an Error 102 'error occurred while downloading the updates' message when attempting to run software update.
I've already cleared the cache, rebooted the machine, etc. with no luck.
I'm apparently stuck on V10.8 and cannot update software beyond that point.
Any other ideas?
Thanks!

Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/PackageKit
Referenced from: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
Reason: image not found
This indicates a mucked up installation, since the SU can't find the PackageKit file. Reinstall Snow Leopard from your install disc.

Dr Watson error when attempting to run an exe (LV 6.1) on NT OS

When attempting to run the LV 6.1 EXE I created on an NT system using the Application Builder I get a Windows Dr Watson ERROR and I cant go any further. The code works fine when running from LV. So far I have tried:
1) Created a Distribution Kit (so the RTE would be installed) ...same error.
2) I tried this same EXE on XP and it runs just fine.
P.S.
There is already an EXE running on this system (a previous version of the code) which was created using LV 5.1. Since I do not have the bld file I used the standard configuration (no dynamic VIs, just added the top level).
I really need to upgrade this system....thanks in advance for your help.

Hi Lupita,
Thank you for contacting National Instruments. It looks like you are currently running a 5.1 executable and then attempting to run a LabVIEW 6.1 executable. Are these operations intended to be simultaneous? Are both executables being run simultaneous when you are testing this on the XP system? Is it possible to halt the 5.1 application and test the 6.1 executable under these circumstances? Also, I would recommend downloading the Run-Time engine for 6.1 here, and verify that this behavior still occurs. There may be some shared resources that cannot be accessed, but I am currently unaware of how that would initiate a Drwtsn32.exe error.
Jason W.
National Instruments
Applications Engineer

VNI-2015 - when attempting to run a job

I installed OMS , when I schedule a job and run it it recieve an error pretaining to setting preferred credentials for the node..
Read some postings in Forums but still unclear about what settings I should use for the node, the logon as batch..
Sign onto the computer(windows 2000)asAdministrator/walker
sign onto the target database 'Runner' epks/charlie
sign onto the OMS as sysman/charlie
host computer is r2i5n2
Thanks

Hi,
JSebastian wrote:
No the EXECUTE privilege is granted directly to OITS
SQL> select grantee,owner,table_name,privilege from dba_tab_privs where table_name = 'KILL_MY_SESSION';
GRANTEE OWNER
TABLE_NAME PRIVILEGE
OIFS JOHN
KILL_MY_SESSION EXECUTEActually, Fsitja was asking about John's privileges. Are the privileges John needs granted directly to John (which is required), or merely to some role that John has (which will not help in a strored procedure)?
You may need to grant the privileges to John WITH ADMIN OPTION (or WITH GRANT OPTION for object privileges), if John is to grant others EXECUTE privileges on the procedure.
Whenever you have a problem, it helps if you post a complete test script that re-creates the problem.
In this case, include
(1) All relevant GRANT statements
(2) the full code of kill_my_session (or a simplified version, that gets the same error)
(3) how John calls it (sucessfully)
(4) how OITS calls it (unsucessfully)

Authentication failure when adding new 'Segment in Use'

Hi all!
I've set up integration between Siebel 8.1.1.9 and OBIEE 11.1.1.5.0. I've applied My Oracle Support article ID 1400715.1, importing the modified SIF and Workflow definitions and re-deployed the SRF to the server.
When attempting to drill into a folder in the 'Pick Segment' applet, I get the following error:
Operation 'impersonate' of Web Service 'com.siebel.analytics.web/soap/v1.SAWSessionService' at port 'SAWSessionServiceSoap' failed with the following explanation:
"Authentication error. An invalid User Name or Password was entered.".(SBL-EAI-04308)
I cannot for the life of me work out why this is happening. I've followed 1400715.1:
1. Created a new OBIEE user called 'impersonateuser' and added the 'oracle.bi.server.impersonateUser' permission
2. In Siebel, Marketing - Administration > Servers, I've set the User Id and Password fields for the 'Default Analytics Web Server' entry, ensuring that the password contains more than 8 characters and contains a number, with the 'impersonateuser' details. The 'impersonateuser' user can successfully log in to OBIEE / Dashboard
I've checked the Web Service definitions and replaced host name with host:port. The Web Service is definitely getting invoked but there seems to be a problem with the impersonation.
Any thoughts on how to resolve this?
Many thanks!
mroshaw

DOH - failed to RTFM correctly!
I'd not followed the instructions for adding the permission correctly - you have to read very cafrefully how to get to the right page to add the permission.
Working now! :)
Regards,
Oli

I am able to login to the Web, but when attempt to run the installer, it ask for a password and it does not work the password I used to login in the web.

I am new to Adobe Cloud, received the invitation from Adobe, create my account and I am able to login to the web. When Attempted to download Photoshop desktop, I was asked for Name and Password, the name was populated but I have to enter the password. I am using the password I entered at registration but it does not work and the Installer does not run.
I have a MacBook Pro with OS version 10.9.3.
Thanks,
Carlos

I figured out, the Installer need the username and password for the computer OS.

Error 21470247770 when attempting to run macros in Project Server v2010

We have some new users to our Project Server that are getting the following error when they attempt to run our macros which are stored on the Enterprise Global:
"System Error &H8007007E (-2147024770). The specified module could not be found."
We have already tried resetting their Global.mpt as well as checking for duplicate copies of the macros in their local Global.mpt, to no avail. This sounds like the system is preventing them access to the modules. Thoughts?
Chris

01:51.197: INFO: Setup exit code: 0x00009C47 (40007) - Required updates failed to download.
This is why I suggest people run ProcMon filtering with Operation Is WriteFile and then using Count occurrences... on Path to at least find out what all their diagnostics might be. However, even if there aren't any other diagnostics than this at least
ProcMon's other trace events will supplement the meaning of whatever you do see. E.g. provided you can infer a match of any one WriteFile event to a particular log record you can hopefully use preceding File and Registry access events as if they had
something to do with the generation of that message.
BTW I notice that you were essentially up-to-date in your maintenance for the version of IE that you were switching from. What would you say to someone who was trying to do what you are doing who was also saying that they weren't connected to the Internet
so therefore they didn't see any need to do any maintenance? Would the procedure you found help them too?
C.f.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/ie9-wont-install/8f6a724c-4fff-43fb-9cf4-bb2f13fc6144?page=2
Anyway I hadn't thought of using the IEAK as a method of doing this so I'm pointing that thread here for that possibility.
Thanks for the tip.
Robert Aldwinckle

ORA-01031: insufficient privileges when attempting to run a proc

I have a procedure called KILL_MY_SESSION that is defined with an AUTHID of DEFINER
The procedure owned by schema JOHN. The procedure makes several calls to DBMS_SQL PL/SQL package.
The last thing the procedure does with DBMS_SQL is issue an ALTER SYSTEM KILL SESSION statement.
Schema JOHN has the privileges to kill a session in the database.
If I log into the schema JOHN, I can successfully issue the ALTER SYSTEM KILL SESSION statement.
Also, while logged into the JOHN schema, I can successfully run the KILL_MY_SESSION procedure.
Now I have schema OITS. I've granted OITS the EXECUTE privilege on the JOHN.KILL_MY_SESSION procedure.
Since JOHN.KILL_MY_SESSION is a DEFINERs rights privilege, shouldn't OITS be able to run the procedure successfully and kill a session?
Here is some output from the OITS session when attempting to execute JOHN.KILL_MY_SESSION:
SQL> conn oifs@dbname
Enter password: ********
Connected.
SQL> set lines 500
SQL> select username, osuser, sid, serial#
2 from v$session
3 where username = 'OIFS';
USERNAME OSUSER SID SERIAL#
OIFS Administrator 142 325
OIFS Administrator 139 613
SQL> exec john.kill_my_session('142', '325')
BEGIN john.kill_my_session('142', '325'); END;
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SYS_SQL", line 1204
ORA-06512: at "SYS.DBMS_SQL", line 323
ORA-06512: at "EIADBA.KILL_MY_SESSION", line 20
ORA-06512: at line 1
Anyone have a clue as to what I'm doing wrong?
From the DBA_PROCEDURES view, here is the record for KILL_MY_SESSION
OWNER
OBJECT_NAME
OBJECT_TYPE AUTHID
JOHN
KILL_MY_SESSION
PROCEDURE DEFINER

Hi,
JSebastian wrote:
No the EXECUTE privilege is granted directly to OITS
SQL> select grantee,owner,table_name,privilege from dba_tab_privs where table_name = 'KILL_MY_SESSION';
GRANTEE OWNER
TABLE_NAME PRIVILEGE
OIFS JOHN
KILL_MY_SESSION EXECUTEActually, Fsitja was asking about John's privileges. Are the privileges John needs granted directly to John (which is required), or merely to some role that John has (which will not help in a strored procedure)?
You may need to grant the privileges to John WITH ADMIN OPTION (or WITH GRANT OPTION for object privileges), if John is to grant others EXECUTE privileges on the procedure.
Whenever you have a problem, it helps if you post a complete test script that re-creates the problem.
In this case, include
(1) All relevant GRANT statements
(2) the full code of kill_my_session (or a simplified version, that gets the same error)
(3) how John calls it (sucessfully)
(4) how OITS calls it (unsucessfully)

Error when attempting to run auto invoice report

Hi,
We are currently using Oracle E-Business Suite 11.2. One of our users was attempting to run an Auto Invoice Report this morning and got an error occur. The log file shows the following:
SELECT INTERFACE_LINE_ID
FROM   RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b5
AND    L2.INTERFACE_LINE_CONTEXT = 'UPLS INVOICES'
AND    L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND    L1.LINK_TO_LINE_ATTRIBUTE10 = L2.INTERFACE_LINE_ATTRIBUTE10
AND    L1.LINK_TO_LINE_ATTRIBUTE11 = L2.INTERFACE_LINE_ATTRIBUTE11
AND    L1.LINK_TO_LINE_ATTRIBUTE12 = L2.INTERFACE_LINE_ATTRIBUTE12
WHERE NVL(INTERFACE_STATUS, '~') != 'P'
AND (REQUEST_ID IS NULL OR REQUEST_ID IN (:b6)
AND EXISTS
SELECT 'x'
FROM   RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND    L2.INTERFACE_LINE_CONTEXT = 'UPLS INVOICES'
AND    L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND    L1.LINK_TO_LINE_ATTRIBUTE10 = L2.INTERFACE_LINE_ATTRIBUTE10
AND    L1.LINK_TO_LINE_ATTRIBUTE11 = L2.INTERFACE_LINE_ATTRIBUTE11
AND    L1.LINK_TO_LINE_ATTRIBUTE12 = L2.INTERFACE_LINE_ATTRIBUTE12
len = 1171
Current system time is 09-OCT-2013 07:33:50
APP-AR-11526: ORA-01427: single-row subquery returns more than one row
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE =
APP-AR-11526: 2913367/ar/src/autoinv/raamil.lpc 1333
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = sysdate,
LAST_UPDATED_BY = :b2,
LAST_UPDATE_LOGIN = :b3,
CUSTOMER_TRX_ID = NULL,
INTERFACE_LINE_ID = NVL(INTERFACE_LINE_ID,
RA_CUSTOMER_TRX_LINES_S.NEXTVAL),
SET_OF_BOOKS_ID = NVL(SET_OF_BOOKS_ID, :b4),
LINK_TO_LINE_ID =
Would someone be able to help me with this as my knowledge on Oracle is quite basic and the person who usually deals with these queries is out of the office.
Regards,
Jon Ditchfield

The error is
APP-AR-11526: ORA-01427: single-row subquery returns more than one row
A subquery that is supposed to return only one row is returning more than one. Most likely it is this query
SELECT 'x'
FROM   RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND    L2.INTERFACE_LINE_CONTEXT = 'UPLS INVOICES'
AND    L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND    L1.LINK_TO_LINE_ATTRIBUTE10 = L2.INTERFACE_LINE_ATTRIBUTE10
AND    L1.LINK_TO_LINE_ATTRIBUTE11 = L2.INTERFACE_LINE_ATTRIBUTE11
AND    L1.LINK_TO_LINE_ATTRIBUTE12 = L2.INTERFACE_LINE_ATTRIBUTE12

Random Authentication Failures when using AdminConnectionFactory

Has anyone experienced this problem when using the AdminConnectionFactory to create a JMXConnector. I have a Sun ticket open on this issue, but wanted to see if anyone else had any suggestions. Ticket # is 72502922
Our application uses the Sun AdminConnectionFactory to obtain a JMXConnector object. The code is being executed in a loop at a regular frequency. There is no dynamic nature to the code. All the information required to open a connection using the AdminConnectionFactory comes from static property files. So there is no question of one call being any different than a second call.
Every so often the call to create a connection fails with the exception message:
Cannot create JMXConnector to JMS server [jmssys.putnaminv.com:7683] using username [JMXMetricsClient.User] and password [XXX]
at com.putnam.jms.jmx.JMXUtil.<init>(JMXUtil.java:146)
at com.putnam.jms.metrics.core.MetricsRetrievalJob.run(MetricsRetrievalJob.java:58)
at com.putnam.jms.metrics.core.MetricsRetrievalJob.execute(MetricsRetrievalJob.java:37)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: javax.management.JMException: Caught exception when creating JMXConnector
at com.sun.messaging.AdminConnectionFactory.createConnection(AdminConnectionFactory.java:219)
at com.putnam.jms.jmx.JMXUtil.<init>(JMXUtil.java:138)
... 4 more
Caused by: java.lang.SecurityException: JMX connector server jmxrmi: Failure detected during authentication java.security.AccessControlException: [B4043]: Connection not authenticated
at com.sun.messaging.jmq.jmsserver.management.agent.MQJMXAuthenticator.authenticate(MQJMXAuthenticator.java:125)
at javax.management.remote.rmi.RMIServerImpl.doNewClient(RMIServerImpl.java:213)
at javax.management.remote.rmi.RMIServerImpl.newClient(RMIServerImpl.java:180)
at sun.reflect.GeneratedMethodAccessor60.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:305)
at sun.rmi.transport.Transport$1.run(Transport.java:159)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:142)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2312)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:277)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.messaging.AdminConnectionFactory.createConnection(AdminConnectionFactory.java:217)
... 5 more
The code to create a connection using the AdminConnectionFactory is straight forward:
JMXConnector jmxc = null;
try {
AdminConnectionFactory acf = new AdminConnectionFactory();
acf.setProperty(AdminConnectionConfiguration.imqAddress, hostname + ":" + port);
jmxc = acf.createConnection(user, password);
} catch (JMSException jmse) {
message = logMsgPrefix + "Cannot create JMXConnector to JMS server [" + hostname + ":" + port + "] using username [" + user + "] and password [" + password + "]";
log.error(message);
throw new GenericJMXException(message, jmse);
} catch (JMException jme) {
message = logMsgPrefix + "Cannot create JMXConnector to JMS server [" + hostname + ":" + port + "] using username [" + user + "] and password [" + password + "]";
log.error(message);
throw new GenericJMXException(message, jme);
What is causing this connection creation to fail. The same application will work just fine a few minutes later.
Thanks
Aspi Engineer
Putnam Investments

Thank you for the response.
Bug 6906978 is a defect that shows itself under high concurrency situations. In our case, we have a single quart based timer that is being triggered every 2 minutes to open a JMX connector. So my guess is that bug 6906978 and the problem that we have been experiencing are two different things.
But I am willing to try out 4.4U1P1. Any idea where I can download it from?
- Aspi

PAM authentication failure when attempting to run job

Similar Messages

Maybe you are looking for