Panic loop after patching solaris 10 x86

I have installed a number of patches on to my server and think I have messed things up somehow, wrong order, not in single user mode, missing dependencies, not rebooting, etc...
After installing I rebooted and now am stuck in a panic loop. I have gathered as much information as possible below.
The server is a Sunfire V20z running Solaris 10.
If anyone can interpret the below information and point me in the right direction that would be much appreciated.
Thanks.
=======================================================
Panic Message:
panic[cpu0]/thread=fffffffffbc22dc0: BAD TRAP: type=d (#gp General protection) rp=fffffffffbc45760 addr=0
#gp General protection
pid=0, pc=0xfffffffffb94a051, sp=0xfffffffffbc45850, eflags=0x10282
cr0: 80050033<pg,wp,ne,et,mp,pe> cr4: 6f0<xmme,fxsr,pge,mce,pae,pse>
cr2: 0 cr3: 9d60000 cr8: c
rdi: 0 rsi: 0 rdx: fffffffffbc45730
rcx: fffffffffbc45700 r8: 0 r9: ffffffff80178945
rax: f000f84dc000147a rbx: ffffffff80cdc088 rbp: fffffffffbc45870
r10: 0 r11: 0 r12: 0
r13: ffffffff80cdc268 r14: ffffffff80178940 r15: 1
fsb: 200000000 gsb: fffffffffbc240e0 ds: 0
es: 0 fs: 0 gs: 0
trp: d err: 0 rip: fffffffffb94a051
cs: 28 rfl: 10282 rsp: fffffffffbc45850
ss: 30
fffffffffbc45670 unix:real_mode_end+6ad1 ()
fffffffffbc45750 unix:trap+97b ()
fffffffffbc45760 unix:cmntrap+13f ()
fffffffffbc45870 genunix:init_node+51 ()
fffffffffbc458a0 genunix:i_ndi_config_node+f3 ()
fffffffffbc458c0 genunix:i_ddi_attachchild+41 ()
fffffffffbc458f0 genunix:devi_attach_node+71 ()
fffffffffbc45930 genunix:ndi_devi_online+a5 ()
fffffffffbc45960 unix:add_cpunode2devtree+e4 ()
fffffffffbc45970 unix:post_startup+78 ()
fffffffffbc459b0 genunix:main+d3 ()
fffffffffbc459c0 unix:_start+95 ()
From kmdb debugger:
SunOS Release 5.10 Version Generic_118855-36 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
load 'fs/specfs' id 7 loaded @ 0xfffffffffbb4a630/0xfffffffffbcdfee0 size 20832/248
installing specfs, module id 7.
load 'fs/devfs' id 9 loaded @ 0xfffffffffbb503e8/0xfffffffffbce08f1 size 19064/712
installing devfs, module id 9.
load 'sched/TS' id 11 loaded @ 0xfffffffffbb54e60/0xfffffffffbce0bdd size 12992/1984
installing TS, module id 11.
load 'sched/TS_DPTBL' id 12 loaded @ 0xfffffffffbb58120/0xfffffffffbce13bd size 376/2152
installing TS_DPTBL, module id 12.
load 'misc/sysinit' id 13 loaded @ 0xfffffffffbb58298/0xfffffffffbce1c25 size 656/160
installing sysinit, module id 13.
uninstalled sysinit
unloading sysinit, module id 13, loadcnt 1.
load 'misc/acpica' id 15 loaded @ 0xfffffffffbb5eef8/0xfffffffffbce1d35 size 360536/5712
load 'misc/pci_autoconfig' id 14 loaded @ 0xfffffffffbb58298/0xfffffffffbce1c25 size 27744/272
installing pci_autoconfig, module id 14.
installing acpica, module id 15.
load 'cpu/cpu.AuthenticAMD.15' id 18 loaded @ 0xfffffffffbbb6f50/0xfffffffffbce38b5 size 12608/368
installing cpu.AuthenticAMD.15, module id 18.
load 'mach/uppc' id 19 loaded @ 0xfffffffffbbbac90/0xfffffffffbce3a4a size 11784/616
installing uppc, module id 19.
load 'mach/pcplusmp' id 20 loaded @ 0xfffffffffbbbe480/0xfffffffffbce4d32 size 41992/5112
installing pcplusmp, module id 20.
load 'drv/rootnex' id 21 loaded @ 0xfffffffffbbc9470/0xfffffffffbce7cba size 18040/840
installing rootnex, module id 21.
load 'drv/options' id 22 loaded @ 0xfffffffffbbcdae8/0xfffffffffbce8012 size 432/232
installing options, module id 22.
load 'drv/pseudo' id 23 loaded @ 0xfffffffffbbcdc98/0xfffffffffbce80fa size 2704/648
installing pseudo, module id 23.
load 'drv/clone' id 24 loaded @ 0xfffffffffbbce728/0xfffffffffbce8382 size 1184/680
installing clone, module id 24.
load 'misc/scsi' id 26 loaded @ 0xfffffffffbbe2cf8/0xfffffffffbce91ba size 51384/13152
load 'drv/scsi_vhci' id 25 loaded @ 0xfffffffffbbcebc8/0xfffffffffbce862a size 82224/2960
installing scsi_vhci, module id 25.
installing scsi, module id 26.
load 'misc/busra' id 28 loaded @ 0xfffffffffbbf1820/0xfffffffffbcecab8 size 6776/136
load 'drv/isa' id 27 loaded @ 0xfffffffffbbef5b0/0xfffffffffbcec570 size 8816/1352
installing isa, module id 27.
installing busra, module id 28.
load 'drv/sad' id 29 loaded @ 0xfffffffffbbf3298/0xfffffffffbcecb58 size 5320/688
installing sad, module id 29.
load 'misc/fssnap_if' id 31 loaded @ 0xfffffffff3a39110/0xfffffffffbcee638 size 776/176
load 'fs/ufs' id 30 loaded @ 0xfffffffff3a00000/0xfffffffffbcece08 size 233744/6192
installing ufs, module id 30.
installing fssnap_if, module id 31.
load 'misc/hpcsvc' id 34 loaded @ 0xfffffffffbbfb698/0xfffffffffbcef438 size 4472/144
load 'misc/pcihp' id 33 loaded @ 0xfffffffff3a3a000/0xfffffffffbcef2f0 size 21232/328
load 'drv/pci' id 32 loaded @ 0xfffffffffbbf6998/0xfffffffffbcef058 size 19712/664
installing pci, module id 32.
installing pcihp, module id 33.
installing hpcsvc, module id 34.
load 'drv/pci_pci' id 35 loaded @ 0xfffffffffbbfc810/0xfffffffffbcef4d8 size 5144/688
installing pci_pci, module id 35.
load 'drv/mpt' id 36 loaded @ 0xfffffffff3a40000/0xfffffffffbcef788 size 83864/109432
installing mpt, module id 36.
load 'drv/sd' id 37 loaded @ 0xfffffffff3a55000/0xfffffffffbd0a300 size 134144/9160
installing sd, module id 37.
load 'fs/ctfs' id 38 loaded @ 0xfffffffff3a76000/0xfffffffffbd0c6ec size 14808/944
installing ctfs, module id 38.
load 'fs/procfs' id 39 loaded @ 0xfffffffff3a7a000/0xfffffffffbd0cafc size 126976/2800
installing procfs, module id 39.
load 'fs/mntfs' id 40 loaded @ 0xfffffffff3a99000/0xfffffffffbd0d600 size 10552/248
installing mntfs, module id 40.
load 'fs/tmpfs' id 41 loaded @ 0xfffffffff3a9c000/0xfffffffffbd0d708 size 27952/66488
installing tmpfs, module id 41.
load 'fs/objfs' id 42 loaded @ 0xfffffffffbbfdc28/0xfffffffffbd1dae8 size 7648/1056
installing objfs, module id 42.
panic[cpu0]/thread=fffffffffbc22dc0: BAD TRAP: type=d (#gp General protection) rp=fffffffffbc45760 addr=0
#gp General protection
pid=0, pc=0xfffffffffb94a051, sp=0xfffffffffbc45850, eflags=0x10282
cr0: 80050033<pg,wp,ne,et,mp,pe> cr4: 6f0<xmme,fxsr,pge,mce,pae,pse>
cr2: 0 cr3: a2a5000 cr8: c
rdi: 0 rsi: 0 rdx: fffffffffbc45730
rcx: fffffffffbc45700 r8: 0 r9: ffffffff80178dc5
rax: f000f84dc000147a rbx: ffffffff80566088 rbp: fffffffffbc45870
r10: 0 r11: 0 r12: 0
r13: ffffffff80566268 r14: ffffffff80178dc0 r15: 1
fsb: 200000000 gsb: fffffffffbc240e0 ds: 0
es: 0 fs: 0 gs: 0
trp: d err: 0 rip: fffffffffb94a051
cs: 28 rfl: 10282 rsp: fffffffffbc45850
ss: 30
fffffffffbc45670 unix:real_mode_end+6ad1 ()
fffffffffbc45750 unix:trap+97b ()
fffffffffbc45760 unix:cmntrap+13f ()
fffffffffbc45870 genunix:init_node+51 ()
fffffffffbc458a0 genunix:i_ndi_config_node+f3 ()
fffffffffbc458c0 genunix:i_ddi_attachchild+41 ()
fffffffffbc458f0 genunix:devi_attach_node+71 ()
fffffffffbc45930 genunix:ndi_devi_online+a5 ()
fffffffffbc45960 unix:add_cpunode2devtree+e4 ()
fffffffffbc45970 unix:post_startup+78 ()
fffffffffbc459b0 genunix:main+d3 ()
fffffffffbc459c0 unix:_start+95 ()
panic: entering debugger (no dump device, continue to reboot)
Loaded modules: [ uppc ufs unix krtld genunix specfs pcplusmp
cpu.AuthenticAMD.15 ]
kmdb: target stopped at:
kaif_enter+8: popfq
From kmdb msgbuf:
load 'cpu/cpu.AuthenticAMD.15' id 18 loaded @ 0xfffffffffbbb6f50/0xfffffffffbce3
8b5 size 12608/368
installing cpu.AuthenticAMD.15, module id 18.
load 'mach/uppc' id 19 loaded @ 0xfffffffffbbbac90/0xfffffffffbce3a4a size 11784
/616
installing uppc, module id 19.
load 'mach/pcplusmp' id 20 loaded @ 0xfffffffffbbbe480/0xfffffffffbce4d32 size 4
1992/5112
installing pcplusmp, module id 20.
mem = 2096168K (0x7ff0a000)
load 'drv/rootnex' id 21 loaded @ 0xfffffffffbbc9470/0xfffffffffbce7cba size 180
40/840
installing rootnex, module id 21.
root nexus = i86pc
load 'drv/options' id 22 loaded @ 0xfffffffffbbcdae8/0xfffffffffbce8012 size 432
/232
installing options, module id 22.
load 'drv/pseudo' id 23 loaded @ 0xfffffffffbbcdc98/0xfffffffffbce80fa size 2704
/648
installing pseudo, module id 23.
pseudo0 at root
pseudo0 is /pseudo
load 'drv/clone' id 24 loaded @ 0xfffffffffbbce728/0xfffffffffbce8382 size 1184/
680
installing clone, module id 24.
load 'misc/scsi' id 26 loaded @ 0xfffffffffbbe2cf8/0xfffffffffbce91ba size 51384
/13152
load 'drv/scsi_vhci' id 25 loaded @ 0xfffffffffbbcebc8/0xfffffffffbce862a size 8
2224/2960
installing scsi_vhci, module id 25.
installing scsi, module id 26.
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
load 'misc/busra' id 28 loaded @ 0xfffffffffbbf1820/0xfffffffffbcecab8 size 6776
/136
load 'drv/isa' id 27 loaded @ 0xfffffffffbbef5b0/0xfffffffffbcec570 size 8816/13
52
installing isa, module id 27.
installing busra, module id 28.
isa0 at root
NOTICE: ACPI source type ACPI_RESOURCE_TYPE_EXT_IRQ not supported
NOTICE: apic: local nmi: 0 1 1 1
NOTICE: apic: local nmi: 1 1 1 1
pcplusmp: vector 0x9 ioapic 0x2 intin 0x9 is bound to cpu 1
load 'drv/sad' id 29 loaded @ 0xfffffffffbbf3298/0xfffffffffbcecb58 size 5320/68
8
installing sad, module id 29.
load 'misc/fssnap_if' id 31 loaded @ 0xfffffffff3a39110/0xfffffffffbcee638 size
776/176
load 'fs/ufs' id 30 loaded @ 0xfffffffff3a00000/0xfffffffffbcece08 size 233744/6
192
installing ufs, module id 30.
installing fssnap_if, module id 31.
load 'misc/hpcsvc' id 34 loaded @ 0xfffffffffbbfb698/0xfffffffffbcef438 size 447
2/144
load 'misc/pcihp' id 33 loaded @ 0xfffffffff3a3a000/0xfffffffffbcef2f0 size 2123
2/328
load 'drv/pci' id 32 loaded @ 0xfffffffffbbf6998/0xfffffffffbcef058 size 19712/6
64
installing pci, module id 32.
installing pcihp, module id 33.
installing hpcsvc, module id 34.
pci0 at root: space 0 offset 0
pci0 is /pci@0,0
load 'drv/pci_pci' id 35 loaded @ 0xfffffffffbbfc810/0xfffffffffbcef4d8 size 514
4/688
installing pci_pci, module id 35.
PCI-device: pci1022,7450@a, pci_pci1
pci_pci1 is /pci@0,0/pci1022,7450@a
load 'drv/mpt' id 36 loaded @ 0xfffffffff3a40000/0xfffffffffbcef788 size 83864/1
09432
installing mpt, module id 36.
/pci@0,0/pci1022,7450@a/pci17c2,10@4 (mpt0):
Rev. 8 LSI, Inc. 1030 found.
/pci@0,0/pci1022,7450@a/pci17c2,10@4 (mpt0):
mpt0 supports power management.
pcplusmp: pci1000,30 (mpt) instance 0 vector 0x1b ioapic 0x3 intin 0x3 is bound
to cpu 0
/pci@0,0/pci1022,7450@a/pci17c2,10@4 (mpt0):
mpt0 Firmware version v1.3.27.0 (IM/IME)
/pci@0,0/pci1022,7450@a/pci17c2,10@4 (mpt0):
mpt0: IOC Operational.
/pci@0,0/pci1022,7450@a/pci17c2,10@4 (mpt0):
Volume 0 is optimal
PCI-device: pci17c2,10@4, mpt0
mpt0 is /pci@0,0/pci1022,7450@a/pci17c2,10@4
load 'drv/sd' id 37 loaded @ 0xfffffffff3a55000/0xfffffffffbd0a300 size 134144/9
160
installing sd, module id 37.
sd1 at mpt0: target 0 lun 0
sd1 is /pci@0,0/pci1022,7450@a/pci17c2,10@4/sd@0,0
load 'fs/ctfs' id 38 loaded @ 0xfffffffff3a76000/0xfffffffffbd0c6ec size 14808/9
44
installing ctfs, module id 38.
load 'fs/procfs' id 39 loaded @ 0xfffffffff3a7a000/0xfffffffffbd0cafc size 12697
6/2800
installing procfs, module id 39.
load 'fs/mntfs' id 40 loaded @ 0xfffffffff3a99000/0xfffffffffbd0d600 size 10552/
248
installing mntfs, module id 40.
load 'fs/tmpfs' id 41 loaded @ 0xfffffffff3a9c000/0xfffffffffbd0d708 size 27952/
66488
installing tmpfs, module id 41.
load 'fs/objfs' id 42 loaded @ 0xfffffffffbbfdc28/0xfffffffffbd1dae8 size 7648/1
056
installing objfs, module id 42.
SMBIOS v2.31 loaded (1939 bytes)
panic[cpu0]/thread=fffffffffbc22dc0:
BAD TRAP: type=d (#gp General protection) rp=fffffffffbc45760 addr=0
#gp General protection
pid=0, pc=0xfffffffffb94a051, sp=0xfffffffffbc45850, eflags=0x10282
cr0: 80050033<pg,wp,ne,et,mp,pe> cr4: 6f0<xmme,fxsr,pge,mce,pae,pse>
cr2: 0 cr3: a2a5000 cr8: c
rdi: 0 rsi: 0 rdx: fffffffffbc45730
rcx: fffffffffbc45700 r8: 0 r9: ffffffff80178dc5
rax: f000f84dc000147a rbx: ffffffff80566088 rbp: fffffffffbc45870
r10: 0 r11: 0 r12: 0
r13: ffffffff80566268 r14: ffffffff80178dc0 r15: 1
fsb: 200000000 gsb: fffffffffbc240e0 ds: 0
es: 0 fs: 0 gs: 0
trp: d err: 0 rip: fffffffffb94a051
cs: 28 rfl: 10282 rsp: fffffffffbc45850
ss: 30
fffffffffbc45670 unix:real_mode_end+6ad1 ()
fffffffffbc45750 unix:trap+97b ()
fffffffffbc45760 unix:cmntrap+13f ()
fffffffffbc45870 genunix:init_node+51 ()
fffffffffbc458a0 genunix:i_ndi_config_node+f3 ()
fffffffffbc458c0 genunix:i_ddi_attachchild+41 ()
fffffffffbc458f0 genunix:devi_attach_node+71 ()
fffffffffbc45930 genunix:ndi_devi_online+a5 ()
fffffffffbc45960 unix:add_cpunode2devtree+e4 ()
fffffffffbc45970 unix:post_startup+78 ()
fffffffffbc459b0 genunix:main+d3 ()
fffffffffbc459c0 unix:_start+95 ()

I am seeing something similar to this, but I can bring it up and it crashed after a random amount of time. Any ideas what patches could have caused this?
Jun 24 13:32:08 voldemort2 unix: [ID 836849 kern.notice]
Jun 24 13:32:08 voldemort2 ^Mpanic[cpu3]/thread=fffffe8000c6ec80:
Jun 24 13:32:08 voldemort2 genunix: [ID 683410 kern.notice] BAD TRAP: type=d (#gp General protection) rp=fffffe8000c6ea70 addr=fffffe84c13befdb
Jun 24 13:32:08 voldemort2 unix: [ID 100000 kern.notice]
Jun 24 13:32:08 voldemort2 unix: [ID 839527 kern.notice] sched:
Jun 24 13:32:08 voldemort2 unix: [ID 753105 kern.notice] #gp General protection
Jun 24 13:32:08 voldemort2 unix: [ID 358286 kern.notice] addr=0xfffffe84c13befdb
Jun 24 13:32:08 voldemort2 unix: [ID 243837 kern.notice] pid=0, pc=0xfffffffffb834fed, sp=0xfffffe8000c6eb68, eflags=0x10286
Jun 24 13:32:08 voldemort2 unix: [ID 211416 kern.notice] cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6f8<xmme,fxsr,pge,mce,pae,pse,de>
Jun 24 13:32:08 voldemort2 unix: [ID 354241 kern.notice] cr2: fffffe84c13befdb cr3: 1072d000 cr8: c
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] rdi: ffffffff8027c531 rsi: 1 rdx: 200
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] rcx: 2 r8: ffffffff8027c4c0 r9: ffffffff8027c4c0
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] rax: fffffe8000c6ec80 rbx: ffffffff98401000 rbp: fffffe8000c6ebc0
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] r10: ffffffff97bab7b4 r11: ff00000000000000 r12: ffffffffb5fd4bc0
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] r13: 4 r14: ffffffff8027c531 r15: 1
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] fsb: ffffffff80000000 gsb: ffffffff98401000 ds: 43
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] es: 43 fs: 0 gs: 1c3
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] trp: d err: 0 rip: fffffffffb834fed
Jun 24 13:32:08 voldemort2 unix: [ID 592667 kern.notice] cs: 28 rfl: 10286 rsp: fffffe8000c6eb68
Jun 24 13:32:08 voldemort2 unix: [ID 266532 kern.notice] ss: 30
Jun 24 13:32:08 voldemort2 unix: [ID 100000 kern.notice]
Jun 24 13:32:08 voldemort2 genunix: [ID 655072 kern.notice] fffffe8000c6e980 unix:real_mode_end+71e1 ()
Jun 24 13:32:08 voldemort2 genunix: [ID 655072 kern.notice] fffffe8000c6ea60 unix:trap+b04 ()
Jun 24 13:32:08 voldemort2 genunix: [ID 655072 kern.notice] fffffe8000c6ea70 unix:cmntrap+140 ()
Jun 24 13:32:08 voldemort2 genunix: [ID 655072 kern.notice] fffffe8000c6ebc0 unix:mutex_owner_running+d ()
Jun 24 13:32:08 voldemort2 genunix: [ID 655072 kern.notice] fffffe8000c6ec20 cpqary3:cpqary3_sw_isr+5a ()
Jun 24 13:32:08 voldemort2 genunix: [ID 655072 kern.notice] fffffe8000c6ec60 unix:av_dispatch_softvect+62 ()
Jun 24 13:32:08 voldemort2 genunix: [ID 655072 kern.notice] fffffe8000c6ec70 unix:intr_thread+b4 ()
Jun 24 13:32:08 voldemort2 unix: [ID 100000 kern.notice]
Jun 24 13:32:08 voldemort2 genunix: [ID 672855 kern.notice] syncing file systems...
Jun 24 13:32:09 voldemort2 genunix: [ID 733762 kern.notice] 350
Jun 24 13:32:10 voldemort2 genunix: [ID 733762 kern.notice] 349
Jun 24 13:32:11 voldemort2 genunix: [ID 733762 kern.notice] 348
Jun 24 13:32:38 voldemort2 last message repeated 20 times
Jun 24 13:32:39 voldemort2 genunix: [ID 622722 kern.notice] done (not all i/o completed)
Jun 24 13:32:40 voldemort2 genunix: [ID 111219 kern.notice] dumping to /dev/dsk/c3t0d0s1, offset 1719074816, content: kernel
Jun 24 13:33:13 voldemort2 genunix: [ID 409368 kern.notice] ^M100% done: 1232512 pages dumped, compression ratio 4.65,
Jun 24 13:33:13 voldemort2 genunix: [ID 851671 kern.notice] dump succeeded

Similar Messages

  • "Short read error" after patching solaris 10 x86?

    We recently bought an Ultra 20 with Solaris 10. The first thing we did was attempt to patch it with smpatch. Specifically, we did the following steps:
    > smpatch update
    > shutdown -i s -g 0
    > smpatch add -x idlist=/var/sadm/disallowed_patch_list
    > reboot
    When the machine rebooted we got a "short read error" message when trying to load in various drivers and wouldn't boot. We assumed that the disk had crashed and we reinstalled solaris from the DVDs. After the reinstallation, we went to patch the machine again, with the same steps, and exactly the same thing happened!
    So is there something wrong with patching solaris 10 on x86? Has anybody else experienced this problem where the patching corrupts the disks (or the drivers)?
    Thanks.
    Karl

    There have always been "short read error"s during boot on <b>some</b> systems with Solaris 10 x86 since the release.
    http://groups.yahoo.com/group/solarisx86/message/29310
    http://groups.yahoo.com/group/solarisx86/message/29358
    Do you get the error every time during boot? Sometimes it helps to
    press <RETURN> at the boot prompt, and not let the system wait for
    the five second timeout.

  • Apache cores after patching Solaris 10

    Hi Folks,
    after patching Solaris 10 with the recommended Patch Cluster i'm not able to start Apache with apachectl sslstart.
    Apache cores! Changing <VirtualHost default:443> to <IP-Addr.:443> in ssl.conf solves the problem.
    Any idea why?
    Ciao
    M. Garcia

    Hi Folks,
    after patching Solaris 10 with the recommended Patch Cluster i'm not able to start Apache with apachectl sslstart.
    Apache cores! Changing <VirtualHost default:443> to <IP-Addr.:443> in ssl.conf solves the problem.
    Any idea why?
    Ciao
    M. Garcia

  • Out Of Frequency problem -- After Installing solaris 10 x86

    Hi Solarians,
    After installing solaris 10, I am getting "*Out Of Frequency*" problem and I am not able to login to Desktop session. Please let me know configuration changes that i need to make along with exact paths as i am new to solaris.Currently i am running dual OS (XP and Solaris).
    Out of Frequency
    HF: 42.7 KHZ
    VF: 40.0 HZ
    Operating Frequency
    HF: 30 - 71 KHZ
    VF: 50 - 160 HZ
    Please help me solve this problem, Thanks in advance .....
    Thanks,
    Mahesh

    hi;
    I faced that problem when I was a beginner on solaris as you were. I tried to install solaris to my windows installed x86 based PC. in my fisrst few attempts ý always saw that message, afterwards somehow I managed to install solaris to my PC but this time windows failed.I think that is because of the inconsistencies between those OS but if you need to install solaris you can use VM ware workstation with this software you can use both OS without problems.

  • After installed Solaris 10 X86 I CAN'T SEE GUI

    Hi,
    I have installed Solaris 10 X86. while installing the software from the CD
    I got a nice GUI . After install all 5 CD and reboot I got a choice to boot into Solaris or WIndows, I chose Solaris and wait to loads the GUI but I got only black screen and a monitor message saying the Frequency is low. I got only # prompt .
    run search forums about gui problem and no find specific help.
    run kdmconfig and change to Xsun, it's not solve the problem.
    I CAN'T SEE GUI.
    Do i need run any command or install any other program ?
    Thanks,
    NEED HELP!!!!!

    Hi ,
    try to run #kdmconfig at ur promt , it will ask u to set new gui settings
    select ur appropriate vga card , which is being supported ny ur os , n make a logoff , automatically it will drop u on a gui screen to make a login
    or u can use #/usr/X11/bin/xorgconfig to define all the new settings from the scratch , i think it should help u out
    regards
    Kinshuk

  • No signal at all after installing solaris-10 x86

    After successfully installing Solaris-10 x86 on my sytem when I try to boot , there is a Sendmail alert that "My unqualified host name sleeping for retry" and after that there is no signal on monitor . though CPU is running and accessing hard disk. This leave me with no option.
    System is not on the network and having Pentium-4 processor and 915G chipset motherbord.

    I'm guessing your X11 is misconfigured. You need to make the settings match what your monitor can display.

  • New 21" iMac with SSD; panic loop after updating to 10.8.3

    I updated to 10.8.3 this morning without issues. Later in the day, the computer spontaneously restarted and now is in a panic loop. Safe boot doesn't work, but I did restart from a clone. I also started from the Recovery Disk and Disk Utility confirms the disk is fine. Here is the panic:
    Interval Since Last Panic Report:  6731981 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    E178DF23-205D-5853-FB09-A99931F956CA
    Mon Apr  1 21:12:47 2013
    panic(cpu 3 caller 0xffffff80062b7e75): Kernel trap at 0xffffff7f86a3f227, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffffffffffffff, CR3: 0x0000000014d6d024, CR4: 0x00000000001606e0
    RAX: 0x0000000000000001, RBX: 0xffffff80d88ac004, RCX: 0xffffff801a81a51f, RDX: 0x0000000000002390
    RSP: 0xffffff80fb1f2d00, RBP: 0xffffff80fb1f2d00, RSI: 0x000000000000001e, RDI: 0xffffffffffffffff
    R8:  0xffffff7f86a3f2da, R9:  0xffffff7f86a3f211, R10: 0xffffff7f86a03398, R11: 0xffffff7f86a3f22d
    R12: 0xffffff80d88ac004, R13: 0xffffff7f86a02e01, R14: 0xffffff801a07e004, R15: 0xffffff7f86a03305
    RFL: 0x0000000000010286, RIP: 0xffffff7f86a3f227, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffffffffffffff, Error code: 0x0000000000000000, Fault CPU: 0x3
    Backtrace (CPU 3), Frame : Return Address
    0xffffff80fb1f29a0 : 0xffffff800621d626
    0xffffff80fb1f2a10 : 0xffffff80062b7e75
    0xffffff80fb1f2be0 : 0xffffff80062cd3bd
    0xffffff80fb1f2c00 : 0xffffff7f86a3f227
    0xffffff80fb1f2d00 : 0xffffff7f885bd541
    0xffffff80fb1f2d30 : 0xffffff7f885bd938
    0xffffff80fb1f2d50 : 0xffffff7f869fe6c4
    0xffffff80fb1f2da0 : 0xffffff7f86a35f5e
    0xffffff80fb1f2f60 : 0xffffff7f86a359c7
    0xffffff80fb1f2fa0 : 0xffffff7f86a2e394
    0xffffff80fb1f3000 : 0xffffff7f868f5374
    0xffffff80fb1f3050 : 0xffffff7f869394a5
    0xffffff80fb1f3890 : 0xffffff7f8693ad9d
    0xffffff80fb1f3ac0 : 0xffffff7f8693b81b
    0xffffff80fb1f3b60 : 0xffffff7f868dac7b
    0xffffff80fb1f3bd0 : 0xffffff7f868da3bd
    0xffffff80fb1f3c30 : 0xffffff7f868dbbde
    0xffffff80fb1f3c60 : 0xffffff7f8689371e
    0xffffff80fb1f3cf0 : 0xffffff7f8688be70
    0xffffff80fb1f3d20 : 0xffffff7f868dc40b
    0xffffff80fb1f3d70 : 0xffffff8006632dbb
    0xffffff80fb1f3dc0 : 0xffffff8006663437
    0xffffff80fb1f3e30 : 0xffffff8006297fcf
    0xffffff80fb1f3e80 : 0xffffff8006220aed
    0xffffff80fb1f3eb0 : 0xffffff8006210448
    0xffffff80fb1f3f00 : 0xffffff800621961b
    0xffffff80fb1f3f70 : 0xffffff80062a5db6
    0xffffff80fb1f3fb0 : 0xffffff80062cdc23
         Kernel Extensions in backtrace:
            com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f86882000->0xffffff7f868b9fff
               dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f86844000
            com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f868 d9000->0xffffff7f86be8fff
               dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f86844000
               dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f868c5000
               dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f86882000
            com.apple.nvidia.gk100hal(8.1)[5122FE48-4118-30A5-8E71-7219C580E7B9]@0xffffff7f 88541000->0xffffff7f88845fff
               dependency: com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f868 d9000
               dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f86844000
    BSD process name corresponding to current thread: WindowServer
    Boot args: -v
    Mac OS version:
    12D78
    Kernel version:
    Darwin Kernel Version 12.2.1: Thu Oct 18 12:13:47 PDT 2012; root:xnu-2050.20.9~1/RELEASE_X86_64
    Kernel UUID: 3F93B852-872F-3DF0-BCF8-46D48024C422
    Kernel slide:     0x0000000006000000
    Kernel text base: 0xffffff8006200000
    System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
    System uptime in nanoseconds: 10859124969
    last loaded kext at 10068376985: com.apple.filesystems.autofs          3.0 (addr 0xffffff7f87ba6000, size 45056)
    loaded kexts:
    com.Logitech.Control Center.HID Driver          3.5.1
    com.apple.filesystems.autofs          3.0
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AGPM          100.12.81
    com.apple.driver.ApplePlatformEnabler          2.0.6d1
    com.apple.iokit.IOBluetoothSerialManager          4.1.2f9
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.5fc10
    com.apple.driver.AppleHDA          2.3.5fc10
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.13
    com.apple.driver.AppleMikeyDriver          2.3.5fc10
    com.apple.GeForce          8.0.6
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleIntelHD4000Graphics          8.0.6
    com.apple.driver.AppleMuxControl          3.2.13
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.nvidia.NVDAStartup          8.0.6
    com.apple.driver.AppleIntelFramebufferCapri          8.0.6
    com.apple.iokit.IOBluetoothUSBDFU          4.1.2f9
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.2f9
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.CoreStorageFsck          296.10
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AirPort.Brcm4331          612.20.14
    com.apple.iokit.AppleBCM5701Ethernet          3.5.0b9
    com.apple.driver.AppleAHCIPort          2.5.1
    com.apple.driver.AppleUSBHub          5.5.0
    com.apple.driver.AppleSDXC          1.4.0
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleUSBXHCI          1.5.1
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.nvidia.gk100hal          8.1.0
    com.apple.driver.DspFuncLib          2.3.5fc10
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.driver.AppleHDAController          2.3.5fc10
    com.apple.iokit.IOHDAFamily          2.3.5fc10
    com.apple.iokit.IOSurface          86.0.3
    com.apple.iokit.IOBluetoothFamily          4.1.2f9
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.driver.AppleThunderboltEDMSink          1.1.8
    com.apple.driver.AppleThunderboltEDMSource          1.1.8
    com.apple.driver.AppleGraphicsControl          3.2.13
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.NVDAResman          8.0.6
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.2f9
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginFamily          5.3.0d47
    com.apple.driver.AppleUSBHIDKeyboard          170.2
    com.apple.driver.AppleHIDKeyboard          170.2
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
    com.apple.iokit.IOUSBMassStorageClass          3.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
    com.apple.driver.AppleUSBMergeNub          5.5.0
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.driver.CoreStorage          296.10
    com.apple.driver.AppleThunderboltNHI          1.6.3
    com.apple.iokit.IOThunderboltFamily          2.1.8
    com.apple.iokit.IO80211Family          510.4
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IOUSBUserClient          5.5.0
    com.apple.iokit.IOUSBFamily          5.5.0
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Unable to gather system configuration information.
    I suspect it has to do with some graphics drivers. Suggestions? Thanks.

    Your system is crashing when it comes on
    com.Logitech.Control Center.HID Driver          3.5.1
    My recommendation would be to update or uninstall the app that is using it. Remember OS X does not have to be running the app in order for the KP to occur, it just needs to "see" it. If you choose to uninstall locate and follow the developers instructions for doing so.

  • Ypserv loops after patching

    I applied the latest (Aug/25/06) patch set the other day. On my NIS master ypserv, after a time greater then 10 minutes, goes into a loop taking over one out of my processors.
    4979 root 1 0 0 5576K 2176K cpu3 95:00 24.99% ypserv
    In syslog there is a warning on startup.
    ypserv[4979]: [ID 783678 daemon.warning] /usr/lib/netsvc/yp/ypserv: no /var/yp/securenets file
    But securenets has never been required.
    I don't know much about dtrace but from what I have extracted from it is:
    errors:
    1 ypserv stat 2 No such file or directory
    1 ypserv fcntl 22 Invalid argument
    1 ypserv getmsg 11 Resource temporarily unavailable
    1 ypserv open64 2 No such file or directory
    1 ypserv lwp_wait 45 Deadlock condition.
    The deadlock interest me but I don't know how to figure out what is causin g the deadlock.
    I tried a dtruss. It is mainly doing:
    36254 pollsys(0x63A50, 0x5, 0x0) = 1 0
    36261 ioctl(0x5, 0x530F, 0xFFBFFA3C) = 1 0
    36263 fstat(0x5, 0xFFBFF960, 0xFEEC2000) = 0 0
    36268 lwp_sigmask(0x3, 0x0, 0x0) = 0xFFFF 0
    36269 lwp_sigmask(0x3, 0x2000, 0x0) = 0xFFFF 0
    Not a huge help. The only thing it tried top open while I was watching it
    was:
    open("/dev/ticotsord\0", 0x2, 0x0) = 9 0
    If someone could point me to a few other things to try to figure out why ypserv is gone into training for "America's Got Talent" the infinate loop edition, I would love to hear it.
    Part of the process of figuring this out has been reading documentation, and for the first time in a while I've been very disapointed about the lack of man pages on Solaris. Did I forget to install a package or are there a lower standard for documentation coming out of Sun? For example I go looking for the man page for lwp_sigmask. It doesn't exist. sigmask does, but that syscall only takes 1 argument, when as we can see above lwp_sigmask takes 3.
    I could back out of the patches, but I haven't had to do that under Solaris in ten years of administration and I would rather not start now.
    Thanks for the help.

    Since you mention dtrace, I assume you are referring to a solaris 10 machine.
    Its possible you are hitting the "tcp_fusion" bug there was a recent advisory about.
    Try adding
    set ip_do_tcp_fusion=0
    to /etc/system and rebooting.

  • AT300SE - Boot loop after patch update

    After the latest patch update, my tablet AT300se not booting up.
    Some one please provide me the Stock ROM ?
    i am in India now and i can't find any toshiba tablet service center in India.

    > is ti possible to get the stock ROM or custom ROM?
    I dont think so since the updates are received via Toshiba Service Station.
    Unfortunately, I think you last chance to get this device running, is a Toshiba authorized service point.
    Here you can find an database with all ASPs world wide:
    http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
    In India following ASP is available:
    +inTarvo Technologies Limited+
    +C/o Subham Computers, 83, Bidhan Road, Paul Building Complex+
    +Siliguri,West Bengal 734001+
    +Phone:+ ++91-353-2525624+
    Hope they could help you

  • Driver for Intel Corp. Intel(R) PRO/Wireless 2200BG in Solaris 10 x86

    Hi Folks,
    I bought a Laptop with the NIC mentioned in the Subject. After installing Solaris 10 x86 I'd like to install a driver for this card. Can someone of you tell me how, or point me to a good documentation?
    Cheers
    Sven

    as far as i know, intel wireless not supported yet in solaris 10.
    damn, intel and solaris have not realy work our on their support relationships. No wonder Sun went for AMD. :p

  • Solaris reboot loop after recommended patch cluster

    Hi,
    I have a problem with my solaris 10 x86 install on my intel notebook. after installing the latest recommended patch cluster and the necessary reboot my latop stays in a loop.
    one of the last lines I was able to see:
    panic&#91;cpu0&#93;/thread=fec1d660: boot_mapin():No pp for pfnum=20fff
    fec33b4c genunix:main+1b ()
    skipping system dump - ....
    rebooting...
    any ideas ?
    cu+thx

    This horrible patch caught me out too. I found this and it fixed my problem.
    http://weblog.erenkrantz.com/weblog/software/solaris
    <snip>
    &#91;...at the Solaris boot prompt; enable kmdb, debugging, and single-user
    so that you can remove the patch and reboot...&#93;
    boot -kds
    &#91;...wait for it to boot...&#93;
    physmax:w
    :c
    &#91;...you'll see 'stop on write of'...&#93;
    physmax/X
    &#91;...you'll see something like the following line:
    physmax: bff7f
    this is a hex number; add one; so if you see bff7f,
    your next line will need to be bff80...&#93;
    physxmax/W bff80
    :c
    &#91;...system will boot and go into single user mode...
    now, go toss those patches...&#93;
    patchrm 118844-19 120662-03 118345-12 118376-04 \
    118565-03 118886-01 119076-10 118813-01 \
    118881-02 120082-07 119851-02
    shutdown -i6 -y -g0 "sun should test their patches"
    </snip>

  • Keyboard messed up on Solaris 10 x86 after applying patch update

    I have run into a keyboard problem on my Solaris 10 desktop. The keyboard is messed up. When I type �root� then it echoes as �eiir�. It is a Solaris 10 x86 system with PS/2 keyboard. The keyboard layout is US-English and type is generic 104 keys. The keyboard works fine in text mode but gets messed up as soon as the graphical login screen comes up.
    The output for �eeprom kbd-type� is �kbd-type=US-English(104-Key)�.
    The output for �kbd -l� is
    �type=6
    layout=33 (0x21)
    delay(ms)=500
    rate(ms)=40�.
    Running command �showrev -p | grep 118966� shows �
    Patch: 118966-11 Obsoletes: Requires: Incompatibles: Packages: SUNWxorg-xkb, SUNWxorg-server, SUNWxorg-doc, SUNWxorg-graphics-ddx
    Patch: 118966-21 Obsoletes: Requires: 118860-01 Incompatibles: Packages: SUNWxorg-xkb, SUNWxorg-server, SUNWxorg-cfg, SUNWxorg-doc, SUNWxorg-graphics-ddx, SUNWxorg-client-programs
    The file /var/dt/Xerrors contains the following error �
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    Error: No Symbols named "ralt_switch_multikey" in the include file "level3"
    Exiting
    Abandoning symbols file "basic"
    Error: Num_Lock added to symbol map for multiple modifiers
    Using Mod3, ignoring Mod2.
    Abandoning symbols file "default"
    My keyboard was working fine till around a couple of days back and messed up after performing updates with Sun Update Manager. The patch 118966-21 was installed during that update and so was patch 118844-30. I have not tried uninstalling either of these patches to see if that fixes the problem. Should I?
    Please help!!! Thanks�

    Problem solved... me the n00b...
    After reading the log in /var/dt/Xerrors more closely this time I found that it was trying to load module "Keyboard" for the device "Keyboard1" and was not able to find that module. The log was also suggesting that this module is deprecated and I should use "kbd" instead... Made the changes in xorg.conf and things are good now...

  • Solaris patching on solaris 10 x86

    just wondering if anyone can assist. i have just installed solaris 10 x86 recommended patches on a 16 disks server. where first 2 disks are mirrored called rpool, and remaining 14 disks are raid z called spool. upon installing the patches successfully and rebooting server, i am coming up with the following error:
    NOTICE: Can not read the pool label from '/pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@0,0:a /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@1,0:a'
    NOTICE: spa_import_rootpool: error 5, Inc. All rights reserved.
    Cannot mount root on /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@0,0:a /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@1,0:a fstype zfs
    panic[cpu0]/thread=fffffffffbc28820: vfs_mountroot: cannot mount root
    fffffffffbc4b190 genunix:vfs_mountroot+323 ()
    fffffffffbc4b1d0 genunix:main+a9 ()
    fffffffffbc4b1e0 unix:_start+95 ()
    skipping system dump - no dump device configured
    rebooting...
    It looks like the solaris 10 os cannot find zfs filesystem and keeps on rebooting in normal solaris os mode, but when I go to safe mode and type: zfs list, I can see zfs rpool (mirrored) file system and cannot see the zfs spool (raid z) file system, any ideas on how i can fix the boot problem and get zfs spool back in the safest way possible?...

    I finally figured it out. It seems that kernel patch 137138-09 was the culprit. It took me a while to test each kernel patch but I found out that if you have a mirrored volume or a virtual logical volume this will affect you. Also, after I did all this testing I finally found the sunsolve article referencing this patch. Seems you can install the patch, but you have to install 125556-01 first. Here's the article: http://sunsolve.sun.com/search/document.do?assetkey=1-66-246206-1

  • Fresh solaris 10 x86 install patch update problems 119060-17 ...

    Just yesterday, i installed a fresh Solaris 10 x86 onto some pc hardware. After getting solaris installed and issues with my network card, i downloaded and installed the free version of the update manager 1.0.x. Next, i proceeded to update all the general patches for the solaris 10 system. I started with the command 'pprosvc -i' from a terminal. It then proceeded to download and validate a bunch of patches successfully until it hit the following 3 patches:
    119060-17 ---- X11 6.6.2_x86: Xsun patch
    122213-10 ---- GNOME 2.6.0_x86: GNOME Desktop Patch
    122912-02 ---- SunOS 5.10_x86: Apache 1.3 Patch
    All 3 failed some kind of validation and then crashed the pprosvc program, at which point it exited with the following error:
    122912-02 cannot be validated
    119060-17 cannot be validated
    122912-02 cannot be validated
    Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digital signature(s).
    I also tried to use the GUI Update Manager to update, hoping the problem was isolated to pprosvc, but that problem was also in the GUI with a similar error message:
    Error occurred...The detailed error message is: Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digitial signature(s)
    Anyone know why Sun's update patch process is so troublesome?
    Getting Tired of Solaris Updates...
    I should mention that this is the free solaris 10 x86 install and i don't have a service contract with Sun. If this problem persists, i don't think i'll get one, as i see only further problems after buying one.
    tired and confused

    Hi,
    There is an issue with this that is currently being investigated. There is another thread that may shed some light on what is happening here;
    http://forum.sun.com/jive/forum.jspa?forumID=316
    Thread title is : Sun UC, Digitally Signed Patches Using New Verisign Certificates
    In the short-term please ensure that the patch mentioned in it is installed.
    To quote part of mentioned thread above:
    "Once the Sun Update Connection client software is upgraded with patch 121118-06 (SPARC) or 121119-06 (x86/x64) or later revisions normal behavior will resume. "
    If this fails to resolve your problem, would you be kind enough to post the output of the following command for analysis please;
    # showrev -p | egrep -e '121454|121119|120336|121082|121564|122232|119789'
    Sincerely,
    Moderator.
    Message was edited by:
    ForumModerator

  • Last kernel patch for Solaris 10 x86 screwed up my kernel

    Hi,
    The last kernel patch for Solaris 10 x86 (sorry I can�t remember the patch id, but the revision is 30), available from Sun Update Manager screwed up my system.
    The system is still booting but in maintenance mode: smf can't start because of repository corrupted. Given instructions to restore the repository does not work because / filesystem is mounted read-only...
    As I am not a solaris expert, I will reinstall it from CD. I hope I won't loose the filesystem.
    I was used to blindly trust Sun solaris patches, that was a mistake.
    Laurent.

    i dont know why but still i do get default log in into the single mode
    after startup
    Requesting maintenance mode
    (See /lib/svc/share/README for aditional information. )
    Root password for system maintenance (control-d to bypass):i did removed the patch installed before so now
    SunOS jorgito 5.10 Generic_118844-26 i86pc i386 i86pcand finaly i do have milestone like this
    bash-3.00$ svcprop restarter | grep mile
    options/milestone astring svc:/milestone/multi-user:default
    dont know what to do else, also tried to synchronize boot-archive from solaris failsafe ...

Maybe you are looking for

  • Urgent : Deleting a row in a sql report region

    Hi I have an SQL report, i must have an icon "delete row", when clicing this icon the row must be deleted from the report, what I have do but not sure of this : in my query I am containing some html in witch I have an icon, when the user click on thi

  • Error while Starting resin in Sun Solaris 10

    Hi, While starting resin through httpd.sh script I am getting the following error Invalid initial heap size: -Xms128m-Xmx256m Could not create the Java virtual machine. I have tried with all the options of 256m 512m,but still it throws the error Can

  • Mac iTunes won't open; error 13010

    Running the newly updated iTunes on my Mac; the one with Genius support (not sure if I actually like that feature or not); anyway, I was in the midst of synching with my iPod shuffle when my Mac indicated that I needed to hold down the "Power" key, w

  • How to uninstall messenger mac

    how does one uninstall messenger mac?

  • My Apple Mobile decive doesn't recognise my iPhone and refuses to start.

    My Apple Mobile device doesn't recognise my iPhone and refuses to start, I've tried all the trouble shooting options on here and none of them have worked, culd someone help me out please?