Panoramic issues

I seem to be having troubles taking panoramas on my iPhone 5 after this iOS 7 update. Os there something in my settings that might fix this? Like they just won't work. And I can't set panoramas as backgrounds and have them move.

I'm also having similar issues on my iPhone 5. Panorama will open but as soon as I start to move the phone it takes a picture and stops. I made sure the arrow was on the line and that I move very slow but it continues to stop right after movement begins.

Similar Messages

Camera app panorama issue

So, i have a problem with shooting panorama with the camera.app for a few months already
When i press shoot and start moving phone in the right direction (according to the arrow and horizontal line navigation), first it goes smoothly but after some degrees of rotation it suddenly starts going down as if i move my iphone down (but im really not doing that). I tried many times with reopening the camera app and even hard resetting the phone, but it still not working properly.
I have the iphone 5 if it will help and i have never had it dropped
What can u advise and does someone have this issue? Cause i really couldnt find the same

Thanks anyway. It's not that big of a deal because it happens rarely to have someone call me when camera is opened but I've wanted to know if I'm the only one experiencing this. If you could, please try it to see if this happens to you too.
Have a great day!

Panorama Issues

I recently started using Photoshop CS5. I attempted doing my first panorama last night using photomerge but at the end the image displayed was split in two. It was a 5 shot panorama, I use a Mac. I used different modes of photo merge other than "auto" but the results were the same. Screen shot is attached.Is there a setting that I have wrong? I am new to CS5 so still learning. Anyway to fix this? Thanks,
Ray

You can try. Widen the canvas to accommodate the smaller image alongside the larger one. Select the smaller image and Cmd+J to place it on a layer above. Use the Move tool, assisted by by the keyboard arrow keys to position the small unit. To help in adjusting register, reduce the opacity of the small unit layer as you position the smaller element. Then, when satisfied return to 100% Opacity. (You may have to use Edit > Transform to modify the size of the small element for best results.

Anyone else have Navigon problems after iOS4 upgrade?

I have a problem with Panorama View 3D since the upgrade to iOS4. This worked perfectly prior to the upgrade. The problem is that the street names don't refresh after my car starts moving. It doesn't take long before the display is black with garbled text.
This is only a problem with Panorama view 3D (the extra I purchased for $9.99). Everything works fine in regular 3D mode.

Wrog wrote:
I hope they release 1.6 soon.
1.6 is in the works. "With the next NAVIGON update 1.6.0 for iPhone our MobileNavigator will be compatible with the new system software iOS4." http://www.youtube.com/watch?v=35UuWv6JRYg&feature=youtu.be
Navigon is aware of the Panorama issues: http://twitter.com/NAVIGON_US

Issue with html5 panoramas and objects

I have a problem in visualizing panoramas and objects on my website (www.dee-lay.com); all other browsers do not have this flickering problem ..is something about my mistake?

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Wifi Greyed on 4S & no Panorama option on camera

I purchased a 4s for the Mrs in February 13 and ever since she has had it the wifi option is greyed and no option of the Panorama in camera options although the 'grid' and 'hdr' options are there.
I have restored the phone from new, reset all settings, hard reset etc but nothing helps. Does anyone have a definitive resolution to this frustrating problem or is it a matter for Apple to replace the handset? On 6.1.3 at the moment

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement.

VZW Customer Service is a Joke (3332 Error Still A Huge Issue)

I've been using an old (original) Razr flip phone, and recently had the opportunity to purchase a (never used) Razr2 that missed the 3/2011 update. Before forking over a single penny, I googled the 3332 error. It brought me to these very pages where a very helpful Verizon employee (helpful Verizon employee being an oxymoron these days) named MikeS_VZW posted on several different threads about how to fix the 3332 error.
He posted a direct filepath for store employees to follow, and he also posted a list of phones that the flash would work for. (By the way, all those threads are now locked for some reason.) It was based on this information - a Verizon Wireless Employee posting on the Verizon Wireless Website, that I decided to fork over the money and buy this new phone.
So a few days ago I head to the Encino, CA store and am told that they don't have any computers at all that a phone can be hooked up to and that he didn't think any stores are able to flash phones. But he did go in back and call around. Turns out that the Flagship stores are still able to flash phones and that the nearest Flagship store was in Porter Ranch.
Today I went to the Porter Ranch, CA Verizon Wireless Flagship store. Upon entering I explain that I was sent there from Encino to have my phone flashed. I show him a printout of MikeS_VZW's filepath & instructions. The greeter tells me that he doesn't know why they keep sending people to his store but that he will have someone help me out.
Jean Carlo comes over and I explain the whole thing to him again. First thing that he tells me is that Encino could have done it saving me a extra 30 miles (15 miles each way). Well I say that they told me only Flagship stores could Flash my phone. He tells me Panorama City is also a Flagship store (and only about 4 miles away from me). But whatever, I'm already in the Porter Ranch Store...
I show him the printout and without looking at it he responds that he knows how to flash a phone. He then goes on to tell me that he can flash my phone but if it burns out, which has happened, then they aren't responsible and I would have to pay the insurance deductible to get a new phone.
Again, I WOULD HAVE TO PAY MONEY OUT OF MY POCKET, IF THE VERIZON WIRELESS FLAGSHIP STORE EMPLOYEE RUINED MY VERIZON PHONE WHILE TRYING TO GET IT TO PROPERLY WORK ON THE VERIZON WIRELESS NETWORK. Gotcha.
I told him to go ahead, because if it burned out then I would revert to my super old original Razr and then just wait it out til the end of my contract.
Ten or so minutes later and brings my phone back as it's still restarting and asks if there's anything else. I say no and he walks away. As soon as it restarts I try to download Backup Assistant and I of course get the 3332 Errror.
I go to find Jean Carlo, but he's with a customer...20-30 minutes later, I show him the printout of the filepath that he previously refused to look at and ask if that's the filepath he followed because I'm still getting the error message. He tells me to hold on, takes the printout and goes to talk to someone. 5-10 minutes later Benjamin the manager approaches me and says that they can't follow specific filepaths, they can only flash phones with whatever software they have on their computers which are sent to them by Verizon.
I explain that this is a fix posted to the Verizon Website, by a Verizon Employee and am told that there is nothing they can do and that I should call tech support.
As soon as I got in my car I called 611 customer service to complain about the runaround that I had gotten which resulted in nothing being done to fix the problem that Verizon themselves created. The cs rep (whose name I didn't get) told me that it sounded like an issue for tech support. So my call to complain about getting the runaround results in getting more runaround.
I was transferred to Buddy. I explained everything to him, told him about this forum and asked him to pull it up. He was unable to because their computers are very slow and the page kept timing out before it could load (VERY TELLING). He did mention though that anyone could post on the forums that MikeS_VZW might not be a Verizon employee. Buddy's solution was that he offered to replace my new phone (old, out of stock model, but still new and never before used) with a "like new" refurb. This option would 1) not cost me anything, and 2) not require a contract extension. The only 3 phone choices he gave me are all garbage. I wouldn't take any of those phones if I was offered free service to use them. And even if I were willing to try one out to see if it was acceptable, I'd have to send them my Razr2, so I'd be stuck with the garbage once it proved to be garbage. And since he was unable to pull up this forum to see that there is a fix, I asked to speak to a supervisor.
I was then transferred to Brandon. While his computer was super slow as well, he was able to open the forum and see the filepath that MikeS_VZW had posted. I asked him to verify that we are in agreement that MikeS_VZW is (or at least was) a Verizon employee. He conceded that it appeared that he was. A lot of back and forth later, he promised to call stores in my area to see if he could find one that could and would be able to fix my phone. But before he did that, I asked him if he was able to open the filepath that MikeS_VZW had listed. He tried and said that it had been moved to a different location. He looked to for in that new location and still no luck. Therefore, if he wasn't able to find it, what was the point of asking a store to follow a path to a destination that didn't exist.
That 611 call lasted 02h 01m 31s. Plus the 45m-1h I spent in the Porter Ranch. All for nothing. All because Verizon has obsolete information posted in it's help forums.
There was a reply to a (now locked) post dated as recently as February 13, 2013, a mere month ago, saying that they went into a store in Columbus Ohio, and that store was able to fix the problem. Why does one hand not know what the other one is doing.
Is there anyone else that has had this issue resolved recently?
I have been a Verizon Wireless customer for over 10 years, since before it was called Verizon Wireless (I started with Airtouch). Slowly but surely, year by year, month by month, and day by day, their service, as in customer service (not wireless service) has steadily gone downhill. They do not care about their customers. They only care about their customers money.
I have 3 phones in service with Verizon, and as soon as the contract expires on the last one in July, I'm dropping them as fast as they drop calls in the canyons.
Q: Why create that update in 3/2011 that removed functionality from all the basic/non-smartphones?
A: Cashmoney*
By removing functionality you force your customers to upgrade their phones. (Cashmoney)
By forcing your customers to upgrade their phones you force your customers to sign new 2-year contracts. (Cashmoney)
By forcing your customers to sign new 2-year contracts when you basically offer nothing but smartphones, you effectively force your customers to switch to a smartphone. (Cashmoney)
By forcing your customers to switch to a smartphone you force your customers to add data plans. (Cashmoney)
Q: Why start charging a $30 upgrade fee when it used to be free to upgrade?
A: Cashmoney
Dear Verizon, may I please please pretty please pay you $30 for the privilege to continue paying you every month? (Cashmoney)
Q: Why eliminate the unlimited data plan and move to an obtusely structured tier system?
A: Cashmoney
Hey Verizon, do you think there's any way it's possible for me to pay you more, but get way less? Why don't you guys look into that and see what you can come up with. (Cashmoney)
*Cashmoney - Corporate translation: Added revenue stream
Note: all the tags relating to this post (i.e. no_help_from_customer_service, money_hungry_company, cancel_contract, cancel_service) were already created by other users prior to me.
>Subject line edited to remove profanity<
Message was edited by: Verizon Moderator

1. Jim, the only reason my phone is "obsolete" is because Verizon decided to make it "obsolete". Otherwise, it makes and receives calls and texts without issue.
2. We are not all customers here, Verizon employees are constantly posting on these boards.
3. There was a post on a previous thread by a customer who had the issue resolved. That post was dated February 13, 2013. https://community.verizonwireless.com/thread/493678?start=122&tstart=0
4. You, personally, might not need to know what every single person said in every single discussion, but I wanted the Verizon employees that troll these boards to see what >Comment Deleted<they put their customers through.
5. >Comment deleted<
Message was edited by: Verizon Moderator

Best way to view a panorama

I was wondering what is the best way to view a panorama on the iPad?
The panoramas are NOT 360 degree. It is created by a digital camera, one of those which has this newer built-in sweep panorama mode, where you hold the camera and turn, and it snaps photos and stitches them together for you in the camer itself. And of course you can hold the camera in portrait or landscape mode and you will get a panorama with different dimensions this way.
So I import one of these panoramas into the default Photos app (after scaling it down in PS because obviously I don't need to see a 5000 something pixel wide pano on the iPad).
Anyhow. I think the iPad's Photos app displays panoramas in a rather stupid way. First, it just shrinks the pano so it fits the whole display. Then, if I double click it, it zooms into the panorama like 3 times or so, completely blowing up the pixels.
The only way I find is to zoom into the pano with two fingers, and then I can pan the photo left/right. I think this is rather lame way of doing it and was wondering if anyone has a better way to tackle this issue.
I am NOT interested in purchasing programs for the iPad that creates/stitches panoramas together for me. I want to create the panos with my digital camera, edit them and then import it to the iPad, which results just a simple photo, albeit much longer width then height. I'm just looking for a better way of looking at them on the iPad other then that mediocre default Photos app.
Thanks!

Here's a free viewer that can be used for panos on ipads even though it's a product viewer ... you would need the beta one that actually works on ipads with zoom support http://www.webrotate360.com/360-product-viewer.html

I continue to have a problem attempting to create Panorama with PE 7

Has anyone ever received and answer from Adobe for this problem that actually worked?
Updated
Sunday, November 1, 2009 12:39:26 PM PST
Opened
Wednesday, October 21, 2009 2:47:58 PM PDT
Status
Open - Pending Adobe Response
Product
Photoshop Elements 7.0
Support contract
Adobe Support Program
Subject
Panorama function does not work
Notes & responses
Notes from Customer
Sunday, November 1, 2009 12:39:26 PM PST
I followed your directions and closed all open files including "spySweeper" and "Norton". I went to "run" and entered %appdata% and
deleted "Adobe" NOTE: there was another file titled AdobeUM which I did not delete. I opened Adobe Elements and went to File->New
->Photomerge Panorama and immediately
got
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
I tried this several times from both the edit screen and the screen that shows the individual images and always got the same results
Notes from Customer
Friday, October 30, 2009 9:41:22 AM PDT
I have tried your suggested solution several times and it does not work......fortunately I have found another product that does work
and have moved on to it. I would like to know what is causing the problem particularly since a "lot" of other users are reporting
the same problem on the Internet.
Notes to Customer
Thursday, October 29, 2009 1:10:51 PM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
Our engineers hopefully will find the issue and post a document about it
in the Adobe Knowledge Base and/or release a fix.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Wednesday, October 28, 2009 5:10:30 PM PDT
I followed your instructions and still have exactly the same problem, but thanks for the attempt. I hope your engineers can find th
e problem as if you look on the internet a lot of other people are having exactly the same difficulty.
Notes to Customer
Wednesday, October 28, 2009 10:03:39 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I received your images and was able to reproduce your problem on my
machine several times and also triggered the same error even after
resaving the images using the "Save for Web" function.
Interestingly, after deleting the program's preferences, I was able to
use Photomerge successfully on your images and could not reproduce the
error.
Try the following and see if these steps fix the issue for you as well:
1. Close all open programs.
2. Click on Start > Run.
3. In the run dialog field, type: "%appdata%" [without the quotes].
4. Delete the Adobe folder shown there (this will delete all Adobe
software preferences and settings).
5. Close the window.
6. Launch Photoshop Elements Editor and try using the Photomerge command
on your images again.
The files are being forwarded to our engineers to see if they can
isolate why these images may corrupt or damage Photoshop Elements'
preferences and settings.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Tuesday, October 27, 2009 1:29:17 PM PDT
Second file
Notes to Customer
Tuesday, October 27, 2009 11:32:49 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
We show only one image uploaded to our Support Portal. Its file name is
Slide-2.jpg. We will need all the images that you are attempting to
merge uploaded to the Web Portal in order to test and to properly
investigate your issue.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Monday, October 26, 2009 5:40:57 PM PDT
Files used to attempt to create panorama are attached
Notes to Customer
Monday, October 26, 2009 4:05:05 PM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that even after using “Save For Web” that you got the same
error message when you attempted to use Photomerge.
I checked the attachments on the case and did not see the files that I
suggested you upload for our engineers to examine.
Could you please attach the files and we will then see if we can solve
your problem.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Monday, October 26, 2009 3:14:06 PM PDT
Will this help?
Notes from Customer
Monday, October 26, 2009 11:03:21 AM PDT
I tried the work around with the "save for web" and got the same message:
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
I can't believe with as many people as are having this problem that Adobe had not developed a solution and released it as a "bug" fi
x. I see that it is also a problem for people using Elements 8 and I can not imagine that is a very good endorsement for your new p
roduct.
Notes to Customer
Monday, October 26, 2009 10:28:41 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that when you attempt to use the Photomerge feature in
Photoshop Elements that you immediately get the errors:
Error 1: Unable to create Window
- OS error:[1400]
Line: 364
-> var w = new Window(res);
We have seen customer reports of this error and have the matter under
investigation.
Currently, it has been determined to be image specific and isolated to
problems processing the metadata in some images.
Our software engineers have been unable to isolate the exact issue with
these problematic images' metadata and have requested that people who
have images exhibiting this behavior be asked to upload them via the
Adobe Support Portal so that they can be examined.
Fortunately, we also do have a potential workaround that may allow you
to merge your images.
Try the following:
1. Open your images in Photoshop Elements Editor.
2. Save each one using the "Save for Web" command available in the File
menu in JPG format with the quality set to "High".
[This will remove all metadata from the images]
3. Close Photoshop Elements Editor and all open images.
4. Open the images that you just removed the metadata from using "Save
for Web" and use Photomerge on them.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Sunday, October 25, 2009 9:03:21 AM PDT
PLEASE!!!!!!!!!!!!!
Look here
http://forums.adobe.com/message/2275858#2275 858
Notes from Customer
Friday, October 23, 2009 2:42:48 PM PDT
When I go into Elements 7 and select File->New->Photomerge Panorama I get the message
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
and can not go any further. If you look at this on your Forum Site
http://forums.adobe.com/thread/362825 you will note that a lot of other users are having the same problem
or look here
http://www.elementsvillage.com/forums/showth read.php?t=44409
Same thing.
I even notice that people usiong Elements 8 are now having the problem.
Notes to Customer
Thursday, October 22, 2009 11:52:08 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that when you try to use the Panorama function in Elements,
you receive a message “unable to create window.”
Does this problem happen when you are trying to merge specific images or
does it happen with all images?
What size are the images you are trying to merge? What dimensions, dots
per inch, and file type are the images?
How many images are you trying to merge? Do you have the same problem
if you try merging just two images?
Make sure when you are going to do the photomerge that any extra
programs are closed. The merging process is rather memory intensive so
the less programs running at once, the better.
Try to resize each of the photos to a smaller size, and then retry the
command.
If you receive the error when saving a panorama, try flattening the file
(use the Layer>Flatten Image command), or save the panorama in the
smaller, JPEG format.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Scott K.
Adobe Web Support
Notes from Customer
Wednesday, October 21, 2009 2:47:58 PM PDT
When I try to use the panaroama function I get this message
Error 1; unable to create window
-Internal error
Line; 364
-> var w = new Window(res);
I have tried all the solutions from the forum and they do not work. I even bought a new copy of the program, but no luck.
The function worked before and then stoped working (I had a downloaded version of release 7) That prompted me to buy the new copy A
LL COPIES WERE PURCHASED BY ME
Operating System: Windows XP Home
Has it ever worked? If so, what's changed? (provide comments in description field): Yes
Same results with different file?: Yes
Same results with different computer?: Not Applicable
Recent System Hardware or Software change?: No

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Lightroom command edit merge to panorama in photoshop no longer working

Photoshop CS 6, 13.0.6.
Lightroom 6 version 5.0
Camera raw 8.1
On an iMac, OS 10.8.5
Working in LR, I select several images.
Photoshop is already open.
I'm trying to merge the images.
I've used the pull down under Photo edit in..merge to panorama in photoshop
hundreds of times!
Now suddenly, with nothing different that I can tell,it doesn't work.
Nothing happens.
Sometimes the photoshop window comes up but usually nothing.
What's wrong?

beverlyb - same issue (after trying the CS6 30 day trial on my machine with CS5). Interesting that it's an issue on Mac as well (I use win8.1). I had an Adobe engineer "take over" my PC and he/she was unable to fix it... Ugh! Really the main thing I use photoshop for. Can you do it manually (under File > automation > photomerge I think)?

Several severe Issues with the Nokia 808 (camera, ...

Hey Guys,
I was a avid user of the Nokia N8 with its amazin camera features. So i made the switch to the 808. While the initial Impression was awesome, when traveling over the last few days my experience wasn't that great. There are several in part very severe issues i am having:
1st and foremost: the cameras automatic shutter speed is too low for nearly every shot. No, my hands are not too shaky, I've doing professional photgraphs since 10 years now and am able to shoot with 1/10th and lower. Yet, when enjoying a boat tour in Copenhagen and taking pictures of the passing scenerey, nearly all images have noticeable motion blur due to the slooooow movement of the boat. And this in bright daylight. The only way to bypass this was by using the sports mode - but then again you are limited to 5 megapixels. You can also notice the very long shutter time when simply taking a picture of your local metro station. MOst of the people walking by have motion blur.
This brings me to issue number 2: I really don't get why i am unable to influence the focus method. You get the Landscape and Sports mode (which use a fixed focus) but that's not available in the creative mode. So even when doing simple panoramic shots in the creative mode in 5, 8 or 34 megapixels the camera has to focus. Problem here: when shooting panoramic stills the focus sometimes decides to focus on a nearby person instead of the 'big picture'.
Issue number 3: When manually selecting a very low ISO value (for decent night shots) the Camera makes that artificial shutter sound WAY before the shutter actually closes. Therefore you THINK that taking the picture is already done and move the camera around. This results in awful images
Issue number 4: Battery usage is way to high on the 808. I was able to take my N8 around town all day, shoot over 300 (Yes, 300) images, do a bit of navigation, email, browse and tak without the battery being drained below 15%. I ran out of battery with the 808 after only 136 images, 15 mins of Navigation, Wireless Lan and 3G turned OFF. So the entire point of having a device that combines phone and camera and lasts all day is simply gone I had usage times of 3-4 days with the N8 (when not on vacation) - the 808 is drained after the first night under the very same conditions.
To sum it up - i'd like to see the following things fixed/added:
- Behaviour of the automatic shutter
- Option to manually select shutter
- Option to select different focus methods (on / off ) in creative mode
- BATTERY USAGE NEEDS TO BE IMPROVED!
- black on white color theme for email
- ability to select multiple images in album view like before
- ability to get additional information on the image like with the n8 when you press and hold and select 'details'
- Ablity to turn of autofocus in video mode
- when deleting an email while reading the email, display the previous mail instead of the inbox
Would be great to get some feedback from you guys on that!
thanks
-daniel
Solved!
Go to Solution.

Hello…I own an 808 PureView device. At the outset, I must congratulate you for creating such a marvelous device. It’s in all dimensions a brilliant Smartphone and has no major lags except a few which I would like to mention as suggestions to improve the general smoothness and usefulness of its User Interface (henceforth-UI).
The in-built gallery lacks ‘mark multiple items’ option which, if integrated, can be fruitfully used to delete or send multiple items though Bluetooth. Also, the in-built gallery lacks ‘renaming’ function which would otherwise be helpful in organizing the gallery items, and in giving custom names which are easy to remember and deal with.
The generic MUSIC PLAYER lacks the track/music search function from within the music player, and so, to search a song out of the vast collection, the user has to use the generic SEARCH application by exiting or minimizing the music player, which in itself is a cumbersome exercise. The search function, if integrated into the music player, will help a great deal in making the music experience really customized and precise as also time saving.
The in-built VIDEO editing options available in the video viewing dashboard are relatively much naïve and rudimentary as compared to PureView’s lesser predecessor, the N8. Now, since 808 is a full-fledged camera Smartphone, it is bit logical on part of the user to expect the video editing dashboard to be as efficient and complete as the photo editing dashboard of the same is. Advance options like adding music clip can be added to the video editing console to mitigate the need of using any third party application to do so, and thus, it will further enhance the utility drawn from the cell-phone UI in terms of video editing and viewing.
The generic MESSAGING application has the default view as CONVERSATIONS view and manual selection every time is required to switch the view to FOLDERS mode. If there had been an option to make a choice in setting the folders view or the conversations view as default as per users convenience, it would have been again a smooth messaging experience.
To end up, the generic CONTACT application lacks the facility to edit the contact labels unlike the one which was available in S60 V3 devices (I owned N79 prior to owing 808 PureView and so I am well aware of this utility). Facility to edit the contact labels makes it easy to differentiate between multiple contact numbers of the same contact so as to have an ease of remembrance and clarity of use.
I earnestly hope that Nokia will incorporate some or all of these suggestions in the next-to-come firmware upgrade for Belle FP1 devices. These modifications/additions, if done and made, will make the Belle OS fully competent with its various other contemporaries as it just lacks these things but otherwise is a fluid and extremely useful OS. I request you to kindly pay due heed and consideration to my observations and work towards making the Belle OS an all-encompassing mobile platform. Thanking You.

Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
Dave

Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Panoramas in iPhoto '09

A. When I would make a panorama, here's the steps I took:
1. Take pictures with my camera.
2. Import into iPhoto'09.
3. Assign titles to pictures and export into folder on desktop.
4. Open Adobe Photoshop Elements 6 and import photos from desktop folder.
5. Let APE 6 create panorama and then save it back to the desktop folder.
6. Import it using iPhoto'09. Edit it using enhance, crop, straighten, and adjust if necessary. It worked perfectly.
B. I updated to Snow Leopard. When I imported it into iPhoto'09 and did the normal edit's everything slightly changed. As you can see in the attached movie the finished panorama would change sizes. I assumed that it was an interacting between iPhoto'09, Adobe Photoshop Elements 6 and Snow Leopard. So, I ordered Adobe Photoshop Elements 8. NOTE: I cannot add a movie file, but I did add it to the same question in the Adobe forums.
C. I installed Adobe Photoshop Elements 8 and it's still doing the same thing. Note it only changes size when I click on a panorama picture. The 3rd picture was a normal size single picture.
D. I have an Early 2009 24 inch iMac (2.93 GHz, Intel Core 2 Duo) running OSX 10.6.1.
E. Anyone have any suggestions or did you have the same problem and what corrections did you do?

See if you can straighten the photo with PSE before importing into iPhoto and then do just the other edits, crop. adjust, in iPhoto. See if that will avoid the problem.
Do you have a Canon camera? If so there's an application, PhotoStitch, that came with the camera and that may create panoramas that don't have issues with iPhoto.

Adobe Photoshop CS6 unable to process more than 10 Images for Panoramic

I have Adobe Photoshop CS6 with latest patches installed and cannot create a panoramic picture from 18 photos (360 degrees). I can get it to work with a maximum of 10 photos. Photoshop Elements 12 works fine on another identical computer, but not CS6. Is there a work around or a problem or known bug? How do I resolve the issue?
System is an
HP DC8300 Core i5 System with 4GB of memory on Windows 7 32bit Enterprise Edition

4 GB of RAM? for a 10 pict panorama? Ouch!

Lightroom link to PS Panorama merge Not working with Photoshop CC 2014 upgrade

I recently received an upgrade to PS CC to PS CC2014. After Upgrading I now notice the Option in Lightroom 5.5 to edit in PS and merge to Panorama is no longer working.
When used, PS program starts, but does not con tune with the script to load existing files and merge into a panorama image.
Does PS CC 2014 use a different script? as it seems to be failing.
Has anyone else had this issue, is there a fix coming?

This worked for me, and a simple solution...
Start PS - restart LR :-)

Panoramic issues

Similar Messages

Maybe you are looking for